910321ea81
Please revert 2.6.36-rc commit d2997b1042
"hibernation: freeze swap at hibernation". It complicated matters by
adding a second swap allocation path, just for hibernation; without in any
way fixing the issue that it was intended to address - page reclaim after
fixing the hibernation image might free swap from a page already imaged as
swapcache, letting its swap be reallocated to store a different page of
the image: resulting in data corruption if the imaged page were freed as
clean then swapped back in. Pages freed to si->swap_map were still in
danger of being reallocated by the alternative allocation path.
I guess it inadvertently fixed slow SSD swap allocation for hibernation,
as reported by Nigel Cunningham: by missing out the discards that occur on
the usual swap allocation path; but that was unintentional, and needs a
separate fix.
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Ondrej Zary <linux@rainbow-software.org>
Cc: Andrea Gelmini <andrea.gelmini@gmail.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Nigel Cunningham <nigel@tuxonice.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
690 lines
16 KiB
C
690 lines
16 KiB
C
/*
|
|
* linux/kernel/power/swap.c
|
|
*
|
|
* This file provides functions for reading the suspend image from
|
|
* and writing it to a swap partition.
|
|
*
|
|
* Copyright (C) 1998,2001-2005 Pavel Machek <pavel@ucw.cz>
|
|
* Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl>
|
|
*
|
|
* This file is released under the GPLv2.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/file.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/genhd.h>
|
|
#include <linux/device.h>
|
|
#include <linux/buffer_head.h>
|
|
#include <linux/bio.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/swap.h>
|
|
#include <linux/swapops.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "power.h"
|
|
|
|
#define SWSUSP_SIG "S1SUSPEND"
|
|
|
|
/*
|
|
* The swap map is a data structure used for keeping track of each page
|
|
* written to a swap partition. It consists of many swap_map_page
|
|
* structures that contain each an array of MAP_PAGE_ENTRIES swap entries.
|
|
* These structures are stored on the swap and linked together with the
|
|
* help of the .next_swap member.
|
|
*
|
|
* The swap map is created during suspend. The swap map pages are
|
|
* allocated and populated one at a time, so we only need one memory
|
|
* page to set up the entire structure.
|
|
*
|
|
* During resume we also only need to use one swap_map_page structure
|
|
* at a time.
|
|
*/
|
|
|
|
#define MAP_PAGE_ENTRIES (PAGE_SIZE / sizeof(sector_t) - 1)
|
|
|
|
struct swap_map_page {
|
|
sector_t entries[MAP_PAGE_ENTRIES];
|
|
sector_t next_swap;
|
|
};
|
|
|
|
/**
|
|
* The swap_map_handle structure is used for handling swap in
|
|
* a file-alike way
|
|
*/
|
|
|
|
struct swap_map_handle {
|
|
struct swap_map_page *cur;
|
|
sector_t cur_swap;
|
|
sector_t first_sector;
|
|
unsigned int k;
|
|
};
|
|
|
|
struct swsusp_header {
|
|
char reserved[PAGE_SIZE - 20 - sizeof(sector_t) - sizeof(int)];
|
|
sector_t image;
|
|
unsigned int flags; /* Flags to pass to the "boot" kernel */
|
|
char orig_sig[10];
|
|
char sig[10];
|
|
} __attribute__((packed));
|
|
|
|
static struct swsusp_header *swsusp_header;
|
|
|
|
/**
|
|
* The following functions are used for tracing the allocated
|
|
* swap pages, so that they can be freed in case of an error.
