1
linux/drivers/acpi/acpica/nspredef.c
Bob Moore 3a58176e4f ACPICA: Remove messages if predefined repair(s) are successful
Repair mechanism was considered too wordy. Now, messages are only
unconditionally emitted if the return object cannot be repaired.
Existing messages for successful repairs were converted to
ACPI_DEBUG_PRINT messages for now. ACPICA BZ 827.

http://www.acpica.org/bugzilla/show_bug.cgi?id=827

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-15 17:29:36 -05:00

1139 lines
33 KiB
C

/******************************************************************************
*
* Module Name: nspredef - Validation of ACPI predefined methods and objects
* $Revision: 1.1 $
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2008, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#define ACPI_CREATE_PREDEFINED_TABLE
#include <acpi/acpi.h>
#include "accommon.h"
#include "acnamesp.h"
#include "acpredef.h"
#define _COMPONENT ACPI_NAMESPACE
ACPI_MODULE_NAME("nspredef")
/*******************************************************************************
*
* This module validates predefined ACPI objects that appear in the namespace,
* at the time they are evaluated (via acpi_evaluate_object). The purpose of this
* validation is to detect problems with BIOS-exposed predefined ACPI objects
* before the results are returned to the ACPI-related drivers.
*
* There are several areas that are validated:
*
* 1) The number of input arguments as defined by the method/object in the
* ASL is validated against the ACPI specification.
* 2) The type of the return object (if any) is validated against the ACPI
* specification.
* 3) For returned package objects, the count of package elements is
* validated, as well as the type of each package element. Nested
* packages are supported.
*
* For any problems found, a warning message is issued.
*
******************************************************************************/
/* Local prototypes */
static acpi_status
acpi_ns_check_package(struct acpi_predefined_data *data,
union acpi_operand_object **return_object_ptr);
static acpi_status
acpi_ns_check_package_list(struct acpi_predefined_data *data,
const union acpi_predefined_info *package,
union acpi_operand_object **elements, u32 count);
static acpi_status
acpi_ns_check_package_elements(struct acpi_predefined_data *data,
union acpi_operand_object **elements,
u8 type1,
u32 count1,
u8 type2, u32 count2, u32 start_index);
static acpi_status
acpi_ns_check_object_type(struct acpi_predefined_data *data,
union acpi_operand_object **return_object_ptr,
u32 expected_btypes, u32 package_index);
static acpi_status
acpi_ns_check_reference(struct acpi_predefined_data *data,
union acpi_operand_object *return_object);
static void acpi_ns_get_expected_types(char *buffer, u32 expected_btypes);
/*
* Names for the types that can be returned by the predefined objects.
* Used for warning messages. Must be in the same order as the ACPI_RTYPEs
*/
static const char *acpi_rtype_names[] = {
"/Integer",
"/String",
"/Buffer",
"/Package",
"/Reference",
};
/*******************************************************************************
*
* FUNCTION: acpi_ns_check_predefined_names
*
* PARAMETERS: Node - Namespace node for the method/object
* user_param_count - Number of parameters actually passed
* return_status - Status from the object evaluation
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
*
* RETURN: Status
*
* DESCRIPTION: Check an ACPI name for a match in the predefined name list.
*
******************************************************************************/
acpi_status
acpi_ns_check_predefined_names(struct acpi_namespace_node *node,
u32 user_param_count,
acpi_status return_status,
union acpi_operand_object **return_object_ptr)
{
union acpi_operand_object *return_object = *return_object_ptr;
acpi_status status = AE_OK;
const union acpi_predefined_info *predefined;
char *pathname;
struct acpi_predefined_data *data;
/* Match the name for this method/object against the predefined list */
predefined = acpi_ns_check_for_predefined_name(node);
/* Get the full pathname to the object, for use in warning messages */
pathname = acpi_ns_get_external_pathname(node);
if (!pathname) {
return AE_OK; /* Could not get pathname, ignore */
}
/*
* Check that the parameter count for this method matches the ASL
* definition. For predefined names, ensure that both the caller and
* the method itself are in accordance with the ACPI specification.
