1
linux/arch/arm/mach-omap2/Makefile
Rajendra Nayak 4aef7a2a5a OMAP: clockdomain: Arch specific funcs to handle deps
Define the following architecture specific funtions for omap2/3
.clkdm_add_wkdep
.clkdm_del_wkdep
.clkdm_read_wkdep
.clkdm_clear_all_wkdeps
.clkdm_add_sleepdep
.clkdm_del_sleepdep
.clkdm_read_sleepdep
.clkdm_clear_all_sleepdeps

Convert the platform-independent framework to call these functions.
With this also move the clkdm lookups for all wkdep_srcs and
sleepdep_srcs at clkdm_init.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
[paul@pwsan.com: fixed loop termination conditions in omap*_clkdm_clear_all_*();
 thanks to Kevin Hilman for finding and helping fix those bugs; also
 avoid re-resolving clockdomains during init; abstracted out clkdm_dep walk]
Cc: Kevin Hilman <khilman@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-02-25 16:06:47 -07:00

250 lines
8.0 KiB
Makefile

#
# Makefile for the linux kernel.
#
# Common support
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \
common.o gpio.o dma.o wd_timer.o
omap-2-3-common = irq.o sdrc.o
hwmod-common = omap_hwmod.o \
omap_hwmod_common_data.o
clock-common = clock.o clock_common_data.o \
clkt_dpll.o clkt_clksel.o
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common)
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
# SMP support ONLY available for OMAP4
obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
obj-$(CONFIG_LOCAL_TIMERS) += timer-mpu.o
obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o
obj-$(CONFIG_ARCH_OMAP4) += omap44xx-smc.o omap4-common.o
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec)
AFLAGS_omap44xx-smc.o :=-Wa,-march=armv7-a$(plus_sec)
# Functions loaded to SRAM
obj-$(CONFIG_SOC_OMAP2420) += sram242x.o
obj-$(CONFIG_SOC_OMAP2430) += sram243x.o
obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o
AFLAGS_sram242x.o :=-Wa,-march=armv6
AFLAGS_sram243x.o :=-Wa,-march=armv6
AFLAGS_sram34xx.o :=-Wa,-march=armv7-a
# Pin multiplexing
obj-$(CONFIG_SOC_OMAP2420) += mux2420.o
obj-$(CONFIG_SOC_OMAP2430) += mux2430.o
obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o
obj-$(CONFIG_ARCH_OMAP4) += mux44xx.o
# SMS/SDRC
obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
# obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o
# OPP table initialization
ifeq ($(CONFIG_PM_OPP),y)
obj-y += opp.o
obj-$(CONFIG_ARCH_OMAP3) += opp3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += opp4xxx_data.o
endif
# Power Management
ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o pm_bus.o voltage.o
obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o voltage.o \
cpuidle34xx.o pm_bus.o
obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o voltage.o pm_bus.o
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o
obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o
AFLAGS_sleep24xx.o :=-Wa,-march=armv6
AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a
ifeq ($(CONFIG_PM_VERBOSE),y)
CFLAGS_pm_bus.o += -DDEBUG
endif
endif
# PRCM
obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
# XXX The presence of cm2xxx_3xxx.o on the line below is temporary and
# will be removed once the OMAP4 part of the codebase is converted to
# use OMAP4-specific PRCM functions.
obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cminst44xx.o \
cm44xx.o prcm_mpu44xx.o \
prminst44xx.o
# OMAP powerdomain framework
powerdomain-common += powerdomain.o powerdomain-common.o
obj-$(CONFIG_ARCH_OMAP2) += $(powerdomain-common) \
powerdomain2xxx_3xxx.o \
powerdomains2xxx_data.o \
powerdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += $(powerdomain-common) \
powerdomain2xxx_3xxx.o \
powerdomains3xxx_data.o \
powerdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common) \
powerdomain44xx.o \
powerdomains44xx_data.o
# PRCM clockdomain control
obj-$(CONFIG_ARCH_OMAP2) += clockdomain.o \
clockdomain2xxx_3xxx.o \
clockdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += clockdomain.o \
clockdomain2xxx_3xxx.o \
clockdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += clockdomain.o \
clockdomains44xx_data.o
# Clock framework
obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o \
clkt2xxx_sys.o \
clkt2xxx_dpllcore.o \
clkt2xxx_virt_prcm_set.o \
clkt2xxx_apll.o clkt2xxx_osc.o
obj-$(CONFIG_SOC_OMAP2420) += clock2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += clock2430.o clock2430_data.o
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o \
clock34xx.o clkt34xx_dpll3m2.o \
clock3517.o clock36xx.o \
dpll3xxx.o clock3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o \
dpll3xxx.o
# OMAP2 clock rate set data (old "OPP" data)
obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o
# hwmod data
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2430_data.o
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o
# EMU peripherals
obj-$(CONFIG_OMAP3_EMU) += emu.o
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
mailbox_mach-objs := mailbox.o
obj-$(CONFIG_OMAP_IOMMU) += iommu2.o
iommu-$(CONFIG_OMAP_IOMMU) := omap-iommu.o
obj-y += $(iommu-m) $(iommu-y)
i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
obj-y += $(i2c-omap-m) $(i2c-omap-y)
ifneq ($(CONFIG_TIDSPBRIDGE),)
obj-y += dsp.o
endif
# Specific board support
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o \
hsmmc.o
obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \
hsmmc.o
obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o \
hsmmc.o
obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \
board-flash.o \
hsmmc.o
obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o \
hsmmc.o
obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o \
hsmmc.o
obj-$(CONFIG_MACH_OVERO) += board-overo.o \
hsmmc.o
obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \
hsmmc.o
obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \
hsmmc.o
obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \
hsmmc.o \
board-flash.o
obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
obj-$(CONFIG_MACH_NOKIA_RM680) += board-rm680.o \
sdram-nokia.o \
hsmmc.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
sdram-nokia.o \
board-rx51-peripherals.o \
board-rx51-video.o \
hsmmc.o
obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom.o \
board-zoom-peripherals.o \
board-zoom-display.o \
board-flash.o \
hsmmc.o \
board-zoom-debugboard.o
obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom.o \
board-zoom-peripherals.o \
board-zoom-display.o \
board-flash.o \
hsmmc.o \
board-zoom-debugboard.o
obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \
board-zoom-peripherals.o \
board-zoom-display.o \
board-flash.o \
hsmmc.o
obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \
hsmmc.o
obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o
obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \
hsmmc.o
obj-$(CONFIG_MACH_IGEP0030) += board-igep0030.o \
hsmmc.o
obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \
hsmmc.o
obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o \
hsmmc.o \
omap_phy_internal.o
obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o \
hsmmc.o \
omap_phy_internal.o
obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o \
omap_phy_internal.o \
obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o
obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o \
hsmmc.o
obj-$(CONFIG_MACH_TI8168EVM) += board-ti8168evm.o
# Platform specific device init code
usbfs-$(CONFIG_ARCH_OMAP_OTG) := usb-fs.o
obj-y += $(usbfs-m) $(usbfs-y)
obj-y += usb-musb.o
obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
obj-y += usb-ehci.o
onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o
obj-y += $(onenand-m) $(onenand-y)
nand-$(CONFIG_MTD_NAND_OMAP2) := gpmc-nand.o
obj-y += $(nand-m) $(nand-y)
smc91x-$(CONFIG_SMC91X) := gpmc-smc91x.o
obj-y += $(smc91x-m) $(smc91x-y)
smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o
obj-y += $(smsc911x-m) $(smsc911x-y)
obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o