1
linux/drivers/acpi/glue.c
Bjorn Helgaas 0e46517d96 ACPI: call init_acpi_device_notify() explicitly rather than as initcall
This patch makes acpi_init() call init_acpi_device_notify() directly.
Previously, init_acpi_device_notify() was an arch_initcall (sequence 3),
so it was called before acpi_init() (a subsys_initcall at sequence 4).

init_acpi_device_notify() sets the platform_notify and
platform_notify_remove function pointers.  These pointers
are not used until acpi_init() enumerates ACPI devices in
this path:

    acpi_init()
	    acpi_scan_init()
		acpi_bus_scan()
		    acpi_add_single_object()
			acpi_device_register()
			    device_add()
				<use platform_notify>

So it is sufficient to have acpi_init() call init_acpi_device_notify()
directly before it enumerates devices.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 12:51:16 -04:00

299 lines
7.2 KiB
C

/*
* Link physical devices with ACPI devices support
*
* Copyright (c) 2005 David Shaohua Li <shaohua.li@intel.com>
* Copyright (c) 2005 Intel Corp.
*
* This file is released under the GPLv2.
*/
#include <linux/init.h>
#include <linux/list.h>
#include <linux/device.h>
#include <linux/rwsem.h>
#include <linux/acpi.h>
#define ACPI_GLUE_DEBUG 0
#if ACPI_GLUE_DEBUG
#define DBG(x...) printk(PREFIX x)
#else
#define DBG(x...) do { } while(0)
#endif
static LIST_HEAD(bus_type_list);
static DECLARE_RWSEM(bus_type_sem);
int register_acpi_bus_type(struct acpi_bus_type *type)
{
if (acpi_disabled)
return -ENODEV;
if (type && type->bus && type->find_device) {
down_write(&bus_type_sem);
list_add_tail(&type->list, &bus_type_list);
up_write(&bus_type_sem);
printk(KERN_INFO PREFIX "bus type %s registered\n",
type->bus->name);
return 0;
}
return -ENODEV;
}
int unregister_acpi_bus_type(struct acpi_bus_type *type)
{
if (acpi_disabled)
return 0;
if (type) {
down_write(&bus_type_sem);
list_del_init(&type->list);
up_write(&bus_type_sem);
printk(KERN_INFO PREFIX "ACPI bus type %s unregistered\n",
type->bus->name);
return 0;
}
return -ENODEV;
}
static struct acpi_bus_type *acpi_get_bus_type(struct bus_type *type)
{
struct acpi_bus_type *tmp, *ret = NULL;
down_read(&bus_type_sem);
list_for_each_entry(tmp, &bus_type_list, list) {
if (tmp->bus == type) {
ret = tmp;
break;
}
}
up_read(&bus_type_sem);
return ret;
}
static int acpi_find_bridge_device(struct device *dev, acpi_handle * handle)
{
struct acpi_bus_type *tmp;
int ret = -ENODEV;
down_read(&bus_type_sem);
list_for_each_entry(tmp, &bus_type_list, list) {
if (tmp->find_bridge && !tmp->find_bridge(dev, handle)) {
ret = 0;
break;
}
}
up_read(&bus_type_sem);
return ret;
}
/* Get device's handler per its address under its parent */
struct acpi_find_child {
acpi_handle handle;
acpi_integer address;
};
static acpi_status
do_acpi_find_child(acpi_handle handle, u32 lvl, void *context, void **rv)
{
acpi_status status;
struct acpi_device_info *info;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
struct acpi_find_child *find = context;
status = acpi_get_object_info(handle, &buffer);
if (ACPI_SUCCESS(status)) {
info = buffer.pointer;
if (info->address == find->address)
find->handle = handle;
kfree(buffer.pointer);
}
return AE_OK;
}
acpi_handle acpi_get_child(acpi_handle parent, acpi_integer address)
{
struct acpi_find_child find = { NULL, address };
if (!parent)
return NULL;
acpi_walk_namespace(ACPI_TYPE_DEVICE, parent,
1, do_acpi_find_child, &find, NULL);
return find.handle;
}
EXPORT_SYMBOL(acpi_get_child);
/* Link ACPI devices with physical devices */
static void acpi_glue_data_handler(acpi_handle handle,
u32 function, void *context)
{
/* we provide an empty handler */
}
/* Note: a success call will increase reference count by one */
struct device *acpi_get_physical_device(acpi_handle handle)
{
acpi_status status;
struct device *dev;
status = acpi_get_data(handle, acpi_glue_data_handler, (void **)&dev);
if (ACPI_SUCCESS(status))
return get_device(dev);
return NULL;
}
