kevin/linux
1
Fork 0
Code
4b2e790a4d
linux/drivers/usb/host/ohci-hcd.c
David Brownell fdd13b36c4 [PATCH] USB: OHCI relies less on NDP register 
Some OHCI implementations have differences in the way the NDP register
(in roothub_a) reports the number of ports present. This patch allows the
platform specific code to optionally supply the number of ports. The
driver just reads the value at init (if not supplied) instead of reading
it every time its needed (except for an AMD756 bug workaround).

It also sets the value correctly for the ARM pxa27x architecture.

Signed-Off-By: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-12 12:23:46 -07:00

927 lines
26 KiB
C
Raw Blame History

/*
* OHCI HCD (Host Controller Driver) for USB.
*
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
*
* [ Initialisation is based on Linus' ]
* [ uhci code and gregs ohci fragments ]
* [ (C) Copyright 1999 Linus Torvalds ]
* [ (C) Copyright 1999 Gregory P. Smith]
*
*
* OHCI is the main "non-Intel/VIA" standard for USB 1.1 host controller
* interfaces (though some non-x86 Intel chips use it). It supports
* smarter hardware than UHCI. A download link for the spec available
* through the http://www.usb.org website.
*
* History:
*
* 2004/03/24 LH7A404 support (Durgesh Pattamatta & Marc Singer)
* 2004/02/04 use generic dma_* functions instead of pci_* (dsaxena@plexity.net)
* 2003/02/24 show registers in sysfs (Kevin Brosius)
*
* 2002/09/03 get rid of ed hashtables, rework periodic scheduling and
* bandwidth accounting; if debugging, show schedules in driverfs
* 2002/07/19 fixes to management of ED and schedule state.
* 2002/06/09 SA-1111 support (Christopher Hoover)
* 2002/06/01 remember frame when HC won't see EDs any more; use that info
* to fix urb unlink races caused by interrupt latency assumptions;
* minor ED field and function naming updates
* 2002/01/18 package as a patch for 2.5.3; this should match the
* 2.4.17 kernel modulo some bugs being fixed.
*
* 2001/10/18 merge pmac cleanup (Benjamin Herrenschmidt) and bugfixes
* from post-2.4.5 patches.
* 2001/09/20 URB_ZERO_PACKET support; hcca_dma portability, OPTi warning
* 2001/09/07 match PCI PM changes, errnos from Linus' tree
* 2001/05/05 fork 2.4.5 version into "hcd" framework, cleanup, simplify;
* pbook pci quirks gone (please fix pbook pci sw!) (db)
*
* 2001/04/08 Identify version on module load (gb)
* 2001/03/24 td/ed hashing to remove bus_to_virt (Steve Longerbeam);
pci_map_single (db)
* 2001/03/21 td and dev/ed allocation uses new pci_pool API (db)
* 2001/03/07 hcca allocation uses pci_alloc_consistent (Steve Longerbeam)
*
* 2000/09/26 fixed races in removing the private portion of the urb
* 2000/09/07 disable bulk and control lists when unlinking the last
* endpoint descriptor in order to avoid unrecoverable errors on
* the Lucent chips. (rwc@sgi)
* 2000/08/29 use bandwidth claiming hooks (thanks Randy!), fix some
* urb unlink probs, indentation fixes
* 2000/08/11 various oops fixes mostly affecting iso and cleanup from
* device unplugs.
* 2000/06/28 use PCI hotplug framework, for better power management
* and for Cardbus support (David Brownell)
* 2000/earlier: fixes for NEC/Lucent chips; suspend/resume handling
* when the controller loses power; handle UE; cleanup; ...
*
* v5.2 1999/12/07 URB 3rd preview,
* v5.1 1999/11/30 URB 2nd preview, cpia, (usb-scsi)
* v5.0 1999/11/22 URB Technical preview, Paul Mackerras powerbook susp/resume
* i386: HUB, Keyboard, Mouse, Printer
*
* v4.3 1999/10/27 multiple HCs, bulk_request
* v4.2 1999/09/05 ISO API alpha, new dev alloc, neg Error-codes
* v4.1 1999/08/27 Randy Dunlap's - ISO API first impl.
