kevin/linux
1
Fork 0
Code
53dacb1570
linux/drivers/media/video/cx231xx/cx231xx-i2c.c
Jean Delvare e81516c58e V4L/DVB (12343): Stop defining I2C adapter IDs nobody uses 
There is no point in defining I2C adapter IDs when no code is using
them. As this field might go away in the future, stop using it when
we don't need to.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12 12:18:13 -03:00

529 lines
13 KiB
C
Raw Blame History

/*
cx231xx-i2c.c - driver for Conexant Cx23100/101/102 USB video capture devices
Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
Based on em28xx driver
Based on Cx23885 driver
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/usb.h>
#include <linux/i2c.h>
#include <media/v4l2-common.h>
#include <media/tuner.h>
#include "cx231xx.h"
/* ----------------------------------------------------------- */
static unsigned int i2c_scan;
module_param(i2c_scan, int, 0444);
MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time");
static unsigned int i2c_debug;
module_param(i2c_debug, int, 0644);
MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
#define dprintk1(lvl, fmt, args...) \
do { \
if (i2c_debug >= lvl) { \
printk(fmt, ##args); \
} \
} while (0)
#define dprintk2(lvl, fmt, args...) \
do { \
if (i2c_debug >= lvl) { \
printk(KERN_DEBUG "%s at %s: " fmt, \
dev->name, __func__ , ##args); \
} \
} while (0)
/*
* cx231xx_i2c_send_bytes()
*/
int cx231xx_i2c_send_bytes(struct i2c_adapter *i2c_adap,
const struct i2c_msg *msg)
{
struct cx231xx_i2c *bus = i2c_adap->algo_data;
struct cx231xx *dev = bus->dev;
struct cx231xx_i2c_xfer_data req_data;
int status = 0;
u16 size = 0;
u8 loop = 0;
u8 saddr_len = 1;
u8 *buf_ptr = NULL;
u16 saddr = 0;
u8 need_gpio = 0;
if ((bus->nr == 1) && (msg->addr == 0x61)
&& (dev->tuner_type == TUNER_XC5000)) {
size = msg->len;
if (size == 2) { /* register write sub addr */
/* Just writing sub address will cause problem
* to XC5000. So ignore the request */
return 0;
} else if (size == 4) { /* register write with sub addr */
if (msg->len >= 2)
saddr = msg->buf[0] << 8 | msg->buf[1];
else if (msg->len == 1)
saddr = msg->buf[0];
switch (saddr) {
case 0x0000: /* start tuner calibration mode */
need_gpio = 1;
/* FW Loading is done */
dev->xc_fw_load_done = 1;
break;
case 0x000D: /* Set signal source */
case 0x0001: /* Set TV standard - Video */
case 0x0002: /* Set TV standard - Audio */
case 0x0003: /* Set RF Frequency */
need_gpio = 1;
break;
default:
if (dev->xc_fw_load_done)
need_gpio = 1;
break;
}
if (need_gpio) {
dprintk1(1,
"GPIO WRITE: addr 0x%x, len %d, saddr 0x%x\n",
msg->addr, msg->len, saddr);
return dev->cx231xx_gpio_i2c_write(dev,
msg->addr,
msg->buf,
msg->len);
}
}
/* special case for Xc5000 tuner case */
saddr_len = 1;
/* adjust the length to correct length */
size -= saddr_len;
buf_ptr = (u8 *) (msg->buf + 1);
do {
/* prepare xfer_data struct */
req_data.dev_addr = msg->addr;
