kevin/linux
1
Fork 0
Code
4788da268f
linux/arch/arm/plat-omap/common.c
Santosh Shilimkar fbc9be106e omap4: Move SOC specific code from board file 
This patch moves OMAP4 soc specific code from 4430sdp board file.
The change is necessary so that newer board support can be added
with minimal changes. This will be also problematic for
multi-board, multi-omap builds.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-20 11:17:51 -07:00

350 lines
8.5 KiB
C
Raw Blame History

/*
* linux/arch/arm/plat-omap/common.c
*
* Code common to all OMAP machines.
* The file is created by Tony Lindgren <tony@atomide.com>
*
* Copyright (C) 2009 Texas Instruments
* Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/console.h>
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
#include <asm/setup.h>
#include <plat/common.h>
#include <plat/board.h>
#include <plat/control.h>
#include <plat/mux.h>
#include <plat/fpga.h>
#include <plat/serial.h>
#include <plat/clock.h>
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
# include "../mach-omap2/sdrc.h"
#endif
#define NO_LENGTH_CHECK 0xffffffff
struct omap_board_config_kernel *omap_board_config;
int omap_board_config_size;
static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out)
{
struct omap_board_config_kernel *kinfo = NULL;
int i;
/* Try to find the config from the board-specific structures
* in the kernel. */
for (i = 0; i < omap_board_config_size; i++) {
if (omap_board_config[i].tag == tag) {
if (skip == 0) {
kinfo = &omap_board_config[i];
break;
} else {
skip--;
}
}
}
if (kinfo == NULL)
return NULL;
return kinfo->data;
}
const void *__omap_get_config(u16 tag, size_t len, int nr)
{
return get_config(tag, len, nr, NULL);
}
EXPORT_SYMBOL(__omap_get_config);
const void *omap_get_var_config(u16 tag, size_t *len)
{
return get_config(tag, NO_LENGTH_CHECK, 0, len);
}
EXPORT_SYMBOL(omap_get_var_config);
/*
* 32KHz clocksource ... always available, on pretty most chips except
* OMAP 730 and 1510. Other timers could be used as clocksources, with
* higher resolution in free-running counter modes (e.g. 12 MHz xtal),
* but systems won't necessarily want to spend resources that way.
*/
#define OMAP16XX_TIMER_32K_SYNCHRONIZED 0xfffbc410
#if !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX))
#include <linux/clocksource.h>
/*
* offset_32k holds the init time counter value. It is then subtracted
* from every counter read to achieve a counter that counts time from the
* kernel boot (needed for sched_clock()).
*/
static u32 offset_32k __read_mostly;
#ifdef CONFIG_ARCH_OMAP16XX
static cycle_t omap16xx_32k_read(struct clocksource *cs)
{
return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED) - offset_32k;
}
#else
#define omap16xx_32k_read NULL
#endif
#ifdef CONFIG_ARCH_OMAP2420
static cycle_t omap2420_32k_read(struct clocksource *cs)
{
return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10) - offset_32k;
}
#else
#define omap2420_32k_read NULL
#endif
#ifdef CONFIG_ARCH_OMAP2430
static cycle_t omap2430_32k_read(struct clocksource *cs)
{
return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10) - offset_32k;
}
#else
#define omap2430_32k_read NULL
#endif
#ifdef CONFIG_ARCH_OMAP3
static cycle_t omap34xx_32k_read(struct clocksource *cs)
{
return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10) - offset_32k;
}
#else
#define omap34xx_32k_read NULL
#endif
#ifdef CONFIG_ARCH_OMAP4
static cycle_t omap44xx_32k_read(struct clocksource *cs)
{
return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10) - offset_32k;
}
#else
#define omap44xx_32k_read NULL
#endif
/*
* Kernel assumes that sched_clock can be called early but may not have
* things ready yet.
*/
static cycle_t omap_32k_read_dummy(struct clocksource *cs)
{
return 0;
}
static struct clocksource clocksource_32k = {
.name = "32k_counter",
.rating = 250,
.read = omap_32k_read_dummy,
.mask = CLOCKSOURCE_MASK(32),
.shift = 10,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
/*
* Returns current time from boot in nsecs. It's OK for this to wrap
* around for now, as it's just a relative time stamp.
*/
unsigned long long sched_clock(void)
{
return clocksource_cyc2ns(clocksource_32k.read(&clocksource_32k),
clocksource_32k.mult, clocksource_32k.shift);
}
/**
* read_persistent_clock - Return time from a persistent clock.
*
* Reads the time from a source which isn't disabled during PM, the
* 32k sync timer. Convert the cycles elapsed since last read into
* nsecs and adds to a monotonically increasing timespec.