* v4.0 1999/08/18
* v3.0 1999/06/25
* v2.1 1999/05/09 code clean up
* v2.0 1999/05/04
* v1.0 1999/04/27 initial release
*
* This file is licenced under the GPL.
*/
#include <linux/config.h>
#ifdef CONFIG_USB_DEBUG
# define DEBUG
#else
# undef DEBUG
#endif
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/timer.h>
#include <linux/list.h>
#include <linux/usb.h>
#include <linux/usb_otg.h>
#include <linux/dma-mapping.h>
#include <linux/dmapool.h>
#include <linux/reboot.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/unaligned.h>
#include <asm/byteorder.h>
#include "../core/hcd.h"
#define DRIVER_VERSION "2005 April 22"
#define DRIVER_AUTHOR "Roman Weissgaerber, David Brownell"
#define DRIVER_DESC "USB 1.1 'Open' Host Controller (OHCI) Driver"
/*-------------------------------------------------------------------------*/
// #define OHCI_VERBOSE_DEBUG /* not always helpful */
/* For initializing controller (mask in an HCFS mode too) */
#define OHCI_CONTROL_INIT OHCI_CTRL_CBSR
#define OHCI_INTR_INIT \
(OHCI_INTR_MIE | OHCI_INTR_UE | OHCI_INTR_RD | OHCI_INTR_WDH)
#ifdef __hppa__
/* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
#define IR_DISABLE
#endif
#ifdef CONFIG_ARCH_OMAP
/* OMAP doesn't support IR (no SMM; not needed) */
#define IR_DISABLE
#endif
/*-------------------------------------------------------------------------*/
static const char hcd_name [] = "ohci_hcd";
#include "ohci.h"
static void ohci_dump (struct ohci_hcd *ohci, int verbose);
static int ohci_init (struct ohci_hcd *ohci);
static void ohci_stop (struct usb_hcd *hcd);
static int ohci_reboot (struct notifier_block *, unsigned long , void *);
#include "ohci-hub.c"
#include "ohci-dbg.c"
#include "ohci-mem.c"
#include "ohci-q.c"
/*
* On architectures with edge-triggered interrupts we must never return
* IRQ_NONE.
*/
#if defined(CONFIG_SA1111) /* ... or other edge-triggered systems */
#define IRQ_NOTMINE IRQ_HANDLED
#else
#define IRQ_NOTMINE IRQ_NONE
#endif
/* Some boards misreport power switching/overcurrent */
static int distrust_firmware = 1;
module_param (distrust_firmware, bool, 0);
MODULE_PARM_DESC (distrust_firmware,
"true to distrust firmware power/overcurrent setup");
/* Some boards leave IR set wrongly, since they fail BIOS/SMM handshakes */
static int no_handshake = 0;
module_param (no_handshake, bool, 0);
MODULE_PARM_DESC (no_handshake, "true (not default) disables BIOS handshake");
/*-------------------------------------------------------------------------*/
/*
* queue up an urb for anything except the root hub
*/
static int ohci_urb_enqueue (
struct usb_hcd *hcd,
struct usb_host_endpoint *ep,
struct urb *urb,
unsigned mem_flags
) {
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
struct ed *ed;
urb_priv_t *urb_priv;
unsigned int pipe = urb->pipe;
int i, size = 0;
unsigned long flags;
int retval = 0;
#ifdef OHCI_VERBOSE_DEBUG
urb_print (urb, "SUB", usb_pipein (pipe));
#endif
/* every endpoint has a ed, locate and maybe (re)initialize it */
if (! (ed = ed_get (ohci, ep, urb->dev, pipe, urb->interval)))
return -ENOMEM;
/* for the private part of the URB we need the number of TDs (size) */
switch (ed->type) {
case PIPE_CONTROL:
/* td_submit_urb() doesn't yet handle these */
if (urb->transfer_buffer_length > 4096)
return -EMSGSIZE;