req_data.direction = msg->flags;
req_data.saddr_len = saddr_len;
req_data.saddr_dat = msg->buf[0];
req_data.buf_size = size > 16 ? 16 : size;
req_data.p_buffer = (u8 *) (buf_ptr + loop * 16);
bus->i2c_nostop = (size > 16) ? 1 : 0;
bus->i2c_reserve = (loop == 0) ? 0 : 1;
/* usb send command */
status = dev->cx231xx_send_usb_command(bus, &req_data);
loop++;
if (size >= 16)
size -= 16;
else
size = 0;
} while (size > 0);
bus->i2c_nostop = 0;
bus->i2c_reserve = 0;
} else { /* regular case */
/* prepare xfer_data struct */
req_data.dev_addr = msg->addr;
req_data.direction = msg->flags;
req_data.saddr_len = 0;
req_data.saddr_dat = 0;
req_data.buf_size = msg->len;
req_data.p_buffer = msg->buf;
/* usb send command */
status = dev->cx231xx_send_usb_command(bus, &req_data);
}
return status < 0 ? status : 0;
}
/*
* cx231xx_i2c_recv_bytes()
* read a byte from the i2c device
*/
static int cx231xx_i2c_recv_bytes(struct i2c_adapter *i2c_adap,
const struct i2c_msg *msg)
{
struct cx231xx_i2c *bus = i2c_adap->algo_data;
struct cx231xx *dev = bus->dev;
struct cx231xx_i2c_xfer_data req_data;
int status = 0;
u16 saddr = 0;
u8 need_gpio = 0;
if ((bus->nr == 1) && (msg->addr == 0x61)
&& dev->tuner_type == TUNER_XC5000) {
if (msg->len == 2)
saddr = msg->buf[0] << 8 | msg->buf[1];
else if (msg->len == 1)
saddr = msg->buf[0];
if (dev->xc_fw_load_done) {
switch (saddr) {
case 0x0009: /* BUSY check */
dprintk1(1,
"GPIO R E A D: Special case BUSY check \n");
/*Try read BUSY register, just set it to zero*/
msg->buf[0] = 0;
if (msg->len == 2)
msg->buf[1] = 0;
return 0;
case 0x0004: /* read Lock status */
need_gpio = 1;
break;
}
if (need_gpio) {
/* this is a special case to handle Xceive tuner
clock stretch issue with gpio based I2C */
dprintk1(1,
"GPIO R E A D: addr 0x%x, len %d, saddr 0x%x\n",
msg->addr, msg->len,
msg->buf[0] << 8 | msg->buf[1]);
status =
dev->cx231xx_gpio_i2c_write(dev, msg->addr,
msg->buf,
msg->len);
status =
dev->cx231xx_gpio_i2c_read(dev, msg->addr,
msg->buf,
msg->len);
return status;
}
}
/* prepare xfer_data struct */
req_data.dev_addr = msg->addr;
req_data.direction = msg->flags;
req_data.saddr_len = msg->len;
req_data.saddr_dat = msg->buf[0] << 8 | msg->buf[1];
req_data.buf_size = msg->len;
req_data.p_buffer = msg->buf;
/* usb send command */
status = dev->cx231xx_send_usb_command(bus, &req_data);
} else {
/* prepare xfer_data struct */
req_data.dev_addr = msg->addr;
req_data.direction = msg->flags;
req_data.saddr_len = 0;
req_data.saddr_dat = 0;
req_data.buf_size = msg->len;
req_data.p_buffer = msg->buf;
/* usb send command */
status = dev->cx231xx_send_usb_command(bus, &req_data);
}
return status < 0 ? status : 0;
}
/*
* cx231xx_i2c_recv_bytes_with_saddr()
* read a byte from the i2c device
*/
static int cx231xx_i2c_recv_bytes_with_saddr(struct i2c_adapter *i2c_adap,
const struct i2c_msg *msg1,
const struct i2c_msg *msg2)
{
