kevin/linux
1
Fork 0
Code
5ae08f80ec
linux/drivers/serial/mpsc.c
Alan Cox 33f0f88f1c [PATCH] TTY layer buffering revamp 
The API and code have been through various bits of initial review by
serial driver people but they definitely need to live somewhere for a
while so the unconverted drivers can get knocked into shape, existing
drivers that have been updated can be better tuned and bugs whacked out.

This replaces the tty flip buffers with kmalloc objects in rings. In the
normal situation for an IRQ driven serial port at typical speeds the
behaviour is pretty much the same, two buffers end up allocated and the
kernel cycles between them as before.

When there are delays or at high speed we now behave far better as the
buffer pool can grow a bit rather than lose characters. This also means
that we can operate at higher speeds reliably.

For drivers that receive characters in blocks (DMA based, USB and
especially virtualisation) the layer allows a lot of driver specific
code that works around the tty layer with private secondary queues to be
removed. The IBM folks need this sort of layer, the smart serial port
people do, the virtualisers do (because a virtualised tty typically
operates at infinite speed rather than emulating 9600 baud).

Finally many drivers had invalid and unsafe attempts to avoid buffer
overflows by directly invoking tty methods extracted out of the innards
of work queue structs. These are no longer needed and all go away. That
fixes various random hangs with serial ports on overflow.

The other change in here is to optimise the receive_room path that is
used by some callers. It turns out that only one ldisc uses receive room
except asa constant and it updates it far far less than the value is
read. We thus make it a variable not a function call.

I expect the code to contain bugs due to the size alone but I'll be
watching and squashing them and feeding out new patches as it goes.

Because the buffers now dynamically expand you should only run out of
buffering when the kernel runs out of memory for real.  That means a lot of
the horrible hacks high performance drivers used to do just aren't needed any
more.

Description:

tty_insert_flip_char is an old API and continues to work as before, as does
tty_flip_buffer_push() [this is why many drivers dont need modification].  It
does now also return the number of chars inserted

There are also

tty_buffer_request_room(tty, len)

which asks for a buffer block of the length requested and returns the space
found.  This improves efficiency with hardware that knows how much to
transfer.

and tty_insert_flip_string_flags(tty, str, flags, len)

to insert a string of characters and flags

For a smart interface the usual code is

    len = tty_request_buffer_room(tty, amount_hardware_says);
    tty_insert_flip_string(tty, buffer_from_card, len);

More description!

At the moment tty buffers are attached directly to the tty.  This is causing a
lot of the problems related to tty layer locking, also problems at high speed
and also with bursty data (such as occurs in virtualised environments)

I'm working on ripping out the flip buffers and replacing them with a pool of
dynamically allocated buffers.  This allows both for old style "byte I/O"
devices and also helps virtualisation and smart devices where large blocks of
data suddenely materialise and need storing.

So far so good.  Lots of drivers reference tty->flip.*.  Several of them also
call directly and unsafely into function pointers it provides.  This will all
break.  Most drivers can use tty_insert_flip_char which can be kept as an API
but others need more.

At the moment I've added the following interfaces, if people think more will
be needed now is a good time to say

 int tty_buffer_request_room(tty, size)

Try and ensure at least size bytes are available, returns actual room (may be
zero).  At the moment it just uses the flipbuf space but that will change.
Repeated calls without characters being added are not cumulative.  (ie if you
call it with 1, 1, 1, and then 4 you'll have four characters of space.  The
other functions will also try and grow buffers in future but this will be a
more efficient way when you know block sizes.

 int tty_insert_flip_char(tty, ch, flag)

As before insert a character if there is room.  Now returns 1 for success, 0
for failure.

 int tty_insert_flip_string(tty, str, len)

Insert a block of non error characters.  Returns the number inserted.

 int tty_prepare_flip_string(tty, strptr, len)

Adjust the buffer to allow len characters to be added.  Returns a buffer
pointer in strptr and the length available.  This allows for hardware that
needs to use functions like insl or mencpy_fromio.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: John Hawkes <hawkes@sgi.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:59 -08:00

