NeilBrown d0e260782c md: revert incorrect fix for read error handling in raid1. ... commit 4706b349f was a forward port of a fix that was needed for SLES10. But in fact it is not needed in mainline because the earlier commit dd00a99e7a fixes the same problem in a better way. Further, this commit introduces a bug in the way it interacts with the automatic read-error-correction. If, after a read error is successfully corrected, the same disk is chosen to re-read - the re-read won't be attempted but an error will be returned instead. After reverting that commit, there is the possibility that a read error on a read-only array (where read errors cannot be corrected as that requires a write) will repeatedly read the same device and continue to get an error. So in the "Array is readonly" case, fail the drive immediately on a read error. Signed-off-by: NeilBrown <neilb@suse.de> Cc: stable@kernel.org		2009-12-01 17:30:59 +11:00
..
raid6test	md: drivers/md/unroll.pl replaced with awk analog	2009-10-16 16:25:19 +11:00
.gitignore
bitmap.c	md: remove clumsy usage of do_sync_mapping_range from bitmap code	2009-10-16 15:56:01 +11:00
bitmap.h
dm-bio-record.h
dm-crypt.c	dm table: pass correct dev area size to device_area_is_valid	2009-07-23 20:30:42 +01:00
dm-delay.c	dm table: pass correct dev area size to device_area_is_valid	2009-07-23 20:30:42 +01:00
dm-exception-store.c	dm snapshot: allow chunk size to be less than page size	2009-10-16 23:18:22 +01:00
dm-exception-store.h	dm snapshot: use unsigned integer chunk size	2009-10-16 23:18:17 +01:00
dm-io.c	dm io: retry after barrier error	2009-06-22 10:12:26 +01:00
dm-ioctl.c	Driver-Core: extend devnode callbacks to provide permissions	2009-09-19 12:50:38 -07:00
dm-kcopyd.c
dm-linear.c	dm table: pass correct dev area size to device_area_is_valid	2009-07-23 20:30:42 +01:00
dm-log-userspace-base.c	dm log: userspace fix incorrect luid cast in userspace_ctr	2009-10-16 23:18:15 +01:00
dm-log-userspace-transfer.c	dm/connector: Only process connector packages from privileged processes	2009-10-02 10:54:10 -07:00
dm-log-userspace-transfer.h	dm log: userspace add luid to distinguish between concurrent log instances	2009-09-04 20:40:34 +01:00
dm-log.c	dm log: fix create_log_context to use logical_block_size of log device	2009-06-22 10:12:33 +01:00
dm-mpath.c	[SCSI] scsi_dh: Use scsi_dh_set_params() in multipath.	2009-08-22 17:52:15 -05:00
dm-mpath.h
dm-path-selector.c
dm-path-selector.h	dm mpath: add start_io and nr_bytes to path selectors	2009-06-22 10:12:27 +01:00
dm-queue-length.c	dm mpath: add queue length load balancer	2009-06-22 10:12:27 +01:00
dm-raid1.c	bio: first step in sanitizing the bio->bi_rw flag testing	2009-09-11 14:33:31 +02:00
dm-region-hash.c	dm raid1: keep retrying alloc if mempool_alloc failed	2009-06-22 10:12:13 +01:00
dm-round-robin.c	dm mpath: add start_io and nr_bytes to path selectors	2009-06-22 10:12:27 +01:00
dm-service-time.c	dm mpath: add service time load balancer	2009-06-22 10:12:28 +01:00
dm-snap-persistent.c	dm snapshot: use unsigned integer chunk size	2009-10-16 23:18:17 +01:00
dm-snap-transient.c
dm-snap.c	dm snapshot: use unsigned integer chunk size	2009-10-16 23:18:17 +01:00
dm-stripe.c	block: Optimal I/O limit wrapper	2009-09-14 08:24:52 +02:00
dm-sysfs.c	dm: sysfs add suspended attribute	2009-06-22 10:12:29 +01:00
dm-table.c	dm stripe: expose correct io hints	2009-09-04 20:40:25 +01:00
dm-target.c
dm-uevent.c
dm-uevent.h
dm-zero.c
dm.c	dm: dec_pending needs locking to save error value	2009-10-16 23:18:15 +01:00
dm.h	dm: remove queue next_ordered workaround for barriers	2009-07-23 20:30:40 +01:00
faulty.c
Kconfig	Merge branch 'dmaengine' into async-tx-next	2009-09-08 17:55:21 -07:00
linear.c	md: report device as congested when suspended	2009-09-23 18:10:29 +10:00
linear.h
Makefile	md: drivers/md/unroll.pl replaced with awk analog	2009-10-16 16:25:19 +11:00
md.c	md: allow v0.91 metadata to record devices as being active but not in-sync.	2009-11-13 17:40:48 +11:00
md.h	md: report device as congested when suspended	2009-09-23 18:10:29 +10:00
mktables.c
multipath.c	md: remove unnecessary memset from multipath.	2009-09-23 18:16:31 +10:00
multipath.h
raid0.c	md: report device as congested when suspended	2009-09-23 18:10:29 +10:00
raid0.h
raid1.c	md: revert incorrect fix for read error handling in raid1.	2009-12-01 17:30:59 +11:00
raid1.h
raid5.c	md/raid5: Allow dirty-degraded arrays to be assembled when only party is degraded.	2009-11-13 17:47:00 +11:00
raid5.h	md: fix problems with RAID6 calculations for DDF.	2009-10-16 16:27:34 +11:00
raid6algos.c
raid6altivec.uc	md: drivers/md/unroll.pl replaced with awk analog	2009-10-16 16:25:19 +11:00
raid6int.uc	md: drivers/md/unroll.pl replaced with awk analog	2009-10-16 16:25:19 +11:00
raid6mmx.c
raid6recov.c
raid6sse1.c
raid6sse2.c
raid6x86.h
raid10.c	md: raid1/raid10: handle allocation errors during array setup.	2009-10-16 15:55:44 +11:00
raid10.h
unroll.awk	md: drivers/md/unroll.pl replaced with awk analog	2009-10-16 16:25:19 +11:00