|
|
*/
|
|
|
|
struct swsusp_extent {
|
|
struct rb_node node;
|
|
unsigned long start;
|
|
unsigned long end;
|
|
};
|
|
|
|
static struct rb_root swsusp_extents = RB_ROOT;
|
|
|
|
static int swsusp_extents_insert(unsigned long swap_offset)
|
|
{
|
|
struct rb_node **new = &(swsusp_extents.rb_node);
|
|
struct rb_node *parent = NULL;
|
|
struct swsusp_extent *ext;
|
|
|
|
/* Figure out where to put the new node */
|
|
while (*new) {
|
|
ext = container_of(*new, struct swsusp_extent, node);
|
|
parent = *new;
|
|
if (swap_offset < ext->start) {
|
|
/* Try to merge */
|
|
if (swap_offset == ext->start - 1) {
|
|
ext->start--;
|
|
return 0;
|
|
}
|
|
new = &((*new)->rb_left);
|
|
} else if (swap_offset > ext->end) {
|
|
/* Try to merge */
|
|
if (swap_offset == ext->end + 1) {
|
|
ext->end++;
|
|
return 0;
|
|
}
|
|
new = &((*new)->rb_right);
|
|
} else {
|
|
/* It already is in the tree */
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
/* Add the new node and rebalance the tree. */
|
|
ext = kzalloc(sizeof(struct swsusp_extent), GFP_KERNEL);
|
|
if (!ext)
|
|
return -ENOMEM;
|
|
|
|
ext->start = swap_offset;
|
|
ext->end = swap_offset;
|
|
rb_link_node(&ext->node, parent, new);
|
|
rb_insert_color(&ext->node, &swsusp_extents);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* alloc_swapdev_block - allocate a swap page and register that it has
|
|
* been allocated, so that it can be freed in case of an error.
|
|
*/
|
|
|
|
sector_t alloc_swapdev_block(int swap)
|
|
{
|
|
unsigned long offset;
|
|
|
|
offset = swp_offset(get_swap_page_of_type(swap));
|
|
if (offset) {
|
|
if (swsusp_extents_insert(offset))
|
|
swap_free(swp_entry(swap, offset));
|
|
else
|
|
return swapdev_block(swap, offset);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* free_all_swap_pages - free swap pages allocated for saving image data.
|
|
* It also frees the extents used to register which swap entries had been
|
|
* allocated.
|
|
*/
|
|
|
|
void free_all_swap_pages(int swap)
|
|
{
|
|
struct rb_node *node;
|
|
|
|
while ((node = swsusp_extents.rb_node)) {
|
|
struct swsusp_extent *ext;
|
|
unsigned long offset;
|
|
|
|
ext = container_of(node, struct swsusp_extent, node);
|
|
rb_erase(node, &swsusp_extents);
|
|
for (offset = ext->start; offset <= ext->end; offset++)
|
|
swap_free(swp_entry(swap, offset));
|
|
|
|
kfree(ext);
|
|
}
|
|
}
|
|
|
|
int swsusp_swap_in_use(void)
|
|
{
|
|
return (swsusp_extents.rb_node != NULL);
|
|
}
|
|
|
|
/*
|
|
* General things
|
|
*/
|
|
|
|
static unsigned short root_swap = 0xffff;
|
|
struct block_device *hib_resume_bdev;
|
|
|
|
/*
|
|
* Saving part
|
|
*/
|
|
|
|
static int mark_swapfiles(struct swap_map_handle *handle, unsigned int flags)
|
|
{
|
|
int error;
|
|
|
|
hib_bio_read_page(swsusp_resume_block, swsusp_header, NULL);
|
|
if (!memcmp("SWAP-SPACE",swsusp_header->sig, 10) ||
|
|
!memcmp("SWAPSPACE2",swsusp_header->sig, 10)) {
|
|
memcpy(swsusp_header->orig_sig,swsusp_header->sig, 10);
|
|
memcpy(swsusp_header->sig,SWSUSP_SIG, 10);
|
|
swsusp_header->image = handle->first_sector;
|
|
swsusp_header->flags = flags;
|
|
error = hib_bio_write_page(swsusp_resume_block,
|
|
swsusp_header, NULL);
|
|
} else {
|
|
printk(KERN_ERR "PM: Swap header not found!\n");
|
|
error = -ENODEV;
|
|
}
|
|
return error;
|
|
}
|
|
|
|
/**
|
|
* swsusp_swap_check - check if the resume device is a swap device
|
|
* and get its index (if so)
|
|
*
|
|
* This is called before saving image
|
|
*/
|
|
static int swsusp_swap_check(void)
|
|
{
|
|
int res;
|
|
|
|
res = swap_type_of(swsusp_resume_device, swsusp_resume_block,
|
|
&hib_resume_bdev);
|
|
if (res < 0)
|
|
return res;
|
|
|
|
root_swap = res;
|
|
res = blkdev_get(hib_resume_bdev, FMODE_WRITE);
|
|
if (res)
|
|
return res;
|
|
|
|
res = set_blocksize(hib_resume_bdev, PAGE_SIZE);
|
|
if (res < 0)
|
|
blkdev_put(hib_resume_bdev, FMODE_WRITE);
|
|
|
|
return res;
|
|
}
|
|
|
|
/**
|
|
* write_page - Write one page to given swap location.