1831 lines
44 KiB
C
Raw Blame History

/*
* drivers/serial/mpsc.c
*
* Generic driver for the MPSC (UART mode) on Marvell parts (e.g., GT64240,
* GT64260, MV64340, MV64360, GT96100, ... ).
*
* Author: Mark A. Greer <mgreer@mvista.com>
*
* Based on an old MPSC driver that was in the linuxppc tree. It appears to
* have been created by Chris Zankel (formerly of MontaVista) but there
* is no proper Copyright so I'm not sure. Apparently, parts were also
* taken from PPCBoot (now U-Boot). Also based on drivers/serial/8250.c
* by Russell King.
*
* 2004 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
/*
* The MPSC interface is much like a typical network controller's interface.
* That is, you set up separate rings of descriptors for transmitting and
* receiving data. There is also a pool of buffers with (one buffer per
* descriptor) that incoming data are dma'd into or outgoing data are dma'd
* out of.
*
* The MPSC requires two other controllers to be able to work. The Baud Rate
* Generator (BRG) provides a clock at programmable frequencies which determines
* the baud rate. The Serial DMA Controller (SDMA) takes incoming data from the
* MPSC and DMA's it into memory or DMA's outgoing data and passes it to the
* MPSC. It is actually the SDMA interrupt that the driver uses to keep the
* transmit and receive "engines" going (i.e., indicate data has been
* transmitted or received).
*
* NOTES:
*
* 1) Some chips have an erratum where several regs cannot be
* read. To work around that, we keep a local copy of those regs in
* 'mpsc_port_info'.
*
* 2) Some chips have an erratum where the ctlr will hang when the SDMA ctlr
* accesses system mem with coherency enabled. For that reason, the driver
* assumes that coherency for that ctlr has been disabled. This means
* that when in a cache coherent system, the driver has to manually manage
* the data cache on the areas that it touches because the dma_* macro are
* basically no-ops.
*
* 3) There is an erratum (on PPC) where you can't use the instruction to do
* a DMA_TO_DEVICE/cache clean so DMA_BIDIRECTIONAL/flushes are used in places
* where a DMA_TO_DEVICE/clean would have [otherwise] sufficed.
*
* 4) AFAICT, hardware flow control isn't supported by the controller --MAG.
*/
#include <linux/platform_device.h>
#include "mpsc.h"
/*
* Define how this driver is known to the outside (we've been assigned a
* range on the "Low-density serial ports" major).
*/
#define MPSC_MAJOR 204
#define MPSC_MINOR_START 44
#define MPSC_DRIVER_NAME "MPSC"
#define MPSC_DEVFS_NAME "ttymm/"
#define MPSC_DEV_NAME "ttyMM"
#define MPSC_VERSION "1.00"
static struct mpsc_port_info mpsc_ports[MPSC_NUM_CTLRS];
static struct mpsc_shared_regs mpsc_shared_regs;
static struct uart_driver mpsc_reg;
static void mpsc_start_rx(struct mpsc_port_info *pi);
static void mpsc_free_ring_mem(struct mpsc_port_info *pi);
static void mpsc_release_port(struct uart_port *port);
/*
******************************************************************************
*
* Baud Rate Generator Routines (BRG)
*
******************************************************************************
*/
static void
mpsc_brg_init(struct mpsc_port_info *pi, u32 clk_src)
{
u32 v;
v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR);
v = (v & ~(0xf << 18)) | ((clk_src & 0xf) << 18);
if (pi->brg_can_tune)
v &= ~(1 << 25);
if (pi->mirror_regs)
pi->BRG_BCR_m = v;
writel(v, pi->brg_base + BRG_BCR);
writel(readl(pi->brg_base + BRG_BTR) & 0xffff0000,
pi->brg_base + BRG_BTR);
return;
}
static void
mpsc_brg_enable(struct mpsc_port_info *pi)
{
u32 v;
v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR);
v |= (1 << 16);
if (pi->mirror_regs)
pi->BRG_BCR_m = v;
writel(v, pi->brg_base + BRG_BCR);
return;
}
static void
mpsc_brg_disable(struct mpsc_port_info *pi)
{
u32 v;
v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR);
v &= ~(1 << 16);
if (pi->mirror_regs)
pi->BRG_BCR_m = v;
writel(v, pi->brg_base + BRG_BCR);
return;
}
static inline void
mpsc_set_baudrate(struct mpsc_port_info *pi, u32 baud)
{
/*
* To set the baud, we adjust the CDV field in the BRG_BCR reg.
* From manual: Baud = clk / ((CDV+1)*2) ==> CDV = (clk / (baud*2)) - 1.
* However, the input clock is divided by 16 in the MPSC b/c of how
* 'MPSC_MMCRH' was set up so we have to divide the 'clk' used in our
* calculation by 16 to account for that. So the real calculation
* that accounts for the way the mpsc is set up is:
* CDV = (clk / (baud*2*16)) - 1 ==> CDV = (clk / (baud << 5)) - 1.
*/
u32 cdv = (pi->port.uartclk / (baud << 5)) - 1;
u32 v;
mpsc_brg_disable(pi);
v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR);
v = (v & 0xffff0000) | (cdv & 0xffff);
if (pi->mirror_regs)
pi->BRG_BCR_m = v;
writel(v, pi->brg_base + BRG_BCR);
mpsc_brg_enable(pi);
return;
}
/*
******************************************************************************
*
* Serial DMA Routines (SDMA)
*
******************************************************************************
*/
static void
mpsc_sdma_burstsize(struct mpsc_port_info *pi, u32 burst_size)
{
u32 v;
pr_debug("mpsc_sdma_burstsize[%d]: burst_size: %d\n",
pi->port.line, burst_size);
burst_size >>= 3; /* Divide by 8 b/c reg values are 8-byte chunks */
if (burst_size < 2)
v = 0x0; /* 1 64-bit word */
else if (burst_size < 4)
v = 0x1; /* 2 64-bit words */
else if (burst_size < 8)
v = 0x2; /* 4 64-bit words */
else
v = 0x3; /* 8 64-bit words */
writel((readl(pi->sdma_base + SDMA_SDC) & (0x3 << 12)) | (v << 12),
pi->sdma_base + SDMA_SDC);
return;
}
static void
mpsc_sdma_init(struct mpsc_port_info *pi, u32 burst_size)
{
pr_debug("mpsc_sdma_init[%d]: burst_size: %d\n", pi->port.line,
burst_size);
writel((readl(pi->sdma_base + SDMA_SDC) & 0x3ff) | 0x03f,
pi->sdma_base + SDMA_SDC);
mpsc_sdma_burstsize(pi, burst_size);
return;
}
static inline u32
mpsc_sdma_intr_mask(struct mpsc_port_info *pi, u32 mask)
{
u32 old, v;
pr_debug("mpsc_sdma_intr_mask[%d]: mask: 0x%x\n", pi->port.line, mask);
old = v = (pi->mirror_regs) ? pi->shared_regs->SDMA_INTR_MASK_m :