struct cx231xx_i2c *bus = i2c_adap->algo_data;
struct cx231xx *dev = bus->dev;
struct cx231xx_i2c_xfer_data req_data;
int status = 0;
u16 saddr = 0;
u8 need_gpio = 0;
if (msg1->len == 2)
saddr = msg1->buf[0] << 8 | msg1->buf[1];
else if (msg1->len == 1)
saddr = msg1->buf[0];
if ((bus->nr == 1) && (msg2->addr == 0x61)
&& dev->tuner_type == TUNER_XC5000) {
if ((msg2->len < 16)) {
dprintk1(1,
"i2c_read: addr 0x%x, len %d, saddr 0x%x, len %d\n",
msg2->addr, msg2->len, saddr, msg1->len);
switch (saddr) {
case 0x0008: /* read FW load status */
need_gpio = 1;
break;
case 0x0004: /* read Lock status */
need_gpio = 1;
break;
}
if (need_gpio) {
status =
dev->cx231xx_gpio_i2c_write(dev, msg1->addr,
msg1->buf,
msg1->len);
status =
dev->cx231xx_gpio_i2c_read(dev, msg2->addr,
msg2->buf,
msg2->len);
return status;
}
}
}
/* prepare xfer_data struct */
req_data.dev_addr = msg2->addr;
req_data.direction = msg2->flags;
req_data.saddr_len = msg1->len;
req_data.saddr_dat = saddr;
req_data.buf_size = msg2->len;
req_data.p_buffer = msg2->buf;
/* usb send command */
status = dev->cx231xx_send_usb_command(bus, &req_data);
return status < 0 ? status : 0;
}
/*
* cx231xx_i2c_check_for_device()
* check if there is a i2c_device at the supplied address
*/
static int cx231xx_i2c_check_for_device(struct i2c_adapter *i2c_adap,
const struct i2c_msg *msg)
{
struct cx231xx_i2c *bus = i2c_adap->algo_data;
struct cx231xx *dev = bus->dev;
struct cx231xx_i2c_xfer_data req_data;
int status = 0;
/* prepare xfer_data struct */
req_data.dev_addr = msg->addr;
req_data.direction = msg->flags;
req_data.saddr_len = 0;
req_data.saddr_dat = 0;
req_data.buf_size = 0;
req_data.p_buffer = NULL;
/* usb send command */
status = dev->cx231xx_send_usb_command(bus, &req_data);
return status < 0 ? status : 0;
}
/*
* cx231xx_i2c_xfer()
* the main i2c transfer function
*/
static int cx231xx_i2c_xfer(struct i2c_adapter *i2c_adap,
struct i2c_msg msgs[], int num)
{
struct cx231xx_i2c *bus = i2c_adap->algo_data;
struct cx231xx *dev = bus->dev;
int addr, rc, i, byte;
if (num <= 0)
return 0;
for (i = 0; i < num; i++) {
addr = msgs[i].addr >> 1;
dprintk2(2, "%s %s addr=%x len=%d:",
(msgs[i].flags & I2C_M_RD) ? "read" : "write",
i == num - 1 ? "stop" : "nonstop", addr, msgs[i].len);
if (!msgs[i].len) {
/* no len: check only for device presence */
rc = cx231xx_i2c_check_for_device(i2c_adap, &msgs[i]);
if (rc < 0) {
dprintk2(2, " no device\n");
return rc;
}
} else if (msgs[i].flags & I2C_M_RD) {
/* read bytes */
rc = cx231xx_i2c_recv_bytes(i2c_adap, &msgs[i]);
if (i2c_debug >= 2) {
for (byte = 0; byte < msgs[i].len; byte++)
printk(" %02x", msgs[i].buf[byte]);
}
} else if (i + 1 < num && (msgs[i + 1].flags & I2C_M_RD) &&
msgs[i].addr == msgs[i + 1].addr
&& (msgs[i].len <= 2) && (bus->nr < 2)) {
/* read bytes */
rc = cx231xx_i2c_recv_bytes_with_saddr(i2c_adap,
&msgs[i],
&msgs[i + 1]);
if (i2c_debug >= 2) {
