578f1ef91a
As usual we have a few new drivers: - TI LP8788 - TI OMAP USB TLL - Maxim MAX8907 - SMSC ECE1099 - Dialog Semiconductor DA9055 - A simpler syscon driver that allow us to get rid of the anatop one. Drivers are also gradually getting Device Tree and IRQ domain support. The following drivers got DT support: - palmas, 88pm860x, tc3589x and twl4030-audio And those ones now use the IRQ domain APIs: - 88pm860x, tc3589x, db8500_prcmu Also some other interesting changes: - Intel's ICH LPC now supports Lynx Point - TI's twl4030-audio added a GPO child - tps6527 enabled its backlight subdevice - The twl6030 pwm driver moved to the new PWM subsystem And finally a bunch of cleanup and casual fixes for mc13xxx, 88pm860x, palmas, ab8500, wm8994, wm5110, max8907 and the tps65xxx family. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIcBAABAgAGBQJQbVq4AAoJEIqAPN1PVmxKXOsP/ifwoqYkaGUsZ7M8b8iTTxlk a0/SBU1O+FDG7LbIsOyJ6VZCpipj8R4WyVqNdS2CSPVoSdT8KnakrxFY9FAtcmpA c6O7r+9dymcT7HeQ6mBQYYeEyXcZQkTXj9Y298zuRT88gccH5PQIOX8DTj6gKVxN xhuDuAWtizvwAJWfof/57p7JLilCF96Hq0UdeISD10UWJPxPmXFJTzzYw6GbPPOl zk1N6yig3VpK6sfK+QdqZykHFKj23RX57SmceHOISTpEr66ayuKIkJEqWm/IydMO XWDTT2IN80ca+1PnbrQOyiMtXg3EKrZN5WDEp2AcUiKP0fnAoZBTeuZUkqyLc3rJ W8LowQe6x5154CeLwcJc4+kmeGUhbj09GHKCsI7x/lQpMWgJCaGHGvLxAUE1uRZi 4Bn9IUP7OqE465fNolLOd1fRxgzWJxe5rBYKQB7UcOrS0NThPhu0r0qV905zBrBO tyCZz+PexTiirpbv1K0dMTcpWeHVOmtYG5uJTmw9wTRv7jW7aUhkhkW5Q+E5BAdb 9Rj5/vYertqI3VzRQ1w2z1SavzBO3OykTURWGDkwjfFWYbJtEdPYGGjRSFiphVYG 8jvs5UzrDm2ICqkpkKzovVWi9lXyvNVVCgSwxHQeoPXfqb5dXLlbUZZBaCaQpRII XlItAJvIiUNIA8bXLoC8 =n6lp -----END PGP SIGNATURE----- Merge tag 'mfd-3.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD changes from Samuel Ortiz: "MFD bits for the 3.7 merge window. As usual we have a few new drivers: - TI LP8788 - TI OMAP USB TLL - Maxim MAX8907 - SMSC ECE1099 - Dialog Semiconductor DA9055 - A simpler syscon driver that allow us to get rid of the anatop one. Drivers are also gradually getting Device Tree and IRQ domain support. The following drivers got DT support: - palmas, 88pm860x, tc3589x and twl4030-audio And those ones now use the IRQ domain APIs: - 88pm860x, tc3589x, db8500_prcmu Also some other interesting changes: - Intel's ICH LPC now supports Lynx Point - TI's twl4030-audio added a GPO child - tps6527 enabled its backlight subdevice - The twl6030 pwm driver moved to the new PWM subsystem And finally a bunch of cleanup and casual fixes for mc13xxx, 88pm860x, palmas, ab8500, wm8994, wm5110, max8907 and the tps65xxx family." Fix up various annoying conflicts: the DT and IRQ domain support came in twice and was already in 3.6. And then it was apparently rebased. Guys, DON'T REBASE! * tag 'mfd-3.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (89 commits) ARM: dts: Enable 88pm860x pmic mfd: 88pm860x: Move gpadc init into touch mfd: 88pm860x: Device tree support mfd: 88pm860x: Use irqdomain mfd: smsc: Add support for smsc gpio io/keypad driver backlight: tps65217_bl: Add missing platform_set_drvdata in tps65217_bl_probe mfd: DA9055 core driver mfd: tps65910: Add alarm interrupt of TPS65910 RTC to mfd device list mfd: wm5110: Add register patches for revision B mfd: wm5110: Disable control interface error report for WM5110 rev B mfd: max8907: Remove regulator-compatible from DT docs backlight: Add TPS65217 WLED driver mfd: Add backlight as subdevice to the tps65217 mfd: Provide the PRCMU with its own IRQ domain mfd: Fix max8907 sparse warning mfd: Add lp8788 mfd driver mfd: dbx500: Provide a more accurate smp_twd clock mfd: rc5t583: Fix warning messages regulator: palmas: Add DT support mfd: palmas: Change regulator defns to better suite DT ...
