kevin/linux
1
Fork 0
Code
5a80415bca
linux/drivers/media/video/em28xx/em28xx.h
Sascha Sommer 5a80415bca V4L/DVB (6538): em28xx: fix locking to allow accesses from 2 different threads at the same time 
The attached patch modifies the em28xx driver so that there can be ioctls from
multiple different threads.

This is necessary for capture apps like MPlayer that use different threads for
capturing and channel tuning.

Now the locking is only done for the ioctls that change properties of the
device or access the i2c bus.

It also removes some locks that look unnecessary:

In em28xx_init_dev:
  the videodevice is not registered yet so nothing can access the hardware
 meanwhile, the device struct is not assigned to the interface yet so no race
 with disconnect is possible

In em28xx_release_resources:
  it gets only called when dev->lock is already held

Signed-off-by: Sascha Sommer <saschasommer@freenet.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:01:55 -02:00

518 lines
14 KiB
C
Raw Blame History

/*
em28xx.h - driver for Empia EM2800/EM2820/2840 USB video capture devices
Copyright (C) 2005 Markus Rechberger <mrechberger@gmail.com>
Ludovico Cavedon <cavedon@sssup.it>
Mauro Carvalho Chehab <mchehab@infradead.org>
Based on the em2800 driver from Sascha Sommer <saschasommer@freenet.de>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef _EM28XX_H
#define _EM28XX_H
#include <linux/videodev.h>
#include <linux/i2c.h>
#include <linux/mutex.h>
#include <media/ir-kbd-i2c.h>
/* Boards supported by driver */
#define EM2800_BOARD_UNKNOWN 0
#define EM2820_BOARD_UNKNOWN 1
#define EM2820_BOARD_TERRATEC_CINERGY_250 2
#define EM2820_BOARD_PINNACLE_USB_2 3
#define EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 4
#define EM2820_BOARD_MSI_VOX_USB_2 5
#define EM2800_BOARD_TERRATEC_CINERGY_200 6
#define EM2800_BOARD_LEADTEK_WINFAST_USBII 7
#define EM2800_BOARD_KWORLD_USB2800 8
#define EM2820_BOARD_PINNACLE_DVC_90 9
#define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 10
#define EM2880_BOARD_TERRATEC_HYBRID_XS 11
#define EM2820_BOARD_KWORLD_PVRTV2800RF 12
#define EM2880_BOARD_TERRATEC_PRODIGY_XS 13
#define EM2820_BOARD_PROLINK_PLAYTV_USB2 14
#define UNSET -1
/* maximum number of em28xx boards */
#define EM28XX_MAXBOARDS 1 /*FIXME: should be bigger */
/* maximum number of frames that can be queued */
#define EM28XX_NUM_FRAMES 5
/* number of frames that get used for v4l2_read() */
#define EM28XX_NUM_READ_FRAMES 2
/* number of buffers for isoc transfers */
#define EM28XX_NUM_BUFS 5
/* number of packets for each buffer
windows requests only 40 packets .. so we better do the same
this is what I found out for all alternate numbers there!
*/
#define EM28XX_NUM_PACKETS 40
/* default alternate; 0 means choose the best */
#define EM28XX_PINOUT 0
#define EM28XX_INTERLACED_DEFAULT 1
/*
#define (use usbview if you want to get the other alternate number infos)
#define
#define alternate number 2
#define Endpoint Address: 82
Direction: in
Attribute: 1
Type: Isoc
Max Packet Size: 1448
Interval: 125us
alternate number 7
Endpoint Address: 82
Direction: in
Attribute: 1
Type: Isoc
Max Packet Size: 3072
Interval: 125us
*/
/* time to wait when stopping the isoc transfer */
#define EM28XX_URB_TIMEOUT msecs_to_jiffies(EM28XX_NUM_BUFS * EM28XX_NUM_PACKETS)
/* time in msecs to wait for i2c writes to finish */
#define EM2800_I2C_WRITE_TIMEOUT 20
/* the various frame states */
enum em28xx_frame_state {
