58ee0d3bb1
No code uses these, and the short define names are polluting the global namespace where they collide with things like common irq files. So just punt the damned things. If in the future we need HDMA support, we can make a standalone header for these things. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1381 lines
85 KiB
C
1381 lines
85 KiB
C
/*
|
|
* Copyright 2007-2010 Analog Devices Inc.
|
|
*
|
|
* Licensed under the ADI BSD license or the GPL-2 (or later)
|
|
*/
|
|
|
|
#ifndef _DEF_BF522_H
|
|
#define _DEF_BF522_H
|
|
|
|
/* ************************************************************** */
|
|
/* SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF52x */
|
|
/* ************************************************************** */
|
|
|
|
/* ==== begin from defBF534.h ==== */
|
|
|
|
/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */
|
|
#define PLL_CTL 0xFFC00000 /* PLL Control Register */
|
|
#define PLL_DIV 0xFFC00004 /* PLL Divide Register */
|
|
#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */
|
|
#define PLL_STAT 0xFFC0000C /* PLL Status Register */
|
|
#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count Register */
|
|
#define CHIPID 0xFFC00014 /* Device ID Register */
|
|
|
|
|
|
/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */
|
|
#define SWRST 0xFFC00100 /* Software Reset Register */
|
|
#define SYSCR 0xFFC00104 /* System Configuration Register */
|
|
#define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */
|
|
|
|
#define SIC_IMASK0 0xFFC0010C /* Interrupt Mask Register */
|
|
#define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */
|
|
#define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */
|
|
#define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */
|
|
#define SIC_IAR3 0xFFC0011C /* Interrupt Assignment Register 3 */
|
|
#define SIC_ISR0 0xFFC00120 /* Interrupt Status Register */
|
|
#define SIC_IWR0 0xFFC00124 /* Interrupt Wakeup Register */
|
|
|
|
/* SIC Additions to ADSP-BF52x (0xFFC0014C - 0xFFC00162) */
|
|
#define SIC_IMASK1 0xFFC0014C /* Interrupt Mask register of SIC2 */
|
|
#define SIC_IAR4 0xFFC00150 /* Interrupt Assignment register4 */
|
|
#define SIC_IAR5 0xFFC00154 /* Interrupt Assignment register5 */
|
|
#define SIC_IAR6 0xFFC00158 /* Interrupt Assignment register6 */
|
|
#define SIC_IAR7 0xFFC0015C /* Interrupt Assignment register7 */
|
|
#define SIC_ISR1 0xFFC00160 /* Interrupt Statur register */
|
|
#define SIC_IWR1 0xFFC00164 /* Interrupt Wakeup register */
|
|
|
|
|
|
/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */
|
|
#define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */
|
|
#define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */
|
|
#define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */
|
|
|
|
|
|
/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */
|
|
#define RTC_STAT 0xFFC00300 /* RTC Status Register */
|
|
#define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */
|
|
#define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */
|
|
#define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */
|
|
#define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */
|
|
#define RTC_FAST 0xFFC00314 /* RTC Prescaler Enable Register */
|
|
#define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Alternate Macro */
|
|
|
|
|
|
/* UART0 Controller (0xFFC00400 - 0xFFC004FF) */
|
|
#define UART0_THR 0xFFC00400 /* Transmit Holding register */
|
|
#define UART0_RBR 0xFFC00400 /* Receive Buffer register */
|
|
#define UART0_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */
|
|
#define UART0_IER 0xFFC00404 /* Interrupt Enable Register */
|
|
#define UART0_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */
|
|
#define UART0_IIR 0xFFC00408 /* Interrupt Identification Register */
|
|
#define UART0_LCR 0xFFC0040C /* Line Control Register */
|
|
#define UART0_MCR 0xFFC00410 /* Modem Control Register */
|
|
#define UART0_LSR 0xFFC00414 /* Line Status Register */
|
|
#define UART0_MSR 0xFFC00418 /* Modem Status Register */
|
|
#define UART0_SCR 0xFFC0041C /* SCR Scratch Register */
|
|
#define UART0_GCTL 0xFFC00424 /* Global Control Register */
|
|
|
|
|
|
/* SPI Controller (0xFFC00500 - 0xFFC005FF) */
|
|
#define SPI0_REGBASE 0xFFC00500
|
|
#define SPI_CTL 0xFFC00500 /* SPI Control Register */
|
|
#define SPI_FLG 0xFFC00504 /* SPI Flag register */
|
|
#define SPI_STAT 0xFFC00508 /* SPI Status register */
|
|
#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */
|
|
#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */
|
|
#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */
|
|
#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */
|
|
|
|
|
|
/* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */
|
|
#define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */
|
|
#define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */
|
|
#define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */
|
|
#define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */
|
|
|
|
#define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */
|
|
#define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */
|
|
#define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */
|
|
#define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */
