e10c52e7e0
In order to connect the USB 2.0 PHY to its controller, we also need to
set "u0_pdrstn_split_sw_usbpipe_plugen" [1]. Some downstream U-Boot
versions did that, but upstream firmware does not, and the kernel must
not rely on such behavior anyway. Failing to set this left the USB
gadget port invisible to connected hosts behind.
Link: https://doc-en.rvspace.org/JH7110/TRM/JH7110_TRM/sys_syscon.html#sys_syscon__section_b3l_fqs_wsb [1]
Fixes: 16d3a71c20
("phy: starfive: Add JH7110 USB 2.0 PHY driver")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20241015070444.20972-2-minda.chen@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
169 lines
4.1 KiB
C
169 lines
4.1 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* StarFive JH7110 USB 2.0 PHY driver
|
|
*
|
|
* Copyright (C) 2023 StarFive Technology Co., Ltd.
|
|
* Author: Minda Chen <minda.chen@starfivetech.com>
|
|
*/
|
|
|
|
#include <linux/bits.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/usb/of.h>
|
|
|
|
#define USB_125M_CLK_RATE 125000000
|
|
#define USB_LS_KEEPALIVE_OFF 0x4
|
|
#define USB_LS_KEEPALIVE_ENABLE BIT(4)
|
|
|
|
#define USB_PDRSTN_SPLIT BIT(17)
|
|
#define SYSCON_USB_SPLIT_OFFSET 0x18
|
|
|
|
struct jh7110_usb2_phy {
|
|
struct phy *phy;
|
|
void __iomem *regs;
|
|
struct regmap *sys_syscon;
|
|
struct clk *usb_125m_clk;
|
|
struct clk *app_125m;
|
|
enum phy_mode mode;
|
|
};
|
|
|
|
static void usb2_set_ls_keepalive(struct jh7110_usb2_phy *phy, bool set)
|
|
{
|
|
unsigned int val;
|
|
|
|
/* Host mode enable the LS speed keep-alive signal */
|
|
val = readl(phy->regs + USB_LS_KEEPALIVE_OFF);
|
|
if (set)
|
|
val |= USB_LS_KEEPALIVE_ENABLE;
|
|
else
|
|
val &= ~USB_LS_KEEPALIVE_ENABLE;
|
|
|
|
writel(val, phy->regs + USB_LS_KEEPALIVE_OFF);
|
|
}
|
|
|
|
static int usb2_phy_set_mode(struct phy *_phy,
|
|
enum phy_mode mode, int submode)
|
|
{
|
|
struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy);
|
|
|
|
switch (mode) {
|
|
case PHY_MODE_USB_HOST:
|
|
case PHY_MODE_USB_DEVICE:
|
|
case PHY_MODE_USB_OTG:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (mode != phy->mode) {
|
|
dev_dbg(&_phy->dev, "Changing phy to %d\n", mode);
|
|
phy->mode = mode;
|
|
usb2_set_ls_keepalive(phy, (mode != PHY_MODE_USB_DEVICE));
|
|
}
|
|
|
|
/* Connect usb 2.0 phy mode */
|
|
regmap_update_bits(phy->sys_syscon, SYSCON_USB_SPLIT_OFFSET,
|
|
USB_PDRSTN_SPLIT, USB_PDRSTN_SPLIT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int jh7110_usb2_phy_init(struct phy *_phy)
|
|
{
|
|
struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy);
|
|
int ret;
|
|
|
|
ret = clk_set_rate(phy->usb_125m_clk, USB_125M_CLK_RATE);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_prepare_enable(phy->app_125m);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int jh7110_usb2_phy_exit(struct phy *_phy)
|
|
{
|
|
struct jh7110_usb2_phy *phy = phy_get_drvdata(_phy);
|
|
|
|
clk_disable_unprepare(phy->app_125m);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct phy_ops jh7110_usb2_phy_ops = {
|
|
.init = jh7110_usb2_phy_init,
|
|
.exit = jh7110_usb2_phy_exit,
|
|
.set_mode = usb2_phy_set_mode,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int jh7110_usb_phy_probe(struct platform_device *pdev)
|
|
{
|
|
struct jh7110_usb2_phy *phy;
|
|
struct device *dev = &pdev->dev;
|
|
struct phy_provider *phy_provider;
|
|
|
|
phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
|
|
if (!phy)
|
|
return -ENOMEM;
|
|
|
|
phy->usb_125m_clk = devm_clk_get(dev, "125m");
|
|
if (IS_ERR(phy->usb_125m_clk))
|
|
return dev_err_probe(dev, PTR_ERR(phy->usb_125m_clk),
|
|
"Failed to get 125m clock\n");
|
|
|
|
phy->app_125m = devm_clk_get(dev, "app_125m");
|
|
if (IS_ERR(phy->app_125m))
|
|
return dev_err_probe(dev, PTR_ERR(phy->app_125m),
|
|
"Failed to get app 125m clock\n");
|
|
|
|
phy->regs = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(phy->regs))
|
|
return dev_err_probe(dev, PTR_ERR(phy->regs),
|
|
"Failed to map phy base\n");
|
|
|
|
phy->phy = devm_phy_create(dev, NULL, &jh7110_usb2_phy_ops);
|
|
if (IS_ERR(phy->phy))
|
|
return dev_err_probe(dev, PTR_ERR(phy->phy),
|
|
"Failed to create phy\n");
|
|
|
|
phy_set_drvdata(phy->phy, phy);
|
|
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
|
|
|
|
phy->sys_syscon =
|
|
syscon_regmap_lookup_by_compatible("starfive,jh7110-sys-syscon");
|
|
if (IS_ERR(phy->sys_syscon))
|
|
return dev_err_probe(dev, PTR_ERR(phy->sys_syscon),
|
|
"Failed to get sys-syscon\n");
|
|
|
|
return PTR_ERR_OR_ZERO(phy_provider);
|
|
}
|
|
|
|
static const struct of_device_id jh7110_usb_phy_of_match[] = {
|
|
{ .compatible = "starfive,jh7110-usb-phy" },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, jh7110_usb_phy_of_match);
|
|
|
|
static struct platform_driver jh7110_usb_phy_driver = {
|
|
.probe = jh7110_usb_phy_probe,
|
|
.driver = {
|
|
.of_match_table = jh7110_usb_phy_of_match,
|
|
.name = "jh7110-usb-phy",
|
|
}
|
|
};
|
|
module_platform_driver(jh7110_usb_phy_driver);
|
|
|
|
MODULE_DESCRIPTION("StarFive JH7110 USB 2.0 PHY driver");
|
|
MODULE_AUTHOR("Minda Chen <minda.chen@starfivetech.com>");
|
|
MODULE_LICENSE("GPL");
|