1
linux/include/asm-x86_64/io_apic.h
Kimball Murray e0c1e9bf81 [PATCH] x86_64: avoid IRQ0 ioapic pin collision
The patch addresses a problem with ACPI SCI interrupt entry, which gets
re-used, and the IRQ is assigned to another unrelated device.  The patch
corrects the code such that SCI IRQ is skipped and duplicate entry is
avoided.  Second issue came up with VIA chipset, the problem was caused by
original patch assigning IRQs starting 16 and up.  The VIA chipset uses
4-bit IRQ register for internal interrupt routing, and therefore cannot
handle IRQ numbers assigned to its devices.  The patch corrects this
problem by allowing PCI IRQs below 16.

Cc: len.brown@intel.com

Signed-off by: Natalie Protasevich <Natalie.Protasevich@unisys.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-08 09:34:56 -07:00

224 lines
5.6 KiB
C

#ifndef __ASM_IO_APIC_H
#define __ASM_IO_APIC_H
#include <linux/config.h>
#include <asm/types.h>
#include <asm/mpspec.h>
/*
* Intel IO-APIC support for SMP and UP systems.
*
* Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar
*/
#ifdef CONFIG_X86_IO_APIC
#ifdef CONFIG_PCI_MSI
static inline int use_pci_vector(void) {return 1;}
static inline void disable_edge_ioapic_vector(unsigned int vector) { }
static inline void mask_and_ack_level_ioapic_vector(unsigned int vector) { }
static inline void end_edge_ioapic_vector (unsigned int vector) { }
#define startup_level_ioapic startup_level_ioapic_vector
#define shutdown_level_ioapic mask_IO_APIC_vector
#define enable_level_ioapic unmask_IO_APIC_vector
#define disable_level_ioapic mask_IO_APIC_vector
#define mask_and_ack_level_ioapic mask_and_ack_level_ioapic_vector
#define end_level_ioapic end_level_ioapic_vector
#define set_ioapic_affinity set_ioapic_affinity_vector
#define startup_edge_ioapic startup_edge_ioapic_vector
#define shutdown_edge_ioapic disable_edge_ioapic_vector
#define enable_edge_ioapic unmask_IO_APIC_vector
#define disable_edge_ioapic disable_edge_ioapic_vector
#define ack_edge_ioapic ack_edge_ioapic_vector
#define end_edge_ioapic end_edge_ioapic_vector
#else
static inline int use_pci_vector(void) {return 0;}
static inline void disable_edge_ioapic_irq(unsigned int irq) { }
static inline void mask_and_ack_level_ioapic_irq(unsigned int irq) { }
static inline void end_edge_ioapic_irq (unsigned int irq) { }
#define startup_level_ioapic startup_level_ioapic_irq
#define shutdown_level_ioapic mask_IO_APIC_irq
#define enable_level_ioapic unmask_IO_APIC_irq
#define disable_level_ioapic mask_IO_APIC_irq
#define mask_and_ack_level_ioapic mask_and_ack_level_ioapic_irq
#define end_level_ioapic end_level_ioapic_irq
#define set_ioapic_affinity set_ioapic_affinity_irq
#define startup_edge_ioapic startup_edge_ioapic_irq
#define shutdown_edge_ioapic disable_edge_ioapic_irq
#define enable_edge_ioapic unmask_IO_APIC_irq
#define disable_edge_ioapic disable_edge_ioapic_irq
#define ack_edge_ioapic ack_edge_ioapic_irq
#define end_edge_ioapic end_edge_ioapic_irq
#endif
#define APIC_MISMATCH_DEBUG
#define IO_APIC_BASE(idx) \
((volatile int *)(__fix_to_virt(FIX_IO_APIC_BASE_0 + idx) \
+ (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK)))
