kevin/linux
1
Fork 0
Code
3c6bb07ac1
linux/arch/xtensa/kernel/coprocessor.S
Chris Zankel 173d668138 [PATCH] xtensa: remove extra header files 
The Xtensa port contained many header files that were never needed.  This
rather lengthy patch removes all those files.  Unfortunately, there were
many dependencies that needed to be updated, so this patch touches quite a
few source files.

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:55:39 -08:00

201 lines
5.5 KiB
ArmAsm
Raw Blame History

/*
* arch/xtensa/kernel/coprocessor.S
*
* Xtensa processor configuration-specific table of coprocessor and
* other custom register layout information.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2003 - 2005 Tensilica Inc.
*
* Marc Gauthier <marc@tensilica.com> <marc@alumni.uwaterloo.ca>
*/
/*
* This module contains a table that describes the layout of the various
* custom registers and states associated with each coprocessor, as well
* as those not associated with any coprocessor ("extra state").
* This table is included with core dumps and is available via the ptrace
* interface, allowing the layout of such register/state information to
* be modified in the kernel without affecting the debugger. Each
* register or state is identified using a 32-bit "libdb target number"
* assigned when the Xtensa processor is generated.
*/
#include <linux/linkage.h>
#include <asm/processor.h>
#if XCHAL_HAVE_CP
#define CP_LAST ((XCHAL_CP_MAX - 1) * COPROCESSOR_INFO_SIZE)
ENTRY(release_coprocessors)
entry a1, 16
# a2: task
movi a3, 1 << XCHAL_CP_MAX # a3: coprocessor-bit
movi a4, coprocessor_info+CP_LAST # a4: owner-table
# a5: tmp
movi a6, 0 # a6: 0
rsil a7, LOCKLEVEL # a7: PS
1: /* Check if task is coprocessor owner of coprocessor[i]. */
l32i a5, a4, COPROCESSOR_INFO_OWNER
srli a3, a3, 1
beqz a3, 1f
addi a4, a4, -8
beq a2, a5, 1b
/* Found an entry: Clear entry CPENABLE bit to disable CP. */
rsr a5, CPENABLE
s32i a6, a4, COPROCESSOR_INFO_OWNER
xor a5, a3, a5
wsr a5, CPENABLE
bnez a3, 1b
1: wsr a7, PS
rsync
retw
ENTRY(disable_coprocessor)
entry sp, 16
rsil a7, LOCKLEVEL
rsr a3, CPENABLE
movi a4, 1
ssl a2
sll a4, a4
and a4, a3, a4
xor a3, a3, a4
wsr a3, CPENABLE
wsr a7, PS
rsync
retw
ENTRY(enable_coprocessor)
entry sp, 16
rsil a7, LOCKLEVEL
rsr a3, CPENABLE
movi a4, 1
ssl a2
sll a4, a4
or a3, a3, a4
wsr a3, CPENABLE
wsr a7, PS
rsync
retw
ENTRY(save_coprocessor_extra)
entry sp, 16
xchal_extra_store_funcbody
retw
ENTRY(restore_coprocessor_extra)
entry sp, 16
xchal_extra_load_funcbody
retw
ENTRY(save_coprocessor_registers)
entry sp, 16
xchal_cpi_store_funcbody
retw
ENTRY(restore_coprocessor_registers)
entry sp, 16
xchal_cpi_load_funcbody
retw
/*
* The Xtensa compile-time HAL (core.h) XCHAL_*_SA_CONTENTS_LIBDB macros
* describe the contents of coprocessor & extra save areas in terms of
* undefined CONTENTS_LIBDB_{SREG,UREG,REGF} macros. We define these
