kevin/linux
1
Fork 0
Code
565ac44593
linux/arch/arm/mach-at91
History
Andrew Victor 565ac44593 [ARM] 4907/1: [AT91] SAM9/CAP9 reset reason 
The Reset controller on the SAM9/CAP9 processors will store the reason
for the last system reset.
On startup, display this information (wakeup signal, RTT alarm,
watchdog reset, user reset, etc)

Based on patch from David Brownell.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-04 09:52:23 +01:00
..
at91cap9_devices.c [ARM] 4904/1: [AT91] Pass ECC controller to NAND driver 2008-04-04 09:52:20 +01:00
at91cap9.c [ARM] 4903/1: [AT91] SAM9/CAP9 system shutdown 2008-04-04 09:52:19 +01:00
at91rm9200_devices.c [ARM] 4760/1: [AT91] SPI CS0 errata on AT91RM9200 2008-01-26 15:00:32 +00:00
at91rm9200_time.c
at91rm9200.c [ARM] 4656/1: AT91: Tweak interrupt priorities 2008-01-26 15:00:30 +00:00
at91sam9rl_devices.c [ARM] 4904/1: [AT91] Pass ECC controller to NAND driver 2008-04-04 09:52:20 +01:00
at91sam9rl.c [ARM] 4903/1: [AT91] SAM9/CAP9 system shutdown 2008-04-04 09:52:19 +01:00
at91sam926x_time.c [ARM] xtime_seqlock: fix more ARM machines for xtime deadlocking 2008-02-04 13:14:07 +00:00
at91sam9260_devices.c [ARM] 4904/1: [AT91] Pass ECC controller to NAND driver 2008-04-04 09:52:20 +01:00
at91sam9260.c [ARM] 4903/1: [AT91] SAM9/CAP9 system shutdown 2008-04-04 09:52:19 +01:00
at91sam9261_devices.c [ARM] 4902/1: [AT91] SAM9/CAP9 memory controller header 2008-04-04 09:52:18 +01:00
at91sam9261.c [ARM] 4903/1: [AT91] SAM9/CAP9 system shutdown 2008-04-04 09:52:19 +01:00
at91sam9263_devices.c [ARM] 4904/1: [AT91] Pass ECC controller to NAND driver 2008-04-04 09:52:20 +01:00
at91sam9263.c [ARM] 4903/1: [AT91] SAM9/CAP9 system shutdown 2008-04-04 09:52:19 +01:00
at91x40_time.c
at91x40.c
board-1arm.c
board-cap9adk.c [ARM] 4902/1: [AT91] SAM9/CAP9 memory controller header 2008-04-04 09:52:18 +01:00
board-carmeva.c
board-csb337.c [ARM] 4761/1: [AT91] Board-support for NEW_LEDs 2008-01-26 15:00:32 +00:00
board-csb637.c
board-dk.c [ARM] 4761/1: [AT91] Board-support for NEW_LEDs 2008-01-26 15:00:32 +00:00
board-eb01.c
board-eb9200.c
board-ek.c [ARM] 4761/1: [AT91] Board-support for NEW_LEDs 2008-01-26 15:00:32 +00:00
board-kafa.c
board-kb9202.c
board-picotux200.c
board-sam9rlek.c [ARM] 4905/1: [AT91] Atmel SAM9 boards updated to new-style UART initialization 2008-04-04 09:52:21 +01:00
board-sam9260ek.c [ARM] 4905/1: [AT91] Atmel SAM9 boards updated to new-style UART initialization 2008-04-04 09:52:21 +01:00
board-sam9261ek.c [ARM] 4905/1: [AT91] Atmel SAM9 boards updated to new-style UART initialization 2008-04-04 09:52:21 +01:00
board-sam9263ek.c [ARM] 4905/1: [AT91] Atmel SAM9 boards updated to new-style UART initialization 2008-04-04 09:52:21 +01:00
board-yl-9200.c [ARM] 4825/1: adds support for YL9200 board 2008-03-28 17:37:07 +00:00
clock.c [ARM] 4823/1: AT91 section fix 2008-02-09 22:43:15 +00:00
clock.h
generic.h [ARM] 4739/1: at91sam9263: make gpio bank C and D irqs work 2008-02-04 13:16:39 +00:00
gpio.c [ARM] 4848/1: at91: remove false lockdep warnings 2008-03-06 12:18:18 +00:00
irq.c
Kconfig [ARM] 4660/3: at91: allow selecting UART for early kernel messages 2008-02-04 13:16:39 +00:00
leds.c [ARM] 4758/1: [AT91] LEDs 2008-01-26 15:00:32 +00:00
Makefile [ARM] 4765/1: [AT91] AT91CAP9A-DK board support 2008-01-26 15:01:14 +00:00
Makefile.boot [ARM] 4764/1: [AT91] AT91CAP9 core support 2008-01-26 15:01:13 +00:00
pm.c [ARM] 4907/1: [AT91] SAM9/CAP9 reset reason 2008-04-04 09:52:23 +01:00