1
linux/drivers/usb
Sarah Sharp 4da6e6f247 xhci 1.0: Update TD size field format.
The xHCI 1.0 specification changes the format of the TD size field in
Normal and Isochronous TRBs.  The field in control TRBs is still set to
reserved zero.  Instead of representing the number of bytes left to
transfer in the TD (including the current TRB's buffer), it now represents
the number of packets left to transfer (*not* including this TRB).

See section 4.11.2.4 of the xHCI 1.0 specification for details.  The math
is basically copied straight from there.

Create a new function, xhci_v1_0_td_remainder(), that should be called for
all xHCI 1.0 host controllers.  The field location and maximum value is
still the same, so reuse the old function, xhci_td_remainder(), to handle
the bit shifting.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2011-05-02 16:42:55 -07:00
..
atm Fix common misspellings 2011-03-31 11:26:23 -03:00
c67x00 Fix common misspellings 2011-03-31 11:26:23 -03:00
class USB: cdc-wdm: reset handling according to new requirements 2011-04-29 17:04:40 -07:00
core usbcore: warm reset USB3 port in SS.Inactive state 2011-05-02 16:42:54 -07:00
early Fix common misspellings 2011-03-31 11:26:23 -03:00
gadget usb: gadget: storage_common: use kstrto*() [bug fix] 2011-04-29 17:24:36 -07:00
host xhci 1.0: Update TD size field format. 2011-05-02 16:42:55 -07:00
image Fix common misspellings 2011-03-31 11:26:23 -03:00
misc USB: add queued-unlinks test case to usbtest driver 2011-04-29 17:24:38 -07:00
mon
musb usb: musb: omap2430: fix build failure 2011-04-13 15:44:02 -07:00
otg USB: twl4030-usb: Report correct vbus value for accessory charger adapters1 2011-04-13 16:48:17 -07:00
renesas_usbhs usb: renesas_usbhs: add autonomy mode 2011-04-29 17:24:35 -07:00
serial Bind only modem AT command endpoint to option module. 2011-04-29 17:05:06 -07:00
storage Fix common misspellings 2011-03-31 11:26:23 -03:00
wusbcore Fix common misspellings 2011-03-31 11:26:23 -03:00
Kconfig Merge 2.6.39-rc4 into usb-next 2011-04-19 05:50:38 -07:00
Makefile usb: don't enter usb subdirectories directly 2011-04-13 16:34:53 -07:00
README
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.