1
linux/drivers/net/wireless/wl12xx/wl1271_event.h
Luciano Coelho f5fc0f86b0 wl1271: add wl1271 driver files
This driver supports the wl1271 chipset from Texas Instruments based on the
WiLink(tm) 6.0 mobile platform.  Support for wl1273 should be relatively easy
to add.  This chipset is designed for embedded devices, with good powersaving
capabilities.  The wl1271 chipset is the successor of wl1251 and supports the
802.11b/g/n standards, but currently this driver supports only b/g.

More information about this chipset can be found here:
http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?templateId=6123&navigationId=12762&contentId=29993

Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:12:46 -04:00

111 lines
3.2 KiB
C

/*
* This file is part of wl1271
*
* Copyright (C) 1998-2009 Texas Instruments. All rights reserved.
* Copyright (C) 2008-2009 Nokia Corporation
*
* Contact: Luciano Coelho <luciano.coelho@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#ifndef __WL1271_EVENT_H__
#define __WL1271_EVENT_H__
/*
* Mbox events
*
* The event mechanism is based on a pair of event buffers (buffers A and
* B) at fixed locations in the target's memory. The host processes one
* buffer while the other buffer continues to collect events. If the host
* is not processing events, an interrupt is issued to signal that a buffer
* is ready. Once the host is done with processing events from one buffer,
* it signals the target (with an ACK interrupt) that the event buffer is
* free.
*/
enum {
MEASUREMENT_START_EVENT_ID = BIT(8),
MEASUREMENT_COMPLETE_EVENT_ID = BIT(9),
SCAN_COMPLETE_EVENT_ID = BIT(10),
SCHEDULED_SCAN_COMPLETE_EVENT_ID = BIT(11),
AP_DISCOVERY_COMPLETE_EVENT_ID = BIT(12),
PS_REPORT_EVENT_ID = BIT(13),
PSPOLL_DELIVERY_FAILURE_EVENT_ID = BIT(14),
DISCONNECT_EVENT_COMPLETE_ID = BIT(15),
JOIN_EVENT_COMPLETE_ID = BIT(16),
CHANNEL_SWITCH_COMPLETE_EVENT_ID = BIT(17),
BSS_LOSE_EVENT_ID = BIT(18),
REGAINED_BSS_EVENT_ID = BIT(19),
ROAMING_TRIGGER_MAX_TX_RETRY_EVENT_ID = BIT(20),
SOFT_GEMINI_SENSE_EVENT_ID = BIT(22),
SOFT_GEMINI_PREDICTION_EVENT_ID = BIT(23),
SOFT_GEMINI_AVALANCHE_EVENT_ID = BIT(24),
PLT_RX_CALIBRATION_COMPLETE_EVENT_ID = BIT(25),
DBG_EVENT_ID = BIT(26),
HEALTH_CHECK_REPLY_EVENT_ID = BIT(27),
PERIODIC_SCAN_COMPLETE_EVENT_ID = BIT(28),
PERIODIC_SCAN_REPORT_EVENT_ID = BIT(29),
BA_SESSION_TEAR_DOWN_EVENT_ID = BIT(30),
EVENT_MBOX_ALL_EVENT_ID = 0x7fffffff,
};
struct event_debug_report {
u8 debug_event_id;
u8 num_params;
u16 pad;
u32 report_1;
u32 report_2;
u32 report_3;
} __attribute__ ((packed));
#define NUM_OF_RSSI_SNR_TRIGGERS 8
struct event_mailbox {
u32 events_vector;
u32 events_mask;
u32 reserved_1;
u32 reserved_2;
u8 dbg_event_id;
u8 num_relevant_params;
u16 reserved_3;
u32 event_report_p1;
u32 event_report_p2;
u32 event_report_p3;
u8 number_of_scan_results;
u8 scan_tag;
u8 reserved_4[2];
u32 compl_scheduled_scan_status;
u16 scheduled_scan_attended_channels;
u8 soft_gemini_sense_info;
u8 soft_gemini_protective_info;
s8 rssi_snr_trigger_metric[NUM_OF_RSSI_SNR_TRIGGERS];
u8 channel_switch_status;
u8 scheduled_scan_status;
u8 ps_status;
u8 reserved_5[29];
} __attribute__ ((packed));
int wl1271_event_unmask(struct wl1271 *wl);
void wl1271_event_mbox_config(struct wl1271 *wl);
int wl1271_event_handle(struct wl1271 *wl, u8 mbox);
#endif