* latter macros here; they expand into a table of the format we want.
* The general format is:
*
* CONTENTS_LIBDB_SREG(libdbnum, offset, size, align, rsv1, name, sregnum,
* bitmask, rsv2, rsv3)
* CONTENTS_LIBDB_UREG(libdbnum, offset, size, align, rsv1, name, uregnum,
* bitmask, rsv2, rsv3)
* CONTENTS_LIBDB_REGF(libdbnum, offset, size, align, rsv1, name, index,
* numentries, contentsize, regname_base,
* regfile_name, rsv2, rsv3)
*
* For this table, we only care about the <libdbnum>, <offset> and <size>
* fields.
*/
/* Map all XCHAL CONTENTS macros to the reg_entry asm macro defined below: */
#define CONTENTS_LIBDB_SREG(libdbnum,offset,size,align,rsv1,name,sregnum, \
bitmask, rsv2, rsv3) \
reg_entry libdbnum, offset, size ;
#define CONTENTS_LIBDB_UREG(libdbnum,offset,size,align,rsv1,name,uregnum, \
bitmask, rsv2, rsv3) \
reg_entry libdbnum, offset, size ;
#define CONTENTS_LIBDB_REGF(libdbnum, offset, size, align, rsv1, name, index, \
numentries, contentsize, regname_base, \
regfile_name, rsv2, rsv3) \
reg_entry libdbnum, offset, size ;
/* A single table entry: */
.macro reg_entry libdbnum, offset, size
.ifne (__last_offset-(__last_group_offset+\offset))
/* padding entry */
.word (0xFC000000+__last_offset-(__last_group_offset+\offset))
.endif
.word \libdbnum /* actual entry */
.set __last_offset, __last_group_offset+\offset+\size
.endm /* reg_entry */
/* Table entry that marks the beginning of a group (coprocessor or "extra"): */
.macro reg_group cpnum, num_entries, align
.set __last_group_offset, (__last_offset + \align- 1) & -\align
.ifne \num_entries
.word 0xFD000000+(\cpnum<<16)+\num_entries
.endif
.endm /* reg_group */
/*
* Register info tables.
*/
.section .rodata, "a"
.globl _xtensa_reginfo_tables
.globl _xtensa_reginfo_table_size
.align 4
_xtensa_reginfo_table_size:
.word _xtensa_reginfo_table_end - _xtensa_reginfo_tables
_xtensa_reginfo_tables:
.set __last_offset, 0
reg_group 0xFF, XCHAL_EXTRA_SA_CONTENTS_LIBDB_NUM, XCHAL_EXTRA_SA_ALIGN
XCHAL_EXTRA_SA_CONTENTS_LIBDB
reg_group 0, XCHAL_CP0_SA_CONTENTS_LIBDB_NUM, XCHAL_CP0_SA_ALIGN
XCHAL_CP0_SA_CONTENTS_LIBDB
reg_group 1, XCHAL_CP1_SA_CONTENTS_LIBDB_NUM, XCHAL_CP1_SA_ALIGN
XCHAL_CP1_SA_CONTENTS_LIBDB
reg_group 2, XCHAL_CP2_SA_CONTENTS_LIBDB_NUM, XCHAL_CP2_SA_ALIGN
XCHAL_CP2_SA_CONTENTS_LIBDB
reg_group 3, XCHAL_CP3_SA_CONTENTS_LIBDB_NUM, XCHAL_CP3_SA_ALIGN
XCHAL_CP3_SA_CONTENTS_LIBDB
reg_group 4, XCHAL_CP4_SA_CONTENTS_LIBDB_NUM, XCHAL_CP4_SA_ALIGN
XCHAL_CP4_SA_CONTENTS_LIBDB
reg_group 5, XCHAL_CP5_SA_CONTENTS_LIBDB_NUM, XCHAL_CP5_SA_ALIGN
XCHAL_CP5_SA_CONTENTS_LIBDB
reg_group 6, XCHAL_CP6_SA_CONTENTS_LIBDB_NUM, XCHAL_CP6_SA_ALIGN
XCHAL_CP6_SA_CONTENTS_LIBDB
reg_group 7, XCHAL_CP7_SA_CONTENTS_LIBDB_NUM, XCHAL_CP7_SA_ALIGN
XCHAL_CP7_SA_CONTENTS_LIBDB
.word 0xFC000000 /* invalid register number,marks end of table*/
_xtensa_reginfo_table_end:
#endif
View Git Blame Copy Permalink