/* 1 TD for setup, 1 for ACK, plus ... */
size = 2;
/* FALLTHROUGH */
// case PIPE_INTERRUPT:
// case PIPE_BULK:
default:
/* one TD for every 4096 Bytes (can be upto 8K) */
size += urb->transfer_buffer_length / 4096;
/* ... and for any remaining bytes ... */
if ((urb->transfer_buffer_length % 4096) != 0)
size++;
/* ... and maybe a zero length packet to wrap it up */
if (size == 0)
size++;
else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0
&& (urb->transfer_buffer_length
% usb_maxpacket (urb->dev, pipe,
usb_pipeout (pipe))) == 0)
size++;
break;
case PIPE_ISOCHRONOUS: /* number of packets from URB */
size = urb->number_of_packets;
break;
}
/* allocate the private part of the URB */
urb_priv = kmalloc (sizeof (urb_priv_t) + size * sizeof (struct td *),
mem_flags);
if (!urb_priv)
return -ENOMEM;
memset (urb_priv, 0, sizeof (urb_priv_t) + size * sizeof (struct td *));
INIT_LIST_HEAD (&urb_priv->pending);
urb_priv->length = size;
urb_priv->ed = ed;
/* allocate the TDs (deferring hash chain updates) */
for (i = 0; i < size; i++) {
urb_priv->td [i] = td_alloc (ohci, mem_flags);
if (!urb_priv->td [i]) {
urb_priv->length = i;
urb_free_priv (ohci, urb_priv);
return -ENOMEM;
}
}
spin_lock_irqsave (&ohci->lock, flags);
/* don't submit to a dead HC */
if (!HC_IS_RUNNING(hcd->state)) {
retval = -ENODEV;
goto fail;
}
/* in case of unlink-during-submit */
spin_lock (&urb->lock);
if (urb->status != -EINPROGRESS) {
spin_unlock (&urb->lock);
urb->hcpriv = urb_priv;
finish_urb (ohci, urb, NULL);
retval = 0;
goto fail;
}
/* schedule the ed if needed */
if (ed->state == ED_IDLE) {
retval = ed_schedule (ohci, ed);
if (retval < 0)
goto fail0;
if (ed->type == PIPE_ISOCHRONOUS) {
u16 frame = ohci_frame_no(ohci);
/* delay a few frames before the first TD */
frame += max_t (u16, 8, ed->interval);
frame &= ~(ed->interval - 1);
frame |= ed->branch;
urb->start_frame = frame;
/* yes, only URB_ISO_ASAP is supported, and
* urb->start_frame is never used as input.
*/
}
} else if (ed->type == PIPE_ISOCHRONOUS)
urb->start_frame = ed->last_iso + ed->interval;
/* fill the TDs and link them to the ed; and
* enable that part of the schedule, if needed
* and update count of queued periodic urbs
*/
urb->hcpriv = urb_priv;
td_submit_urb (ohci, urb);
fail0:
spin_unlock (&urb->lock);
fail:
if (retval)
urb_free_priv (ohci, urb_priv);
spin_unlock_irqrestore (&ohci->lock, flags);
return retval;
}
/*
* decouple the URB from the HC queues (TDs, urb_priv); it's
* already marked using urb->status. reporting is always done
* asynchronously, and we might be dealing with an urb that's
* partially transferred, or an ED with other urbs being unlinked.
*/
static int ohci_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
unsigned long flags;
#ifdef OHCI_VERBOSE_DEBUG
urb_print (urb, "UNLINK", 1);
#endif
spin_lock_irqsave (&ohci->lock, flags);
if (HC_IS_RUNNING(hcd->state)) {
urb_priv_t *urb_priv;
/* Unless an IRQ completed the unlink while it was being
* handed to us, flag it for unlink and giveback, and force
* some upcoming INTR_SF to call finish_unlinks()
*/
urb_priv = urb->hcpriv;
if (urb_priv) {
if (urb_priv->ed->state == ED_OPER)
start_ed_unlink (ohci, urb_priv->ed);
}
} else {
/*
* with HC dead, we won't respect hc queue pointers
* any more ... just clean up every urb's memory.