*/
acpi_ns_check_parameter_count(pathname, node, user_param_count,
predefined);
/* If not a predefined name, we cannot validate the return object */
if (!predefined) {
goto cleanup;
}
/*
* If the method failed or did not actually return an object, we cannot
* validate the return object
*/
if ((return_status != AE_OK) && (return_status != AE_CTRL_RETURN_VALUE)) {
goto cleanup;
}
/*
* If there is no return value, check if we require a return value for
* this predefined name. Either one return value is expected, or none,
* for both methods and other objects.
*
* Exit now if there is no return object. Warning if one was expected.
*/
if (!return_object) {
if ((predefined->info.expected_btypes) &&
(!(predefined->info.expected_btypes & ACPI_RTYPE_NONE))) {
ACPI_WARN_PREDEFINED((AE_INFO, pathname,
ACPI_WARN_ALWAYS,
"Missing expected return value"));
status = AE_AML_NO_RETURN_VALUE;
}
goto cleanup;
}
/*
* 1) We have a return value, but if one wasn't expected, just exit, this is
* not a problem. For example, if the "Implicit Return" feature is
* enabled, methods will always return a value.
*
* 2) If the return value can be of any type, then we cannot perform any
* validation, exit.
*/
if ((!predefined->info.expected_btypes) ||
(predefined->info.expected_btypes == ACPI_RTYPE_ALL)) {
goto cleanup;
}
/* Create the parameter data block for object validation */
data = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_predefined_data));
if (!data) {
goto cleanup;
}
data->predefined = predefined;
data->node_flags = node->flags;
data->pathname = pathname;
/* TBD: For variable-length Packages, remove NULL elements here */
/*
* Check that the type of the return object is what is expected for
* this predefined name
*/
status = acpi_ns_check_object_type(data, return_object_ptr,
predefined->info.expected_btypes,
ACPI_NOT_PACKAGE_ELEMENT);
if (ACPI_SUCCESS(status)) {
/*
* For returned Package objects, check the type of all sub-objects.
* Note: Package may have been created by call above.
*/
if ((*return_object_ptr)->common.type == ACPI_TYPE_PACKAGE) {
status = acpi_ns_check_package(data, return_object_ptr);
}
}
/*
* Perform additional, more complicated repairs on a per-name
* basis. Do this regardless of the status from above.
*/
status = acpi_ns_complex_repairs(data, node, status, return_object_ptr);
/*
* If the object validation failed or if we successfully repaired one
* or more objects, mark the parent node to suppress further warning
* messages during the next evaluation of the same method/object.
*/
if (ACPI_FAILURE(status) || (data->flags & ACPI_OBJECT_REPAIRED)) {
node->flags |= ANOBJ_EVALUATED;
}
ACPI_FREE(data);
cleanup:
ACPI_FREE(pathname);
return (status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ns_check_parameter_count
*
* PARAMETERS: Pathname - Full pathname to the node (for error msgs)
* Node - Namespace node for the method/object
* user_param_count - Number of args passed in by the caller
* Predefined - Pointer to entry in predefined name table
*
* RETURN: None
*
* DESCRIPTION: Check that the declared (in ASL/AML) parameter count for a
* predefined name is what is expected (i.e., what is defined in
* the ACPI specification for this predefined name.)
*
******************************************************************************/
void
acpi_ns_check_parameter_count(char *pathname,
struct acpi_namespace_node *node,
u32 user_param_count,
const union acpi_predefined_info *predefined)
{
u32 param_count;
u32 required_params_current;
u32 required_params_old;
/* Methods have 0-7 parameters. All other types have zero. */
param_count = 0;
if (node->type == ACPI_TYPE_METHOD) {
param_count = node->object->method.param_count;
}
if (!predefined) {
/*
* Check the parameter count for non-predefined methods/objects.
*
* Warning if too few or too many arguments have been passed by the
* caller. An incorrect number of arguments may not cause the method
* to fail. However, the method will fail if there are too few
* arguments and the method attempts to use one of the missing ones.