readl(pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK);
mask &= 0xf;
if (pi->port.line)
mask <<= 8;
v &= ~mask;
if (pi->mirror_regs)
pi->shared_regs->SDMA_INTR_MASK_m = v;
writel(v, pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK);
if (pi->port.line)
old >>= 8;
return old & 0xf;
}
static inline void
mpsc_sdma_intr_unmask(struct mpsc_port_info *pi, u32 mask)
{
u32 v;
pr_debug("mpsc_sdma_intr_unmask[%d]: mask: 0x%x\n", pi->port.line,mask);
v = (pi->mirror_regs) ? pi->shared_regs->SDMA_INTR_MASK_m :
readl(pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK);
mask &= 0xf;
if (pi->port.line)
mask <<= 8;
v |= mask;
if (pi->mirror_regs)
pi->shared_regs->SDMA_INTR_MASK_m = v;
writel(v, pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK);
return;
}
static inline void
mpsc_sdma_intr_ack(struct mpsc_port_info *pi)
{
pr_debug("mpsc_sdma_intr_ack[%d]: Acknowledging IRQ\n", pi->port.line);
if (pi->mirror_regs)
pi->shared_regs->SDMA_INTR_CAUSE_m = 0;
writel(0, pi->shared_regs->sdma_intr_base + SDMA_INTR_CAUSE);
return;
}
static inline void
mpsc_sdma_set_rx_ring(struct mpsc_port_info *pi, struct mpsc_rx_desc *rxre_p)
{
pr_debug("mpsc_sdma_set_rx_ring[%d]: rxre_p: 0x%x\n",
pi->port.line, (u32) rxre_p);
writel((u32)rxre_p, pi->sdma_base + SDMA_SCRDP);
return;
}
static inline void
mpsc_sdma_set_tx_ring(struct mpsc_port_info *pi, struct mpsc_tx_desc *txre_p)
{
writel((u32)txre_p, pi->sdma_base + SDMA_SFTDP);
writel((u32)txre_p, pi->sdma_base + SDMA_SCTDP);
return;
}
static inline void
mpsc_sdma_cmd(struct mpsc_port_info *pi, u32 val)
{
u32 v;
v = readl(pi->sdma_base + SDMA_SDCM);
if (val)
v |= val;
else
v = 0;
wmb();
writel(v, pi->sdma_base + SDMA_SDCM);
wmb();
return;
}
static inline uint
mpsc_sdma_tx_active(struct mpsc_port_info *pi)
{
return readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_TXD;
}
static inline void
mpsc_sdma_start_tx(struct mpsc_port_info *pi)
{
struct mpsc_tx_desc *txre, *txre_p;
/* If tx isn't running & there's a desc ready to go, start it */
if (!mpsc_sdma_tx_active(pi)) {
txre = (struct mpsc_tx_desc *)(pi->txr +
(pi->txr_tail * MPSC_TXRE_SIZE));
dma_cache_sync((void *) txre, MPSC_TXRE_SIZE, DMA_FROM_DEVICE);
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
invalidate_dcache_range((ulong)txre,
(ulong)txre + MPSC_TXRE_SIZE);
#endif
if (be32_to_cpu(txre->cmdstat) & SDMA_DESC_CMDSTAT_O) {
txre_p = (struct mpsc_tx_desc *)(pi->txr_p +
(pi->txr_tail *
MPSC_TXRE_SIZE));
mpsc_sdma_set_tx_ring(pi, txre_p);
mpsc_sdma_cmd(pi, SDMA_SDCM_STD | SDMA_SDCM_TXD);
}
}
return;
}
static inline void
mpsc_sdma_stop(struct mpsc_port_info *pi)
{
pr_debug("mpsc_sdma_stop[%d]: Stopping SDMA\n", pi->port.line);
/* Abort any SDMA transfers */
mpsc_sdma_cmd(pi, 0);
mpsc_sdma_cmd(pi, SDMA_SDCM_AR | SDMA_SDCM_AT);
/* Clear the SDMA current and first TX and RX pointers */
mpsc_sdma_set_tx_ring(pi, NULL);
mpsc_sdma_set_rx_ring(pi, NULL);
/* Disable interrupts */
mpsc_sdma_intr_mask(pi, 0xf);
mpsc_sdma_intr_ack(pi);
return;
}
/*
******************************************************************************
*
* Multi-Protocol Serial Controller Routines (MPSC)
*
******************************************************************************
*/
static void
mpsc_hw_init(struct mpsc_port_info *pi)
{
u32 v;
pr_debug("mpsc_hw_init[%d]: Initializing hardware\n", pi->port.line);
/* Set up clock routing */
if (pi->mirror_regs) {
v = pi->shared_regs->MPSC_MRR_m;
v &= ~0x1c7;
pi->shared_regs->MPSC_MRR_m = v;
writel(v, pi->shared_regs->mpsc_routing_base + MPSC_MRR);
v = pi->shared_regs->MPSC_RCRR_m;
v = (v & ~0xf0f) | 0x100;
pi->shared_regs->MPSC_RCRR_m = v;
writel(v, pi->shared_regs->mpsc_routing_base + MPSC_RCRR);
v = pi->shared_regs->MPSC_TCRR_m;
v = (v & ~0xf0f) | 0x100;
pi->shared_regs->MPSC_TCRR_m = v;
writel(v, pi->shared_regs->mpsc_routing_base + MPSC_TCRR);
}
else {
v = readl(pi->shared_regs->mpsc_routing_base + MPSC_MRR);
v &= ~0x1c7;
writel(v, pi->shared_regs->mpsc_routing_base + MPSC_MRR);
v = readl(pi->shared_regs->mpsc_routing_base + MPSC_RCRR);
v = (v & ~0xf0f) | 0x100;
writel(v, pi->shared_regs->mpsc_routing_base + MPSC_RCRR);
v = readl(pi->shared_regs->mpsc_routing_base + MPSC_TCRR);
v = (v & ~0xf0f) | 0x100;
writel(v, pi->shared_regs->mpsc_routing_base + MPSC_TCRR);
}
/* Put MPSC in UART mode & enabel Tx/Rx egines */
writel(0x000004c4, pi->mpsc_base + MPSC_MMCRL);
/* No preamble, 16x divider, low-latency, */
writel(0x04400400, pi->mpsc_base + MPSC_MMCRH);
if (pi->mirror_regs) {
pi->MPSC_CHR_1_m = 0;
pi->MPSC_CHR_2_m = 0;
}
writel(0, pi->mpsc_base + MPSC_CHR_1);
writel(0, pi->mpsc_base + MPSC_CHR_2);
writel(pi->mpsc_max_idle, pi->mpsc_base + MPSC_CHR_3);
writel(0, pi->mpsc_base + MPSC_CHR_4);
writel(0, pi->mpsc_base + MPSC_CHR_5);
writel(0, pi->mpsc_base + MPSC_CHR_6);
writel(0, pi->mpsc_base + MPSC_CHR_7);
writel(0, pi->mpsc_base + MPSC_CHR_8);
writel(0, pi->mpsc_base + MPSC_CHR_9);
writel(0, pi->mpsc_base + MPSC_CHR_10);
return;
}
static inline void
mpsc_enter_hunt(struct mpsc_port_info *pi)
{
pr_debug("mpsc_enter_hunt[%d]: Hunting...\n", pi->port.line);
if (pi->mirror_regs) {
writel(pi->MPSC_CHR_2_m | MPSC_CHR_2_EH,
pi->mpsc_base + MPSC_CHR_2);
/* Erratum prevents reading CHR_2 so just delay for a while */
udelay(100);
}
else {
writel(readl(pi->mpsc_base + MPSC_CHR_2) | MPSC_CHR_2_EH,
pi->mpsc_base + MPSC_CHR_2);
while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_EH)
udelay(10);
}
return;
}
static inline void
mpsc_freeze(struct mpsc_port_info *pi)
{
u32 v;
pr_debug("mpsc_freeze[%d]: Freezing\n", pi->port.line);
v = (pi->mirror_regs) ? pi->MPSC_MPCR_m :
readl(pi->mpsc_base + MPSC_MPCR);
v |= MPSC_MPCR_FRZ;
if (pi->mirror_regs)
pi->MPSC_MPCR_m = v;
writel(v, pi->mpsc_base + MPSC_MPCR);
return;
}
static inline void
mpsc_unfreeze(struct mpsc_port_info *pi)
{
u32 v;
v = (pi->mirror_regs) ? pi->MPSC_MPCR_m :
readl(pi->mpsc_base + MPSC_MPCR);
v &= ~MPSC_MPCR_FRZ;
if (pi->mirror_regs)
pi->MPSC_MPCR_m = v;
writel(v, pi->mpsc_base + MPSC_MPCR);
pr_debug("mpsc_unfreeze[%d]: Unfrozen\n", pi->port.line);
return;
}
