d26285f873
SD8688 is a WLAN/Bluetooth combo chip and both functions are supported in a single firmware image. FUNC_INIT and FUNC_SHUTDOWN commands are implemented to utilize the multiple function feature. When SD8688 card is inserted, the firmware image should be downloaded only once through either WLAN function (Libertas driver) or Bluetooth function (Bluetooth driver). This patch adds function init/shutdown for SD8688 WLAN function only. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
306 lines
9.6 KiB
C
306 lines
9.6 KiB
C
/**
|
|
* This file contains definitions of WLAN commands.
|
|
*/
|
|
|
|
#ifndef _LBS_HOST_H_
|
|
#define _LBS_HOST_H_
|
|
|
|
/** PUBLIC DEFINITIONS */
|
|
#define DEFAULT_AD_HOC_CHANNEL 6
|
|
#define DEFAULT_AD_HOC_CHANNEL_A 36
|
|
|
|
#define CMD_OPTION_WAITFORRSP 0x0002
|
|
|
|
/** Host command IDs */
|
|
|
|
/* Return command are almost always the same as the host command, but with
|
|
* bit 15 set high. There are a few exceptions, though...
|
|
*/
|
|
#define CMD_RET(cmd) (0x8000 | cmd)
|
|
|
|
/* Return command convention exceptions: */
|
|
#define CMD_RET_802_11_ASSOCIATE 0x8012
|
|
|
|
/* Command codes */
|
|
#define CMD_GET_HW_SPEC 0x0003
|
|
#define CMD_EEPROM_UPDATE 0x0004
|
|
#define CMD_802_11_RESET 0x0005
|
|
#define CMD_802_11_SCAN 0x0006
|
|
#define CMD_802_11_GET_LOG 0x000b
|
|
#define CMD_MAC_MULTICAST_ADR 0x0010
|
|
#define CMD_802_11_AUTHENTICATE 0x0011
|
|
#define CMD_802_11_EEPROM_ACCESS 0x0059
|
|
#define CMD_802_11_ASSOCIATE 0x0050
|
|
#define CMD_802_11_SET_WEP 0x0013
|
|
#define CMD_802_11_GET_STAT 0x0014
|
|
#define CMD_802_3_GET_STAT 0x0015
|
|
#define CMD_802_11_SNMP_MIB 0x0016
|
|
#define CMD_MAC_REG_MAP 0x0017
|
|
#define CMD_BBP_REG_MAP 0x0018
|
|
#define CMD_MAC_REG_ACCESS 0x0019
|
|
#define CMD_BBP_REG_ACCESS 0x001a
|
|
#define CMD_RF_REG_ACCESS 0x001b
|
|
#define CMD_802_11_RADIO_CONTROL 0x001c
|
|
#define CMD_802_11_RF_CHANNEL 0x001d
|
|
#define CMD_802_11_RF_TX_POWER 0x001e
|
|
#define CMD_802_11_RSSI 0x001f
|
|
#define CMD_802_11_RF_ANTENNA 0x0020
|
|
#define CMD_802_11_PS_MODE 0x0021
|
|
#define CMD_802_11_DATA_RATE 0x0022
|
|
#define CMD_RF_REG_MAP 0x0023
|
|
#define CMD_802_11_DEAUTHENTICATE 0x0024
|
|
#define CMD_802_11_REASSOCIATE 0x0025
|