|
|
* @buf: Address we're writing.
|
|
* @offset: Offset of the swap page we're writing to.
|
|
* @bio_chain: Link the next write BIO here
|
|
*/
|
|
|
|
static int write_page(void *buf, sector_t offset, struct bio **bio_chain)
|
|
{
|
|
void *src;
|
|
|
|
if (!offset)
|
|
return -ENOSPC;
|
|
|
|
if (bio_chain) {
|
|
src = (void *)__get_free_page(__GFP_WAIT | __GFP_HIGH);
|
|
if (src) {
|
|
memcpy(src, buf, PAGE_SIZE);
|
|
} else {
|
|
WARN_ON_ONCE(1);
|
|
bio_chain = NULL; /* Go synchronous */
|
|
src = buf;
|
|
}
|
|
} else {
|
|
src = buf;
|
|
}
|
|
return hib_bio_write_page(offset, src, bio_chain);
|
|
}
|
|
|
|
static void release_swap_writer(struct swap_map_handle *handle)
|
|
{
|
|
if (handle->cur)
|
|
free_page((unsigned long)handle->cur);
|
|
handle->cur = NULL;
|
|
}
|
|
|
|
static int get_swap_writer(struct swap_map_handle *handle)
|
|
{
|
|
int ret;
|
|
|
|
ret = swsusp_swap_check();
|
|
if (ret) {
|
|
if (ret != -ENOSPC)
|
|
printk(KERN_ERR "PM: Cannot find swap device, try "
|
|
"swapon -a.\n");
|
|
return ret;
|
|
}
|
|
handle->cur = (struct swap_map_page *)get_zeroed_page(GFP_KERNEL);
|
|
if (!handle->cur) {
|
|
ret = -ENOMEM;
|
|
goto err_close;
|
|
}
|
|
handle->cur_swap = alloc_swapdev_block(root_swap);
|
|
if (!handle->cur_swap) {
|
|
ret = -ENOSPC;
|
|
goto err_rel;
|
|
}
|
|
handle->k = 0;
|
|
handle->first_sector = handle->cur_swap;
|
|
return 0;
|
|
err_rel:
|
|
release_swap_writer(handle);
|
|
err_close:
|
|
swsusp_close(FMODE_WRITE);
|
|
return ret;
|
|
}
|
|
|
|
static int swap_write_page(struct swap_map_handle *handle, void *buf,
|
|
struct bio **bio_chain)
|
|
{
|
|
int error = 0;
|
|
sector_t offset;
|
|
|
|
if (!handle->cur)
|
|
return -EINVAL;
|
|
offset = alloc_swapdev_block(root_swap);
|
|
error = write_page(buf, offset, bio_chain);
|
|
if (error)
|
|
return error;
|
|
handle->cur->entries[handle->k++] = offset;
|
|
if (handle->k >= MAP_PAGE_ENTRIES) {
|
|
error = hib_wait_on_bio_chain(bio_chain);
|
|
if (error)
|
|
goto out;
|
|
offset = alloc_swapdev_block(root_swap);
|
|
if (!offset)
|
|
return -ENOSPC;
|
|
handle->cur->next_swap = offset;
|
|
error = write_page(handle->cur, handle->cur_swap, NULL);
|
|
if (error)
|
|
goto out;
|
|
memset(handle->cur, 0, PAGE_SIZE);
|
|
handle->cur_swap = offset;
|
|
handle->k = 0;
|
|
}
|
|
out:
|
|
return error;
|
|
}
|
|
|
|
static int flush_swap_writer(struct swap_map_handle *handle)
|
|
{
|
|
if (handle->cur && handle->cur_swap)
|
|