*/
if (user_param_count < param_count) {
ACPI_WARN_PREDEFINED((AE_INFO, pathname,
ACPI_WARN_ALWAYS,
"Insufficient arguments - needs %u, found %u",
param_count, user_param_count));
} else if (user_param_count > param_count) {
ACPI_WARN_PREDEFINED((AE_INFO, pathname,
ACPI_WARN_ALWAYS,
"Excess arguments - needs %u, found %u",
param_count, user_param_count));
}
return;
}
/*
* Validate the user-supplied parameter count.
* Allow two different legal argument counts (_SCP, etc.)
*/
required_params_current = predefined->info.param_count & 0x0F;
required_params_old = predefined->info.param_count >> 4;
if (user_param_count != ACPI_UINT32_MAX) {
if ((user_param_count != required_params_current) &&
(user_param_count != required_params_old)) {
ACPI_WARN_PREDEFINED((AE_INFO, pathname,
ACPI_WARN_ALWAYS,
"Parameter count mismatch - "
"caller passed %u, ACPI requires %u",
user_param_count,
required_params_current));
}
}
/*
* Check that the ASL-defined parameter count is what is expected for
* this predefined name (parameter count as defined by the ACPI
* specification)
*/
if ((param_count != required_params_current) &&
(param_count != required_params_old)) {
ACPI_WARN_PREDEFINED((AE_INFO, pathname, node->flags,
"Parameter count mismatch - ASL declared %u, ACPI requires %u",
param_count, required_params_current));
}
}
/*******************************************************************************
*
* FUNCTION: acpi_ns_check_for_predefined_name
*
* PARAMETERS: Node - Namespace node for the method/object
*
* RETURN: Pointer to entry in predefined table. NULL indicates not found.
*
* DESCRIPTION: Check an object name against the predefined object list.
*
******************************************************************************/
const union acpi_predefined_info *acpi_ns_check_for_predefined_name(struct
acpi_namespace_node
*node)
{
const union acpi_predefined_info *this_name;
/* Quick check for a predefined name, first character must be underscore */
if (node->name.ascii[0] != '_') {
return (NULL);
}
/* Search info table for a predefined method/object name */
this_name = predefined_names;
while (this_name->info.name[0]) {
if (ACPI_COMPARE_NAME(node->name.ascii, this_name->info.name)) {
return (this_name);
}
/*
* Skip next entry in the table if this name returns a Package
* (next entry contains the package info)
*/
if (this_name->info.expected_btypes & ACPI_RTYPE_PACKAGE) {
this_name++;
}
this_name++;
}
return (NULL); /* Not found */
}
/*******************************************************************************
*
* FUNCTION: acpi_ns_check_package
*
* PARAMETERS: Data - Pointer to validation data structure
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
*
* RETURN: Status
*
* DESCRIPTION: Check a returned package object for the correct count and
* correct type of all sub-objects.
*
******************************************************************************/
static acpi_status
acpi_ns_check_package(struct acpi_predefined_data *data,
union acpi_operand_object **return_object_ptr)
{
union acpi_operand_object *return_object = *return_object_ptr;
const union acpi_predefined_info *package;
union acpi_operand_object **elements;
acpi_status status = AE_OK;
u32 expected_count;
u32 count;
u32 i;
ACPI_FUNCTION_NAME(ns_check_package);
/* The package info for this name is in the next table entry */
package = data->predefined + 1;
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
"%s Validating return Package of Type %X, Count %X\n",
data->pathname, package->ret_info.type,
return_object->package.count));
/* Extract package count and elements array */
elements = return_object->package.elements;
count = return_object->package.count;
/* The package must have at least one element, else invalid */
if (!count) {
ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
"Return Package has no elements (empty)"));
return (AE_AML_OPERAND_VALUE);
}
/*
* Decode the type of the expected package contents
*
* PTYPE1 packages contain no subpackages
* PTYPE2 packages contain sub-packages
*/
switch (package->ret_info.type) {
case ACPI_PTYPE1_FIXED:
/*
* The package count is fixed and there are no sub-packages
*
* If package is too small, exit.