913 lines
21 KiB
C
913 lines
21 KiB
C
/*
|
|
* Driver for Regulator part of Palmas PMIC Chips
|
|
*
|
|
* Copyright 2011-2012 Texas Instruments Inc.
|
|
*
|
|
* Author: Graeme Gregory <gg@slimlogic.co.uk>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/err.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/mfd/palmas.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
|
|
struct regs_info {
|
|
char *name;
|
|
u8 vsel_addr;
|
|
u8 ctrl_addr;
|
|
u8 tstep_addr;
|
|
};
|
|
|
|
static const struct regs_info palmas_regs_info[] = {
|
|
{
|
|
.name = "SMPS12",
|
|
.vsel_addr = PALMAS_SMPS12_VOLTAGE,
|
|
.ctrl_addr = PALMAS_SMPS12_CTRL,
|
|
.tstep_addr = PALMAS_SMPS12_TSTEP,
|
|
},
|
|
{
|
|
.name = "SMPS123",
|
|
.vsel_addr = PALMAS_SMPS12_VOLTAGE,
|
|
.ctrl_addr = PALMAS_SMPS12_CTRL,
|
|
.tstep_addr = PALMAS_SMPS12_TSTEP,
|
|
},
|
|
{
|
|
.name = "SMPS3",
|
|
.vsel_addr = PALMAS_SMPS3_VOLTAGE,
|
|
.ctrl_addr = PALMAS_SMPS3_CTRL,
|
|
},
|
|
{
|
|
.name = "SMPS45",
|
|
.vsel_addr = PALMAS_SMPS45_VOLTAGE,
|
|
.ctrl_addr = PALMAS_SMPS45_CTRL,
|
|
.tstep_addr = PALMAS_SMPS45_TSTEP,
|
|
},
|
|
{
|
|
.name = "SMPS457",
|
|
.vsel_addr = PALMAS_SMPS45_VOLTAGE,
|
|
.ctrl_addr = PALMAS_SMPS45_CTRL,
|
|
.tstep_addr = PALMAS_SMPS45_TSTEP,
|
|
},
|
|
{
|
|
.name = "SMPS6",
|
|
.vsel_addr = PALMAS_SMPS6_VOLTAGE,
|
|
.ctrl_addr = PALMAS_SMPS6_CTRL,
|
|
.tstep_addr = PALMAS_SMPS6_TSTEP,
|
|
},
|
|
{
|
|
.name = "SMPS7",
|
|
.vsel_addr = PALMAS_SMPS7_VOLTAGE,
|
|
.ctrl_addr = PALMAS_SMPS7_CTRL,
|
|
},
|
|
{
|
|
.name = "SMPS8",
|
|
.vsel_addr = PALMAS_SMPS8_VOLTAGE,
|
|
.ctrl_addr = PALMAS_SMPS8_CTRL,
|
|
.tstep_addr = PALMAS_SMPS8_TSTEP,
|
|
},
|
|
{
|
|
.name = "SMPS9",
|
|
.vsel_addr = PALMAS_SMPS9_VOLTAGE,
|
|
.ctrl_addr = PALMAS_SMPS9_CTRL,
|
|
},
|
|
{
|
|
.name = "SMPS10",
|
|
},
|
|
{
|
|
.name = "LDO1",
|
|
.vsel_addr = PALMAS_LDO1_VOLTAGE,
|
|
.ctrl_addr = PALMAS_LDO1_CTRL,
|
|
},
|
|
{
|
|
.name = "LDO2",
|
|
.vsel_addr = PALMAS_LDO2_VOLTAGE,
|
|
.ctrl_addr = PALMAS_LDO2_CTRL,
|
|
},
|
|
{
|
|
.name = "LDO3",
|
|
.vsel_addr = PALMAS_LDO3_VOLTAGE,
|
|
.ctrl_addr = PALMAS_LDO3_CTRL,
|
|
},
|
|
{
|
|
.name = "LDO4",
|
|
.vsel_addr = PALMAS_LDO4_VOLTAGE,
|
|
.ctrl_addr = PALMAS_LDO4_CTRL,
|
|
},
|
|
{
|
|
.name = "LDO5",
|
|
.vsel_addr = PALMAS_LDO5_VOLTAGE,
|
|
.ctrl_addr = PALMAS_LDO5_CTRL,
|
|
},
|
|
{
|
|
.name = "LDO6",
|
|
.vsel_addr = PALMAS_LDO6_VOLTAGE,
|
|
.ctrl_addr = PALMAS_LDO6_CTRL,
|
|
},
|
|
{
|
|
.name = "LDO7",
|
|
.vsel_addr = PALMAS_LDO7_VOLTAGE,
|
|
.ctrl_addr = PALMAS_LDO7_CTRL,
|
|
},
|
|
{
|
|
.name = "LDO8",
|
|
.vsel_addr = PALMAS_LDO8_VOLTAGE,
|
|
.ctrl_addr = PALMAS_LDO8_CTRL,
|
|
},
|
|
{
|
|
.name = "LDO9",
|
|
.vsel_addr = PALMAS_LDO9_VOLTAGE,
|
|
.ctrl_addr = PALMAS_LDO9_CTRL,
|
|
},
|
|
{
|
|
.name = "LDOLN",
|
|
.vsel_addr = PALMAS_LDOLN_VOLTAGE,
|
|
.ctrl_addr = PALMAS_LDOLN_CTRL,
|
|
},
|
|
{
|
|
.name = "LDOUSB",
|
|
.vsel_addr = PALMAS_LDOUSB_VOLTAGE,
|
|
.ctrl_addr = PALMAS_LDOUSB_CTRL,
|
|
},
|
|
};
|
|
|
|
#define SMPS_CTRL_MODE_OFF 0x00
|
|
#define SMPS_CTRL_MODE_ON 0x01
|
|
#define SMPS_CTRL_MODE_ECO 0x02
|
|
#define SMPS_CTRL_MODE_PWM 0x03
|
|
|
|
/* These values are derived from the data sheet. And are the number of steps
|
|
* where there is a voltage change, the ranges at beginning and end of register
|
|
* max/min values where there are no change are ommitted.