return write_page(handle->cur, handle->cur_swap, NULL);
|
|
else
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int swap_writer_finish(struct swap_map_handle *handle,
|
|
unsigned int flags, int error)
|
|
{
|
|
if (!error) {
|
|
flush_swap_writer(handle);
|
|
printk(KERN_INFO "PM: S");
|
|
error = mark_swapfiles(handle, flags);
|
|
printk("|\n");
|
|
}
|
|
|
|
if (error)
|
|
free_all_swap_pages(root_swap);
|
|
release_swap_writer(handle);
|
|
swsusp_close(FMODE_WRITE);
|
|
|
|
return error;
|
|
}
|
|
|
|
/**
|
|
* save_image - save the suspend image data
|
|
*/
|
|
|
|
static int save_image(struct swap_map_handle *handle,
|
|
struct snapshot_handle *snapshot,
|
|
unsigned int nr_to_write)
|
|
{
|
|
unsigned int m;
|
|
int ret;
|
|
int nr_pages;
|
|
int err2;
|
|
struct bio *bio;
|
|
struct timeval start;
|
|
struct timeval stop;
|
|
|
|
printk(KERN_INFO "PM: Saving image data pages (%u pages) ... ",
|
|
nr_to_write);
|
|
m = nr_to_write / 100;
|
|
if (!m)
|
|
m = 1;
|
|
nr_pages = 0;
|
|
bio = NULL;
|
|
do_gettimeofday(&start);
|
|
while (1) {
|
|
ret = snapshot_read_next(snapshot);
|
|
if (ret <= 0)
|
|
break;
|
|
ret = swap_write_page(handle, data_of(*snapshot), &bio);
|
|
if (ret)
|
|
break;
|
|
if (!(nr_pages % m))
|
|
printk(KERN_CONT "\b\b\b\b%3d%%", nr_pages / m);
|
|
nr_pages++;
|
|
}
|
|
err2 = hib_wait_on_bio_chain(&bio);
|
|
do_gettimeofday(&stop);
|
|
if (!ret)
|
|
ret = err2;
|
|
if (!ret)
|
|
printk(KERN_CONT "\b\b\b\bdone\n");
|
|
else
|
|
printk(KERN_CONT "\n");
|
|
swsusp_show_speed(&start, &stop, nr_to_write, "Wrote");
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* enough_swap - Make sure we have enough swap to save the image.
|
|
*
|
|
* Returns TRUE or FALSE after checking the total amount of swap
|
|
* space avaiable from the resume partition.
|
|
*/
|
|
|
|
static int enough_swap(unsigned int nr_pages)
|
|
{
|
|
unsigned int free_swap = count_swap_pages(root_swap, 1);
|
|
|
|
pr_debug("PM: Free swap pages: %u\n", free_swap);
|
|
return free_swap > nr_pages + PAGES_FOR_IO;
|
|
}
|
|
|
|
/**
|
|
* swsusp_write - Write entire image and metadata.
|
|
* @flags: flags to pass to the "boot" kernel in the image header
|
|
*
|
|
* It is important _NOT_ to umount filesystems at this point. We want
|
|
* them synced (in case something goes wrong) but we DO not want to mark
|
|
* filesystem clean: it is not. (And it does not matter, if we resume
|
|
* correctly, we'll mark system clean, anyway.)
