1
linux/arch/arm/mach-omap2
Paul Walmsley 38698bef54 OMAP2+: clockevent: set up GPTIMER clockevent hwmod right before timer init
Set up the GPTIMER hwmod used for the clockevent source immediately
before it is used.  This avoids the need to set up all of the hwmods
until the boot process is further along.  (In general, we want to defer
as much as possible until late in the boot process.)

This second version fixes a bug pointed out by Santosh Shilimkar
<santosh.shilimkar@ti.com>, that would cause the kernel to use an
incorrect timer hwmod name if the selected GPTIMER was not 1 or 12 -
thanks Santosh.  Also, Tarun Kanti DebBarma <tarun.kanti@ti.com>
pointed out that the original patch did not apply cleanly; this has
now been fixed.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Tarun Kanti DebBarma <tarun.kanti@ti.com>
2011-02-28 14:04:35 -07:00
..
include/mach TI816X: Add low level debug support 2011-02-16 08:31:53 -08:00
board-2430sdp.c OMAP2: add regulator for MMC1 2011-02-22 08:37:03 -08:00
board-3430sdp.c Merge branch 'for-tony' of git://gitorious.org/linux-omap-dss2/linux into omap-for-linus 2011-02-23 12:06:28 -08:00
board-3630sdp.c omap3630: nand: fix device size to work in polled mode 2011-02-17 15:32:52 -08:00
board-4430sdp.c Merge branches 'devel-cleanup', 'devel-omap4', 'devel-board' and 'devel-nand' into omap-for-linus 2011-02-23 11:43:15 -08:00
board-am3517crane.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-am3517evm.c OMAP2, 3: DSS2: board files: replace platform_device_register with omap_display_init() 2011-02-23 09:34:25 +02:00
board-apollon.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-cm-t35.c OMAP2, 3: DSS2: board files: replace platform_device_register with omap_display_init() 2011-02-23 09:34:25 +02:00
board-cm-t3517.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-devkit8000.c OMAP2, 3: DSS2: board files: replace platform_device_register with omap_display_init() 2011-02-23 09:34:25 +02:00
board-flash.c Merge branches 'devel-cleanup', 'devel-omap4', 'devel-board' and 'devel-nand' into omap-for-linus 2011-02-23 11:43:15 -08:00
board-flash.h omap3630: nand: fix device size to work in polled mode 2011-02-17 15:32:52 -08:00
board-generic.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-h4.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-igep0020.c OMAP2, 3: DSS2: board files: replace platform_device_register with omap_display_init() 2011-02-23 09:34:25 +02:00
board-igep0030.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-ldp.c omap3630: nand: fix device size to work in polled mode 2011-02-17 15:32:52 -08:00
board-n8x0.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-omap3beagle.c OMAP2, 3: DSS2: board files: replace platform_device_register with omap_display_init() 2011-02-23 09:34:25 +02:00
board-omap3evm.c Merge branch 'for-tony' of git://gitorious.org/linux-omap-dss2/linux into omap-for-linus 2011-02-23 12:06:28 -08:00
board-omap3logic.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-omap3pandora.c OMAP2, 3: DSS2: board files: replace platform_device_register with omap_display_init() 2011-02-23 09:34:25 +02:00
board-omap3stalker.c OMAP2, 3: DSS2: board files: replace platform_device_register with omap_display_init() 2011-02-23 09:34:25 +02:00
board-omap3touchbook.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-omap4panda.c omap: panda: add mmc5/wl1271 device support 2011-02-22 08:37:03 -08:00
board-overo.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-rm680.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-rx51-peripherals.c omap: rx51: Add vdda_dac supply for tvout 2010-12-22 11:06:24 -08:00
board-rx51-video.c OMAP2, 3: DSS2: board files: replace platform_device_register with omap_display_init() 2011-02-23 09:34:25 +02:00
board-rx51.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-ti8168evm.c TI816X: Update to use init_early 2011-02-16 08:45:46 -08:00
board-zoom-debugboard.c OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
board-zoom-display.c OMAP2, 3: DSS2: board files: replace platform_device_register with omap_display_init() 2011-02-23 09:34:25 +02:00
board-zoom-peripherals.c Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2011-01-14 13:13:07 -08:00