*/
if (urb->hcpriv)
finish_urb (ohci, urb, NULL);
}
spin_unlock_irqrestore (&ohci->lock, flags);
return 0;
}
/*-------------------------------------------------------------------------*/
/* frees config/altsetting state for endpoints,
* including ED memory, dummy TD, and bulk/intr data toggle
*/
static void
ohci_endpoint_disable (struct usb_hcd *hcd, struct usb_host_endpoint *ep)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
unsigned long flags;
struct ed *ed = ep->hcpriv;
unsigned limit = 1000;
/* ASSERT: any requests/urbs are being unlinked */
/* ASSERT: nobody can be submitting urbs for this any more */
if (!ed)
return;
rescan:
spin_lock_irqsave (&ohci->lock, flags);
if (!HC_IS_RUNNING (hcd->state)) {
sanitize:
ed->state = ED_IDLE;
finish_unlinks (ohci, 0, NULL);
}
switch (ed->state) {
case ED_UNLINK: /* wait for hw to finish? */
/* major IRQ delivery trouble loses INTR_SF too... */
if (limit-- == 0) {
ohci_warn (ohci, "IRQ INTR_SF lossage\n");
goto sanitize;
}
spin_unlock_irqrestore (&ohci->lock, flags);
schedule_timeout_uninterruptible(1);
goto rescan;
case ED_IDLE: /* fully unlinked */
if (list_empty (&ed->td_list)) {
td_free (ohci, ed->dummy);
ed_free (ohci, ed);
break;
}
/* else FALL THROUGH */
default:
/* caller was supposed to have unlinked any requests;
* that's not our job. can't recover; must leak ed.
*/
ohci_err (ohci, "leak ed %p (#%02x) state %d%s\n",
ed, ep->desc.bEndpointAddress, ed->state,
list_empty (&ed->td_list) ? "" : " (has tds)");
td_free (ohci, ed->dummy);
break;
}
ep->hcpriv = NULL;
spin_unlock_irqrestore (&ohci->lock, flags);
return;
}
static int ohci_get_frame (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
return ohci_frame_no(ohci);
}
static void ohci_usb_reset (struct ohci_hcd *ohci)
{
ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
ohci->hc_control &= OHCI_CTRL_RWC;
ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
}
/* reboot notifier forcibly disables IRQs and DMA, helping kexec and
* other cases where the next software may expect clean state from the
* "firmware". this is bus-neutral, unlike shutdown() methods.
*/
static int
ohci_reboot (struct notifier_block *block, unsigned long code, void *null)
{
struct ohci_hcd *ohci;
ohci = container_of (block, struct ohci_hcd, reboot_notifier);
ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
ohci_usb_reset (ohci);
/* flush the writes */
(void) ohci_readl (ohci, &ohci->regs->control);
return 0;
}
/*-------------------------------------------------------------------------*
* HC functions
*-------------------------------------------------------------------------*/
/* init memory, and kick BIOS/SMM off */
static int ohci_init (struct ohci_hcd *ohci)
{
int ret;
disable (ohci);
ohci->regs = ohci_to_hcd(ohci)->regs;
ohci->next_statechange = jiffies;
#ifndef IR_DISABLE
/* SMM owns the HC? not for long! */
if (!no_handshake && ohci_readl (ohci,
&ohci->regs->control) & OHCI_CTRL_IR) {
u32 temp;
ohci_dbg (ohci, "USB HC TakeOver from BIOS/SMM\n");
/* this timeout is arbitrary. we make it long, so systems
* depending on usb keyboards may be usable even if the
* BIOS/SMM code seems pretty broken.