|
|
*
|
|
* So they are basically (maxV-minV)/stepV
|
|
*/
|
|
#define PALMAS_SMPS_NUM_VOLTAGES 116
|
|
#define PALMAS_SMPS10_NUM_VOLTAGES 2
|
|
#define PALMAS_LDO_NUM_VOLTAGES 50
|
|
|
|
#define SMPS10_VSEL (1<<3)
|
|
#define SMPS10_BOOST_EN (1<<2)
|
|
#define SMPS10_BYPASS_EN (1<<1)
|
|
#define SMPS10_SWITCH_EN (1<<0)
|
|
|
|
#define REGULATOR_SLAVE 0
|
|
|
|
static int palmas_smps_read(struct palmas *palmas, unsigned int reg,
|
|
unsigned int *dest)
|
|
{
|
|
unsigned int addr;
|
|
|
|
addr = PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE, reg);
|
|
|
|
return regmap_read(palmas->regmap[REGULATOR_SLAVE], addr, dest);
|
|
}
|
|
|
|
static int palmas_smps_write(struct palmas *palmas, unsigned int reg,
|
|
unsigned int value)
|
|
{
|
|
unsigned int addr;
|
|
|
|
addr = PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE, reg);
|
|
|
|
return regmap_write(palmas->regmap[REGULATOR_SLAVE], addr, value);
|
|
}
|
|
|
|
static int palmas_ldo_read(struct palmas *palmas, unsigned int reg,
|
|
unsigned int *dest)
|
|
{
|
|
unsigned int addr;
|
|
|
|
addr = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE, reg);
|
|
|
|
return regmap_read(palmas->regmap[REGULATOR_SLAVE], addr, dest);
|
|
}
|
|
|
|
static int palmas_ldo_write(struct palmas *palmas, unsigned int reg,
|
|
unsigned int value)
|
|
{
|
|
unsigned int addr;
|
|
|
|
addr = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE, reg);
|
|
|
|
return regmap_write(palmas->regmap[REGULATOR_SLAVE], addr, value);
|
|
}
|
|
|
|
static int palmas_is_enabled_smps(struct regulator_dev *dev)
|
|
{
|
|
struct palmas_pmic *pmic = rdev_get_drvdata(dev);
|
|
int id = rdev_get_id(dev);
|
|
unsigned int reg;
|
|
|
|
palmas_smps_read(pmic->palmas, palmas_regs_info[id].ctrl_addr, ®);
|
|
|
|
reg &= PALMAS_SMPS12_CTRL_STATUS_MASK;
|
|
reg >>= PALMAS_SMPS12_CTRL_STATUS_SHIFT;
|
|
|
|
return !!(reg);
|
|
}
|
|
|
|
static int palmas_enable_smps(struct regulator_dev *dev)
|
|
{
|
|
struct palmas_pmic *pmic = rdev_get_drvdata(dev);
|
|
int id = rdev_get_id(dev);
|
|
unsigned int reg;
|
|
|
|
palmas_smps_read(pmic->palmas, palmas_regs_info[id].ctrl_addr, ®);
|
|
|
|
reg &= ~PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK;
|
|
reg |= SMPS_CTRL_MODE_ON;
|
|
|
|
palmas_smps_write(pmic->palmas, palmas_regs_info[id].ctrl_addr, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int palmas_disable_smps(struct regulator_dev *dev)
|
|
{
|
|
struct palmas_pmic *pmic = rdev_get_drvdata(dev);
|
|
int id = rdev_get_id(dev);
|
|
unsigned int reg;
|
|
|
|
palmas_smps_read(pmic->palmas, palmas_regs_info[id].ctrl_addr, ®);
|
|
|
|
reg &= ~PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK;
|
|
|
|
palmas_smps_write(pmic->palmas, palmas_regs_info[id].ctrl_addr, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int palmas_set_mode_smps(struct regulator_dev *dev, unsigned int mode)
|
|
{
|
|
struct palmas_pmic *pmic = rdev_get_drvdata(dev);