|
#define CMD_MAC_CONTROL 0x0028
|
|
#define CMD_802_11_AD_HOC_START 0x002b
|
|
#define CMD_802_11_AD_HOC_JOIN 0x002c
|
|
#define CMD_802_11_QUERY_TKIP_REPLY_CNTRS 0x002e
|
|
#define CMD_802_11_ENABLE_RSN 0x002f
|
|
#define CMD_802_11_SET_AFC 0x003c
|
|
#define CMD_802_11_GET_AFC 0x003d
|
|
#define CMD_802_11_AD_HOC_STOP 0x0040
|
|
#define CMD_802_11_HOST_SLEEP_CFG 0x0043
|
|
#define CMD_802_11_WAKEUP_CONFIRM 0x0044
|
|
#define CMD_802_11_HOST_SLEEP_ACTIVATE 0x0045
|
|
#define CMD_802_11_BEACON_STOP 0x0049
|
|
#define CMD_802_11_MAC_ADDRESS 0x004d
|
|
#define CMD_802_11_LED_GPIO_CTRL 0x004e
|
|
#define CMD_802_11_EEPROM_ACCESS 0x0059
|
|
#define CMD_802_11_BAND_CONFIG 0x0058
|
|
#define CMD_GSPI_BUS_CONFIG 0x005a
|
|
#define CMD_802_11D_DOMAIN_INFO 0x005b
|
|
#define CMD_802_11_KEY_MATERIAL 0x005e
|
|
#define CMD_802_11_SLEEP_PARAMS 0x0066
|
|
#define CMD_802_11_INACTIVITY_TIMEOUT 0x0067
|
|
#define CMD_802_11_SLEEP_PERIOD 0x0068
|
|
#define CMD_802_11_TPC_CFG 0x0072
|
|
#define CMD_802_11_PA_CFG 0x0073
|
|
#define CMD_802_11_FW_WAKE_METHOD 0x0074
|
|
#define CMD_802_11_SUBSCRIBE_EVENT 0x0075
|
|
#define CMD_802_11_RATE_ADAPT_RATESET 0x0076
|
|
#define CMD_802_11_TX_RATE_QUERY 0x007f
|
|
#define CMD_GET_TSF 0x0080
|
|
#define CMD_BT_ACCESS 0x0087
|
|
#define CMD_FWT_ACCESS 0x0095
|
|
#define CMD_802_11_MONITOR_MODE 0x0098
|
|
#define CMD_MESH_ACCESS 0x009b
|
|
#define CMD_MESH_CONFIG_OLD 0x00a3
|
|
#define CMD_MESH_CONFIG 0x00ac
|
|
#define CMD_SET_BOOT2_VER 0x00a5
|
|
#define CMD_FUNC_INIT 0x00a9
|
|
#define CMD_FUNC_SHUTDOWN 0x00aa
|
|
#define CMD_802_11_BEACON_CTRL 0x00b0
|
|
|
|
/* For the IEEE Power Save */
|
|
#define CMD_SUBCMD_ENTER_PS 0x0030
|
|
#define CMD_SUBCMD_EXIT_PS 0x0031
|
|
#define CMD_SUBCMD_SLEEP_CONFIRMED 0x0034
|
|
#define CMD_SUBCMD_FULL_POWERDOWN 0x0035
|
|
#define CMD_SUBCMD_FULL_POWERUP 0x0036
|
|
|
|
#define CMD_ENABLE_RSN 0x0001
|
|
#define CMD_DISABLE_RSN 0x0000
|
|
|
|
#define CMD_ACT_GET 0x0000
|
|
#define CMD_ACT_SET 0x0001
|
|
#define CMD_ACT_GET_AES 0x0002
|
|
#define CMD_ACT_SET_AES 0x0003
|
|
#define CMD_ACT_REMOVE_AES 0x0004
|
|
|
|
/* Define action or option for CMD_802_11_SET_WEP */
|
|
#define CMD_ACT_ADD 0x0002
|
|
#define CMD_ACT_REMOVE 0x0004
|
|
#define CMD_ACT_USE_DEFAULT 0x0008