EXPORT_SYMBOL(acpi_get_physical_device);
/* ToDo: When a PCI bridge is found, return the PCI device behind the bridge
* This should work in general, but did not on a Lenovo T61 for the
* graphics card. But this must be fixed when the PCI device is
* bound and the kernel device struct is attached to the acpi device
* Note: A success call will increase reference count by one
* Do call put_device(dev) on the returned device then
*/
struct device *acpi_get_physical_pci_device(acpi_handle handle)
{
struct device *dev;
long long device_id;
acpi_status status;
status =
acpi_evaluate_integer(handle, "_ADR", NULL, &device_id);
if (ACPI_FAILURE(status))
return NULL;
/* We need to attempt to determine whether the _ADR refers to a
PCI device or not. There's no terribly good way to do this,
so the best we can hope for is to assume that there'll never
be a device in the host bridge */
if (device_id >= 0x10000) {
/* It looks like a PCI device. Does it exist? */
dev = acpi_get_physical_device(handle);
} else {
/* It doesn't look like a PCI device. Does its parent
exist? */
acpi_handle phandle;
if (acpi_get_parent(handle, &phandle))
return NULL;
dev = acpi_get_physical_device(phandle);
}
if (!dev)
return NULL;
return dev;
}
EXPORT_SYMBOL(acpi_get_physical_pci_device);
static int acpi_bind_one(struct device *dev, acpi_handle handle)
{
struct acpi_device *acpi_dev;
acpi_status status;
if (dev->archdata.acpi_handle) {
dev_warn(dev, "Drivers changed 'acpi_handle'\n");
return -EINVAL;
}
get_device(dev);
status = acpi_attach_data(handle, acpi_glue_data_handler, dev);
if (ACPI_FAILURE(status)) {
put_device(dev);
return -EINVAL;
}
dev->archdata.acpi_handle = handle;
status = acpi_bus_get_device(handle, &acpi_dev);
if (!ACPI_FAILURE(status)) {
int ret;
ret = sysfs_create_link(&dev->kobj, &acpi_dev->dev.kobj,
"firmware_node");
ret = sysfs_create_link(&acpi_dev->dev.kobj, &dev->kobj,
"physical_node");
if (acpi_dev->wakeup.flags.valid) {
device_set_wakeup_capable(dev, true);
device_set_wakeup_enable(dev,
acpi_dev->wakeup.state.enabled);
}
}
return 0;
}
static int acpi_unbind_one(struct device *dev)
{
if (!dev->archdata.acpi_handle)
return 0;
if (dev == acpi_get_physical_device(dev->archdata.acpi_handle)) {
struct acpi_device *acpi_dev;
/* acpi_get_physical_device increase refcnt by one */
put_device(dev);
if (!acpi_bus_get_device(dev->archdata.acpi_handle,
&acpi_dev)) {
sysfs_remove_link(&dev->kobj, "firmware_node");
sysfs_remove_link(&acpi_dev->dev.kobj, "physical_node");
}
acpi_detach_data(dev->archdata.acpi_handle,
acpi_glue_data_handler);
dev->archdata.acpi_handle = NULL;
/* acpi_bind_one increase refcnt by one */
put_device(dev);
} else {
dev_err(dev, "Oops, 'acpi_handle' corrupt\n");
}
return 0;
}
static int acpi_platform_notify(struct device *dev)
{
struct acpi_bus_type *type;
acpi_handle handle;
int ret = -EINVAL;
if (!dev->bus || !dev->parent) {
/* bridge devices genernally haven't bus or parent */
ret = acpi_find_bridge_device(dev, &handle);
goto end;
}
type = acpi_get_bus_type(dev->bus);
if (!type) {
DBG("No ACPI bus support for %s\n", dev_name(dev));
ret = -EINVAL;
goto end;
}
if ((ret = type->find_device(dev, &handle)) != 0)
DBG("Can't get handler for %s\n", dev_name(dev));
end:
if (!ret)
acpi_bind_one(dev, handle);
#if ACPI_GLUE_DEBUG
if (!ret) {
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
acpi_get_name(dev->archdata.acpi_handle,
ACPI_FULL_PATHNAME, &buffer);
DBG("Device %s -> %s\n", dev_name(dev), (char *)buffer.pointer);
kfree(buffer.pointer);
} else
DBG("Device %s -> No ACPI support\n", dev_name(dev));
#endif
return ret;
}
static int acpi_platform_notify_remove(struct device *dev)
{
acpi_unbind_one(dev);
return 0;
}
int __init init_acpi_device_notify(void)
{
if (platform_notify || platform_notify_remove) {
printk(KERN_ERR PREFIX "Can't use platform_notify\n");
return 0;
}
platform_notify = acpi_platform_notify;
platform_notify_remove = acpi_platform_notify_remove;
return 0;
}