|
|
int id = rdev_get_id(dev);
|
|
unsigned int reg;
|
|
|
|
palmas_smps_read(pmic->palmas, palmas_regs_info[id].ctrl_addr, ®);
|
|
reg &= ~PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK;
|
|
|
|
switch (mode) {
|
|
case REGULATOR_MODE_NORMAL:
|
|
reg |= SMPS_CTRL_MODE_ON;
|
|
break;
|
|
case REGULATOR_MODE_IDLE:
|
|
reg |= SMPS_CTRL_MODE_ECO;
|
|
break;
|
|
case REGULATOR_MODE_FAST:
|
|
reg |= SMPS_CTRL_MODE_PWM;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
palmas_smps_write(pmic->palmas, palmas_regs_info[id].ctrl_addr, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int palmas_get_mode_smps(struct regulator_dev *dev)
|
|
{
|
|
struct palmas_pmic *pmic = rdev_get_drvdata(dev);
|
|
int id = rdev_get_id(dev);
|
|
unsigned int reg;
|
|
|
|
palmas_smps_read(pmic->palmas, palmas_regs_info[id].ctrl_addr, ®);
|
|
reg &= PALMAS_SMPS12_CTRL_STATUS_MASK;
|
|
reg >>= PALMAS_SMPS12_CTRL_STATUS_SHIFT;
|
|
|
|
switch (reg) {
|
|
case SMPS_CTRL_MODE_ON:
|
|
return REGULATOR_MODE_NORMAL;
|
|
case SMPS_CTRL_MODE_ECO:
|
|
return REGULATOR_MODE_IDLE;
|
|
case SMPS_CTRL_MODE_PWM:
|
|
return REGULATOR_MODE_FAST;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int palmas_list_voltage_smps(struct regulator_dev *dev,
|
|
unsigned selector)
|
|
{
|
|
struct palmas_pmic *pmic = rdev_get_drvdata(dev);
|
|
int id = rdev_get_id(dev);
|
|
int mult = 1;
|
|
|
|
if (!selector)
|
|
return 0;
|
|
|
|
/* Read the multiplier set in VSEL register to return
|
|
* the correct voltage.
|
|
*/
|
|
if (pmic->range[id])
|
|
mult = 2;
|
|
|
|
/* Voltage is (0.49V + (selector * 0.01V)) * RANGE
|
|
* as defined in data sheet. RANGE is either x1 or x2
|
|
*/
|
|
return (490000 + (selector * 10000)) * mult;
|
|
}
|
|
|
|
static int palmas_get_voltage_smps_sel(struct regulator_dev *dev)
|
|
{
|
|
struct palmas_pmic *pmic = rdev_get_drvdata(dev);
|
|
int id = rdev_get_id(dev);
|
|
int selector;
|
|
unsigned int reg;
|
|
unsigned int addr;
|
|
|
|
addr = palmas_regs_info[id].vsel_addr;
|
|
|
|
palmas_smps_read(pmic->palmas, addr, ®);
|
|
|
|
selector = reg & PALMAS_SMPS12_VOLTAGE_VSEL_MASK;
|
|
|
|
/* Adjust selector to match list_voltage ranges */
|
|
if ((selector > 0) && (selector < 6))
|
|
selector = 6;
|
|
if (!selector)
|
|
selector = 5;
|
|
if (selector > 121)
|
|
selector = 121;
|
|
selector -= 5;
|
|
|
|
return selector;
|
|
}
|
|
|
|
static int palmas_set_voltage_smps_sel(struct regulator_dev *dev,
|
|
unsigned selector)
|
|
{
|
|
struct palmas_pmic *pmic = rdev_get_drvdata(dev);
|
|
int id = rdev_get_id(dev);
|
|
unsigned int reg = 0;
|
|
unsigned int addr;
|
|
|
|
addr = palmas_regs_info[id].vsel_addr;
|
|
|
|
/* Make sure we don't change the value of RANGE */
|
|
if (pmic->range[id])
|
|
reg |= PALMAS_SMPS12_VOLTAGE_RANGE;
|
|
|
|
/* Adjust the linux selector into range used in VSEL register */
|
|
if (selector)
|
|
reg |= selector + 5;
|
|
|
|