board-zoom.c omap3630: nand: fix device size to work in polled mode 2011-02-17 15:32:52 -08:00
clkt2xxx_apll.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
clkt2xxx_dpllcore.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
clkt2xxx_osc.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clkt2xxx_sys.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clkt2xxx_virt_prcm_set.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
clkt34xx_dpll3m2.c
clkt_clksel.c arm: omap2: clksel: fix compile warningOrganization: Texas Instruments\n 2011-02-16 17:49:35 -08:00
clkt_dpll.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clock2xxx.c
clock2xxx.h omap: Start using CONFIG_SOC_OMAP 2011-01-27 16:39:40 -08:00
clock3xxx_data.c TI816X: Update common OMAP machine specific sources 2011-02-16 08:31:39 -08:00
clock3xxx.c OMAP3: clock: fix incorrect rate display when switching MPU rate at boot 2010-12-21 21:08:14 -07:00
clock3xxx.h
clock34xx.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clock34xx.h
clock36xx.c
clock36xx.h
clock44xx_data.c OMAP: PRCM: remove duplicated headers 2011-01-18 12:36:53 -07:00
clock44xx.h
clock2420_data.c Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 2011-01-07 13:16:28 -08:00
clock2430_data.c Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 2011-01-07 13:16:28 -08:00
clock2430.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clock3517.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clock3517.h
clock_common_data.c
clock.c OMAP2+: clockdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:15 -07:00
clock.h OMAP: clock: fix configuration of J-Type DPLLs to work for OMAP3 and OMAP4 2010-12-21 21:31:43 -07:00
clockdomain.c OMAP4: clockdomain: bypass unimplemented wake-up dependency functions on OMAP4 2011-01-18 12:36:53 -07:00
clockdomain.h omap2plus: clockdomain: Trivial fix for build break because of clktrctrl_mask 2011-01-07 13:33:08 -08:00
clockdomains2xxx_3xxx_data.c omap: Start using CONFIG_SOC_OMAP 2011-01-27 16:39:40 -08:00
clockdomains44xx_data.c OMAP: PRCM: remove duplicated headers 2011-01-18 12:36:53 -07:00
cm1_44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
cm2_44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
cm2xxx_3xxx.c OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some direct CM register accesses 2010-12-21 21:05:15 -07:00
cm2xxx_3xxx.h OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some direct CM register accesses 2010-12-21 21:05:15 -07:00
cm44xx.c OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
cm44xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
cm-regbits-24xx.h OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some direct CM register accesses 2010-12-21 21:05:15 -07:00
cm-regbits-34xx.h OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support 2010-12-21 21:05:15 -07:00
cm-regbits-44xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
cm.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
cminst44xx.c OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support 2010-12-21 21:05:15 -07:00
cminst44xx.h OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support 2010-12-21 21:05:15 -07:00
common.c Merge branches 'devel-cleanup', 'devel-board', 'devel-early-init' and 'devel-ti816x' into omap-for-linus 2011-02-16 11:32:38 -08:00
control.c OMAP3: control/PM: move padconf save code to mach-omap2/control.c 2010-12-21 21:05:16 -07:00
control.h TI816X: Update common OMAP machine specific sources 2011-02-16 08:31:39 -08:00
cpuidle34xx.c Merge branch 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6 2011-01-13 20:15:18 -08:00
devices.c Merge branches 'devel-cleanup', 'devel-omap4', 'devel-board' and 'devel-nand' into omap-for-linus 2011-02-23 11:43:15 -08:00
display.c OMAP2, 3: DSS2: Create new file display.c for central dss driver registration. 2011-02-23 09:33:27 +02:00
dma.c arch/arm/mach-omap2/dma.c: Convert IS_ERR result to PTR_ERR 2011-01-27 16:25:35 -08:00
dpll3xxx.c Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2011-01-06 19:13:58 -08:00
dsp.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
emu.c
gpio.c OMAP2+: GPIO: device registration 2010-12-07 16:26:57 -08:00