static inline void
mpsc_set_char_length(struct mpsc_port_info *pi, u32 len)
{
u32 v;
pr_debug("mpsc_set_char_length[%d]: char len: %d\n", pi->port.line,len);
v = (pi->mirror_regs) ? pi->MPSC_MPCR_m :
readl(pi->mpsc_base + MPSC_MPCR);
v = (v & ~(0x3 << 12)) | ((len & 0x3) << 12);
if (pi->mirror_regs)
pi->MPSC_MPCR_m = v;
writel(v, pi->mpsc_base + MPSC_MPCR);
return;
}
static inline void
mpsc_set_stop_bit_length(struct mpsc_port_info *pi, u32 len)
{
u32 v;
pr_debug("mpsc_set_stop_bit_length[%d]: stop bits: %d\n",
pi->port.line, len);
v = (pi->mirror_regs) ? pi->MPSC_MPCR_m :
readl(pi->mpsc_base + MPSC_MPCR);
v = (v & ~(1 << 14)) | ((len & 0x1) << 14);
if (pi->mirror_regs)
pi->MPSC_MPCR_m = v;
writel(v, pi->mpsc_base + MPSC_MPCR);
return;
}
static inline void
mpsc_set_parity(struct mpsc_port_info *pi, u32 p)
{
u32 v;
pr_debug("mpsc_set_parity[%d]: parity bits: 0x%x\n", pi->port.line, p);
v = (pi->mirror_regs) ? pi->MPSC_CHR_2_m :
readl(pi->mpsc_base + MPSC_CHR_2);
p &= 0x3;
v = (v & ~0xc000c) | (p << 18) | (p << 2);
if (pi->mirror_regs)
pi->MPSC_CHR_2_m = v;
writel(v, pi->mpsc_base + MPSC_CHR_2);
return;
}
/*
******************************************************************************
*
* Driver Init Routines
*
******************************************************************************
*/
static void
mpsc_init_hw(struct mpsc_port_info *pi)
{
pr_debug("mpsc_init_hw[%d]: Initializing\n", pi->port.line);
mpsc_brg_init(pi, pi->brg_clk_src);
mpsc_brg_enable(pi);
mpsc_sdma_init(pi, dma_get_cache_alignment()); /* burst a cacheline */
mpsc_sdma_stop(pi);
mpsc_hw_init(pi);
return;
}
static int
mpsc_alloc_ring_mem(struct mpsc_port_info *pi)
{
int rc = 0;
pr_debug("mpsc_alloc_ring_mem[%d]: Allocating ring mem\n",
pi->port.line);
if (!pi->dma_region) {
if (!dma_supported(pi->port.dev, 0xffffffff)) {
printk(KERN_ERR "MPSC: Inadequate DMA support\n");
rc = -ENXIO;
}
else if ((pi->dma_region = dma_alloc_noncoherent(pi->port.dev,
MPSC_DMA_ALLOC_SIZE, &pi->dma_region_p, GFP_KERNEL))
== NULL) {
printk(KERN_ERR "MPSC: Can't alloc Desc region\n");
rc = -ENOMEM;
}
}
return rc;
}
static void
mpsc_free_ring_mem(struct mpsc_port_info *pi)
{
pr_debug("mpsc_free_ring_mem[%d]: Freeing ring mem\n", pi->port.line);
if (pi->dma_region) {
dma_free_noncoherent(pi->port.dev, MPSC_DMA_ALLOC_SIZE,
pi->dma_region, pi->dma_region_p);
pi->dma_region = NULL;
pi->dma_region_p = (dma_addr_t) NULL;
}
return;
}
static void
mpsc_init_rings(struct mpsc_port_info *pi)
{
struct mpsc_rx_desc *rxre;
struct mpsc_tx_desc *txre;
dma_addr_t dp, dp_p;
u8 *bp, *bp_p;
int i;
pr_debug("mpsc_init_rings[%d]: Initializing rings\n", pi->port.line);
BUG_ON(pi->dma_region == NULL);
memset(pi->dma_region, 0, MPSC_DMA_ALLOC_SIZE);
/*
* Descriptors & buffers are multiples of cacheline size and must be
* cacheline aligned.
*/
dp = ALIGN((u32) pi->dma_region, dma_get_cache_alignment());
dp_p = ALIGN((u32) pi->dma_region_p, dma_get_cache_alignment());
/*
* Partition dma region into rx ring descriptor, rx buffers,
* tx ring descriptors, and tx buffers.
*/
pi->rxr = dp;
pi->rxr_p = dp_p;
dp += MPSC_RXR_SIZE;
dp_p += MPSC_RXR_SIZE;
pi->rxb = (u8 *) dp;
pi->rxb_p = (u8 *) dp_p;
dp += MPSC_RXB_SIZE;
dp_p += MPSC_RXB_SIZE;
pi->rxr_posn = 0;
pi->txr = dp;
pi->txr_p = dp_p;
dp += MPSC_TXR_SIZE;
dp_p += MPSC_TXR_SIZE;
pi->txb = (u8 *) dp;
pi->txb_p = (u8 *) dp_p;
pi->txr_head = 0;
pi->txr_tail = 0;
/* Init rx ring descriptors */
dp = pi->rxr;
dp_p = pi->rxr_p;
bp = pi->rxb;
bp_p = pi->rxb_p;
for (i = 0; i < MPSC_RXR_ENTRIES; i++) {
rxre = (struct mpsc_rx_desc *)dp;
rxre->bufsize = cpu_to_be16(MPSC_RXBE_SIZE);
rxre->bytecnt = cpu_to_be16(0);
rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O |
SDMA_DESC_CMDSTAT_EI |
SDMA_DESC_CMDSTAT_F |
SDMA_DESC_CMDSTAT_L);
rxre->link = cpu_to_be32(dp_p + MPSC_RXRE_SIZE);
rxre->buf_ptr = cpu_to_be32(bp_p);
dp += MPSC_RXRE_SIZE;
dp_p += MPSC_RXRE_SIZE;
bp += MPSC_RXBE_SIZE;
bp_p += MPSC_RXBE_SIZE;
}
rxre->link = cpu_to_be32(pi->rxr_p); /* Wrap last back to first */
/* Init tx ring descriptors */
dp = pi->txr;
dp_p = pi->txr_p;
bp = pi->txb;
bp_p = pi->txb_p;
for (i = 0; i < MPSC_TXR_ENTRIES; i++) {
txre = (struct mpsc_tx_desc *)dp;
txre->link = cpu_to_be32(dp_p + MPSC_TXRE_SIZE);
txre->buf_ptr = cpu_to_be32(bp_p);
dp += MPSC_TXRE_SIZE;
dp_p += MPSC_TXRE_SIZE;
bp += MPSC_TXBE_SIZE;
bp_p += MPSC_TXBE_SIZE;
}
txre->link = cpu_to_be32(pi->txr_p); /* Wrap last back to first */
dma_cache_sync((void *) pi->dma_region, MPSC_DMA_ALLOC_SIZE,
DMA_BIDIRECTIONAL);
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
flush_dcache_range((ulong)pi->dma_region,
(ulong)pi->dma_region + MPSC_DMA_ALLOC_SIZE);
#endif
return;
}
static void
mpsc_uninit_rings(struct mpsc_port_info *pi)
{
pr_debug("mpsc_uninit_rings[%d]: Uninitializing rings\n",pi->port.line);
BUG_ON(pi->dma_region == NULL);
pi->rxr = 0;
pi->rxr_p = 0;
pi->rxb = NULL;
pi->rxb_p = NULL;
pi->rxr_posn = 0;
pi->txr = 0;
pi->txr_p = 0;
pi->txb = NULL;
pi->txb_p = NULL;
pi->txr_head = 0;
pi->txr_tail = 0;
return;
}
static int
mpsc_make_ready(struct mpsc_port_info *pi)
{
int rc;
pr_debug("mpsc_make_ready[%d]: Making cltr ready\n", pi->port.line);
if (!pi->ready) {
mpsc_init_hw(pi);
if ((rc = mpsc_alloc_ring_mem(pi)))
return rc;
mpsc_init_rings(pi);
pi->ready = 1;
}
return 0;
}
/*
******************************************************************************
*
* Interrupt Handling Routines
*
******************************************************************************
*/
static inline int
mpsc_rx_intr(struct mpsc_port_info *pi, struct pt_regs *regs)
{
struct mpsc_rx_desc *rxre;
struct tty_struct *tty = pi->port.info->tty;
u32 cmdstat, bytes_in, i;
int rc = 0;
u8 *bp;
char flag = TTY_NORMAL;
pr_debug("mpsc_rx_intr[%d]: Handling Rx intr\n", pi->port.line);
rxre = (struct mpsc_rx_desc *)(pi->rxr + (pi->rxr_posn*MPSC_RXRE_SIZE));
dma_cache_sync((void *)rxre, MPSC_RXRE_SIZE, DMA_FROM_DEVICE);
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
invalidate_dcache_range((ulong)rxre,
(ulong)rxre + MPSC_RXRE_SIZE);
#endif