|
|
|
|
#define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */
|
|
#define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */
|
|
#define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */
|
|
#define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */
|
|
|
|
#define TIMER3_CONFIG 0xFFC00630 /* Timer 3 Configuration Register */
|
|
#define TIMER3_COUNTER 0xFFC00634 /* Timer 3 Counter Register */
|
|
#define TIMER3_PERIOD 0xFFC00638 /* Timer 3 Period Register */
|
|
#define TIMER3_WIDTH 0xFFC0063C /* Timer 3 Width Register */
|
|
|
|
#define TIMER4_CONFIG 0xFFC00640 /* Timer 4 Configuration Register */
|
|
#define TIMER4_COUNTER 0xFFC00644 /* Timer 4 Counter Register */
|
|
#define TIMER4_PERIOD 0xFFC00648 /* Timer 4 Period Register */
|
|
#define TIMER4_WIDTH 0xFFC0064C /* Timer 4 Width Register */
|
|
|
|
#define TIMER5_CONFIG 0xFFC00650 /* Timer 5 Configuration Register */
|
|
#define TIMER5_COUNTER 0xFFC00654 /* Timer 5 Counter Register */
|
|
#define TIMER5_PERIOD 0xFFC00658 /* Timer 5 Period Register */
|
|
#define TIMER5_WIDTH 0xFFC0065C /* Timer 5 Width Register */
|
|
|
|
#define TIMER6_CONFIG 0xFFC00660 /* Timer 6 Configuration Register */
|
|
#define TIMER6_COUNTER 0xFFC00664 /* Timer 6 Counter Register */
|
|
#define TIMER6_PERIOD 0xFFC00668 /* Timer 6 Period Register */
|
|
#define TIMER6_WIDTH 0xFFC0066C /* Timer 6 Width Register */
|
|
|
|
#define TIMER7_CONFIG 0xFFC00670 /* Timer 7 Configuration Register */
|
|
#define TIMER7_COUNTER 0xFFC00674 /* Timer 7 Counter Register */
|
|
#define TIMER7_PERIOD 0xFFC00678 /* Timer 7 Period Register */
|
|
#define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */
|
|
|
|
#define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */
|
|
#define TIMER_DISABLE 0xFFC00684 /* Timer Disable Register */
|
|
#define TIMER_STATUS 0xFFC00688 /* Timer Status Register */
|
|
|
|
|
|
/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */
|
|
#define PORTFIO 0xFFC00700 /* Port F I/O Pin State Specify Register */
|
|
#define PORTFIO_CLEAR 0xFFC00704 /* Port F I/O Peripheral Interrupt Clear Register */
|
|
#define PORTFIO_SET 0xFFC00708 /* Port F I/O Peripheral Interrupt Set Register */
|
|
#define PORTFIO_TOGGLE 0xFFC0070C /* Port F I/O Pin State Toggle Register */
|
|
#define PORTFIO_MASKA 0xFFC00710 /* Port F I/O Mask State Specify Interrupt A Register */
|
|
#define PORTFIO_MASKA_CLEAR 0xFFC00714 /* Port F I/O Mask Disable Interrupt A Register */
|
|
#define PORTFIO_MASKA_SET 0xFFC00718 /* Port F I/O Mask Enable Interrupt A Register */
|
|
#define PORTFIO_MASKA_TOGGLE 0xFFC0071C /* Port F I/O Mask Toggle Enable Interrupt A Register */
|
|
#define PORTFIO_MASKB 0xFFC00720 /* Port F I/O Mask State Specify Interrupt B Register */
|
|
#define PORTFIO_MASKB_CLEAR 0xFFC00724 /* Port F I/O Mask Disable Interrupt B Register */
|
|
#define PORTFIO_MASKB_SET 0xFFC00728 /* Port F I/O Mask Enable Interrupt B Register */
|
|
#define PORTFIO_MASKB_TOGGLE 0xFFC0072C /* Port F I/O Mask Toggle Enable Interrupt B Register */
|
|
#define PORTFIO_DIR 0xFFC00730 /* Port F I/O Direction Register */
|
|
#define PORTFIO_POLAR 0xFFC00734 /* Port F I/O Source Polarity Register */
|
|
#define PORTFIO_EDGE 0xFFC00738 /* Port F I/O Source Sensitivity Register */
|
|
#define PORTFIO_BOTH 0xFFC0073C /* Port F I/O Set on BOTH Edges Register */
|
|
#define PORTFIO_INEN 0xFFC00740 /* Port F I/O Input Enable Register */
|
|
|
|
|
|
/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */
|
|
#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */
|
|
#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */
|
|
#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */
|
|
#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */
|
|
#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */
|
|
#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */
|
|
#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */
|
|
#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */
|
|
#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */
|
|
#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */
|
|
#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */
|
|
#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */
|
|
#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */
|
|
#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */
|
|
#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */
|
|
#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */
|
|
#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */
|
|
#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */
|
|
#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */
|
|
#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */
|
|
#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */
|
|
#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */
|
|
|
|
|
|
/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */
|
|
#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */
|
|
#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */
|
|
#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */
|
|
#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */
|
|
#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */
|
|