|
|
|
|
#define CMD_TYPE_WEP_40_BIT 0x01
|
|
#define CMD_TYPE_WEP_104_BIT 0x02
|
|
|
|
#define CMD_NUM_OF_WEP_KEYS 4
|
|
|
|
#define CMD_WEP_KEY_INDEX_MASK 0x3fff
|
|
|
|
/* Define action or option for CMD_802_11_RESET */
|
|
#define CMD_ACT_HALT 0x0003
|
|
|
|
/* Define action or option for CMD_802_11_SCAN */
|
|
#define CMD_BSS_TYPE_BSS 0x0001
|
|
#define CMD_BSS_TYPE_IBSS 0x0002
|
|
#define CMD_BSS_TYPE_ANY 0x0003
|
|
|
|
/* Define action or option for CMD_802_11_SCAN */
|
|
#define CMD_SCAN_TYPE_ACTIVE 0x0000
|
|
#define CMD_SCAN_TYPE_PASSIVE 0x0001
|
|
|
|
#define CMD_SCAN_RADIO_TYPE_BG 0
|
|
|
|
#define CMD_SCAN_PROBE_DELAY_TIME 0
|
|
|
|
/* Define action or option for CMD_MAC_CONTROL */
|
|
#define CMD_ACT_MAC_RX_ON 0x0001
|
|
#define CMD_ACT_MAC_TX_ON 0x0002
|
|
#define CMD_ACT_MAC_LOOPBACK_ON 0x0004
|
|
#define CMD_ACT_MAC_WEP_ENABLE 0x0008
|
|
#define CMD_ACT_MAC_INT_ENABLE 0x0010
|
|
#define CMD_ACT_MAC_MULTICAST_ENABLE 0x0020
|
|
#define CMD_ACT_MAC_BROADCAST_ENABLE 0x0040
|
|
#define CMD_ACT_MAC_PROMISCUOUS_ENABLE 0x0080
|
|
#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE 0x0100
|
|
#define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE 0x0400
|
|
|
|
/* Event flags for CMD_802_11_SUBSCRIBE_EVENT */
|
|
#define CMD_SUBSCRIBE_RSSI_LOW 0x0001
|
|
#define CMD_SUBSCRIBE_SNR_LOW 0x0002
|
|
#define CMD_SUBSCRIBE_FAILCOUNT 0x0004
|
|
#define CMD_SUBSCRIBE_BCNMISS 0x0008
|
|
#define CMD_SUBSCRIBE_RSSI_HIGH 0x0010
|
|
#define CMD_SUBSCRIBE_SNR_HIGH 0x0020
|
|
|
|
#define RADIO_PREAMBLE_LONG 0x00
|
|
#define RADIO_PREAMBLE_SHORT 0x02
|
|
#define RADIO_PREAMBLE_AUTO 0x04
|
|
|
|
/* Define action or option for CMD_802_11_RF_CHANNEL */
|
|
#define CMD_OPT_802_11_RF_CHANNEL_GET 0x00
|
|
#define CMD_OPT_802_11_RF_CHANNEL_SET 0x01
|
|
|
|
/* Define action or option for CMD_802_11_DATA_RATE */
|
|
#define CMD_ACT_SET_TX_AUTO 0x0000
|
|
#define CMD_ACT_SET_TX_FIX_RATE 0x0001
|
|
#define CMD_ACT_GET_TX_RATE 0x0002
|
|
|
|
#define CMD_ACT_SET_RX 0x0001
|
|
#define CMD_ACT_SET_TX 0x0002
|
|
#define CMD_ACT_SET_BOTH 0x0003
|
|
#define CMD_ACT_GET_RX 0x0004
|
|
#define CMD_ACT_GET_TX 0x0008
|
|
#define CMD_ACT_GET_BOTH 0x000c
|
|
|
|
/* Define action or option for CMD_802_11_PS_MODE */
|
|
