kevin/linux
1
Fork 0
Code
3b212db921
linux/drivers/ide/pci/it8172.c
Herbert Xu a380a8849f [PATCH] ide: hotplug mark __devinit it8172.c 
From: Herbert Xu <herbert@gondor.apana.org.au>

mark the __init section __devinit.
Splitted up from the Debian kernel patch.

Signed-off-by: maximilian attems <janitor@sternwelten.at>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
2005-07-03 16:28:44 +02:00

309 lines
8.4 KiB
C
Raw Blame History

/*
*
* BRIEF MODULE DESCRIPTION
* IT8172 IDE controller support
*
* Copyright 2000 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* stevel@mvista.com or source@mvista.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <linux/pci.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <asm/io.h>
#include <asm/it8172/it8172_int.h>
/*
* Prototypes
*/
static u8 it8172_ratemask (ide_drive_t *drive)
{
return 1;
}
static void it8172_tune_drive (ide_drive_t *drive, u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
int is_slave = (&hwif->drives[1] == drive);
unsigned long flags;
u16 drive_enables;
u32 drive_timing;
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
spin_lock_irqsave(&ide_lock, flags);
pci_read_config_word(dev, 0x40, &drive_enables);
pci_read_config_dword(dev, 0x44, &drive_timing);
/*
* FIX! The DIOR/DIOW pulse width and recovery times in port 0x44
* are being left at the default values of 8 PCI clocks (242 nsec
* for a 33 MHz clock). These can be safely shortened at higher
* PIO modes. The DIOR/DIOW pulse width and recovery times only
* apply to PIO modes, not to the DMA modes.
*/
/*
* Enable port 0x44. The IT8172G spec is confused; it calls
* this register the "Slave IDE Timing Register", but in fact,
* it controls timing for both master and slave drives.
*/
drive_enables |= 0x4000;
if (is_slave) {
drive_enables &= 0xc006;
if (pio > 1)
/* enable prefetch and IORDY sample-point */
drive_enables |= 0x0060;
} else {
drive_enables &= 0xc060;
if (pio > 1)
/* enable prefetch and IORDY sample-point */
drive_enables |= 0x0006;
}
pci_write_config_word(dev, 0x40, drive_enables);
spin_unlock_irqrestore(&ide_lock, flags);
}
static u8 it8172_dma_2_pio (u8 xfer_rate)
{
switch(xfer_rate) {
case XFER_UDMA_5:
case XFER_UDMA_4:
case XFER_UDMA_3:
case XFER_UDMA_2:
case XFER_UDMA_1:
case XFER_UDMA_0:
case XFER_MW_DMA_2:
case XFER_PIO_4:
return 4;
case XFER_MW_DMA_1:
case XFER_PIO_3:
return 3;
case XFER_SW_DMA_2:
case XFER_PIO_2:
return 2;
case XFER_MW_DMA_0:
case XFER_SW_DMA_1:
case XFER_SW_DMA_0:
case XFER_PIO_1:
case XFER_PIO_0:
case XFER_PIO_SLOW:
default:
return 0;
}
}
static int it8172_tune_chipset (ide_drive_t *drive, u8 xferspeed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u8 speed = ide_rate_filter(it8172_ratemask(drive), xferspeed);
int a_speed = 3 << (drive->dn * 4);
int u_flag = 1 << drive->dn;
int u_speed = 0;
u8 reg48, reg4a;
pci_read_config_byte(dev, 0x48, &reg48);
pci_read_config_byte(dev, 0x4a, &reg4a);
/*
* Setting the DMA cycle time to 2 or 3 PCI clocks (60 and 91 nsec
* at 33 MHz PCI clock) seems to cause BadCRC errors during DMA
* transfers on some drives, even though both numbers meet the minimum
* ATAPI-4 spec of 73 and 54 nsec for UDMA 1 and 2 respectively.
* So the faster times are just commented out here. The good news is
* that the slower cycle time has very little affect on transfer
* performance.
*/
switch(speed) {
case XFER_UDMA_4:
case XFER_UDMA_2: //u_speed = 2 << (drive->dn * 4); break;
case XFER_UDMA_5:
case XFER_UDMA_3:
case XFER_UDMA_1: //u_speed = 1 << (drive->dn * 4); break;
case XFER_UDMA_0: u_speed = 0 << (drive->dn * 4); break;
case XFER_MW_DMA_2:
case XFER_MW_DMA_1:
case XFER_MW_DMA_0:
case XFER_SW_DMA_2: break;
case XFER_PIO_4:
case XFER_PIO_3:
case XFER_PIO_2:
case XFER_PIO_0: break;
default: return -1;
}
if (speed >= XFER_UDMA_0) {
pci_write_config_byte(dev, 0x48, reg48 | u_flag);
reg4a &= ~a_speed;
pci_write_config_byte(dev, 0x4a, reg4a | u_speed);
} else {
pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
pci_write_config_byte(dev, 0x4a, reg4a & ~a_speed);
}
it8172_tune_drive(drive, it8172_dma_2_pio(speed));
return (ide_config_drive_speed(drive, speed));
}
static int it8172_config_chipset_for_dma (ide_drive_t *drive)
{
u8 speed = ide_dma_speed(drive, it8172_ratemask(drive));
if (!(speed)) {
u8 tspeed = ide_get_best_pio_mode(drive, 255, 4, NULL);
speed = it8172_dma_2_pio(XFER_PIO_0 + tspeed);
}
(void) it8172_tune_chipset(drive, speed);
return ide_dma_enable(drive);
}
static int it8172_config_drive_xfer_rate (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct hd_driveid *id = drive->id;
drive->init_speed = 0;
if (id && (id->capability & 1) && drive->autodma) {
if (ide_use_dma(drive)) {
if (it8172_config_chipset_for_dma(drive))
return hwif->ide_dma_on(drive);
}
goto fast_ata_pio;
} else if ((id->capability & 8) || (id->field_valid & 2)) {
fast_ata_pio:
it8172_tune_drive(drive, 5);
return hwif->ide_dma_off_quietly(drive);
}
/* IORDY not supported */
return 0;
}
static unsigned int __devinit init_chipset_it8172 (struct pci_dev *dev, const char *name)
{
unsigned char progif;
/*
* Place both IDE interfaces into PCI "native" mode
*/
pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
pci_write_config_byte(dev, PCI_CLASS_PROG, progif | 0x05);
return IT8172_IDE_IRQ;
}
static void __devinit init_hwif_it8172 (ide_hwif_t *hwif)
{
struct pci_dev* dev = hwif->pci_dev;
unsigned long cmdBase, ctrlBase;
hwif->autodma = 0;
hwif->tuneproc = &it8172_tune_drive;
hwif->speedproc = &it8172_tune_chipset;
cmdBase = dev->resource[0].start;
ctrlBase = dev->resource[1].start;
ide_init_hwif_ports(&hwif->hw, cmdBase, ctrlBase | 2, NULL);
memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->io_ports));
hwif->noprobe = 0;
if (!hwif->dma_base) {
hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1;
return;
}
hwif->atapi_dma = 1;
hwif->ultra_mask = 0x07;
hwif->mwdma_mask = 0x06;
hwif->swdma_mask = 0x04;
hwif->ide_dma_check = &it8172_config_drive_xfer_rate;
if (!noautodma)
hwif->autodma = 1;
hwif->drives[0].autodma = hwif->autodma;
hwif->drives[1].autodma = hwif->autodma;
}
static ide_pci_device_t it8172_chipsets[] __devinitdata = {
{ /* 0 */
.name = "IT8172G",
.init_chipset = init_chipset_it8172,
.init_hwif = init_hwif_it8172,
.channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x00,0x00,0x00}, {0x40,0x00,0x01}},
.bootable = ON_BOARD,
}
};
static int __devinit it8172_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
if ((!(PCI_FUNC(dev->devfn) & 1) ||
(!((dev->class >> 8) == PCI_CLASS_STORAGE_IDE))))
return -ENODEV; /* IT8172 is more than an IDE controller */
return ide_setup_pci_device(dev, &it8172_chipsets[id->driver_data]);
}
static struct pci_device_id it8172_pci_tbl[] = {
{ PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_IT8172G, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ 0, },
};
MODULE_DEVICE_TABLE(pci, it8172_pci_tbl);
static struct pci_driver driver = {
.name = "IT8172_IDE",
.id_table = it8172_pci_tbl,
.probe = it8172_init_one,
};
static int it8172_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
module_init(it8172_ide_init);
MODULE_AUTHOR("SteveL@mvista.com");
MODULE_DESCRIPTION("PCI driver module for ITE 8172 IDE");
MODULE_LICENSE("GPL");
View Git Blame Copy Permalink