#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */
|
|
#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */
|
|
#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */
|
|
#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */
|
|
#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */
|
|
#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */
|
|
#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */
|
|
#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */
|
|
#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */
|
|
#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */
|
|
#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */
|
|
#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */
|
|
#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */
|
|
#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */
|
|
#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */
|
|
#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */
|
|
#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */
|
|
|
|
|
|
/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */
|
|
#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */
|
|
#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */
|
|
#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */
|
|
#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */
|
|
#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */
|
|
#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */
|
|
#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */
|
|
|
|
|
|
/* DMA Traffic Control Registers */
|
|
#define DMAC_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */
|
|
#define DMAC_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */
|
|
|
|
/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */
|
|
#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */
|
|
#define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */
|
|
#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */
|
|
#define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */
|
|
#define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */
|
|
#define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */
|
|
#define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */
|
|
#define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */
|
|
#define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */
|
|
#define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */
|
|
#define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */
|
|
#define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */
|
|
#define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */
|
|
|
|
#define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */
|
|
#define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */
|
|
#define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */
|
|
#define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */
|
|
#define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */
|
|
#define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */
|
|
#define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */
|
|
#define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */
|
|
#define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */
|
|
#define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */
|
|
#define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */
|
|
#define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */
|
|
#define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */
|
|
|
|
#define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */
|
|
#define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */
|
|
#define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */
|
|
#define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */
|
|
#define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */
|
|
#define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */
|
|
#define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */
|
|
#define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */
|
|
#define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */
|
|
#define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */
|
|
#define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */
|
|
#define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */
|
|
#define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */
|
|
|
|
#define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */
|
|
#define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */
|
|
#define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */
|
|
#define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */
|
|
#define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */
|
|
#define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */
|
|
#define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */
|
|
#define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */
|
|
#define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */
|
|
#define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */
|
|
#define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */
|
|
#define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */
|
|
#define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */
|
|
|