F_UNUSED = 0,
F_QUEUED,
F_GRABBING,
F_DONE,
F_ERROR,
};
/* stream states */
enum em28xx_stream_state {
STREAM_OFF,
STREAM_INTERRUPT,
STREAM_ON,
};
/* frames */
struct em28xx_frame_t {
void *bufmem;
struct v4l2_buffer buf;
enum em28xx_frame_state state;
struct list_head frame;
unsigned long vma_use_count;
int top_field;
int fieldbytesused;
};
/* io methods */
enum em28xx_io_method {
IO_NONE,
IO_READ,
IO_MMAP,
};
/* inputs */
#define MAX_EM28XX_INPUT 4
enum enum28xx_itype {
EM28XX_VMUX_COMPOSITE1 = 1,
EM28XX_VMUX_COMPOSITE2,
EM28XX_VMUX_COMPOSITE3,
EM28XX_VMUX_COMPOSITE4,
EM28XX_VMUX_SVIDEO,
EM28XX_VMUX_TELEVISION,
EM28XX_VMUX_CABLE,
EM28XX_VMUX_DVB,
EM28XX_VMUX_DEBUG,
EM28XX_RADIO,
};
struct em28xx_input {
enum enum28xx_itype type;
unsigned int vmux;
unsigned int amux;
};
#define INPUT(nr) (&em28xx_boards[dev->model].input[nr])
enum em28xx_decoder {
EM28XX_TVP5150,
EM28XX_SAA7113,
EM28XX_SAA7114
};
struct em28xx_board {
char *name;
int vchannels;
int norm;
int tuner_type;
/* i2c flags */
unsigned int is_em2800;
unsigned int tda9887_conf;
unsigned int has_tuner:1;
unsigned int has_msp34xx:1;
enum em28xx_decoder decoder;
struct em28xx_input input[MAX_EM28XX_INPUT];
};
struct em28xx_eeprom {
u32 id; /* 0x9567eb1a */
u16 vendor_ID;
u16 product_ID;
u16 chip_conf;
u16 board_conf;
u16 string1, string2, string3;
u8 string_idx_table;
};
/* device states */
enum em28xx_dev_state {
DEV_INITIALIZED = 0x01,
DEV_DISCONNECTED = 0x02,
DEV_MISCONFIGURED = 0x04,
};
/* tvnorms */
struct em28xx_tvnorm {
char *name;
v4l2_std_id id;
/* mode for saa7113h */
int mode;
};
/* main device struct */
struct em28xx {
/* generic device properties */
char name[30]; /* name (including minor) of the device */
int model; /* index in the device_data struct */
int devno; /* marks the number of this device */
unsigned int is_em2800;
int video_inputs; /* number of video inputs */
struct list_head devlist;
unsigned int has_tuner:1;
unsigned int has_msp34xx:1;
unsigned int has_tda9887:1;
u32 i2s_speed; /* I2S speed for audio digital stream */
enum em28xx_decoder decoder;
int tuner_type; /* type of the tuner */
int tuner_addr; /* tuner address */
int tda9887_conf;
/* i2c i/o */
struct i2c_adapter i2c_adap;
struct i2c_client i2c_client;
/* video for linux */
int users; /* user count for exclusive use */
struct video_device *vdev; /* video for linux device struct */
struct video_picture vpic; /* picture settings only used to init saa7113h */
struct em28xx_tvnorm *tvnorm; /* selected tv norm */
int ctl_freq; /* selected frequency */
unsigned int ctl_input; /* selected input */
unsigned int ctl_ainput; /* slected audio input */
int mute;
int volume;
/* frame properties */
struct em28xx_frame_t frame[EM28XX_NUM_FRAMES]; /* list of frames */
int num_frames; /* number of frames currently in use */
unsigned int frame_count; /* total number of transfered frames */
struct em28xx_frame_t *frame_current; /* the frame that is being filled */
int width; /* current frame width */
int height; /* current frame height */
int frame_size; /* current frame size */
int field_size; /* current field size */
int bytesperline;
int hscale; /* horizontal scale factor (see datasheet) */
int vscale; /* vertical scale factor (see datasheet) */
int interlaced; /* 1=interlace fileds, 0=just top fileds */
int type;
unsigned long hash; /* eeprom hash - for boards with generic ID */
/* states */
enum em28xx_dev_state state;
enum em28xx_stream_state stream;