#define CMD_TYPE_CAM 0x0000
|
|
#define CMD_TYPE_MAX_PSP 0x0001
|
|
#define CMD_TYPE_FAST_PSP 0x0002
|
|
|
|
/* Options for CMD_802_11_FW_WAKE_METHOD */
|
|
#define CMD_WAKE_METHOD_UNCHANGED 0x0000
|
|
#define CMD_WAKE_METHOD_COMMAND_INT 0x0001
|
|
#define CMD_WAKE_METHOD_GPIO 0x0002
|
|
|
|
/* Object IDs for CMD_802_11_SNMP_MIB */
|
|
#define SNMP_MIB_OID_BSS_TYPE 0x0000
|
|
#define SNMP_MIB_OID_OP_RATE_SET 0x0001
|
|
#define SNMP_MIB_OID_BEACON_PERIOD 0x0002 /* Reserved on v9+ */
|
|
#define SNMP_MIB_OID_DTIM_PERIOD 0x0003 /* Reserved on v9+ */
|
|
#define SNMP_MIB_OID_ASSOC_TIMEOUT 0x0004 /* Reserved on v9+ */
|
|
#define SNMP_MIB_OID_RTS_THRESHOLD 0x0005
|
|
#define SNMP_MIB_OID_SHORT_RETRY_LIMIT 0x0006
|
|
#define SNMP_MIB_OID_LONG_RETRY_LIMIT 0x0007
|
|
#define SNMP_MIB_OID_FRAG_THRESHOLD 0x0008
|
|
#define SNMP_MIB_OID_11D_ENABLE 0x0009
|
|
#define SNMP_MIB_OID_11H_ENABLE 0x000A
|
|
|
|
/* Define action or option for CMD_BT_ACCESS */
|
|
enum cmd_bt_access_opts {
|
|
/* The bt commands start at 5 instead of 1 because the old dft commands
|
|
* are mapped to 1-4. These old commands are no longer maintained and
|
|
* should not be called.
|
|
*/
|
|
CMD_ACT_BT_ACCESS_ADD = 5,
|
|
CMD_ACT_BT_ACCESS_DEL,
|
|
CMD_ACT_BT_ACCESS_LIST,
|
|
CMD_ACT_BT_ACCESS_RESET,
|
|
CMD_ACT_BT_ACCESS_SET_INVERT,
|
|
CMD_ACT_BT_ACCESS_GET_INVERT
|
|
};
|
|
|
|
/* Define action or option for CMD_FWT_ACCESS */
|
|
enum cmd_fwt_access_opts {
|
|
CMD_ACT_FWT_ACCESS_ADD = 1,
|
|
CMD_ACT_FWT_ACCESS_DEL,
|
|
CMD_ACT_FWT_ACCESS_LOOKUP,
|
|
CMD_ACT_FWT_ACCESS_LIST,
|
|
CMD_ACT_FWT_ACCESS_LIST_ROUTE,
|
|
CMD_ACT_FWT_ACCESS_LIST_NEIGHBOR,
|
|
CMD_ACT_FWT_ACCESS_RESET,
|
|
CMD_ACT_FWT_ACCESS_CLEANUP,
|
|
CMD_ACT_FWT_ACCESS_TIME,
|
|
};
|
|
|
|
/* Define action or option for CMD_802_11_HOST_SLEEP_CFG */
|
|
enum cmd_wol_cfg_opts {
|
|
CMD_ACT_ACTION_NONE = 0,
|
|
CMD_ACT_SET_WOL_RULE,
|
|
CMD_ACT_GET_WOL_RULE,
|
|
CMD_ACT_RESET_WOL_RULE,
|
|
};
|
|
|
|
/* Define action or option for CMD_MESH_ACCESS */
|
|
enum cmd_mesh_access_opts {
|
|
CMD_ACT_MESH_GET_TTL = 1,
|
|
CMD_ACT_MESH_SET_TTL,
|
|
CMD_ACT_MESH_GET_STATS,
|
|
CMD_ACT_MESH_GET_ANYCAST,
|
|
CMD_ACT_MESH_SET_ANYCAST,
|
|
CMD_ACT_MESH_SET_LINK_COSTS,
|
|
CMD_ACT_MESH_GET_LINK_COSTS,
|
|