palmas_smps_write(pmic->palmas, addr, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int palmas_map_voltage_smps(struct regulator_dev *rdev,
|
|
int min_uV, int max_uV)
|
|
{
|
|
struct palmas_pmic *pmic = rdev_get_drvdata(rdev);
|
|
int id = rdev_get_id(rdev);
|
|
int ret, voltage;
|
|
|
|
if (min_uV == 0)
|
|
return 0;
|
|
|
|
if (pmic->range[id]) { /* RANGE is x2 */
|
|
if (min_uV < 1000000)
|
|
min_uV = 1000000;
|
|
ret = DIV_ROUND_UP(min_uV - 1000000, 20000) + 1;
|
|
} else { /* RANGE is x1 */
|
|
if (min_uV < 500000)
|
|
min_uV = 500000;
|
|
ret = DIV_ROUND_UP(min_uV - 500000, 10000) + 1;
|
|
}
|
|
|
|
/* Map back into a voltage to verify we're still in bounds */
|
|
voltage = palmas_list_voltage_smps(rdev, ret);
|
|
if (voltage < min_uV || voltage > max_uV)
|
|
return -EINVAL;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct regulator_ops palmas_ops_smps = {
|
|
.is_enabled = palmas_is_enabled_smps,
|
|
.enable = palmas_enable_smps,
|
|
.disable = palmas_disable_smps,
|
|
.set_mode = palmas_set_mode_smps,
|
|
.get_mode = palmas_get_mode_smps,
|
|
.get_voltage_sel = palmas_get_voltage_smps_sel,
|
|
.set_voltage_sel = palmas_set_voltage_smps_sel,
|
|
.list_voltage = palmas_list_voltage_smps,
|
|
.map_voltage = palmas_map_voltage_smps,
|
|
};
|
|
|
|
static struct regulator_ops palmas_ops_smps10 = {
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
};
|
|
|
|
static int palmas_is_enabled_ldo(struct regulator_dev *dev)
|
|
{
|
|
struct palmas_pmic *pmic = rdev_get_drvdata(dev);
|
|
int id = rdev_get_id(dev);
|
|
unsigned int reg;
|
|
|
|
palmas_ldo_read(pmic->palmas, palmas_regs_info[id].ctrl_addr, ®);
|
|
|
|
reg &= PALMAS_LDO1_CTRL_STATUS;
|
|
|
|
return !!(reg);
|
|
}
|
|
|
|
static int palmas_list_voltage_ldo(struct regulator_dev *dev,
|
|
unsigned selector)
|
|
{
|
|
if (!selector)
|
|
return 0;
|
|
|
|
/* voltage is 0.85V + (selector * 0.05v) */
|
|
return 850000 + (selector * 50000);
|
|
}
|
|
|
|
static int palmas_map_voltage_ldo(struct regulator_dev *rdev,
|
|
int min_uV, int max_uV)
|
|
{
|
|
int ret, voltage;
|
|
|
|
if (min_uV == 0)
|
|
return 0;
|
|
|
|
if (min_uV < 900000)
|
|
min_uV = 900000;
|
|
ret = DIV_ROUND_UP(min_uV - 900000, 50000) + 1;
|
|
|
|
/* Map back into a voltage to verify we're still in bounds */
|
|
voltage = palmas_list_voltage_ldo(rdev, ret);
|
|
if (voltage < min_uV || voltage > max_uV)
|
|
return -EINVAL;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct regulator_ops palmas_ops_ldo = {
|
|
.is_enabled = palmas_is_enabled_ldo,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.list_voltage = palmas_list_voltage_ldo,
|
|
.map_voltage = palmas_map_voltage_ldo,
|
|
};
|
|
|
|
/*
|
|
* setup the hardware based sleep configuration of the SMPS/LDO regulators
|
|
* from the platform data. This is different to the software based control
|
|
* supported by the regulator framework as it is controlled by toggling
|
|
* pins on the PMIC such as PREQ, SYSEN, ...