|
|
*/
|
|
|
|
int swsusp_write(unsigned int flags)
|
|
{
|
|
struct swap_map_handle handle;
|
|
struct snapshot_handle snapshot;
|
|
struct swsusp_info *header;
|
|
unsigned long pages;
|
|
int error;
|
|
|
|
pages = snapshot_get_image_size();
|
|
error = get_swap_writer(&handle);
|
|
if (error) {
|
|
printk(KERN_ERR "PM: Cannot get swap writer\n");
|
|
return error;
|
|
}
|
|
if (!enough_swap(pages)) {
|
|
printk(KERN_ERR "PM: Not enough free swap\n");
|
|
error = -ENOSPC;
|
|
goto out_finish;
|
|
}
|
|
memset(&snapshot, 0, sizeof(struct snapshot_handle));
|
|
error = snapshot_read_next(&snapshot);
|
|
if (error < PAGE_SIZE) {
|
|
if (error >= 0)
|
|
error = -EFAULT;
|
|
|
|
goto out_finish;
|
|
}
|
|
header = (struct swsusp_info *)data_of(snapshot);
|
|
error = swap_write_page(&handle, header, NULL);
|
|
if (!error)
|
|
error = save_image(&handle, &snapshot, pages - 1);
|
|
out_finish:
|
|
error = swap_writer_finish(&handle, flags, error);
|
|
return error;
|
|
}
|
|
|
|
/**
|
|
* The following functions allow us to read data using a swap map
|
|
* in a file-alike way
|
|
*/
|
|
|
|
static void release_swap_reader(struct swap_map_handle *handle)
|
|
{
|
|
if (handle->cur)
|
|
free_page((unsigned long)handle->cur);
|
|
handle->cur = NULL;
|
|
}
|
|
|
|
static int get_swap_reader(struct swap_map_handle *handle,
|
|
unsigned int *flags_p)
|
|
{
|
|
int error;
|
|
|
|
*flags_p = swsusp_header->flags;
|
|
|
|
if (!swsusp_header->image) /* how can this happen? */
|
|
return -EINVAL;
|
|
|
|
handle->cur = (struct swap_map_page *)get_zeroed_page(__GFP_WAIT | __GFP_HIGH);
|
|
if (!handle->cur)
|
|
return -ENOMEM;
|
|
|
|
error = hib_bio_read_page(swsusp_header->image, handle->cur, NULL);
|
|
if (error) {
|
|
release_swap_reader(handle);
|
|
return error;
|
|
}
|
|
handle->k = 0;
|
|
return 0;
|
|
}
|
|
|
|
static int swap_read_page(struct swap_map_handle *handle, void *buf,
|
|
struct bio **bio_chain)
|
|
{
|
|
sector_t offset;
|
|
int error;
|
|
|
|
if (!handle->cur)
|
|
return -EINVAL;
|
|
offset = handle->cur->entries[handle->k];
|
|
if (!offset)
|
|
return -EFAULT;
|
|
error = hib_bio_read_page(offset, buf, bio_chain);
|
|
if (error)
|
|
return error;
|
|
if (++handle->k >= MAP_PAGE_ENTRIES) {
|
|
error = hib_wait_on_bio_chain(bio_chain);
|
|
handle->k = 0;
|
|
offset = handle->cur->next_swap;
|
|
if (!offset)
|
|
release_swap_reader(handle);
|
|
else if (!error)
|
|
error = hib_bio_read_page(offset, handle->cur, NULL);
|
|
}
|
|
return error;
|
|
}
|
|
|
|
static int swap_reader_finish(struct swap_map_handle *handle)
|
|
{
|
|
release_swap_reader(handle);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* load_image - load the image using the swap map handle
|
|
* @handle and the snapshot handle @snapshot
|
|
* (assume there are @nr_pages pages to load)
|
|
*/
|
|
|
|
static int load_image(struct swap_map_handle *handle,
|
|
struct snapshot_handle *snapshot,
|
|
unsigned int nr_to_read)
|
|
{
|
|
unsigned int m;
|
|
int error = 0;
|
|
struct timeval start;
|
|
struct timeval stop;
|
|
struct bio *bio;
|
|
int err2;
|
|
unsigned nr_pages;
|
|
|
|
printk(KERN_INFO "PM: Loading image data pages (%u pages) ... ",
|
|
nr_to_read);
|
|
m = nr_to_read / 100;
|
|
if (!m)
|
|
m = 1;
|
|
nr_pages = 0;
|
|
bio = NULL;
|
|
do_gettimeofday(&start);
|
|
for ( ; ; ) {
|
|
error = snapshot_write_next(snapshot);
|
|
if (error <= 0)
|
|
break;
|
|
error = swap_read_page(handle, data_of(*snapshot), &bio);
|
|
if (error)
|
|
break;
|
|
if (snapshot->sync_read)
|
|
error = hib_wait_on_bio_chain(&bio);
|
|
if (error)
|
|
break;
|
|
if (!(nr_pages % m))
|
|
printk("\b\b\b\b%3d%%", nr_pages / m);
|
|
nr_pages++;
|
|
}
|
|
err2 = hib_wait_on_bio_chain(&bio);
|
|
do_gettimeofday(&stop);
|
|
if (!error)
|
|
error = err2;
|
|
if (!error) {
|
|
printk("\b\b\b\bdone\n");
|
|
snapshot_write_finalize(snapshot);
|
|
if (!snapshot_image_loaded(snapshot))
|
|
error = -ENODATA;
|
|
} else
|
|
printk("\n");
|
|
swsusp_show_speed(&start, &stop, nr_to_read, "Read");
|
|
return error;
|
|
}
|
|
|
|
/**
|
|
* swsusp_read - read the hibernation image.