enum em28xx_io_method io;
/* locks */
struct mutex lock;
spinlock_t queue_lock;
struct list_head inqueue, outqueue;
wait_queue_head_t open, wait_frame, wait_stream;
struct video_device *vbi_dev;
unsigned char eedata[256];
/* usb transfer */
struct usb_device *udev; /* the usb device */
int alt; /* alternate */
int max_pkt_size; /* max packet size of isoc transaction */
int num_alt; /* Number of alternative settings */
unsigned int *alt_max_pkt_size; /* array of wMaxPacketSize */
struct urb *urb[EM28XX_NUM_BUFS]; /* urb for isoc transfers */
char *transfer_buffer[EM28XX_NUM_BUFS]; /* transfer buffers for isoc transfer */
/* helper funcs that call usb_control_msg */
int (*em28xx_write_regs) (struct em28xx * dev, u16 reg, char *buf,
int len);
int (*em28xx_read_reg) (struct em28xx * dev, u16 reg);
int (*em28xx_read_reg_req_len) (struct em28xx * dev, u8 req, u16 reg,
char *buf, int len);
int (*em28xx_write_regs_req) (struct em28xx * dev, u8 req, u16 reg,
char *buf, int len);
int (*em28xx_read_reg_req) (struct em28xx * dev, u8 req, u16 reg);
};
/* Provided by em28xx-i2c.c */
void em28xx_i2c_call_clients(struct em28xx *dev, unsigned int cmd, void *arg);
int em28xx_i2c_register(struct em28xx *dev);
int em28xx_i2c_unregister(struct em28xx *dev);
/* Provided by em28xx-input.c */
void em28xx_set_ir(struct em28xx * dev,struct IR_i2c *ir);
/* Provided by em28xx-core.c */
u32 em28xx_request_buffers(struct em28xx *dev, u32 count);
void em28xx_queue_unusedframes(struct em28xx *dev);
void em28xx_release_buffers(struct em28xx *dev);
int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg,
char *buf, int len);
int em28xx_read_reg_req(struct em28xx *dev, u8 req, u16 reg);
int em28xx_read_reg(struct em28xx *dev, u16 reg);
int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
int len);
int em28xx_write_regs(struct em28xx *dev, u16 reg, char *buf, int len);
int em28xx_write_reg_bits(struct em28xx *dev, u16 reg, u8 val,
u8 bitmask);
int em28xx_write_ac97(struct em28xx *dev, u8 reg, u8 * val);
int em28xx_audio_analog_set(struct em28xx *dev);
int em28xx_colorlevels_set_default(struct em28xx *dev);
int em28xx_capture_start(struct em28xx *dev, int start);
int em28xx_outfmt_set_yuv422(struct em28xx *dev);
int em28xx_resolution_set(struct em28xx *dev);
int em28xx_init_isoc(struct em28xx *dev);
void em28xx_uninit_isoc(struct em28xx *dev);
int em28xx_set_alternate(struct em28xx *dev);
/* Provided by em28xx-cards.c */
extern int em2800_variant_detect(struct usb_device* udev,int model);
extern void em28xx_pre_card_setup(struct em28xx *dev);
extern void em28xx_card_setup(struct em28xx *dev);
extern struct em28xx_board em28xx_boards[];
extern struct usb_device_id em28xx_id_table[];
extern const unsigned int em28xx_bcount;
/* em28xx registers */
#define CHIPID_REG 0x0a
#define USBSUSP_REG 0x0c /* */
#define AUDIOSRC_REG 0x0e
#define XCLK_REG 0x0f
#define VINMODE_REG 0x10
#define VINCTRL_REG 0x11
#define VINENABLE_REG 0x12 /* */
#define GAMMA_REG 0x14
#define RGAIN_REG 0x15
#define GGAIN_REG 0x16
#define BGAIN_REG 0x17
#define ROFFSET_REG 0x18
#define GOFFSET_REG 0x19
#define BOFFSET_REG 0x1a
#define OFLOW_REG 0x1b
#define HSTART_REG 0x1c
#define VSTART_REG 0x1d
#define CWIDTH_REG 0x1e
#define CHEIGHT_REG 0x1f
#define YGAIN_REG 0x20
#define YOFFSET_REG 0x21
#define UVGAIN_REG 0x22
#define UOFFSET_REG 0x23
#define VOFFSET_REG 0x24
#define SHARPNESS_REG 0x25
#define COMPR_REG 0x26
#define OUTFMT_REG 0x27