gpmc-nand.c omap3630: nand: fix device size to work in polled mode 2011-02-17 15:32:52 -08:00
gpmc-onenand.c OMAP: OneNAND: let boards determine OneNAND frequency 2011-02-17 15:44:46 -08:00
gpmc-smc91x.c
gpmc-smsc911x.c ARM: OMAP3LOGIC: Add generic smsc911x support when connected to GPMC 2010-09-28 11:39:18 -07:00
gpmc.c omap3: nand: configurable fifo threshold to gain the throughput 2011-02-17 15:32:54 -08:00
hsmmc.c OMAP: hsmmc: Enable MMC4 and MMC5 on OMAP4 platforms 2011-02-22 08:37:03 -08:00
hsmmc.h Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2010-10-25 13:46:56 -07:00
hwspinlock.c omap: add hwspinlock device 2011-02-17 09:52:43 -08:00
i2c.c
id.c omap: Add chip id recognition for OMAP4 ES2.1 and ES2.2 2011-02-17 16:16:35 -08:00
io.c omap: gpmc: enable irq mode in gpmc 2011-02-17 15:32:53 -08:00
io.h OMAP: plat-omap: Fix static function warnings 2010-10-08 10:12:38 -07:00
iommu2.c
irq.c Merge branches 'devel-cleanup', 'devel-board', 'devel-early-init' and 'devel-ti816x' into omap-for-linus 2011-02-16 11:32:38 -08:00
Kconfig omap: select REGULATOR_FIXED_VOLTAGE by default for panda and sdp4430 2011-02-22 08:37:03 -08:00
mailbox.c omap: Start using CONFIG_SOC_OMAP 2011-01-27 16:39:40 -08:00
Makefile OMAP2, 3: DSS2: Create new file display.c for central dss driver registration. 2011-02-23 09:33:27 +02:00
Makefile.boot
mcbsp.c omap: Start using CONFIG_SOC_OMAP 2011-01-27 16:39:40 -08:00
mux34xx.c omap3|4: mux: make local structures static 2011-01-06 19:58:28 -08:00
mux34xx.h
mux44xx.c omap3|4: mux: make local structures static 2011-01-06 19:58:28 -08:00
mux44xx.h OMAP4: mux: Add CBS package data for OMAP4430 ES2 2010-11-17 12:01:52 +01:00
mux2420.c OMAP: mux: Add __func__ macro to pr_xxx macros 2010-11-17 12:01:54 +01:00
mux2420.h
mux2430.c OMAP: mux: Add __func__ macro to pr_xxx macros 2010-11-17 12:01:54 +01:00
mux2430.h
mux.c arm: mach-omap2: mux: free allocated memory on error exit 2011-02-01 15:51:36 -08:00
mux.h omap2+: Add struct omap_board_data and use it for platform level serial init 2010-12-22 18:42:35 -08:00
omap4-common.c Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2011-01-06 19:13:58 -08:00
omap44xx-smc.S
omap_hwmod_3xxx_data.c OMAP2+: hwmod: rename some init functions 2011-02-28 12:04:35 -07:00
omap_hwmod_44xx_data.c OMAP2+: hwmod: rename some init functions 2011-02-28 12:04:35 -07:00
omap_hwmod_2420_data.c OMAP2+: hwmod: rename some init functions 2011-02-28 12:04:35 -07:00
omap_hwmod_2430_data.c OMAP2+: hwmod: rename some init functions 2011-02-28 12:04:35 -07:00
omap_hwmod_common_data.c
omap_hwmod_common_data.h
omap_hwmod.c OMAP2+: hwmod: add ability to setup individual hwmods 2011-02-28 13:55:08 -07:00
omap_opp_data.h omap: opp: add OMAP3 OPP table data and common init 2010-12-21 14:30:40 -08:00
omap_phy_internal.c usb: musb: AM35x: moving internal phy functions out of usb_musb.c file 2011-02-17 17:35:53 +02:00
omap_twl.c OMAP2+: TWL: include pm header for init protos 2011-01-07 13:33:07 -08:00
omap-headsmp.S
omap-hotplug.c ARM: CPU hotplug: remove bug checks in platform_cpu_die() 2010-12-20 15:09:10 +00:00
omap-iommu.c OMAP: iommu: make iva2 iommu selectable 2010-12-15 11:33:31 -06:00
omap-smp.c Merge branch 'misc' into devel 2011-01-06 22:32:52 +00:00
opp2xxx.h omap: Start using CONFIG_SOC_OMAP 2011-01-27 16:39:40 -08:00
opp3xxx_data.c omap: opp: add OMAP3 OPP table data and common init 2010-12-21 14:30:40 -08:00
opp4xxx_data.c omap4: opp: add OPP table data 2010-12-21 14:30:40 -08:00
opp2420_data.c
opp2430_data.c
opp.c omap: opp: add OMAP3 OPP table data and common init 2010-12-21 14:30:40 -08:00
pm24xx.c console: rename acquire/release_console_sem() to console_lock/unlock() 2011-01-26 10:50:06 +10:00
pm34xx.c Merge branch 'for_2.6.38/pm-fixes' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into devel-fixes 2011-01-31 13:20:26 -08:00
pm44xx.c Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial 2011-01-13 10:05:56 -08:00
pm_bus.c omap2+: pm_bus: make functions used as pointers as static 2011-01-07 13:33:08 -08:00
pm-debug.c OMAP: PM noop: implement context loss count for non-omap_devices 2010-12-21 21:31:55 -07:00
pm.c OMAP4: PM: Program correct init voltages for scalable VDDs 2010-12-22 14:31:48 -08:00