* If package is larger than expected, issue warning but continue
*/
expected_count =
package->ret_info.count1 + package->ret_info.count2;
if (count < expected_count) {
goto package_too_small;
} else if (count > expected_count) {
ACPI_DEBUG_PRINT((ACPI_DB_REPAIR,
"%s: Return Package is larger than needed - "
"found %u, expected %u\n",
data->pathname, count,
expected_count));
}
/* Validate all elements of the returned package */
status = acpi_ns_check_package_elements(data, elements,
package->ret_info.
object_type1,
package->ret_info.
count1,
package->ret_info.
object_type2,
package->ret_info.
count2, 0);
break;
case ACPI_PTYPE1_VAR:
/*
* The package count is variable, there are no sub-packages, and all
* elements must be of the same type
*/
for (i = 0; i < count; i++) {
status = acpi_ns_check_object_type(data, elements,
package->ret_info.
object_type1, i);
if (ACPI_FAILURE(status)) {
return (status);
}
elements++;
}
break;
case ACPI_PTYPE1_OPTION:
/*
* The package count is variable, there are no sub-packages. There are
* a fixed number of required elements, and a variable number of
* optional elements.
*
* Check if package is at least as large as the minimum required
*/
expected_count = package->ret_info3.count;
if (count < expected_count) {
goto package_too_small;
}
/* Variable number of sub-objects */
for (i = 0; i < count; i++) {
if (i < package->ret_info3.count) {
/* These are the required package elements (0, 1, or 2) */
status =
acpi_ns_check_object_type(data, elements,
package->
ret_info3.
object_type[i],
i);
if (ACPI_FAILURE(status)) {
return (status);
}
} else {
/* These are the optional package elements */
status =
acpi_ns_check_object_type(data, elements,
package->
ret_info3.
tail_object_type,
i);
if (ACPI_FAILURE(status)) {
return (status);
}
}
elements++;
}
break;
case ACPI_PTYPE2_REV_FIXED:
/* First element is the (Integer) revision */
status = acpi_ns_check_object_type(data, elements,
ACPI_RTYPE_INTEGER, 0);
if (ACPI_FAILURE(status)) {
return (status);
}
elements++;
count--;
/* Examine the sub-packages */
status =
acpi_ns_check_package_list(data, package, elements, count);
break;
case ACPI_PTYPE2_PKG_COUNT:
/* First element is the (Integer) count of sub-packages to follow */
status = acpi_ns_check_object_type(data, elements,
ACPI_RTYPE_INTEGER, 0);
if (ACPI_FAILURE(status)) {
return (status);
}
/*
* Count cannot be larger than the parent package length, but allow it
* to be smaller. The >= accounts for the Integer above.
*/
expected_count = (u32) (*elements)->integer.value;
if (expected_count >= count) {
goto package_too_small;
}
count = expected_count;
elements++;
/* Examine the sub-packages */
status =
acpi_ns_check_package_list(data, package, elements, count);
break;
case ACPI_PTYPE2:
case ACPI_PTYPE2_FIXED:
case ACPI_PTYPE2_MIN:
case ACPI_PTYPE2_COUNT:
/*
* These types all return a single Package that consists of a
* variable number of sub-Packages.
*
* First, ensure that the first element is a sub-Package. If not,
* the BIOS may have incorrectly returned the object as a single
* package instead of a Package of Packages (a common error if
* there is only one entry). We may be able to repair this by
* wrapping the returned Package with a new outer Package.
*/
if (*elements
&& ((*elements)->common.type != ACPI_TYPE_PACKAGE)) {
/* Create the new outer package and populate it */
status =
acpi_ns_repair_package_list(data,
return_object_ptr);
if (ACPI_FAILURE(status)) {
return (status);
}
/* Update locals to point to the new package (of 1 element) */
return_object = *return_object_ptr;
elements = return_object->package.elements;
count = 1;
}
/* Examine the sub-packages */
status =
acpi_ns_check_package_list(data, package, elements, count);
break;
default:
/* Should not get here if predefined info table is correct */
ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
"Invalid internal return type in table entry: %X",
package->ret_info.type));
return (AE_AML_INTERNAL);
}
return (status);
package_too_small:
/* Error exit for the case with an incorrect package count */
ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
"Return Package is too small - found %u elements, expected %u",
count, expected_count));
return (AE_AML_OPERAND_VALUE);
}
/*******************************************************************************
*
* FUNCTION: acpi_ns_check_package_list
*
* PARAMETERS: Data - Pointer to validation data structure
* Package - Pointer to package-specific info for method
* Elements - Element list of parent package. All elements
* of this list should be of type Package.
