b497549a03
The S3C2410 serial driver in drivers/serial/s3c2410.c has been growing bigger with the addition of more variants of this hardware with the growing Samsung SoCs range. As such, it would be easier to split this code up into a core and per-cpu drivers to make driver addition easier, and the core smaller. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
152 lines
3.6 KiB
C
152 lines
3.6 KiB
C
/* linux/drivers/serial/s3c2412.c
|
|
*
|
|
* Driver for Samsung S3C2412 and S3C2413 SoC onboard UARTs.
|
|
*
|
|
* Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
|
|
* http://armlinux.simtec.co.uk/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/io.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/init.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/serial.h>
|
|
|
|
#include <asm/irq.h>
|
|
#include <asm/hardware.h>
|
|
|
|
#include <asm/plat-s3c/regs-serial.h>
|
|
#include <asm/arch/regs-gpio.h>
|
|
|
|
#include "samsung.h"
|
|
|
|
static int s3c2412_serial_setsource(struct uart_port *port,
|
|
struct s3c24xx_uart_clksrc *clk)
|
|
{
|
|
unsigned long ucon = rd_regl(port, S3C2410_UCON);
|
|
|
|
ucon &= ~S3C2412_UCON_CLKMASK;
|
|
|
|
if (strcmp(clk->name, "uclk") == 0)
|
|
ucon |= S3C2440_UCON_UCLK;
|
|
else if (strcmp(clk->name, "pclk") == 0)
|
|
ucon |= S3C2440_UCON_PCLK;
|
|
else if (strcmp(clk->name, "usysclk") == 0)
|
|
ucon |= S3C2412_UCON_USYSCLK;
|
|
else {
|
|
printk(KERN_ERR "unknown clock source %s\n", clk->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
wr_regl(port, S3C2410_UCON, ucon);
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int s3c2412_serial_getsource(struct uart_port *port,
|
|
struct s3c24xx_uart_clksrc *clk)
|
|
{
|
|
unsigned long ucon = rd_regl(port, S3C2410_UCON);
|
|
|
|
switch (ucon & S3C2412_UCON_CLKMASK) {
|
|
case S3C2412_UCON_UCLK:
|
|
clk->divisor = 1;
|
|
clk->name = "uclk";
|
|
break;
|
|
|
|
case S3C2412_UCON_PCLK:
|
|
case S3C2412_UCON_PCLK2:
|
|
clk->divisor = 1;
|
|
clk->name = "pclk";
|
|
break;
|
|
|
|
case S3C2412_UCON_USYSCLK:
|
|
clk->divisor = 1;
|
|
clk->name = "usysclk";
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s3c2412_serial_resetport(struct uart_port *port,
|
|
struct s3c2410_uartcfg *cfg)
|
|
{
|
|
unsigned long ucon = rd_regl(port, S3C2410_UCON);
|
|
|
|
dbg("%s: port=%p (%08lx), cfg=%p\n",
|
|
__func__, port, port->mapbase, cfg);
|
|
|
|
/* ensure we don't change the clock settings... */
|
|
|
|
ucon &= S3C2412_UCON_CLKMASK;
|
|
|
|
wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
|
|
wr_regl(port, S3C2410_ULCON, cfg->ulcon);
|
|
|
|
/* reset both fifos */
|
|
|
|
wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
|
|
wr_regl(port, S3C2410_UFCON, cfg->ufcon);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct s3c24xx_uart_info s3c2412_uart_inf = {
|
|
.name = "Samsung S3C2412 UART",
|
|
.type = PORT_S3C2412,
|
|
.fifosize = 64,
|
|
.rx_fifomask = S3C2440_UFSTAT_RXMASK,
|
|
.rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
|
|
.rx_fifofull = S3C2440_UFSTAT_RXFULL,
|
|
.tx_fifofull = S3C2440_UFSTAT_TXFULL,
|
|
.tx_fifomask = S3C2440_UFSTAT_TXMASK,
|
|
.tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
|
|
.get_clksrc = s3c2412_serial_getsource,
|
|
.set_clksrc = s3c2412_serial_setsource,
|
|
.reset_port = s3c2412_serial_resetport,
|
|
};
|
|
|
|
/* device management */
|
|
|
|
static int s3c2412_serial_probe(struct platform_device *dev)
|
|
{
|
|
dbg("s3c2440_serial_probe: dev=%p\n", dev);
|
|
return s3c24xx_serial_probe(dev, &s3c2412_uart_inf);
|
|
}
|
|
|
|
static struct platform_driver s3c2412_serial_drv = {
|
|
.probe = s3c2412_serial_probe,
|
|
.remove = s3c24xx_serial_remove,
|
|
.driver = {
|
|
.name = "s3c2412-uart",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
s3c24xx_console_init(&s3c2412_serial_drv, &s3c2412_uart_inf);
|
|
|
|
static inline int s3c2412_serial_init(void)
|
|
{
|
|
return s3c24xx_serial_init(&s3c2412_serial_drv, &s3c2412_uart_inf);
|
|
}
|
|
|
|
static inline void s3c2412_serial_exit(void)
|
|
{
|
|
platform_driver_unregister(&s3c2412_serial_drv);
|
|
}
|
|
|
|
module_init(s3c2412_serial_init);
|
|
module_exit(s3c2412_serial_exit);
|
|
|
|
MODULE_DESCRIPTION("Samsung S3C2412,S3C2413 SoC Serial port driver");
|
|
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:s3c2412-uart");
|