*/
temp = 500; /* arbitrary: five seconds */
ohci_writel (ohci, OHCI_INTR_OC, &ohci->regs->intrenable);
ohci_writel (ohci, OHCI_OCR, &ohci->regs->cmdstatus);
while (ohci_readl (ohci, &ohci->regs->control) & OHCI_CTRL_IR) {
msleep (10);
if (--temp == 0) {
ohci_err (ohci, "USB HC takeover failed!"
" (BIOS/SMM bug)\n");
return -EBUSY;
}
}
ohci_usb_reset (ohci);
}
#endif
/* Disable HC interrupts */
ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
// flush the writes
(void) ohci_readl (ohci, &ohci->regs->control);
/* Read the number of ports unless overridden */
if (ohci->num_ports == 0)
ohci->num_ports = roothub_a(ohci) & RH_A_NDP;
if (ohci->hcca)
return 0;
ohci->hcca = dma_alloc_coherent (ohci_to_hcd(ohci)->self.controller,
sizeof *ohci->hcca, &ohci->hcca_dma, 0);
if (!ohci->hcca)
return -ENOMEM;
if ((ret = ohci_mem_init (ohci)) < 0)
ohci_stop (ohci_to_hcd(ohci));
return ret;
}
/*-------------------------------------------------------------------------*/
/* Start an OHCI controller, set the BUS operational
* resets USB and controller
* enable interrupts
*/
static int ohci_run (struct ohci_hcd *ohci)
{
u32 mask, temp;
int first = ohci->fminterval == 0;
disable (ohci);
/* boot firmware should have set this up (5.1.1.3.1) */
if (first) {
temp = ohci_readl (ohci, &ohci->regs->fminterval);
ohci->fminterval = temp & 0x3fff;
if (ohci->fminterval != FI)
ohci_dbg (ohci, "fminterval delta %d\n",
ohci->fminterval - FI);
ohci->fminterval |= FSMP (ohci->fminterval) << 16;
/* also: power/overcurrent flags in roothub.a */
}
/* Reset USB nearly "by the book". RemoteWakeupConnected
* saved if boot firmware (BIOS/SMM/...) told us it's connected
* (for OHCI integrated on mainboard, it normally is)
*/
ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
ohci_dbg (ohci, "resetting from state '%s', control = 0x%x\n",
hcfs2string (ohci->hc_control & OHCI_CTRL_HCFS),
ohci->hc_control);
if (ohci->hc_control & OHCI_CTRL_RWC
&& !(ohci->flags & OHCI_QUIRK_AMD756))
ohci_to_hcd(ohci)->can_wakeup = 1;
switch (ohci->hc_control & OHCI_CTRL_HCFS) {
case OHCI_USB_OPER:
temp = 0;
break;
case OHCI_USB_SUSPEND:
case OHCI_USB_RESUME:
ohci->hc_control &= OHCI_CTRL_RWC;
ohci->hc_control |= OHCI_USB_RESUME;
temp = 10 /* msec wait */;
break;
// case OHCI_USB_RESET:
default:
ohci->hc_control &= OHCI_CTRL_RWC;
ohci->hc_control |= OHCI_USB_RESET;
temp = 50 /* msec wait */;
break;
}
ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
// flush the writes
(void) ohci_readl (ohci, &ohci->regs->control);
msleep(temp);
temp = roothub_a (ohci);
if (!(temp & RH_A_NPS)) {
/* power down each port */
for (temp = 0; temp < ohci->num_ports; temp++)
ohci_writel (ohci, RH_PS_LSDA,
&ohci->regs->roothub.portstatus [temp]);
}
// flush those writes
(void) ohci_readl (ohci, &ohci->regs->control);
memset (ohci->hcca, 0, sizeof (struct ohci_hcca));
/* 2msec timelimit here means no irqs/preempt */
spin_lock_irq (&ohci->lock);
retry:
/* HC Reset requires max 10 us delay */
ohci_writel (ohci, OHCI_HCR, &ohci->regs->cmdstatus);
temp = 30; /* ... allow extra time */
while ((ohci_readl (ohci, &ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
if (--temp == 0) {
spin_unlock_irq (&ohci->lock);
ohci_err (ohci, "USB HC reset timed out!\n");
return -1;
}
udelay (1);
}
/* now we're in the SUSPEND state ... must go OPERATIONAL
* within 2msec else HC enters RESUME
*
* ... but some hardware won't init fmInterval "by the book"
* (SiS, OPTi ...), so reset again instead. SiS doesn't need
* this if we write fmInterval after we're OPERATIONAL.