* Count - Count of subpackages
*
* RETURN: Status
*
* DESCRIPTION: Examine a list of subpackages
*
******************************************************************************/
static acpi_status
acpi_ns_check_package_list(struct acpi_predefined_data *data,
const union acpi_predefined_info *package,
union acpi_operand_object **elements, u32 count)
{
union acpi_operand_object *sub_package;
union acpi_operand_object **sub_elements;
acpi_status status;
u8 non_trailing_null = FALSE;
u32 expected_count;
u32 i;
u32 j;
/* Validate each sub-Package in the parent Package */
for (i = 0; i < count; i++) {
/*
* Handling for NULL package elements. For now, we will simply allow
* a parent package with trailing NULL elements. This can happen if
* the package was defined to be longer than the initializer list.
* This is legal as per the ACPI specification. It is often used
* to allow for dynamic initialization of a Package.
*
* A future enhancement may be to simply truncate the package to
* remove the trailing NULL elements.
*/
if (!(*elements)) {
if (!non_trailing_null) {
/* Ensure the remaining elements are all NULL */
for (j = 1; j < (count - i + 1); j++) {
if (elements[j]) {
non_trailing_null = TRUE;
}
}
if (!non_trailing_null) {
/* Ignore the trailing NULL elements */
return (AE_OK);
}
}
/* There are trailing non-null elements, issue warning */
ACPI_WARN_PREDEFINED((AE_INFO, data->pathname,
data->node_flags,
"Found NULL element at package index %u",
i));
elements++;
continue;
}
sub_package = *elements;
sub_elements = sub_package->package.elements;
/* Each sub-object must be of type Package */
status = acpi_ns_check_object_type(data, &sub_package,
ACPI_RTYPE_PACKAGE, i);
if (ACPI_FAILURE(status)) {
return (status);
}
/* Examine the different types of expected sub-packages */
switch (package->ret_info.type) {
case ACPI_PTYPE2:
case ACPI_PTYPE2_PKG_COUNT:
case ACPI_PTYPE2_REV_FIXED:
/* Each subpackage has a fixed number of elements */
expected_count =
package->ret_info.count1 + package->ret_info.count2;
if (sub_package->package.count < expected_count) {
goto package_too_small;
}
status =
acpi_ns_check_package_elements(data, sub_elements,
package->ret_info.
object_type1,
package->ret_info.
count1,
package->ret_info.
object_type2,
package->ret_info.
count2, 0);
if (ACPI_FAILURE(status)) {
return (status);
}
break;
case ACPI_PTYPE2_FIXED:
/* Each sub-package has a fixed length */
expected_count = package->ret_info2.count;
if (sub_package->package.count < expected_count) {
goto package_too_small;
}
/* Check the type of each sub-package element */
for (j = 0; j < expected_count; j++) {
status =
acpi_ns_check_object_type(data,
&sub_elements[j],
package->
ret_info2.
object_type[j],
j);
if (ACPI_FAILURE(status)) {
return (status);
}
}
break;
case ACPI_PTYPE2_MIN:
/* Each sub-package has a variable but minimum length */
expected_count = package->ret_info.count1;
if (sub_package->package.count < expected_count) {
goto package_too_small;
}
/* Check the type of each sub-package element */
status =
acpi_ns_check_package_elements(data, sub_elements,
package->ret_info.
object_type1,
sub_package->package.
count, 0, 0, 0);
if (ACPI_FAILURE(status)) {
return (status);
}
break;
case ACPI_PTYPE2_COUNT:
/*
* First element is the (Integer) count of elements, including
* the count field.