/*
* Loop through Rx descriptors handling ones that have been completed.
*/
while (!((cmdstat = be32_to_cpu(rxre->cmdstat)) & SDMA_DESC_CMDSTAT_O)){
bytes_in = be16_to_cpu(rxre->bytecnt);
/* Following use of tty struct directly is deprecated */
if (unlikely(tty_buffer_request_room(tty, bytes_in) < bytes_in)) {
if (tty->low_latency)
tty_flip_buffer_push(tty);
/*
* If this failed then we will throw away the bytes
* but must do so to clear interrupts.
*/
}
bp = pi->rxb + (pi->rxr_posn * MPSC_RXBE_SIZE);
dma_cache_sync((void *) bp, MPSC_RXBE_SIZE, DMA_FROM_DEVICE);
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
invalidate_dcache_range((ulong)bp,
(ulong)bp + MPSC_RXBE_SIZE);
#endif
/*
* Other than for parity error, the manual provides little
* info on what data will be in a frame flagged by any of
* these errors. For parity error, it is the last byte in
* the buffer that had the error. As for the rest, I guess
* we'll assume there is no data in the buffer.
* If there is...it gets lost.
*/
if (unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR |
SDMA_DESC_CMDSTAT_FR | SDMA_DESC_CMDSTAT_OR))) {
pi->port.icount.rx++;
if (cmdstat & SDMA_DESC_CMDSTAT_BR) { /* Break */
pi->port.icount.brk++;
if (uart_handle_break(&pi->port))
goto next_frame;
}
else if (cmdstat & SDMA_DESC_CMDSTAT_FR)/* Framing */
pi->port.icount.frame++;
else if (cmdstat & SDMA_DESC_CMDSTAT_OR) /* Overrun */
pi->port.icount.overrun++;
cmdstat &= pi->port.read_status_mask;
if (cmdstat & SDMA_DESC_CMDSTAT_BR)
flag = TTY_BREAK;
else if (cmdstat & SDMA_DESC_CMDSTAT_FR)
flag = TTY_FRAME;
else if (cmdstat & SDMA_DESC_CMDSTAT_OR)
flag = TTY_OVERRUN;
else if (cmdstat & SDMA_DESC_CMDSTAT_PE)
flag = TTY_PARITY;
}
if (uart_handle_sysrq_char(&pi->port, *bp, regs)) {
bp++;
bytes_in--;
goto next_frame;
}
if ((unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR |
SDMA_DESC_CMDSTAT_FR | SDMA_DESC_CMDSTAT_OR))) &&
!(cmdstat & pi->port.ignore_status_mask))
tty_insert_flip_char(tty, *bp, flag);
else {
for (i=0; i<bytes_in; i++)
tty_insert_flip_char(tty, *bp++, TTY_NORMAL);
pi->port.icount.rx += bytes_in;
}
next_frame:
rxre->bytecnt = cpu_to_be16(0);
wmb();
rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O |
SDMA_DESC_CMDSTAT_EI |
SDMA_DESC_CMDSTAT_F |
SDMA_DESC_CMDSTAT_L);
wmb();
dma_cache_sync((void *)rxre, MPSC_RXRE_SIZE, DMA_BIDIRECTIONAL);
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
flush_dcache_range((ulong)rxre,
(ulong)rxre + MPSC_RXRE_SIZE);
#endif
/* Advance to next descriptor */
pi->rxr_posn = (pi->rxr_posn + 1) & (MPSC_RXR_ENTRIES - 1);
rxre = (struct mpsc_rx_desc *)(pi->rxr +
(pi->rxr_posn * MPSC_RXRE_SIZE));
dma_cache_sync((void *)rxre, MPSC_RXRE_SIZE, DMA_FROM_DEVICE);
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
invalidate_dcache_range((ulong)rxre,
(ulong)rxre + MPSC_RXRE_SIZE);
#endif
rc = 1;
}
/* Restart rx engine, if its stopped */
if ((readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_ERD) == 0)
mpsc_start_rx(pi);
tty_flip_buffer_push(tty);
return rc;
}
static inline void
mpsc_setup_tx_desc(struct mpsc_port_info *pi, u32 count, u32 intr)
{
struct mpsc_tx_desc *txre;
txre = (struct mpsc_tx_desc *)(pi->txr +
(pi->txr_head * MPSC_TXRE_SIZE));
txre->bytecnt = cpu_to_be16(count);
txre->shadow = txre->bytecnt;
wmb(); /* ensure cmdstat is last field updated */
txre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O | SDMA_DESC_CMDSTAT_F |
SDMA_DESC_CMDSTAT_L | ((intr) ?
SDMA_DESC_CMDSTAT_EI
: 0));
wmb();
dma_cache_sync((void *) txre, MPSC_TXRE_SIZE, DMA_BIDIRECTIONAL);
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
flush_dcache_range((ulong)txre,
(ulong)txre + MPSC_TXRE_SIZE);
#endif
return;
}
static inline void
mpsc_copy_tx_data(struct mpsc_port_info *pi)
{
struct circ_buf *xmit = &pi->port.info->xmit;
u8 *bp;
u32 i;
/* Make sure the desc ring isn't full */
while (CIRC_CNT(pi->txr_head, pi->txr_tail, MPSC_TXR_ENTRIES) <
(MPSC_TXR_ENTRIES - 1)) {
if (pi->port.x_char) {
/*
* Ideally, we should use the TCS field in
* CHR_1 to put the x_char out immediately but
* errata prevents us from being able to read
* CHR_2 to know that its safe to write to
* CHR_1. Instead, just put it in-band with
* all the other Tx data.
*/
bp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE);
*bp = pi->port.x_char;
pi->port.x_char = 0;
i = 1;
}
else if (!uart_circ_empty(xmit) && !uart_tx_stopped(&pi->port)){
i = min((u32) MPSC_TXBE_SIZE,
(u32) uart_circ_chars_pending(xmit));
i = min(i, (u32) CIRC_CNT_TO_END(xmit->head, xmit->tail,
UART_XMIT_SIZE));
bp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE);
memcpy(bp, &xmit->buf[xmit->tail], i);
xmit->tail = (xmit->tail + i) & (UART_XMIT_SIZE - 1);
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&pi->port);
}
else /* All tx data copied into ring bufs */
return;
dma_cache_sync((void *) bp, MPSC_TXBE_SIZE, DMA_BIDIRECTIONAL);
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
flush_dcache_range((ulong)bp,
(ulong)bp + MPSC_TXBE_SIZE);
#endif
mpsc_setup_tx_desc(pi, i, 1);
/* Advance to next descriptor */
pi->txr_head = (pi->txr_head + 1) & (MPSC_TXR_ENTRIES - 1);
}
return;
}
static inline int
mpsc_tx_intr(struct mpsc_port_info *pi)
{
struct mpsc_tx_desc *txre;
int rc = 0;
if (!mpsc_sdma_tx_active(pi)) {
txre = (struct mpsc_tx_desc *)(pi->txr +
(pi->txr_tail * MPSC_TXRE_SIZE));
dma_cache_sync((void *) txre, MPSC_TXRE_SIZE, DMA_FROM_DEVICE);
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
invalidate_dcache_range((ulong)txre,
(ulong)txre + MPSC_TXRE_SIZE);
#endif
while (!(be32_to_cpu(txre->cmdstat) & SDMA_DESC_CMDSTAT_O)) {
rc = 1;
pi->port.icount.tx += be16_to_cpu(txre->bytecnt);
pi->txr_tail = (pi->txr_tail+1) & (MPSC_TXR_ENTRIES-1);
/* If no more data to tx, fall out of loop */
if (pi->txr_head == pi->txr_tail)
break;
txre = (struct mpsc_tx_desc *)(pi->txr +
(pi->txr_tail * MPSC_TXRE_SIZE));
dma_cache_sync((void *) txre, MPSC_TXRE_SIZE,
DMA_FROM_DEVICE);
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
invalidate_dcache_range((ulong)txre,
(ulong)txre + MPSC_TXRE_SIZE);