*/
static struct timespec persistent_ts;
static cycles_t cycles, last_cycles;
void read_persistent_clock(struct timespec *ts)
{
unsigned long long nsecs;
cycles_t delta;
struct timespec *tsp = &persistent_ts;
last_cycles = cycles;
cycles = clocksource_32k.read(&clocksource_32k);
delta = cycles - last_cycles;
nsecs = clocksource_cyc2ns(delta,
clocksource_32k.mult, clocksource_32k.shift);
timespec_add_ns(tsp, nsecs);
*ts = *tsp;
}
static int __init omap_init_clocksource_32k(void)
{
static char err[] __initdata = KERN_ERR
"%s: can't register clocksource!\n";
if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
struct clk *sync_32k_ick;
if (cpu_is_omap16xx())
clocksource_32k.read = omap16xx_32k_read;
else if (cpu_is_omap2420())
clocksource_32k.read = omap2420_32k_read;
else if (cpu_is_omap2430())
clocksource_32k.read = omap2430_32k_read;
else if (cpu_is_omap34xx())
clocksource_32k.read = omap34xx_32k_read;
else if (cpu_is_omap44xx())
clocksource_32k.read = omap44xx_32k_read;
else
return -ENODEV;
sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
if (sync_32k_ick)
clk_enable(sync_32k_ick);
clocksource_32k.mult = clocksource_hz2mult(32768,
clocksource_32k.shift);
offset_32k = clocksource_32k.read(&clocksource_32k);
if (clocksource_register(&clocksource_32k))
printk(err, clocksource_32k.name);
}
return 0;
}
arch_initcall(omap_init_clocksource_32k);
#endif /* !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) */
/* Global address base setup code */
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
{
omap2_set_globals_tap(omap2_globals);
omap2_set_globals_sdrc(omap2_globals);
omap2_set_globals_control(omap2_globals);
omap2_set_globals_prcm(omap2_globals);
omap2_set_globals_uart(omap2_globals);
}
#endif
#if defined(CONFIG_ARCH_OMAP2420)
static struct omap_globals omap242x_globals = {
.class = OMAP242X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(0x48014000),
.sdrc = OMAP2420_SDRC_BASE,
.sms = OMAP2420_SMS_BASE,
.ctrl = OMAP2420_CTRL_BASE,
.prm = OMAP2420_PRM_BASE,
.cm = OMAP2420_CM_BASE,
.uart1_phys = OMAP2_UART1_BASE,
.uart2_phys = OMAP2_UART2_BASE,
.uart3_phys = OMAP2_UART3_BASE,
};
void __init omap2_set_globals_242x(void)
{
__omap2_set_globals(&omap242x_globals);
}
#endif
#if defined(CONFIG_ARCH_OMAP2430)
static struct omap_globals omap243x_globals = {
.class = OMAP243X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(0x4900a000),
.sdrc = OMAP243X_SDRC_BASE,
.sms = OMAP243X_SMS_BASE,
.ctrl = OMAP243X_CTRL_BASE,
.prm = OMAP2430_PRM_BASE,
.cm = OMAP2430_CM_BASE,
.uart1_phys = OMAP2_UART1_BASE,
.uart2_phys = OMAP2_UART2_BASE,
.uart3_phys = OMAP2_UART3_BASE,
};
void __init omap2_set_globals_243x(void)
{
__omap2_set_globals(&omap243x_globals);
}
#endif
#if defined(CONFIG_ARCH_OMAP3)
static struct omap_globals omap3_globals = {
.class = OMAP343X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(0x4830A000),
.sdrc = OMAP343X_SDRC_BASE,
.sms = OMAP343X_SMS_BASE,
.ctrl = OMAP343X_CTRL_BASE,
.prm = OMAP3430_PRM_BASE,
.cm = OMAP3430_CM_BASE,
.uart1_phys = OMAP3_UART1_BASE,
.uart2_phys = OMAP3_UART2_BASE,
.uart3_phys = OMAP3_UART3_BASE,
};
void __init omap2_set_globals_343x(void)
{
__omap2_set_globals(&omap3_globals);
}
void __init omap2_set_globals_36xx(void)
{
omap3_globals.uart4_phys = OMAP3_UART4_BASE;
__omap2_set_globals(&omap3_globals);
}
#endif
#if defined(CONFIG_ARCH_OMAP4)
static struct omap_globals omap4_globals = {
.class = OMAP443X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
.ctrl = OMAP443X_CTRL_BASE,
.prm = OMAP4430_PRM_BASE,
.cm = OMAP4430_CM_BASE,
.cm2 = OMAP4430_CM2_BASE,
.uart1_phys = OMAP4_UART1_BASE,
.uart2_phys = OMAP4_UART2_BASE,
.uart3_phys = OMAP4_UART3_BASE,
.uart4_phys = OMAP4_UART4_BASE,
};
void __init omap2_set_globals_443x(void)
{
omap2_set_globals_tap(&omap4_globals);
omap2_set_globals_control(&omap4_globals);
omap2_set_globals_prcm(&omap4_globals);
omap2_set_globals_uart(&omap4_globals);
}
#endif
View Git Blame Copy Permalink