*/
status = acpi_ns_check_object_type(data, sub_elements,
ACPI_RTYPE_INTEGER,
0);
if (ACPI_FAILURE(status)) {
return (status);
}
/*
* Make sure package is large enough for the Count and is
* is as large as the minimum size
*/
expected_count = (u32)(*sub_elements)->integer.value;
if (sub_package->package.count < expected_count) {
goto package_too_small;
}
if (sub_package->package.count <
package->ret_info.count1) {
expected_count = package->ret_info.count1;
goto package_too_small;
}
/* Check the type of each sub-package element */
status =
acpi_ns_check_package_elements(data,
(sub_elements + 1),
package->ret_info.
object_type1,
(expected_count - 1),
0, 0, 1);
if (ACPI_FAILURE(status)) {
return (status);
}
break;
default: /* Should not get here, type was validated by caller */
return (AE_AML_INTERNAL);
}
elements++;
}
return (AE_OK);
package_too_small:
/* The sub-package count was smaller than required */
ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
"Return Sub-Package[%u] is too small - found %u elements, expected %u",
i, sub_package->package.count, expected_count));
return (AE_AML_OPERAND_VALUE);
}
/*******************************************************************************
*
* FUNCTION: acpi_ns_check_package_elements
*
* PARAMETERS: Data - Pointer to validation data structure
* Elements - Pointer to the package elements array
* Type1 - Object type for first group
* Count1 - Count for first group
* Type2 - Object type for second group
* Count2 - Count for second group
* start_index - Start of the first group of elements
*
* RETURN: Status
*
* DESCRIPTION: Check that all elements of a package are of the correct object
* type. Supports up to two groups of different object types.
*
******************************************************************************/
static acpi_status
acpi_ns_check_package_elements(struct acpi_predefined_data *data,
union acpi_operand_object **elements,
u8 type1,
u32 count1,
u8 type2, u32 count2, u32 start_index)
{
union acpi_operand_object **this_element = elements;
acpi_status status;
u32 i;
/*
* Up to two groups of package elements are supported by the data
* structure. All elements in each group must be of the same type.
* The second group can have a count of zero.
*/
for (i = 0; i < count1; i++) {
status = acpi_ns_check_object_type(data, this_element,
type1, i + start_index);
if (ACPI_FAILURE(status)) {
return (status);
}
this_element++;
}
for (i = 0; i < count2; i++) {
status = acpi_ns_check_object_type(data, this_element,
type2,
(i + count1 + start_index));
if (ACPI_FAILURE(status)) {
return (status);
}
this_element++;
}
return (AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ns_check_object_type
*
* PARAMETERS: Data - Pointer to validation data structure
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
* expected_btypes - Bitmap of expected return type(s)
* package_index - Index of object within parent package (if
* applicable - ACPI_NOT_PACKAGE_ELEMENT
* otherwise)
*
* RETURN: Status
*
* DESCRIPTION: Check the type of the return object against the expected object
* type(s). Use of Btype allows multiple expected object types.
*
******************************************************************************/
static acpi_status
acpi_ns_check_object_type(struct acpi_predefined_data *data,
union acpi_operand_object **return_object_ptr,
u32 expected_btypes, u32 package_index)
{
union acpi_operand_object *return_object = *return_object_ptr;
acpi_status status = AE_OK;
u32 return_btype;
char type_buffer[48]; /* Room for 5 types */
/*
* If we get a NULL return_object here, it is a NULL package element,
* and this is always an error.
*/
if (!return_object) {
goto type_error_exit;
}
/* A Namespace node should not get here, but make sure */
if (ACPI_GET_DESCRIPTOR_TYPE(return_object) == ACPI_DESC_TYPE_NAMED) {
ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
"Invalid return type - Found a Namespace node [%4.4s] type %s",
return_object->node.name.ascii,
acpi_ut_get_type_name(return_object->node.
type)));
return (AE_AML_OPERAND_TYPE);
}
/*
* Convert the object type (ACPI_TYPE_xxx) to a bitmapped object type.