* Unclear about ALi, ServerWorks, and others ... this could
* easily be a longstanding bug in chip init on Linux.
*/
if (ohci->flags & OHCI_QUIRK_INITRESET) {
ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
// flush those writes
(void) ohci_readl (ohci, &ohci->regs->control);
}
/* Tell the controller where the control and bulk lists are
* The lists are empty now. */
ohci_writel (ohci, 0, &ohci->regs->ed_controlhead);
ohci_writel (ohci, 0, &ohci->regs->ed_bulkhead);
/* a reset clears this */
ohci_writel (ohci, (u32) ohci->hcca_dma, &ohci->regs->hcca);
periodic_reinit (ohci);
/* some OHCI implementations are finicky about how they init.
* bogus values here mean not even enumeration could work.
*/
if ((ohci_readl (ohci, &ohci->regs->fminterval) & 0x3fff0000) == 0
|| !ohci_readl (ohci, &ohci->regs->periodicstart)) {
if (!(ohci->flags & OHCI_QUIRK_INITRESET)) {
ohci->flags |= OHCI_QUIRK_INITRESET;
ohci_dbg (ohci, "enabling initreset quirk\n");
goto retry;
}
spin_unlock_irq (&ohci->lock);
ohci_err (ohci, "init err (%08x %04x)\n",
ohci_readl (ohci, &ohci->regs->fminterval),
ohci_readl (ohci, &ohci->regs->periodicstart));
return -EOVERFLOW;
}
/* start controller operations */
ohci->hc_control &= OHCI_CTRL_RWC;
ohci->hc_control |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
ohci_to_hcd(ohci)->state = HC_STATE_RUNNING;
/* wake on ConnectStatusChange, matching external hubs */
ohci_writel (ohci, RH_HS_DRWE, &ohci->regs->roothub.status);
/* Choose the interrupts we care about now, others later on demand */
mask = OHCI_INTR_INIT;
ohci_writel (ohci, mask, &ohci->regs->intrstatus);
ohci_writel (ohci, mask, &ohci->regs->intrenable);
/* handle root hub init quirks ... */
temp = roothub_a (ohci);
temp &= ~(RH_A_PSM | RH_A_OCPM);
if (ohci->flags & OHCI_QUIRK_SUPERIO) {
/* NSC 87560 and maybe others */
temp |= RH_A_NOCP;
temp &= ~(RH_A_POTPGT | RH_A_NPS);
ohci_writel (ohci, temp, &ohci->regs->roothub.a);
} else if ((ohci->flags & OHCI_QUIRK_AMD756) || distrust_firmware) {
/* hub power always on; required for AMD-756 and some
* Mac platforms. ganged overcurrent reporting, if any.
*/
temp |= RH_A_NPS;
ohci_writel (ohci, temp, &ohci->regs->roothub.a);
}
ohci_writel (ohci, RH_HS_LPSC, &ohci->regs->roothub.status);
ohci_writel (ohci, (temp & RH_A_NPS) ? 0 : RH_B_PPCM,
&ohci->regs->roothub.b);
// flush those writes
(void) ohci_readl (ohci, &ohci->regs->control);
spin_unlock_irq (&ohci->lock);
// POTPGT delay is bits 24-31, in 2 ms units.