CMD_ACT_MESH_SET_BCAST_RATE,
|
|
CMD_ACT_MESH_GET_BCAST_RATE,
|
|
CMD_ACT_MESH_SET_RREQ_DELAY,
|
|
CMD_ACT_MESH_GET_RREQ_DELAY,
|
|
CMD_ACT_MESH_SET_ROUTE_EXP,
|
|
CMD_ACT_MESH_GET_ROUTE_EXP,
|
|
CMD_ACT_MESH_SET_AUTOSTART_ENABLED,
|
|
CMD_ACT_MESH_GET_AUTOSTART_ENABLED,
|
|
CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT = 17,
|
|
};
|
|
|
|
/* Define actions and types for CMD_MESH_CONFIG */
|
|
enum cmd_mesh_config_actions {
|
|
CMD_ACT_MESH_CONFIG_STOP = 0,
|
|
CMD_ACT_MESH_CONFIG_START,
|
|
CMD_ACT_MESH_CONFIG_SET,
|
|
CMD_ACT_MESH_CONFIG_GET,
|
|
};
|
|
|
|
enum cmd_mesh_config_types {
|
|
CMD_TYPE_MESH_SET_BOOTFLAG = 1,
|
|
CMD_TYPE_MESH_SET_BOOTTIME,
|
|
CMD_TYPE_MESH_SET_DEF_CHANNEL,
|
|
CMD_TYPE_MESH_SET_MESH_IE,
|
|
CMD_TYPE_MESH_GET_DEFAULTS,
|
|
CMD_TYPE_MESH_GET_MESH_IE, /* GET_DEFAULTS is superset of GET_MESHIE */
|
|
};
|
|
|
|
/** Card Event definition */
|
|
#define MACREG_INT_CODE_TX_PPA_FREE 0
|
|
#define MACREG_INT_CODE_TX_DMA_DONE 1
|
|
#define MACREG_INT_CODE_LINK_LOST_W_SCAN 2
|
|
#define MACREG_INT_CODE_LINK_LOST_NO_SCAN 3
|
|
#define MACREG_INT_CODE_LINK_SENSED 4
|
|
#define MACREG_INT_CODE_CMD_FINISHED 5
|
|
#define MACREG_INT_CODE_MIB_CHANGED 6
|
|
#define MACREG_INT_CODE_INIT_DONE 7
|
|
#define MACREG_INT_CODE_DEAUTHENTICATED 8
|
|
#define MACREG_INT_CODE_DISASSOCIATED 9
|
|
#define MACREG_INT_CODE_PS_AWAKE 10
|
|
#define MACREG_INT_CODE_PS_SLEEP 11
|
|
#define MACREG_INT_CODE_MIC_ERR_MULTICAST 13
|
|
#define MACREG_INT_CODE_MIC_ERR_UNICAST 14
|
|
#define MACREG_INT_CODE_WM_AWAKE 15
|
|
#define MACREG_INT_CODE_DEEP_SLEEP_AWAKE 16
|
|
#define MACREG_INT_CODE_ADHOC_BCN_LOST 17
|
|
#define MACREG_INT_CODE_HOST_AWAKE 18
|
|
#define MACREG_INT_CODE_STOP_TX 19
|
|
#define MACREG_INT_CODE_START_TX 20
|
|
#define MACREG_INT_CODE_CHANNEL_SWITCH 21
|
|
#define MACREG_INT_CODE_MEASUREMENT_RDY 22
|
|
#define MACREG_INT_CODE_WMM_CHANGE 23
|
|
#define MACREG_INT_CODE_BG_SCAN_REPORT 24
|
|
#define MACREG_INT_CODE_RSSI_LOW 25
|
|
#define MACREG_INT_CODE_SNR_LOW 26
|
|
#define MACREG_INT_CODE_MAX_FAIL 27
|
|
#define MACREG_INT_CODE_RSSI_HIGH 28
|
|
#define MACREG_INT_CODE_SNR_HIGH 29
|
|
#define MACREG_INT_CODE_MESH_AUTO_STARTED 35
|
|
#define MACREG_INT_CODE_FIRMWARE_READY 48
|
|
|
|
#endif
|