#endif
}
mpsc_copy_tx_data(pi);
mpsc_sdma_start_tx(pi); /* start next desc if ready */
}
return rc;
}
/*
* This is the driver's interrupt handler. To avoid a race, we first clear
* the interrupt, then handle any completed Rx/Tx descriptors. When done
* handling those descriptors, we restart the Rx/Tx engines if they're stopped.
*/
static irqreturn_t
mpsc_sdma_intr(int irq, void *dev_id, struct pt_regs *regs)
{
struct mpsc_port_info *pi = dev_id;
ulong iflags;
int rc = IRQ_NONE;
pr_debug("mpsc_sdma_intr[%d]: SDMA Interrupt Received\n",pi->port.line);
spin_lock_irqsave(&pi->port.lock, iflags);
mpsc_sdma_intr_ack(pi);
if (mpsc_rx_intr(pi, regs))
rc = IRQ_HANDLED;
if (mpsc_tx_intr(pi))
rc = IRQ_HANDLED;
spin_unlock_irqrestore(&pi->port.lock, iflags);
pr_debug("mpsc_sdma_intr[%d]: SDMA Interrupt Handled\n", pi->port.line);
return rc;
}
/*
******************************************************************************
*
* serial_core.c Interface routines
*
******************************************************************************
*/
static uint
mpsc_tx_empty(struct uart_port *port)
{
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
ulong iflags;
uint rc;
spin_lock_irqsave(&pi->port.lock, iflags);
rc = mpsc_sdma_tx_active(pi) ? 0 : TIOCSER_TEMT;
spin_unlock_irqrestore(&pi->port.lock, iflags);
return rc;
}
static void
mpsc_set_mctrl(struct uart_port *port, uint mctrl)
{
/* Have no way to set modem control lines AFAICT */
return;
}
static uint
mpsc_get_mctrl(struct uart_port *port)
{
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
u32 mflags, status;
status = (pi->mirror_regs) ? pi->MPSC_CHR_10_m :
readl(pi->mpsc_base + MPSC_CHR_10);
mflags = 0;
if (status & 0x1)
mflags |= TIOCM_CTS;
if (status & 0x2)
mflags |= TIOCM_CAR;
return mflags | TIOCM_DSR; /* No way to tell if DSR asserted */
}
static void
mpsc_stop_tx(struct uart_port *port)
{
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
pr_debug("mpsc_stop_tx[%d]\n", port->line);
mpsc_freeze(pi);
return;
}
static void
mpsc_start_tx(struct uart_port *port)
{
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
mpsc_unfreeze(pi);
mpsc_copy_tx_data(pi);
mpsc_sdma_start_tx(pi);
pr_debug("mpsc_start_tx[%d]\n", port->line);
return;
}
static void
mpsc_start_rx(struct mpsc_port_info *pi)
{
pr_debug("mpsc_start_rx[%d]: Starting...\n", pi->port.line);
/* Issue a Receive Abort to clear any receive errors */
writel(MPSC_CHR_2_RA, pi->mpsc_base + MPSC_CHR_2);
if (pi->rcv_data) {
mpsc_enter_hunt(pi);
mpsc_sdma_cmd(pi, SDMA_SDCM_ERD);
}
return;
}
static void
mpsc_stop_rx(struct uart_port *port)
{
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
pr_debug("mpsc_stop_rx[%d]: Stopping...\n", port->line);
mpsc_sdma_cmd(pi, SDMA_SDCM_AR);
return;
}
static void
mpsc_enable_ms(struct uart_port *port)
{
return; /* Not supported */
}
static void
mpsc_break_ctl(struct uart_port *port, int ctl)
{
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
ulong flags;
u32 v;
v = ctl ? 0x00ff0000 : 0;
spin_lock_irqsave(&pi->port.lock, flags);
if (pi->mirror_regs)
pi->MPSC_CHR_1_m = v;
writel(v, pi->mpsc_base + MPSC_CHR_1);
spin_unlock_irqrestore(&pi->port.lock, flags);
return;
}
static int
mpsc_startup(struct uart_port *port)
{
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
u32 flag = 0;
int rc;
pr_debug("mpsc_startup[%d]: Starting up MPSC, irq: %d\n",
port->line, pi->port.irq);
if ((rc = mpsc_make_ready(pi)) == 0) {
/* Setup IRQ handler */
mpsc_sdma_intr_ack(pi);
/* If irq's are shared, need to set flag */
if (mpsc_ports[0].port.irq == mpsc_ports[1].port.irq)
flag = SA_SHIRQ;
if (request_irq(pi->port.irq, mpsc_sdma_intr, flag,
"mpsc/sdma", pi))
printk(KERN_ERR "MPSC: Can't get SDMA IRQ %d\n",
pi->port.irq);
mpsc_sdma_intr_unmask(pi, 0xf);
mpsc_sdma_set_rx_ring(pi, (struct mpsc_rx_desc *)(pi->rxr_p +
(pi->rxr_posn * MPSC_RXRE_SIZE)));
}
return rc;
}
static void
mpsc_shutdown(struct uart_port *port)
{
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
pr_debug("mpsc_shutdown[%d]: Shutting down MPSC\n", port->line);
mpsc_sdma_stop(pi);
free_irq(pi->port.irq, pi);
return;
}
static void
mpsc_set_termios(struct uart_port *port, struct termios *termios,
struct termios *old)
{
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
u32 baud;
ulong flags;
u32 chr_bits, stop_bits, par;
pi->c_iflag = termios->c_iflag;
pi->c_cflag = termios->c_cflag;
switch (termios->c_cflag & CSIZE) {
case CS5:
chr_bits = MPSC_MPCR_CL_5;
break;
case CS6:
chr_bits = MPSC_MPCR_CL_6;
break;
case CS7:
chr_bits = MPSC_MPCR_CL_7;
break;
case CS8:
default:
chr_bits = MPSC_MPCR_CL_8;
break;
}
if (termios->c_cflag & CSTOPB)
stop_bits = MPSC_MPCR_SBL_2;
else
stop_bits = MPSC_MPCR_SBL_1;
par = MPSC_CHR_2_PAR_EVEN;
if (termios->c_cflag & PARENB)
if (termios->c_cflag & PARODD)
par = MPSC_CHR_2_PAR_ODD;
#ifdef CMSPAR
if (termios->c_cflag & CMSPAR) {
if (termios->c_cflag & PARODD)
par = MPSC_CHR_2_PAR_MARK;
else
par = MPSC_CHR_2_PAR_SPACE;
}
#endif
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk);
spin_lock_irqsave(&pi->port.lock, flags);
uart_update_timeout(port, termios->c_cflag, baud);
mpsc_set_char_length(pi, chr_bits);
mpsc_set_stop_bit_length(pi, stop_bits);
mpsc_set_parity(pi, par);
mpsc_set_baudrate(pi, baud);
/* Characters/events to read */
pi->rcv_data = 1;
pi->port.read_status_mask = SDMA_DESC_CMDSTAT_OR;
if (termios->c_iflag & INPCK)
pi->port.read_status_mask |= SDMA_DESC_CMDSTAT_PE |
SDMA_DESC_CMDSTAT_FR;
if (termios->c_iflag & (BRKINT | PARMRK))
pi->port.read_status_mask |= SDMA_DESC_CMDSTAT_BR;
/* Characters/events to ignore */
pi->port.ignore_status_mask = 0;
if (termios->c_iflag & IGNPAR)
pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_PE |
SDMA_DESC_CMDSTAT_FR;
if (termios->c_iflag & IGNBRK) {
pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_BR;
if (termios->c_iflag & IGNPAR)
pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_OR;
}
/* Ignore all chars if CREAD not set */
if (!(termios->c_cflag & CREAD))
pi->rcv_data = 0;
else
mpsc_start_rx(pi);