* The bitmapped type allows multiple possible return types.
*
* Note, the cases below must handle all of the possible types returned
* from all of the predefined names (including elements of returned
* packages)
*/
switch (return_object->common.type) {
case ACPI_TYPE_INTEGER:
return_btype = ACPI_RTYPE_INTEGER;
break;
case ACPI_TYPE_BUFFER:
return_btype = ACPI_RTYPE_BUFFER;
break;
case ACPI_TYPE_STRING:
return_btype = ACPI_RTYPE_STRING;
break;
case ACPI_TYPE_PACKAGE:
return_btype = ACPI_RTYPE_PACKAGE;
break;
case ACPI_TYPE_LOCAL_REFERENCE:
return_btype = ACPI_RTYPE_REFERENCE;
break;
default:
/* Not one of the supported objects, must be incorrect */
goto type_error_exit;
}
/* Is the object one of the expected types? */
if (!(return_btype & expected_btypes)) {
/* Type mismatch -- attempt repair of the returned object */
status = acpi_ns_repair_object(data, expected_btypes,
package_index,
return_object_ptr);
if (ACPI_SUCCESS(status)) {
return (AE_OK); /* Repair was successful */
}
goto type_error_exit;
}
/* For reference objects, check that the reference type is correct */
if (return_object->common.type == ACPI_TYPE_LOCAL_REFERENCE) {
status = acpi_ns_check_reference(data, return_object);
}
return (status);
type_error_exit:
/* Create a string with all expected types for this predefined object */
acpi_ns_get_expected_types(type_buffer, expected_btypes);
if (package_index == ACPI_NOT_PACKAGE_ELEMENT) {
ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
"Return type mismatch - found %s, expected %s",
acpi_ut_get_object_type_name
(return_object), type_buffer));
} else {
ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
"Return Package type mismatch at index %u - "
"found %s, expected %s", package_index,
acpi_ut_get_object_type_name
(return_object), type_buffer));
}
return (AE_AML_OPERAND_TYPE);
}
/*******************************************************************************
*
* FUNCTION: acpi_ns_check_reference
*
* PARAMETERS: Data - Pointer to validation data structure
* return_object - Object returned from the evaluation of a
* method or object
*
* RETURN: Status
*
* DESCRIPTION: Check a returned reference object for the correct reference
* type. The only reference type that can be returned from a
* predefined method is a named reference. All others are invalid.
*
******************************************************************************/
static acpi_status
acpi_ns_check_reference(struct acpi_predefined_data *data,
union acpi_operand_object *return_object)
{
/*
* Check the reference object for the correct reference type (opcode).
* The only type of reference that can be converted to an union acpi_object is
* a reference to a named object (reference class: NAME)
*/
if (return_object->reference.class == ACPI_REFCLASS_NAME) {
return (AE_OK);
}
ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
"Return type mismatch - unexpected reference object type [%s] %2.2X",
acpi_ut_get_reference_name(return_object),
return_object->reference.class));
return (AE_AML_OPERAND_TYPE);
}
/*******************************************************************************
*
* FUNCTION: acpi_ns_get_expected_types
*
* PARAMETERS: Buffer - Pointer to where the string is returned
* expected_btypes - Bitmap of expected return type(s)
*
* RETURN: Buffer is populated with type names.
*
* DESCRIPTION: Translate the expected types bitmap into a string of ascii
* names of expected types, for use in warning messages.
*
******************************************************************************/
static void acpi_ns_get_expected_types(char *buffer, u32 expected_btypes)
{
u32 this_rtype;
u32 i;
u32 j;
j = 1;
buffer[0] = 0;
this_rtype = ACPI_RTYPE_INTEGER;
for (i = 0; i < ACPI_NUM_RTYPES; i++) {
/* If one of the expected types, concatenate the name of this type */
if (expected_btypes & this_rtype) {
ACPI_STRCAT(buffer, &acpi_rtype_names[i][j]);
j = 0; /* Use name separator from now on */
}
this_rtype <<= 1; /* Next Rtype */
}
}