|
|
*/
|
|
static int palmas_smps_init(struct palmas *palmas, int id,
|
|
struct palmas_reg_init *reg_init)
|
|
{
|
|
unsigned int reg;
|
|
unsigned int addr;
|
|
int ret;
|
|
|
|
addr = palmas_regs_info[id].ctrl_addr;
|
|
|
|
ret = palmas_smps_read(palmas, addr, ®);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (id) {
|
|
case PALMAS_REG_SMPS10:
|
|
if (reg_init->mode_sleep) {
|
|
reg &= ~PALMAS_SMPS10_CTRL_MODE_SLEEP_MASK;
|
|
reg |= reg_init->mode_sleep <<
|
|
PALMAS_SMPS10_CTRL_MODE_SLEEP_SHIFT;
|
|
}
|
|
break;
|
|
default:
|
|
if (reg_init->warm_reset)
|
|
reg |= PALMAS_SMPS12_CTRL_WR_S;
|
|
|
|
if (reg_init->roof_floor)
|
|
reg |= PALMAS_SMPS12_CTRL_ROOF_FLOOR_EN;
|
|
|
|
if (reg_init->mode_sleep) {
|
|
reg &= ~PALMAS_SMPS12_CTRL_MODE_SLEEP_MASK;
|
|
reg |= reg_init->mode_sleep <<
|
|
PALMAS_SMPS12_CTRL_MODE_SLEEP_SHIFT;
|
|
}
|
|
}
|
|
|
|
ret = palmas_smps_write(palmas, addr, reg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (palmas_regs_info[id].tstep_addr && reg_init->tstep) {
|
|
addr = palmas_regs_info[id].tstep_addr;
|
|
|
|
reg = reg_init->tstep & PALMAS_SMPS12_TSTEP_TSTEP_MASK;
|
|
|
|
ret = palmas_smps_write(palmas, addr, reg);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
if (palmas_regs_info[id].vsel_addr && reg_init->vsel) {
|
|
addr = palmas_regs_info[id].vsel_addr;
|
|
|
|
reg = reg_init->vsel;
|
|
|
|
ret = palmas_smps_write(palmas, addr, reg);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int palmas_ldo_init(struct palmas *palmas, int id,
|
|
struct palmas_reg_init *reg_init)
|
|
{
|
|
unsigned int reg;
|
|
unsigned int addr;
|
|
int ret;
|
|
|
|
addr = palmas_regs_info[id].ctrl_addr;
|
|
|
|
ret = palmas_ldo_read(palmas, addr, ®);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (reg_init->warm_reset)
|
|
reg |= PALMAS_LDO1_CTRL_WR_S;
|
|
|
|
if (reg_init->mode_sleep)
|
|
reg |= PALMAS_LDO1_CTRL_MODE_SLEEP;
|
|
|
|
ret = palmas_ldo_write(palmas, addr, reg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct of_regulator_match palmas_matches[] = {
|
|
{ .name = "smps12", },
|
|
{ .name = "smps123", },
|
|
{ .name = "smps3", },
|
|
{ .name = "smps45", },
|
|
{ .name = "smps457", },
|
|
{ .name = "smps6", },
|
|
{ .name = "smps7", },
|
|
{ .name = "smps8", },
|
|
{ .name = "smps9", },
|
|
{ .name = "smps10", },
|
|
{ .name = "ldo1", },
|
|
{ .name = "ldo2", },
|
|
{ .name = "ldo3", },
|
|
{ .name = "ldo4", },
|
|
{ .name = "ldo5", },
|
|
{ .name = "ldo6", },
|
|
{ .name = "ldo7", },
|
|
{ .name = "ldo8", },
|
|
{ .name = "ldo9", },
|
|
{ .name = "ldoln", },
|
|
{ .name = "ldousb", },
|
|
};
|
|
|
|
static void __devinit palmas_dt_to_pdata(struct device *dev,
|
|
struct device_node *node,
|
|
struct palmas_pmic_platform_data *pdata)
|
|
{
|
|
struct device_node *regulators;
|
|
u32 prop;
|
|
int idx, ret;
|
|
|
|
regulators = of_find_node_by_name(node, "regulators");
|
|
if (!regulators) {
|
|
dev_info(dev, "regulator node not found\n");
|
|
return;
|
|
}
|
|
|
|
ret = of_regulator_match(dev, regulators, palmas_matches,
|
|
PALMAS_NUM_REGS);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Error parsing regulator init data: %d\n", ret);
|
|
return;
|
|
}
|
|
|
|
for (idx = 0; idx < PALMAS_NUM_REGS; idx++) {
|
|
if (!palmas_matches[idx].init_data ||
|
|
!palmas_matches[idx].of_node)
|
|
continue;
|
|
|
|
pdata->reg_data[idx] = palmas_matches[idx].init_data;
|
|
|
|
pdata->reg_init[idx] = devm_kzalloc(dev,
|
|
sizeof(struct palmas_reg_init), GFP_KERNEL);
|
|
|
|
ret = of_property_read_u32(palmas_matches[idx].of_node,
|
|
"ti,warm_reset", &prop);
|
|
if (!ret)
|
|
pdata->reg_init[idx]->warm_reset = prop;
|
|
|
|
ret = of_property_read_u32(palmas_matches[idx].of_node,
|
|
"ti,roof_floor", &prop);
|
|
if (!ret)
|
|
pdata->reg_init[idx]->roof_floor = prop;
|
|
|
|