|
|
* @flags_p: flags passed by the "frozen" kernel in the image header should
|
|
* be written into this memeory location
|
|
*/
|
|
|
|
int swsusp_read(unsigned int *flags_p)
|
|
{
|
|
int error;
|
|
struct swap_map_handle handle;
|
|
struct snapshot_handle snapshot;
|
|
struct swsusp_info *header;
|
|
|
|
memset(&snapshot, 0, sizeof(struct snapshot_handle));
|
|
error = snapshot_write_next(&snapshot);
|
|
if (error < PAGE_SIZE)
|
|
return error < 0 ? error : -EFAULT;
|
|
header = (struct swsusp_info *)data_of(snapshot);
|
|
error = get_swap_reader(&handle, flags_p);
|
|
if (error)
|
|
goto end;
|
|
if (!error)
|
|
error = swap_read_page(&handle, header, NULL);
|
|
if (!error)
|
|
error = load_image(&handle, &snapshot, header->pages - 1);
|
|
swap_reader_finish(&handle);
|
|
end:
|
|
if (!error)
|
|
pr_debug("PM: Image successfully loaded\n");
|
|
else
|
|
pr_debug("PM: Error %d resuming\n", error);
|
|
return error;
|
|
}
|
|
|
|
/**
|
|
* swsusp_check - Check for swsusp signature in the resume device
|
|
*/
|
|
|
|
int swsusp_check(void)
|
|
{
|
|
int error;
|
|
|
|
hib_resume_bdev = open_by_devnum(swsusp_resume_device, FMODE_READ);
|
|
if (!IS_ERR(hib_resume_bdev)) {
|
|
set_blocksize(hib_resume_bdev, PAGE_SIZE);
|
|
memset(swsusp_header, 0, PAGE_SIZE);
|
|
error = hib_bio_read_page(swsusp_resume_block,
|
|
swsusp_header, NULL);
|
|
if (error)
|
|
goto put;
|
|
|
|
if (!memcmp(SWSUSP_SIG, swsusp_header->sig, 10)) {
|
|
memcpy(swsusp_header->sig, swsusp_header->orig_sig, 10);
|
|
/* Reset swap signature now */
|
|
error = hib_bio_write_page(swsusp_resume_block,
|
|
swsusp_header, NULL);
|
|
} else {
|
|
error = -EINVAL;
|
|
}
|
|
|
|
put:
|
|
if (error)
|
|
blkdev_put(hib_resume_bdev, FMODE_READ);
|
|
else
|
|
pr_debug("PM: Signature found, resuming\n");
|
|
} else {
|
|
error = PTR_ERR(hib_resume_bdev);
|
|
}
|
|
|
|
if (error)
|
|
pr_debug("PM: Error %d checking image file\n", error);
|
|
|
|
return error;
|
|
}
|
|
|
|
/**
|
|
* swsusp_close - close swap device.
|
|
*/
|
|
|
|
void swsusp_close(fmode_t mode)
|
|
{
|
|
if (IS_ERR(hib_resume_bdev)) {
|
|
pr_debug("PM: Image device not initialised\n");
|
|
return;
|
|
}
|
|
|
|
blkdev_put(hib_resume_bdev, mode);
|
|
}
|
|
|
|
static int swsusp_header_init(void)
|
|
{
|
|
swsusp_header = (struct swsusp_header*) __get_free_page(GFP_KERNEL);
|
|
if (!swsusp_header)
|
|
panic("Could not allocate memory for swsusp_header\n");
|
|
return 0;
|
|
}
|
|
|
|
core_initcall(swsusp_header_init);
|