/*
* The structure of the IO-APIC:
*/
union IO_APIC_reg_00 {
u32 raw;
struct {
u32 __reserved_2 : 14,
LTS : 1,
delivery_type : 1,
__reserved_1 : 8,
ID : 8;
} __attribute__ ((packed)) bits;
};
union IO_APIC_reg_01 {
u32 raw;
struct {
u32 version : 8,
__reserved_2 : 7,
PRQ : 1,
entries : 8,
__reserved_1 : 8;
} __attribute__ ((packed)) bits;
};
union IO_APIC_reg_02 {
u32 raw;
struct {
u32 __reserved_2 : 24,
arbitration : 4,
__reserved_1 : 4;
} __attribute__ ((packed)) bits;
};
union IO_APIC_reg_03 {
u32 raw;
struct {
u32 boot_DT : 1,
__reserved_1 : 31;
} __attribute__ ((packed)) bits;
};
/*
* # of IO-APICs and # of IRQ routing registers
*/
extern int nr_ioapics;
extern int nr_ioapic_registers[MAX_IO_APICS];
enum ioapic_irq_destination_types {
dest_Fixed = 0,
dest_LowestPrio = 1,
dest_SMI = 2,
dest__reserved_1 = 3,
dest_NMI = 4,
dest_INIT = 5,
dest__reserved_2 = 6,
dest_ExtINT = 7
};
struct IO_APIC_route_entry {
__u32 vector : 8,
delivery_mode : 3, /* 000: FIXED
* 001: lowest prio
* 111: ExtINT
*/
dest_mode : 1, /* 0: physical, 1: logical */
delivery_status : 1,
polarity : 1,
irr : 1,
trigger : 1, /* 0: edge, 1: level */
mask : 1, /* 0: enabled, 1: disabled */
__reserved_2 : 15;
union { struct { __u32
__reserved_1 : 24,
physical_dest : 4,
__reserved_2 : 4;
} physical;
struct { __u32
__reserved_1 : 24,
logical_dest : 8;
} logical;
} dest;
} __attribute__ ((packed));
/*
* MP-BIOS irq configuration table structures:
*/
/* I/O APIC entries */
extern struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
/* # of MP IRQ source entries */
extern int mp_irq_entries;
/* MP IRQ source entries */
extern struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
/* non-0 if default (table-less) MP configuration */
extern int mpc_default_type;
static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
{
*IO_APIC_BASE(apic) = reg;
return *(IO_APIC_BASE(apic)+4);
}
static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
{
*IO_APIC_BASE(apic) = reg;
*(IO_APIC_BASE(apic)+4) = value;
}
/*
* Re-write a value: to be used for read-modify-write
* cycles where the read already set up the index register.
*/
static inline void io_apic_modify(unsigned int apic, unsigned int value)
{
*(IO_APIC_BASE(apic)+4) = value;
}
/*
* Synchronize the IO-APIC and the CPU by doing
* a dummy read from the IO-APIC
*/
static inline void io_apic_sync(unsigned int apic)
{
(void) *(IO_APIC_BASE(apic)+4);
}
/* 1 if "noapic" boot option passed */
extern int skip_ioapic_setup;
/*
* If we use the IO-APIC for IRQ routing, disable automatic
* assignment of PCI IRQ's.
*/
#define io_apic_assign_pci_irqs (mp_irq_entries && !skip_ioapic_setup && io_apic_irqs)
#ifdef CONFIG_ACPI
extern int io_apic_get_version (int ioapic);
extern int io_apic_get_redir_entries (int ioapic);
extern int io_apic_set_pci_routing (int ioapic, int pin, int irq, int, int);
extern int timer_uses_ioapic_pin_0;
#endif
extern int sis_apic_bug; /* dummy */
#else /* !CONFIG_X86_IO_APIC */
#define io_apic_assign_pci_irqs 0
#endif
extern int assign_irq_vector(int irq);
void enable_NMI_through_LVT0 (void * dummy);
extern spinlock_t i8259A_lock;
#endif