kevin/linux
1
Fork 0
Code
4b6d287f62
linux/include/asm-ppc/pci.h
David S. Miller 085ae41f66 [PATCH] Make sparc64 use setup-res.c 
There were three changes necessary in order to allow
sparc64 to use setup-res.c:

1) Sparc64 roots the PCI I/O and MEM address space using
   parent resources contained in the PCI controller structure.
   I'm actually surprised no other platforms do this, especially
   ones like Alpha and PPC{,64}.  These resources get linked into the
   iomem/ioport tree when PCI controllers are probed.

   So the hierarchy looks like this:

   iomem --|
	   PCI controller 1 MEM space --|
				        device 1
					device 2
					etc.
	   PCI controller 2 MEM space --|
				        ...
   ioport --|
            PCI controller 1 IO space --|
					...
            PCI controller 2 IO space --|
					...

   You get the idea.  The drivers/pci/setup-res.c code allocates
   using plain iomem_space and ioport_space as the root, so that
   wouldn't work with the above setup.

   So I added a pcibios_select_root() that is used to handle this.
   It uses the PCI controller struct's io_space and mem_space on
   sparc64, and io{port,mem}_resource on every other platform to
   keep current behavior.

2) quirk_io_region() is buggy.  It takes in raw BUS view addresses
   and tries to use them as a PCI resource.

   pci_claim_resource() expects the resource to be fully formed when
   it gets called.  The sparc64 implementation would do the translation
   but that's absolutely wrong, because if the same resource gets
   released then re-claimed we'll adjust things twice.

   So I fixed up quirk_io_region() to do the proper pcibios_bus_to_resource()
   conversion before passing it on to pci_claim_resource().

3) I was mistakedly __init'ing the function methods the PCI controller
   drivers provide on sparc64 to implement some parts of these
   routines.  This was, of course, easy to fix.

So we end up with the following, and that nasty SPARC64 makefile
ifdef in drivers/pci/Makefile is finally zapped.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 14:57:25 -07:00

142 lines
3.9 KiB
C
Raw Blame History

#ifndef __PPC_PCI_H
#define __PPC_PCI_H
#ifdef __KERNEL__
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <asm/scatterlist.h>
#include <asm/io.h>
#include <asm/pci-bridge.h>
#include <asm-generic/pci-dma-compat.h>
struct pci_dev;
/* Values for the `which' argument to sys_pciconfig_iobase syscall. */
#define IOBASE_BRIDGE_NUMBER 0
#define IOBASE_MEMORY 1
#define IOBASE_IO 2
#define IOBASE_ISA_IO 3
#define IOBASE_ISA_MEM 4
/*
* Set this to 1 if you want the kernel to re-assign all PCI
* bus numbers
*/
extern int pci_assign_all_busses;
#define pcibios_assign_all_busses() (pci_assign_all_busses)
#define pcibios_scan_all_fns(a, b) 0
#define PCIBIOS_MIN_IO 0x1000
#define PCIBIOS_MIN_MEM 0x10000000
extern inline void pcibios_set_master(struct pci_dev *dev)
{
/* No special bus mastering setup handling */
}
extern inline void pcibios_penalize_isa_irq(int irq, int active)
{
/* We don't do dynamic PCI IRQ allocation */
}
extern unsigned long pci_resource_to_bus(struct pci_dev *pdev, struct resource *res);
/*
* The PCI bus bridge can translate addresses issued by the processor(s)
* into a different address on the PCI bus. On 32-bit cpus, we assume
* this mapping is 1-1, but on 64-bit systems it often isn't.
*
* Obsolete ! Drivers should now use pci_resource_to_bus
*/
extern unsigned long phys_to_bus(unsigned long pa);
extern unsigned long pci_phys_to_bus(unsigned long pa, int busnr);
extern unsigned long pci_bus_to_phys(unsigned int ba, int busnr);
/* The PCI address space does equal the physical memory
* address space. The networking and block device layers use
* this boolean for bounce buffer decisions.
*/
#define PCI_DMA_BUS_IS_PHYS (1)
/* pci_unmap_{page,single} is a nop so... */
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
#define pci_unmap_addr(PTR, ADDR_NAME) (0)
#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
#define pci_unmap_len(PTR, LEN_NAME) (0)
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
unsigned long *strategy_parameter)
{
*strat = PCI_DMA_BURST_INFINITY;
*strategy_parameter = ~0UL;
}
#endif
/*
* At present there are very few 32-bit PPC machines that can have
* memory above the 4GB point, and we don't support that.
*/
#define pci_dac_dma_supported(pci_dev, mask) (0)
/* Return the index of the PCI controller for device PDEV. */
#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
/* Set the name of the bus as it appears in /proc/bus/pci */
static inline int pci_proc_domain(struct pci_bus *bus)
{
return 0;
}
/* Map a range of PCI memory or I/O space for a device into user space */
int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine);
/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */
#define HAVE_PCI_MMAP 1
extern void
pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
struct resource *res);
extern void
pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
struct pci_bus_region *region);
static inline struct resource *
pcibios_select_root(struct pci_dev *pdev, struct resource *res)
{
struct resource *root = NULL;
if (res->flags & IORESOURCE_IO)
root = &ioport_resource;
if (res->flags & IORESOURCE_MEM)
root = &iomem_resource;
return root;
}
extern void pcibios_add_platform_entries(struct pci_dev *dev);
struct file;
extern pgprot_t pci_phys_mem_access_prot(struct file *file,
unsigned long offset,
unsigned long size,
pgprot_t prot);
#define HAVE_ARCH_PCI_RESOURCE_TO_USER
extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
const struct resource *rsrc,
u64 *start, u64 *end);
#endif /* __KERNEL__ */
#endif /* __PPC_PCI_H */
View Git Blame Copy Permalink