mdelay ((temp >> 23) & 0x1fe);
ohci_to_hcd(ohci)->state = HC_STATE_RUNNING;
ohci_dump (ohci, 1);
if (ohci_to_hcd(ohci)->self.root_hub == NULL) {
register_reboot_notifier (&ohci->reboot_notifier);
create_debug_files (ohci);
}
return 0;
}
/*-------------------------------------------------------------------------*/
/* an interrupt happens */
static irqreturn_t ohci_irq (struct usb_hcd *hcd, struct pt_regs *ptregs)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
struct ohci_regs __iomem *regs = ohci->regs;
int ints;
/* we can eliminate a (slow) ohci_readl()
if _only_ WDH caused this irq */
if ((ohci->hcca->done_head != 0)
&& ! (hc32_to_cpup (ohci, &ohci->hcca->done_head)
& 0x01)) {
ints = OHCI_INTR_WDH;
/* cardbus/... hardware gone before remove() */
} else if ((ints = ohci_readl (ohci, &regs->intrstatus)) == ~(u32)0) {
disable (ohci);
ohci_dbg (ohci, "device removed!\n");
return IRQ_HANDLED;
/* interrupt for some other device? */
} else if ((ints &= ohci_readl (ohci, &regs->intrenable)) == 0) {
return IRQ_NOTMINE;
}
if (ints & OHCI_INTR_UE) {
disable (ohci);
ohci_err (ohci, "OHCI Unrecoverable Error, disabled\n");
// e.g. due to PCI Master/Target Abort
ohci_dump (ohci, 1);
ohci_usb_reset (ohci);
}
if (ints & OHCI_INTR_RD) {
ohci_vdbg (ohci, "resume detect\n");
ohci_writel (ohci, OHCI_INTR_RD, &regs->intrstatus);
if (hcd->state != HC_STATE_QUIESCING)
schedule_work(&ohci->rh_resume);
}
if (ints & OHCI_INTR_WDH) {
if (HC_IS_RUNNING(hcd->state))
ohci_writel (ohci, OHCI_INTR_WDH, &regs->intrdisable);
spin_lock (&ohci->lock);
dl_done_list (ohci, ptregs);
spin_unlock (&ohci->lock);
if (HC_IS_RUNNING(hcd->state))
ohci_writel (ohci, OHCI_INTR_WDH, &regs->intrenable);
}
/* could track INTR_SO to reduce available PCI/... bandwidth */
/* handle any pending URB/ED unlinks, leaving INTR_SF enabled
* when there's still unlinking to be done (next frame).
*/
spin_lock (&ohci->lock);
if (ohci->ed_rm_list)
finish_unlinks (ohci, ohci_frame_no(ohci), ptregs);
if ((ints & OHCI_INTR_SF) != 0 && !ohci->ed_rm_list
&& HC_IS_RUNNING(hcd->state))
ohci_writel (ohci, OHCI_INTR_SF, &regs->intrdisable);
spin_unlock (&ohci->lock);
if (HC_IS_RUNNING(hcd->state)) {
ohci_writel (ohci, ints, &regs->intrstatus);
ohci_writel (ohci, OHCI_INTR_MIE, &regs->intrenable);
// flush those writes
(void) ohci_readl (ohci, &ohci->regs->control);
}
return IRQ_HANDLED;
}
/*-------------------------------------------------------------------------*/
static void ohci_stop (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
ohci_dbg (ohci, "stop %s controller (state 0x%02x)\n",
hcfs2string (ohci->hc_control & OHCI_CTRL_HCFS),
hcd->state);
ohci_dump (ohci, 1);
flush_scheduled_work();
ohci_usb_reset (ohci);
ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
remove_debug_files (ohci);
unregister_reboot_notifier (&ohci->reboot_notifier);
ohci_mem_cleanup (ohci);
if (ohci->hcca) {
dma_free_coherent (hcd->self.controller,
sizeof *ohci->hcca,
ohci->hcca, ohci->hcca_dma);
ohci->hcca = NULL;
ohci->hcca_dma = 0;
}
}
/*-------------------------------------------------------------------------*/
/* must not be called from interrupt context */
#if defined(CONFIG_USB_SUSPEND) || defined(CONFIG_PM)
static int ohci_restart (struct ohci_hcd *ohci)
{
int temp;
int i;
struct urb_priv *priv;
struct usb_device *root = ohci_to_hcd(ohci)->self.root_hub;
/* mark any devices gone, so they do nothing till khubd disconnects.
