kevin/linux
1
Fork 0
Code
4cb2dc67d1
linux/arch/arm/mach-omap1
History
Janusz Krzysztofik 4cb2dc67d1 OMAP1: Amstrad Delta: update board initialization code forcomplete modem IRQ GPIO line setup 
In case of Amstrad Delta modem utilized GPIO line, interrupt is requested from
standard serial8250 driver code without first requesting the GPIO pin itself.
Even if it works with default OMAP GPIO interrupt handler, it appeared not
compatible with recent, optimized version of the board GPIO FIQ handler,
required for fast processing of interrupts generated by other GPIO pin that a
serial keyboard clock hangs off.

This patch fills the board specific modem initialization routine with common
GPIO line reservation and direction setup.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-05 11:11:10 -07:00
..
include/mach OMAP1: Amstrad Delta: add a handler for processing interruptsgenerated by the FIQ routine 2010-05-05 11:11:10 -07:00
ams-delta-fiq-handler.S OMAP1: Amstrad Delta: add FIQ handler for serial keyboardport interrupt processing 2010-05-05 11:11:10 -07:00
ams-delta-fiq.c OMAP1: Amstrad Delta: add a handler for processing interruptsgenerated by the FIQ routine 2010-05-05 11:11:10 -07:00
board-ams-delta.c OMAP1: Amstrad Delta: update board initialization code forcomplete modem IRQ GPIO line setup 2010-05-05 11:11:10 -07:00
board-fsample.c omap: convert boards to use physmap-flash 2010-02-15 10:03:32 -08:00
board-generic.c Merge branch '7xx-iosplit-plat' with omap-fixes 2009-11-10 18:10:34 -08:00
board-h2-mmc.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
board-h2.c omap: convert boards to use physmap-flash 2010-02-15 10:03:32 -08:00
board-h2.h ARM: OMAP: No need to include board-h2.h from hardware.h 2009-03-23 18:07:33 -07:00
board-h3-mmc.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
board-h3.c omap: convert boards to use physmap-flash 2010-02-15 10:03:32 -08:00
board-h3.h ARM: OMAP: No need to include board-h3.h from hardware.h 2009-03-23 18:07:33 -07:00
board-htcherald.c omap1: Add omap7xx USB support 2009-12-11 16:16:34 -08:00
board-innovator.c omap: convert boards to use physmap-flash 2010-02-15 10:03:32 -08:00
board-nokia770.c OMAP: OMAPFB: split omapfb.h 2009-12-09 12:04:06 +02:00
board-osk.c omap: convert boards to use physmap-flash 2010-02-15 10:03:32 -08:00
board-palmte.c omap: convert boards to use physmap-flash 2010-02-15 10:03:32 -08:00
board-palmtt.c omap: convert boards to use physmap-flash 2010-02-15 10:03:32 -08:00
board-palmz71.c omap: convert boards to use physmap-flash 2010-02-15 10:03:32 -08:00
board-perseus2.c omap: convert boards to use physmap-flash 2010-02-15 10:03:32 -08:00
board-sx1-mmc.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
board-sx1.c omap: convert boards to use physmap-flash 2010-02-15 10:03:32 -08:00
board-voiceblue.c omap: convert boards to use physmap-flash 2010-02-15 10:03:32 -08:00
clock_data.c OMAP4: clock: Add dummy clock nodes for interface clocks 2010-02-24 17:45:17 -07:00
clock.c OMAP4: clock: Add dummy clock nodes for interface clocks 2010-02-24 17:45:17 -07:00
clock.h OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c 2009-12-11 17:00:40 -07:00
devices.c omap1: mailbox: kill compile warning 2010-02-15 10:03:33 -08:00
flash.c omap: convert boards to use physmap-flash 2010-02-15 10:03:32 -08:00
fpga.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
i2c.c omap: i2c: Fix muxing for command line enabled bus 2010-02-25 14:45:08 -08:00
id.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
io.c OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c 2009-12-11 17:00:40 -07:00
irq.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
Kconfig OMAP1: Amstrad Delta: add FIQ handler for serial keyboardport interrupt processing 2010-05-05 11:11:10 -07:00
lcd_dma.c omap1: LCD_DMA: Use some define rather than a hexadecimal 2009-12-11 16:16:36 -08:00
leds-h2p2-debug.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
leds-innovator.c [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach 2008-08-07 09:55:48 +01:00
leds-osk.c ARM: OMAP: switch to standard gpio get/set calls 2008-12-10 17:35:25 -08:00
leds.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
leds.h
mailbox.c omap1: mailbox: kill compile warning 2010-02-15 10:03:33 -08:00
Makefile OMAP1: Amstrad Delta: add a handler for processing interruptsgenerated by the FIQ routine 2010-05-05 11:11:10 -07:00
Makefile.boot
mcbsp.c include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h 2010-03-30 22:02:32 +09:00
mux.c omap1: Add 7xx clocks and pin muxes for SPI 2010-01-08 10:29:05 -08:00
opp_data.c OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c 2009-12-11 17:00:40 -07:00
opp.h OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c 2009-12-11 17:00:40 -07:00
pm.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
pm.h OMAP850: PM: Add an ARCH_OMAP850 check 2009-10-07 23:14:08 +01:00
serial.c omap: Clean the serial port defines 2010-02-15 08:48:53 -08:00
sleep.S OMAP7XX: Rename all the rest of the omap730 references in omap1 core 2009-10-07 23:14:06 +01:00
sram.S OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead 2009-08-28 10:50:33 -07:00
time.c OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead 2009-08-28 10:50:33 -07:00
timer32k.c arm: omap1: remove dead code from timer32k.c 2010-04-22 17:32:36 -07:00