Eric Miao 38f539a608 [ARM] pxa: move common GPIO handling code into plat-pxa ... 1. add common GPIO handling code into [arch/arm/plat-pxa] 2. common code in <mach/gpio.h> moved into <plat/gpio.h>, new processors should implement its own <mach/gpio.h>, provide the following required definitions and '#include <plat/gpio.h>' in the end: - GPIO_REGS_VIRT for mapped virtual address of the GPIO registers' physical I/O memory - macros of GPLR(), GPSR(), GPDR() for constant optimization for functions gpio_{set,get}_value() (so that bit-bang code can still have tolerable performance) - NR_BUILTIN_GPIO for the number of onchip GPIO - definitions of __gpio_is_inverted() and __gpio_is_occupied(), they can be either macros or inlined functions Signed-off-by: Eric Miao <eric.miao@marvell.com>		2009-03-23 10:11:33 +08:00
..
boot	[ARM] 5412/1: XSCALE: add ice dcc support	2009-02-27 20:57:46 +00:00
common	[ARM] pxa: separate definitions from pxa-regs.h and remove it finally	2009-03-09 21:22:40 +08:00
configs	[ARM] pxa: add colibri PXA300 defconfig	2009-03-23 09:57:55 +08:00
include/asm	Merge branch 'dma' into devel	2009-02-21 21:42:50 +00:00
kernel	[ARM] 5412/1: XSCALE: add ice dcc support	2009-02-27 20:57:46 +00:00
lib
mach-aaec2000
mach-at91	[ARM] 5399/1: [AT91] Configure MCLK and SSC for AT91SAMG20-EK	2009-02-21 16:39:40 +00:00
mach-clps711x
mach-davinci	USB: musb_hdrc: another davinci buildfix (otg related)	2009-01-27 16:15:32 -08:00
mach-ebsa110
mach-ep93xx	[ARM] 5414/2: ep93xx m2p dma core	2009-03-03 12:20:11 +00:00
mach-footbridge	Merge branch 'dma' into devel	2009-02-21 21:42:50 +00:00
mach-h720x
mach-imx
mach-integrator
mach-iop13xx
mach-iop32x
mach-iop33x
mach-ixp4xx
mach-ixp23xx
mach-ixp2000
mach-kirkwood
mach-ks8695	[ARM] 5372/1: ACS5K: Core board support for the ACS-5000	2009-02-10 11:24:21 +00:00
mach-l7200
mach-lh7a40x
mach-loki
mach-msm	[ARM] msm: fix build errors	2009-01-28 10:19:52 +00:00
mach-mv78xx0
mach-mx1
mach-mx2
mach-mx3
mach-netx
mach-ns9xxx
mach-omap1	ARM: OMAP: Fix hsmmc init, v2	2009-01-29 08:57:16 -08:00
mach-omap2	ARM: OMAP: fix fault in enter_full_retention()	2009-01-29 09:27:00 -08:00
mach-orion5x
mach-pnx4008
mach-pxa	[ARM] pxa: move common GPIO handling code into plat-pxa	2009-03-23 10:11:33 +08:00
mach-realview	[ARM] 5397/1: RealView: Add support for the ISP1761 USB chip	2009-02-19 11:30:27 +00:00
mach-rpc	Merge branch 'dma' into devel	2009-02-21 21:42:50 +00:00
mach-s3c24a0/include/mach
mach-s3c2400
mach-s3c2410
mach-s3c2412
mach-s3c2440
mach-s3c2442
mach-s3c2443
mach-s3c6400
mach-s3c6410
mach-sa1100	[ARM] 5407/1: SA1100: drop broken for ages iPAQ h3800 support	2009-02-21 16:39:07 +00:00
mach-shark	Merge branch 'dma' into devel	2009-02-21 21:42:50 +00:00
mach-versatile	[ARM] 5395/1: RealView: Add support for the DS1338 RTC chip	2009-02-19 11:30:25 +00:00
mach-w90x900	[ARM] 5393/1: Add W90P910 EVB NOR flash driver	2009-02-12 11:10:24 +00:00
mm	[ARM] 5366/1: fix shared memory coherency with VIVT L1 + L2 caches	2009-01-28 16:55:00 +00:00
nwfpe
oprofile	[ARM] 5382/1: unwind: Reorganise the stacktrace support	2009-02-12 13:21:17 +00:00
plat-iop
plat-mxc	Merge branch 'dma' into devel	2009-02-21 21:42:50 +00:00
plat-omap	ARM: OMAP: Fix hsmmc init, v2	2009-01-29 08:57:16 -08:00
plat-orion
plat-pxa	[ARM] pxa: move common GPIO handling code into plat-pxa	2009-03-23 10:11:33 +08:00
plat-s3c	[ARM] 5376/1: S3C24XX: Fix sparse errors in platform uncompress.h	2009-02-19 11:30:19 +00:00
plat-s3c24xx
plat-s3c64xx
tools
vfp	[ARM] 5388/1: Add hwcap bits for VFPv3 and VFPv3D16	2009-02-12 10:59:44 +00:00
Kconfig	[ARM] pxa: introduce plat-pxa for PXA common code and add DMA support	2009-03-23 10:11:31 +08:00
Kconfig-nommu
Kconfig.debug	[ARM] 5412/1: XSCALE: add ice dcc support	2009-02-27 20:57:46 +00:00
Makefile	[ARM] pxa: introduce plat-pxa for PXA common code and add DMA support	2009-03-23 10:11:31 +08:00