* recycle any "live" eds/tds (and urbs) right away.
* later, khubd disconnect processing will recycle the other state,
* (either as disconnect/reconnect, or maybe someday as a reset).
*/
spin_lock_irq(&ohci->lock);
disable (ohci);
for (i = 0; i < root->maxchild; i++) {
if (root->children [i])
usb_set_device_state (root->children[i],
USB_STATE_NOTATTACHED);
}
if (!list_empty (&ohci->pending))
ohci_dbg(ohci, "abort schedule...\n");
list_for_each_entry (priv, &ohci->pending, pending) {
struct urb *urb = priv->td[0]->urb;
struct ed *ed = priv->ed;
switch (ed->state) {
case ED_OPER:
ed->state = ED_UNLINK;
ed->hwINFO |= cpu_to_hc32(ohci, ED_DEQUEUE);
ed_deschedule (ohci, ed);
ed->ed_next = ohci->ed_rm_list;
ed->ed_prev = NULL;
ohci->ed_rm_list = ed;
/* FALLTHROUGH */
case ED_UNLINK:
break;
default:
ohci_dbg(ohci, "bogus ed %p state %d\n",
ed, ed->state);
}
spin_lock (&urb->lock);
urb->status = -ESHUTDOWN;
spin_unlock (&urb->lock);
}
finish_unlinks (ohci, 0, NULL);
spin_unlock_irq(&ohci->lock);
/* paranoia, in case that didn't work: */
/* empty the interrupt branches */
for (i = 0; i < NUM_INTS; i++) ohci->load [i] = 0;
for (i = 0; i < NUM_INTS; i++) ohci->hcca->int_table [i] = 0;
/* no EDs to remove */
ohci->ed_rm_list = NULL;
/* empty control and bulk lists */
ohci->ed_controltail = NULL;
ohci->ed_bulktail = NULL;
if ((temp = ohci_run (ohci)) < 0) {
ohci_err (ohci, "can't restart, %d\n", temp);
return temp;
} else {
/* here we "know" root ports should always stay powered,
* and that if we try to turn them back on the root hub
* will respond to CSC processing.
*/
i = ohci->num_ports;
while (i--)
ohci_writel (ohci, RH_PS_PSS,
&ohci->regs->roothub.portstatus [temp]);
ohci_dbg (ohci, "restart complete\n");
}
return 0;
}
#endif
/*-------------------------------------------------------------------------*/
#define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC
MODULE_AUTHOR (DRIVER_AUTHOR);
MODULE_DESCRIPTION (DRIVER_INFO);
MODULE_LICENSE ("GPL");
#ifdef CONFIG_PCI
#include "ohci-pci.c"
#endif
#ifdef CONFIG_SA1111
#include "ohci-sa1111.c"
#endif
#ifdef CONFIG_ARCH_S3C2410
#include "ohci-s3c2410.c"
#endif
#ifdef CONFIG_ARCH_OMAP
#include "ohci-omap.c"
#endif
#ifdef CONFIG_ARCH_LH7A404
#include "ohci-lh7a404.c"
#endif
#ifdef CONFIG_PXA27x
#include "ohci-pxa27x.c"
#endif
#ifdef CONFIG_SOC_AU1X00
#include "ohci-au1xxx.c"
#endif
#ifdef CONFIG_USB_OHCI_HCD_PPC_SOC
#include "ohci-ppc-soc.c"
#endif
#if !(defined(CONFIG_PCI) \
|| defined(CONFIG_SA1111) \
|| defined(CONFIG_ARCH_S3C2410) \
|| defined(CONFIG_ARCH_OMAP) \
|| defined (CONFIG_ARCH_LH7A404) \
|| defined (CONFIG_PXA27x) \
|| defined (CONFIG_SOC_AU1X00) \
|| defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \
)
#error "missing bus glue for ohci-hcd"
#endif
View Git Blame Copy Permalink