ret = of_property_read_u32(palmas_matches[idx].of_node,
|
|
"ti,mode_sleep", &prop);
|
|
if (!ret)
|
|
pdata->reg_init[idx]->mode_sleep = prop;
|
|
|
|
ret = of_property_read_u32(palmas_matches[idx].of_node,
|
|
"ti,warm_reset", &prop);
|
|
if (!ret)
|
|
pdata->reg_init[idx]->warm_reset = prop;
|
|
|
|
ret = of_property_read_u32(palmas_matches[idx].of_node,
|
|
"ti,tstep", &prop);
|
|
if (!ret)
|
|
pdata->reg_init[idx]->tstep = prop;
|
|
|
|
ret = of_property_read_u32(palmas_matches[idx].of_node,
|
|
"ti,vsel", &prop);
|
|
if (!ret)
|
|
pdata->reg_init[idx]->vsel = prop;
|
|
}
|
|
|
|
ret = of_property_read_u32(node, "ti,ldo6_vibrator", &prop);
|
|
if (!ret)
|
|
pdata->ldo6_vibrator = prop;
|
|
}
|
|
|
|
|
|
static __devinit int palmas_probe(struct platform_device *pdev)
|
|
{
|
|
struct palmas *palmas = dev_get_drvdata(pdev->dev.parent);
|
|
struct palmas_pmic_platform_data *pdata = pdev->dev.platform_data;
|
|
struct device_node *node = pdev->dev.of_node;
|
|
struct regulator_dev *rdev;
|
|
struct regulator_config config = { };
|
|
struct palmas_pmic *pmic;
|
|
struct palmas_reg_init *reg_init;
|
|
int id = 0, ret;
|
|
unsigned int addr, reg;
|
|
|
|
if (node && !pdata) {
|
|
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
|
|
|
|
if (!pdata)
|
|
return -ENOMEM;
|
|
|
|
palmas_dt_to_pdata(&pdev->dev, node, pdata);
|
|
}
|
|
|
|
pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL);
|
|
if (!pmic)
|
|
return -ENOMEM;
|
|
|
|
pmic->dev = &pdev->dev;
|
|
pmic->palmas = palmas;
|
|
palmas->pmic = pmic;
|
|
platform_set_drvdata(pdev, pmic);
|
|
|
|
ret = palmas_smps_read(palmas, PALMAS_SMPS_CTRL, ®);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (reg & PALMAS_SMPS_CTRL_SMPS12_SMPS123_EN)
|
|
pmic->smps123 = 1;
|
|
|
|
if (reg & PALMAS_SMPS_CTRL_SMPS45_SMPS457_EN)
|
|
pmic->smps457 = 1;
|
|
|
|
config.regmap = palmas->regmap[REGULATOR_SLAVE];
|
|
config.dev = &pdev->dev;
|
|
config.driver_data = pmic;
|
|
|
|
for (id = 0; id < PALMAS_REG_LDO1; id++) {
|
|
|
|
/*
|
|
* Miss out regulators which are not available due
|
|
* to slaving configurations.
|
|
*/
|
|
switch (id) {
|
|
case PALMAS_REG_SMPS12:
|
|
case PALMAS_REG_SMPS3:
|
|
if (pmic->smps123)
|
|
continue;
|
|
break;
|
|
case PALMAS_REG_SMPS123:
|
|
if (!pmic->smps123)
|
|
continue;
|
|
break;
|
|
case PALMAS_REG_SMPS45:
|
|
case PALMAS_REG_SMPS7:
|
|
if (pmic->smps457)
|
|
continue;
|
|
break;
|
|
case PALMAS_REG_SMPS457:
|
|
if (!pmic->smps457)
|
|
continue;
|
|
}
|
|
|
|
/* Register the regulators */
|
|
pmic->desc[id].name = palmas_regs_info[id].name;
|
|
pmic->desc[id].id = id;
|
|
|
|
switch (id) {
|
|
case PALMAS_REG_SMPS10:
|
|
pmic->desc[id].n_voltages = PALMAS_SMPS10_NUM_VOLTAGES;
|
|
pmic->desc[id].ops = &palmas_ops_smps10;
|
|
pmic->desc[id].vsel_reg =
|
|
PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
|
|
PALMAS_SMPS10_CTRL);
|
|
pmic->desc[id].vsel_mask = SMPS10_VSEL;
|
|
pmic->desc[id].enable_reg =
|
|
PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
|
|
PALMAS_SMPS10_STATUS);
|
|
pmic->desc[id].enable_mask = SMPS10_BOOST_EN;
|
|
pmic->desc[id].min_uV = 3750000;
|
|
pmic->desc[id].uV_step = 1250000;
|
|
break;
|
|
default:
|
|
pmic->desc[id].ops = &palmas_ops_smps;
|
|
pmic->desc[id].n_voltages = PALMAS_SMPS_NUM_VOLTAGES;
|
|
}
|
|
|
|
pmic->desc[id].type = REGULATOR_VOLTAGE;
|
|
pmic->desc[id].owner = THIS_MODULE;
|
|
|
|
/* Initialise sleep/init values from platform data */
|
|
if (pdata) {
|
|
reg_init = pdata->reg_init[id];
|
|
if (reg_init) {
|
|
ret = palmas_smps_init(palmas, id, reg_init);
|
|
if (ret)
|
|
goto err_unregister_regulator;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* read and store the RANGE bit for later use
|
|
* This must be done before regulator is probed otherwise
|
|
* we error in probe with unsuportable ranges.