pm.h OMAP4: Register voltage PMIC parameters with the voltage layer 2010-12-22 14:31:45 -08:00
powerdomain2xxx_3xxx.c OMAP: PRCM: remove duplicated headers 2011-01-18 12:36:53 -07:00
powerdomain44xx.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomain-common.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomain.c OMAP2+: powerdomain: add API to get context loss count 2010-12-21 21:31:55 -07:00
powerdomain.h OMAP2+: powerdomain: add API to get context loss count 2010-12-21 21:31:55 -07:00
powerdomains2xxx_3xxx_data.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomains2xxx_3xxx_data.h OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomains2xxx_data.c omap: Start using CONFIG_SOC_OMAP 2011-01-27 16:39:40 -08:00
powerdomains3xxx_data.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomains44xx_data.c OMAP4: powerdomain: Remove L3INIT_PD OFF state 2010-12-21 22:37:28 -07:00
prcm44xx.h OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
prcm_mpu44xx.c OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
prcm_mpu44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
prcm-common.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prcm.c ARM: OMAP: Allow platforms to hook reset cleanly 2011-01-27 16:39:48 -08:00
prm2xxx_3xxx.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
prm2xxx_3xxx.h omap2plus: prm: Trvial build break fix for undefined reference to 'omap2_prm_read_mod_reg' 2011-01-07 13:33:10 -08:00
prm44xx.c OMAP4: PRCM: move global reset function for OMAP4 to an OMAP4-specific file 2010-12-21 21:05:14 -07:00
prm44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
prm-regbits-24xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prm-regbits-34xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prm-regbits-44xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prm.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prminst44xx.c OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
prminst44xx.h OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
scrm44xx.h OMAP4: PRCM: Add SCRM header file 2010-12-21 20:01:54 -07:00
sdram-hynix-h8mbx00u0mer-0em.h
sdram-micron-mt46h32m32lf-6.h
sdram-nokia.c arm: omap: sdram-nokia: add 97.6/195.2 MHz timing data 2010-12-17 15:13:46 -08:00
sdram-nokia.h arm: omap: add sdram-nokia.h 2010-12-17 15:13:44 -08:00
sdram-numonyx-m65kxxxxam.h
sdram-qimonda-hyb18m512160af-6.h
sdrc2xxx.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
sdrc.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
sdrc.h OMAP2+: use global values for the SRAM PA addresses 2010-12-21 14:45:56 -08:00
serial.c OMAP2+: hwmod: rename some init functions 2011-02-28 12:04:35 -07:00
sleep24xx.S
sleep34xx.S OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
smartreflex-class3.c OMAP3: PM: Adding smartreflex class3 driver 2010-12-22 14:31:40 -08:00
smartreflex.c OMAP: PM: SmartReflex: Fix possible null pointer read access 2011-01-31 12:59:15 -08:00
sr_device.c OMAP3+: sr_device: include pm header 2011-01-07 13:33:06 -08:00
sram34xx.S OMAP2/3: SRAM: add comment about crashes during a TLB miss 2010-12-21 21:08:14 -07:00
sram242x.S OMAP2/3: SRAM: add comment about crashes during a TLB miss 2010-12-21 21:08:14 -07:00
sram243x.S OMAP2/3: SRAM: add comment about crashes during a TLB miss 2010-12-21 21:08:14 -07:00
timer-gp.c OMAP2+: clockevent: set up GPTIMER clockevent hwmod right before timer init 2011-02-28 14:04:35 -07:00
timer-gp.h OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
timer-mpu.c
usb-ehci.c arm: omap4: usb: add platform init code for EHCI 2010-12-01 02:42:13 +05:30
usb-fs.c OMAP: control: move plat-omap/control.h to mach-omap2/control.h 2010-10-08 11:40:20 -06:00
usb-musb.c OMAP2+: musb: hwmod adaptation for musb registration 2011-02-17 18:34:00 +02:00
usb-tusb6010.c Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 2011-01-07 13:16:28 -08:00
voltage.c arm: mach-omap2: voltage: debugfs: fix memory leak 2011-01-31 12:59:14 -08:00
wd_timer.c omap2+: wdt: trivial sparse fixes 2011-01-06 19:58:28 -08:00
wd_timer.h OMAP2+: wd_timer: separate watchdog disable code from the rest of mach-omap2/devices.c 2010-12-21 19:56:17 -07:00