#define XMIN_REG 0x28
#define XMAX_REG 0x29
#define YMIN_REG 0x2a
#define YMAX_REG 0x2b
#define HSCALELOW_REG 0x30
#define HSCALEHIGH_REG 0x31
#define VSCALELOW_REG 0x32
#define VSCALEHIGH_REG 0x33
#define AC97LSB_REG 0x40
#define AC97MSB_REG 0x41
#define AC97ADDR_REG 0x42
#define AC97BUSY_REG 0x43
/* em202 registers */
#define MASTER_AC97 0x02
#define VIDEO_AC97 0x14
/* register settings */
#define EM28XX_AUDIO_SRC_TUNER 0xc0
#define EM28XX_AUDIO_SRC_LINE 0x80
/* printk macros */
#define em28xx_err(fmt, arg...) do {\
printk(KERN_ERR fmt , ##arg); } while (0)
#define em28xx_errdev(fmt, arg...) do {\
printk(KERN_ERR "%s: "fmt,\
dev->name , ##arg); } while (0)
#define em28xx_info(fmt, arg...) do {\
printk(KERN_INFO "%s: "fmt,\
dev->name , ##arg); } while (0)
#define em28xx_warn(fmt, arg...) do {\
printk(KERN_WARNING "%s: "fmt,\
dev->name , ##arg); } while (0)
inline static int em28xx_audio_source(struct em28xx *dev, int input)
{
return em28xx_write_reg_bits(dev, AUDIOSRC_REG, input, 0xc0);
}
inline static int em28xx_audio_usb_mute(struct em28xx *dev, int mute)
{
return em28xx_write_reg_bits(dev, XCLK_REG, mute ? 0x00 : 0x80, 0x80);
}
inline static int em28xx_audio_analog_setup(struct em28xx *dev)
{
/* unmute video mixer with default volume level */
return em28xx_write_ac97(dev, VIDEO_AC97, "\x08\x08");
}
inline static int em28xx_compression_disable(struct em28xx *dev)
{
/* side effect of disabling scaler and mixer */
return em28xx_write_regs(dev, COMPR_REG, "\x00", 1);
}
inline static int em28xx_contrast_get(struct em28xx *dev)
{
return em28xx_read_reg(dev, YGAIN_REG) & 0x1f;
}
inline static int em28xx_brightness_get(struct em28xx *dev)
{
return em28xx_read_reg(dev, YOFFSET_REG);
}
inline static int em28xx_saturation_get(struct em28xx *dev)
{
return em28xx_read_reg(dev, UVGAIN_REG) & 0x1f;
}
inline static int em28xx_u_balance_get(struct em28xx *dev)
{
return em28xx_read_reg(dev, UOFFSET_REG);
}
inline static int em28xx_v_balance_get(struct em28xx *dev)
{
return em28xx_read_reg(dev, VOFFSET_REG);
}
inline static int em28xx_gamma_get(struct em28xx *dev)
{
return em28xx_read_reg(dev, GAMMA_REG) & 0x3f;
}
inline static int em28xx_contrast_set(struct em28xx *dev, s32 val)
{
u8 tmp = (u8) val;
return em28xx_write_regs(dev, YGAIN_REG, &tmp, 1);
}
inline static int em28xx_brightness_set(struct em28xx *dev, s32 val)
{
u8 tmp = (u8) val;
return em28xx_write_regs(dev, YOFFSET_REG, &tmp, 1);
}
inline static int em28xx_saturation_set(struct em28xx *dev, s32 val)
{
u8 tmp = (u8) val;
return em28xx_write_regs(dev, UVGAIN_REG, &tmp, 1);
}
inline static int em28xx_u_balance_set(struct em28xx *dev, s32 val)
{
u8 tmp = (u8) val;
return em28xx_write_regs(dev, UOFFSET_REG, &tmp, 1);
}
inline static int em28xx_v_balance_set(struct em28xx *dev, s32 val)
{
u8 tmp = (u8) val;
return em28xx_write_regs(dev, VOFFSET_REG, &tmp, 1);
}
inline static int em28xx_gamma_set(struct em28xx *dev, s32 val)
{
u8 tmp = (u8) val;
return em28xx_write_regs(dev, GAMMA_REG, &tmp, 1);
}
/*FIXME: maxw should be dependent of alt mode */
inline static unsigned int norm_maxw(struct em28xx *dev)
{
switch(dev->model){
case (EM2820_BOARD_MSI_VOX_USB_2): return(640);
default: return(720);
}
}
inline static unsigned int norm_maxh(struct em28xx *dev)
{
switch(dev->model){
case (EM2820_BOARD_MSI_VOX_USB_2): return(480);
default: return (dev->tvnorm->id & V4L2_STD_625_50) ? 576 : 480;
}
}
#endif
View Git Blame Copy Permalink