spin_unlock_irqrestore(&pi->port.lock, flags);
return;
}
static const char *
mpsc_type(struct uart_port *port)
{
pr_debug("mpsc_type[%d]: port type: %s\n", port->line,MPSC_DRIVER_NAME);
return MPSC_DRIVER_NAME;
}
static int
mpsc_request_port(struct uart_port *port)
{
/* Should make chip/platform specific call */
return 0;
}
static void
mpsc_release_port(struct uart_port *port)
{
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
if (pi->ready) {
mpsc_uninit_rings(pi);
mpsc_free_ring_mem(pi);
pi->ready = 0;
}
return;
}
static void
mpsc_config_port(struct uart_port *port, int flags)
{
return;
}
static int
mpsc_verify_port(struct uart_port *port, struct serial_struct *ser)
{
struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
int rc = 0;
pr_debug("mpsc_verify_port[%d]: Verifying port data\n", pi->port.line);
if (ser->type != PORT_UNKNOWN && ser->type != PORT_MPSC)
rc = -EINVAL;
else if (pi->port.irq != ser->irq)
rc = -EINVAL;
else if (ser->io_type != SERIAL_IO_MEM)
rc = -EINVAL;
else if (pi->port.uartclk / 16 != ser->baud_base) /* Not sure */
rc = -EINVAL;
else if ((void *)pi->port.mapbase != ser->iomem_base)
rc = -EINVAL;
else if (pi->port.iobase != ser->port)
rc = -EINVAL;
else if (ser->hub6 != 0)
rc = -EINVAL;
return rc;
}
static struct uart_ops mpsc_pops = {
.tx_empty = mpsc_tx_empty,
.set_mctrl = mpsc_set_mctrl,
.get_mctrl = mpsc_get_mctrl,
.stop_tx = mpsc_stop_tx,
.start_tx = mpsc_start_tx,
.stop_rx = mpsc_stop_rx,
.enable_ms = mpsc_enable_ms,
.break_ctl = mpsc_break_ctl,
.startup = mpsc_startup,
.shutdown = mpsc_shutdown,
.set_termios = mpsc_set_termios,
.type = mpsc_type,
.release_port = mpsc_release_port,
.request_port = mpsc_request_port,
.config_port = mpsc_config_port,
.verify_port = mpsc_verify_port,
};
/*
******************************************************************************
*
* Console Interface Routines
*
******************************************************************************
*/
#ifdef CONFIG_SERIAL_MPSC_CONSOLE
static void
mpsc_console_write(struct console *co, const char *s, uint count)
{
struct mpsc_port_info *pi = &mpsc_ports[co->index];
u8 *bp, *dp, add_cr = 0;
int i;
while (mpsc_sdma_tx_active(pi))
udelay(100);
while (count > 0) {
bp = dp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE);
for (i = 0; i < MPSC_TXBE_SIZE; i++) {
if (count == 0)
break;
if (add_cr) {
*(dp++) = '\r';
add_cr = 0;
}
else {
*(dp++) = *s;
if (*(s++) == '\n') { /* add '\r' after '\n' */
add_cr = 1;
count++;
}
}
count--;
}
dma_cache_sync((void *) bp, MPSC_TXBE_SIZE, DMA_BIDIRECTIONAL);
#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
flush_dcache_range((ulong)bp,
(ulong)bp + MPSC_TXBE_SIZE);
#endif
mpsc_setup_tx_desc(pi, i, 0);
pi->txr_head = (pi->txr_head + 1) & (MPSC_TXR_ENTRIES - 1);
mpsc_sdma_start_tx(pi);
while (mpsc_sdma_tx_active(pi))
udelay(100);
pi->txr_tail = (pi->txr_tail + 1) & (MPSC_TXR_ENTRIES - 1);
}
return;
}
static int __init
mpsc_console_setup(struct console *co, char *options)
{
struct mpsc_port_info *pi;
int baud, bits, parity, flow;
pr_debug("mpsc_console_setup[%d]: options: %s\n", co->index, options);
if (co->index >= MPSC_NUM_CTLRS)
co->index = 0;
pi = &mpsc_ports[co->index];
baud = pi->default_baud;
bits = pi->default_bits;
parity = pi->default_parity;
flow = pi->default_flow;
if (!pi->port.ops)
return -ENODEV;
spin_lock_init(&pi->port.lock); /* Temporary fix--copied from 8250.c */
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
return uart_set_options(&pi->port, co, baud, parity, bits, flow);
}
static struct console mpsc_console = {
.name = MPSC_DEV_NAME,
.write = mpsc_console_write,
.device = uart_console_device,
.setup = mpsc_console_setup,
.flags = CON_PRINTBUFFER,
.index = -1,
.data = &mpsc_reg,
};
static int __init
mpsc_late_console_init(void)
{
pr_debug("mpsc_late_console_init: Enter\n");
if (!(mpsc_console.flags & CON_ENABLED))
register_console(&mpsc_console);
return 0;
}
late_initcall(mpsc_late_console_init);
#define MPSC_CONSOLE &mpsc_console
#else
#define MPSC_CONSOLE NULL
#endif
/*
******************************************************************************
*
* Dummy Platform Driver to extract & map shared register regions
*
******************************************************************************
*/
static void
mpsc_resource_err(char *s)
{
printk(KERN_WARNING "MPSC: Platform device resource error in %s\n", s);
return;
}
static int
mpsc_shared_map_regs(struct platform_device *pd)
{
struct resource *r;
if ((r = platform_get_resource(pd, IORESOURCE_MEM,
MPSC_ROUTING_BASE_ORDER)) && request_mem_region(r->start,
MPSC_ROUTING_REG_BLOCK_SIZE, "mpsc_routing_regs")) {
mpsc_shared_regs.mpsc_routing_base = ioremap(r->start,
MPSC_ROUTING_REG_BLOCK_SIZE);
mpsc_shared_regs.mpsc_routing_base_p = r->start;
}
else {
mpsc_resource_err("MPSC routing base");
return -ENOMEM;
}
if ((r = platform_get_resource(pd, IORESOURCE_MEM,
MPSC_SDMA_INTR_BASE_ORDER)) && request_mem_region(r->start,
MPSC_SDMA_INTR_REG_BLOCK_SIZE, "sdma_intr_regs")) {
mpsc_shared_regs.sdma_intr_base = ioremap(r->start,
MPSC_SDMA_INTR_REG_BLOCK_SIZE);
mpsc_shared_regs.sdma_intr_base_p = r->start;
}
else {
iounmap(mpsc_shared_regs.mpsc_routing_base);
release_mem_region(mpsc_shared_regs.mpsc_routing_base_p,
MPSC_ROUTING_REG_BLOCK_SIZE);
mpsc_resource_err("SDMA intr base");
return -ENOMEM;
}
return 0;
}
static void
mpsc_shared_unmap_regs(void)
{
if (!mpsc_shared_regs.mpsc_routing_base) {
iounmap(mpsc_shared_regs.mpsc_routing_base);
release_mem_region(mpsc_shared_regs.mpsc_routing_base_p,
MPSC_ROUTING_REG_BLOCK_SIZE);
}
if (!mpsc_shared_regs.sdma_intr_base) {
iounmap(mpsc_shared_regs.sdma_intr_base);
release_mem_region(mpsc_shared_regs.sdma_intr_base_p,
MPSC_SDMA_INTR_REG_BLOCK_SIZE);
}
mpsc_shared_regs.mpsc_routing_base = NULL;
mpsc_shared_regs.sdma_intr_base = NULL;
mpsc_shared_regs.mpsc_routing_base_p = 0;
mpsc_shared_regs.sdma_intr_base_p = 0;
return;
}
static int
mpsc_shared_drv_probe(struct platform_device *dev)
{
struct mpsc_shared_pdata *pdata;
int rc = -ENODEV;
if (dev->id == 0) {