for (byte = 0; byte < msgs[i].len; byte++)
printk(" %02x", msgs[i].buf[byte]);
}
i++;
} else {
/* write bytes */
if (i2c_debug >= 2) {
for (byte = 0; byte < msgs[i].len; byte++)
printk(" %02x", msgs[i].buf[byte]);
}
rc = cx231xx_i2c_send_bytes(i2c_adap, &msgs[i]);
}
if (rc < 0)
goto err;
if (i2c_debug >= 2)
printk("\n");
}
return num;
err:
dprintk2(2, " ERROR: %i\n", rc);
return rc;
}
/* ----------------------------------------------------------- */
/*
* functionality()
*/
static u32 functionality(struct i2c_adapter *adap)
{
return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C;
}
static struct i2c_algorithm cx231xx_algo = {
.master_xfer = cx231xx_i2c_xfer,
.functionality = functionality,
};
static struct i2c_adapter cx231xx_adap_template = {
.owner = THIS_MODULE,
.name = "cx231xx",
.algo = &cx231xx_algo,
};
static struct i2c_client cx231xx_client_template = {
.name = "cx231xx internal",
};
/* ----------------------------------------------------------- */
/*
* i2c_devs
* incomplete list of known devices
*/
static char *i2c_devs[128] = {
[0x60 >> 1] = "colibri",
[0x88 >> 1] = "hammerhead",
[0x8e >> 1] = "CIR",
[0x32 >> 1] = "GeminiIII",
[0x02 >> 1] = "Aquarius",
[0xa0 >> 1] = "eeprom",
[0xc0 >> 1] = "tuner/XC3028",
[0xc2 >> 1] = "tuner/XC5000",
};
/*
* cx231xx_do_i2c_scan()
* check i2c address range for devices
*/
void cx231xx_do_i2c_scan(struct cx231xx *dev, struct i2c_client *c)
{
unsigned char buf;
int i, rc;
cx231xx_info(": Checking for I2C devices ..\n");
for (i = 0; i < 128; i++) {
c->addr = i;
rc = i2c_master_recv(c, &buf, 0);
if (rc < 0)
continue;
cx231xx_info("%s: i2c scan: found device @ 0x%x [%s]\n",
dev->name, i << 1,
i2c_devs[i] ? i2c_devs[i] : "???");
}
cx231xx_info(": Completed Checking for I2C devices.\n");
}
/*
* cx231xx_i2c_register()
* register i2c bus
*/
int cx231xx_i2c_register(struct cx231xx_i2c *bus)
{
struct cx231xx *dev = bus->dev;
BUG_ON(!dev->cx231xx_send_usb_command);
memcpy(&bus->i2c_adap, &cx231xx_adap_template, sizeof(bus->i2c_adap));
memcpy(&bus->i2c_algo, &cx231xx_algo, sizeof(bus->i2c_algo));
memcpy(&bus->i2c_client, &cx231xx_client_template,
sizeof(bus->i2c_client));
bus->i2c_adap.dev.parent = &dev->udev->dev;
strlcpy(bus->i2c_adap.name, bus->dev->name, sizeof(bus->i2c_adap.name));
bus->i2c_algo.data = bus;
bus->i2c_adap.algo_data = bus;
i2c_set_adapdata(&bus->i2c_adap, &dev->v4l2_dev);
i2c_add_adapter(&bus->i2c_adap);
bus->i2c_client.adapter = &bus->i2c_adap;
if (0 == bus->i2c_rc) {
if (i2c_scan)
cx231xx_do_i2c_scan(dev, &bus->i2c_client);
/* Instantiate the IR receiver device, if present */
cx231xx_register_i2c_ir(dev);
} else
cx231xx_warn("%s: i2c bus %d register FAILED\n",
dev->name, bus->nr);
return bus->i2c_rc;
}
/*
* cx231xx_i2c_unregister()
* unregister i2c_bus
*/
int cx231xx_i2c_unregister(struct cx231xx_i2c *bus)
{
i2c_del_adapter(&bus->i2c_adap);
return 0;
}
View Git Blame Copy Permalink