1
linux/drivers/usb
Alan Stern 543f7810fb usb-storage: implement "soft" unbinding
This patch (as1092) implements "soft" unbinding for usb-storage.  When
the disconnect routine is called, all commands and reset delays are
allowed to complete normally until after scsi_remove_host() returns.
This means that the commands needed for an orderly shutdown will be
sent through to the device.

Unlike before, the driver will now execute every command that it
accepts.  Hence there's no need for special code to catch unexecuted
commands and fail them.

The new sequence of events when disconnect runs goes as follows:

	If the device is truly unplugged, set the DISCONNECTING
	flag so we won't try to access it any more.

	If the SCSI-scanning thread hasn't started up yet, prevent
	it from doing anything by setting the new DONT_SCAN flag.
	Then wake it up and wait for it to terminate.

	Remove the SCSI host.  This unbinds the upper-level drivers,
	doing an orderly shutdown.  Commands sent to quiesce the
	device will be transmitted normally, unless the device is
	unplugged.

	Set the DISCONNECTING flag so that we won't accept any new
	commands that might get submitted (there aren't supposed to be
	any) and we won't try to access the device for resets.

	Tell the control thread to exit by waking it up with no
	pending command, and wait for it to terminate.

	Go on to do all the other normal stuff: releasing resources,
	freeing memory, and so on.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 15:15:54 -07:00
..
atm cxacru: treat firmware data as const 2008-07-10 14:26:14 +01:00
c67x00 usb/c67x00 endianness annotations 2008-06-04 08:06:01 -07:00
class USB: fix cdc-acm resume() 2008-07-03 18:20:36 -07:00
core USB: implement "soft" unbinding 2008-07-21 15:15:54 -07:00
gadget USB: usb dev_set_name() instead of dev->bus_id 2008-07-21 15:15:47 -07:00
host USB: isp1760-hcd.c: make 2 functions static 2008-07-21 15:15:54 -07:00
image
misc emi62: use request_firmware() 2008-07-10 14:49:14 +01:00
mon USB Monitor: BKL pushdown 2008-06-20 14:05:53 -06:00
serial USB: io_ti: FIrst cut at a big clean up 2008-07-21 15:15:53 -07:00
storage usb-storage: implement "soft" unbinding 2008-07-21 15:15:54 -07:00
Kconfig
Makefile USB: add Cypress c67x00 OTG controller HCD driver 2008-05-02 10:25:57 -07:00
README
usb-skeleton.c USB: remove unnecessary type casting of urb->context 2008-04-24 21:16:55 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.