if (!(rc = mpsc_shared_map_regs(dev))) {
pdata = (struct mpsc_shared_pdata *)dev->dev.platform_data;
mpsc_shared_regs.MPSC_MRR_m = pdata->mrr_val;
mpsc_shared_regs.MPSC_RCRR_m= pdata->rcrr_val;
mpsc_shared_regs.MPSC_TCRR_m= pdata->tcrr_val;
mpsc_shared_regs.SDMA_INTR_CAUSE_m =
pdata->intr_cause_val;
mpsc_shared_regs.SDMA_INTR_MASK_m =
pdata->intr_mask_val;
rc = 0;
}
}
return rc;
}
static int
mpsc_shared_drv_remove(struct platform_device *dev)
{
int rc = -ENODEV;
if (dev->id == 0) {
mpsc_shared_unmap_regs();
mpsc_shared_regs.MPSC_MRR_m = 0;
mpsc_shared_regs.MPSC_RCRR_m = 0;
mpsc_shared_regs.MPSC_TCRR_m = 0;
mpsc_shared_regs.SDMA_INTR_CAUSE_m = 0;
mpsc_shared_regs.SDMA_INTR_MASK_m = 0;
rc = 0;
}
return rc;
}
static struct platform_driver mpsc_shared_driver = {
.probe = mpsc_shared_drv_probe,
.remove = mpsc_shared_drv_remove,
.driver = {
.name = MPSC_SHARED_NAME,
},
};
/*
******************************************************************************
*
* Driver Interface Routines
*
******************************************************************************
*/
static struct uart_driver mpsc_reg = {
.owner = THIS_MODULE,
.driver_name = MPSC_DRIVER_NAME,
.devfs_name = MPSC_DEVFS_NAME,
.dev_name = MPSC_DEV_NAME,
.major = MPSC_MAJOR,
.minor = MPSC_MINOR_START,
.nr = MPSC_NUM_CTLRS,
.cons = MPSC_CONSOLE,
};
static int
mpsc_drv_map_regs(struct mpsc_port_info *pi, struct platform_device *pd)
{
struct resource *r;
if ((r = platform_get_resource(pd, IORESOURCE_MEM, MPSC_BASE_ORDER)) &&
request_mem_region(r->start, MPSC_REG_BLOCK_SIZE, "mpsc_regs")){
pi->mpsc_base = ioremap(r->start, MPSC_REG_BLOCK_SIZE);
pi->mpsc_base_p = r->start;
}
else {
mpsc_resource_err("MPSC base");
return -ENOMEM;
}
if ((r = platform_get_resource(pd, IORESOURCE_MEM,
MPSC_SDMA_BASE_ORDER)) && request_mem_region(r->start,
MPSC_SDMA_REG_BLOCK_SIZE, "sdma_regs")) {
pi->sdma_base = ioremap(r->start,MPSC_SDMA_REG_BLOCK_SIZE);
pi->sdma_base_p = r->start;
}
else {
mpsc_resource_err("SDMA base");
return -ENOMEM;
}
if ((r = platform_get_resource(pd,IORESOURCE_MEM,MPSC_BRG_BASE_ORDER))
&& request_mem_region(r->start, MPSC_BRG_REG_BLOCK_SIZE,
"brg_regs")) {
pi->brg_base = ioremap(r->start, MPSC_BRG_REG_BLOCK_SIZE);
pi->brg_base_p = r->start;
}
else {
mpsc_resource_err("BRG base");
return -ENOMEM;
}
return 0;
}
static void
mpsc_drv_unmap_regs(struct mpsc_port_info *pi)
{
if (!pi->mpsc_base) {
iounmap(pi->mpsc_base);
release_mem_region(pi->mpsc_base_p, MPSC_REG_BLOCK_SIZE);
}
if (!pi->sdma_base) {
iounmap(pi->sdma_base);
release_mem_region(pi->sdma_base_p, MPSC_SDMA_REG_BLOCK_SIZE);
}
if (!pi->brg_base) {
iounmap(pi->brg_base);
release_mem_region(pi->brg_base_p, MPSC_BRG_REG_BLOCK_SIZE);
}
pi->mpsc_base = NULL;
pi->sdma_base = NULL;
pi->brg_base = NULL;
pi->mpsc_base_p = 0;
pi->sdma_base_p = 0;
pi->brg_base_p = 0;
return;
}
static void
mpsc_drv_get_platform_data(struct mpsc_port_info *pi,
struct platform_device *pd, int num)
{
struct mpsc_pdata *pdata;
pdata = (struct mpsc_pdata *)pd->dev.platform_data;
pi->port.uartclk = pdata->brg_clk_freq;
pi->port.iotype = UPIO_MEM;
pi->port.line = num;
pi->port.type = PORT_MPSC;
pi->port.fifosize = MPSC_TXBE_SIZE;
pi->port.membase = pi->mpsc_base;
pi->port.mapbase = (ulong)pi->mpsc_base;
pi->port.ops = &mpsc_pops;
pi->mirror_regs = pdata->mirror_regs;
pi->cache_mgmt = pdata->cache_mgmt;
pi->brg_can_tune = pdata->brg_can_tune;
pi->brg_clk_src = pdata->brg_clk_src;
pi->mpsc_max_idle = pdata->max_idle;
pi->default_baud = pdata->default_baud;
pi->default_bits = pdata->default_bits;
pi->default_parity = pdata->default_parity;
pi->default_flow = pdata->default_flow;
/* Initial values of mirrored regs */
pi->MPSC_CHR_1_m = pdata->chr_1_val;
pi->MPSC_CHR_2_m = pdata->chr_2_val;
pi->MPSC_CHR_10_m = pdata->chr_10_val;
pi->MPSC_MPCR_m = pdata->mpcr_val;
pi->BRG_BCR_m = pdata->bcr_val;
pi->shared_regs = &mpsc_shared_regs;
pi->port.irq = platform_get_irq(pd, 0);
return;
}
static int
mpsc_drv_probe(struct platform_device *dev)
{
struct mpsc_port_info *pi;
int rc = -ENODEV;
pr_debug("mpsc_drv_probe: Adding MPSC %d\n", dev->id);
if (dev->id < MPSC_NUM_CTLRS) {
pi = &mpsc_ports[dev->id];
if (!(rc = mpsc_drv_map_regs(pi, dev))) {
mpsc_drv_get_platform_data(pi, dev, dev->id);
if (!(rc = mpsc_make_ready(pi)))
if (!(rc = uart_add_one_port(&mpsc_reg,
&pi->port)))
rc = 0;
else {
mpsc_release_port(
(struct uart_port *)pi);
mpsc_drv_unmap_regs(pi);
}
else
mpsc_drv_unmap_regs(pi);
}
}
return rc;
}
static int
mpsc_drv_remove(struct platform_device *dev)
{
pr_debug("mpsc_drv_exit: Removing MPSC %d\n", dev->id);
if (dev->id < MPSC_NUM_CTLRS) {
uart_remove_one_port(&mpsc_reg, &mpsc_ports[dev->id].port);
mpsc_release_port((struct uart_port *)&mpsc_ports[dev->id].port);
mpsc_drv_unmap_regs(&mpsc_ports[dev->id]);
return 0;
}
else
return -ENODEV;
}
static struct platform_driver mpsc_driver = {
.probe = mpsc_drv_probe,
.remove = mpsc_drv_remove,
.driver = {
.name = MPSC_CTLR_NAME,
},
};
static int __init
mpsc_drv_init(void)
{
int rc;
printk(KERN_INFO "Serial: MPSC driver $Revision: 1.00 $\n");
memset(mpsc_ports, 0, sizeof(mpsc_ports));
memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs));
if (!(rc = uart_register_driver(&mpsc_reg))) {
if (!(rc = platform_driver_register(&mpsc_shared_driver))) {
if ((rc = platform_driver_register(&mpsc_driver))) {
platform_driver_unregister(&mpsc_shared_driver);
uart_unregister_driver(&mpsc_reg);
}
}
else
uart_unregister_driver(&mpsc_reg);
}
return rc;
}
static void __exit
mpsc_drv_exit(void)
{
platform_driver_unregister(&mpsc_driver);
platform_driver_unregister(&mpsc_shared_driver);
uart_unregister_driver(&mpsc_reg);
memset(mpsc_ports, 0, sizeof(mpsc_ports));
memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs));
return;
}
module_init(mpsc_drv_init);
module_exit(mpsc_drv_exit);
MODULE_AUTHOR("Mark A. Greer <mgreer@mvista.com>");
MODULE_DESCRIPTION("Generic Marvell MPSC serial/UART driver $Revision: 1.00 $");
MODULE_VERSION(MPSC_VERSION);
MODULE_LICENSE("GPL");
MODULE_ALIAS_CHARDEV_MAJOR(MPSC_MAJOR);
View Git Blame Copy Permalink