|
|
*/
|
|
if (id != PALMAS_REG_SMPS10) {
|
|
addr = palmas_regs_info[id].vsel_addr;
|
|
|
|
ret = palmas_smps_read(pmic->palmas, addr, ®);
|
|
if (ret)
|
|
goto err_unregister_regulator;
|
|
if (reg & PALMAS_SMPS12_VOLTAGE_RANGE)
|
|
pmic->range[id] = 1;
|
|
}
|
|
|
|
if (pdata)
|
|
config.init_data = pdata->reg_data[id];
|
|
else
|
|
config.init_data = NULL;
|
|
|
|
config.of_node = palmas_matches[id].of_node;
|
|
|
|
rdev = regulator_register(&pmic->desc[id], &config);
|
|
if (IS_ERR(rdev)) {
|
|
dev_err(&pdev->dev,
|
|
"failed to register %s regulator\n",
|
|
pdev->name);
|
|
ret = PTR_ERR(rdev);
|
|
goto err_unregister_regulator;
|
|
}
|
|
|
|
/* Save regulator for cleanup */
|
|
pmic->rdev[id] = rdev;
|
|
}
|
|
|
|
/* Start this loop from the id left from previous loop */
|
|
for (; id < PALMAS_NUM_REGS; id++) {
|
|
|
|
/* Miss out regulators which are not available due
|
|
* to alternate functions.
|
|
*/
|
|
|
|
/* Register the regulators */
|
|
pmic->desc[id].name = palmas_regs_info[id].name;
|
|
pmic->desc[id].id = id;
|
|
pmic->desc[id].n_voltages = PALMAS_LDO_NUM_VOLTAGES;
|
|
|
|
pmic->desc[id].ops = &palmas_ops_ldo;
|
|
|
|
pmic->desc[id].type = REGULATOR_VOLTAGE;
|
|
pmic->desc[id].owner = THIS_MODULE;
|
|
pmic->desc[id].vsel_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE,
|
|
palmas_regs_info[id].vsel_addr);
|
|
pmic->desc[id].vsel_mask = PALMAS_LDO1_VOLTAGE_VSEL_MASK;
|
|
pmic->desc[id].enable_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE,
|
|
palmas_regs_info[id].ctrl_addr);
|
|
pmic->desc[id].enable_mask = PALMAS_LDO1_CTRL_MODE_ACTIVE;
|
|
|
|
if (pdata)
|
|
config.init_data = pdata->reg_data[id];
|
|
else
|
|
config.init_data = NULL;
|
|
|
|
config.of_node = palmas_matches[id].of_node;
|
|
|
|
rdev = regulator_register(&pmic->desc[id], &config);
|
|
if (IS_ERR(rdev)) {
|
|
dev_err(&pdev->dev,
|
|
"failed to register %s regulator\n",
|
|
pdev->name);
|
|
ret = PTR_ERR(rdev);
|
|
goto err_unregister_regulator;
|
|
}
|
|
|
|
/* Save regulator for cleanup */
|
|
pmic->rdev[id] = rdev;
|
|
|
|
/* Initialise sleep/init values from platform data */
|
|
if (pdata) {
|
|
reg_init = pdata->reg_init[id];
|
|
if (reg_init) {
|
|
ret = palmas_ldo_init(palmas, id, reg_init);
|
|
if (ret) {
|
|
regulator_unregister(pmic->rdev[id]);
|
|
goto err_unregister_regulator;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_unregister_regulator:
|
|
while (--id >= 0)
|
|
regulator_unregister(pmic->rdev[id]);
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit palmas_remove(struct platform_device *pdev)
|
|
{
|
|
struct palmas_pmic *pmic = platform_get_drvdata(pdev);
|
|
int id;
|
|
|
|
for (id = 0; id < PALMAS_NUM_REGS; id++)
|
|
regulator_unregister(pmic->rdev[id]);
|
|
return 0;
|
|
}
|
|
|
|
static struct of_device_id __devinitdata of_palmas_match_tbl[] = {
|
|
{ .compatible = "ti,palmas-pmic", },
|
|
{ /* end */ }
|
|
};
|
|
|
|
static struct platform_driver palmas_driver = {
|
|
.driver = {
|
|
.name = "palmas-pmic",
|
|
.of_match_table = of_palmas_match_tbl,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = palmas_probe,
|
|
.remove = __devexit_p(palmas_remove),
|
|
};
|
|
|
|
static int __init palmas_init(void)
|
|
{
|
|
return platform_driver_register(&palmas_driver);
|
|
}
|
|
subsys_initcall(palmas_init);
|
|
|
|
static void __exit palmas_exit(void)
|
|
{
|
|
platform_driver_unregister(&palmas_driver);
|
|
}
|
|
module_exit(palmas_exit);
|
|
|
|
MODULE_AUTHOR("Graeme Gregory <gg@slimlogic.co.uk>");
|
|
MODULE_DESCRIPTION("Palmas voltage regulator driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:palmas-pmic");
|
|
MODULE_DEVICE_TABLE(of, of_palmas_match_tbl);
|