|
#define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */
|
|
#define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */
|
|
#define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */
|
|
#define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */
|
|
#define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */
|
|
#define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */
|
|
#define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */
|
|
#define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */
|
|
#define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */
|
|
#define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */
|
|
#define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */
|
|
#define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */
|
|
#define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */
|
|
|
|
#define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */
|
|
#define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */
|
|
#define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */
|
|
#define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */
|
|
#define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */
|
|
#define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */
|
|
#define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */
|
|
#define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */
|
|
#define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */
|
|
#define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */
|
|
#define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */
|
|
#define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */
|
|
#define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */
|
|
|
|
#define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */
|
|
#define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */
|
|
#define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */
|
|
#define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */
|
|
#define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */
|
|
#define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */
|
|
#define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */
|
|
#define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */
|
|
#define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */
|
|
#define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */
|
|
#define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */
|
|
#define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */
|
|
#define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */
|
|
|
|
#define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */
|
|
#define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */
|
|
#define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */
|
|
#define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */
|
|
#define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */
|
|
#define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */
|
|
#define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */
|
|
#define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */
|
|
#define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */
|
|
#define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */
|
|
#define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */
|
|
#define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */
|
|
#define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */
|
|
|
|
#define DMA8_NEXT_DESC_PTR 0xFFC00E00 /* DMA Channel 8 Next Descriptor Pointer Register */
|
|
#define DMA8_START_ADDR 0xFFC00E04 /* DMA Channel 8 Start Address Register */
|
|
#define DMA8_CONFIG 0xFFC00E08 /* DMA Channel 8 Configuration Register */
|
|
#define DMA8_X_COUNT 0xFFC00E10 /* DMA Channel 8 X Count Register */
|
|
#define DMA8_X_MODIFY 0xFFC00E14 /* DMA Channel 8 X Modify Register */
|
|
#define DMA8_Y_COUNT 0xFFC00E18 /* DMA Channel 8 Y Count Register */
|
|
#define DMA8_Y_MODIFY 0xFFC00E1C /* DMA Channel 8 Y Modify Register */
|
|
#define DMA8_CURR_DESC_PTR 0xFFC00E20 /* DMA Channel 8 Current Descriptor Pointer Register */
|
|
#define DMA8_CURR_ADDR 0xFFC00E24 /* DMA Channel 8 Current Address Register */
|
|
#define DMA8_IRQ_STATUS 0xFFC00E28 /* DMA Channel 8 Interrupt/Status Register */
|
|
#define DMA8_PERIPHERAL_MAP 0xFFC00E2C /* DMA Channel 8 Peripheral Map Register */
|
|
#define DMA8_CURR_X_COUNT 0xFFC00E30 /* DMA Channel 8 Current X Count Register */
|
|
#define DMA8_CURR_Y_COUNT 0xFFC00E38 /* DMA Channel 8 Current Y Count Register */
|
|
|
|
#define DMA9_NEXT_DESC_PTR 0xFFC00E40 /* DMA Channel 9 Next Descriptor Pointer Register */
|
|
#define DMA9_START_ADDR 0xFFC00E44 /* DMA Channel 9 Start Address Register */
|
|
#define DMA9_CONFIG 0xFFC00E48 /* DMA Channel 9 Configuration Register */
|
|
#define DMA9_X_COUNT 0xFFC00E50 /* DMA Channel 9 X Count Register */
|
|
#define DMA9_X_MODIFY 0xFFC00E54 /* DMA Channel 9 X Modify Register */
|
|
#define DMA9_Y_COUNT 0xFFC00E58 /* DMA Channel 9 Y Count Register */
|
|
#define DMA9_Y_MODIFY 0xFFC00E5C /* DMA Channel 9 Y Modify Register */
|
|
#define DMA9_CURR_DESC_PTR 0xFFC00E60 /* DMA Channel 9 Current Descriptor Pointer Register */
|
|
#define DMA9_CURR_ADDR 0xFFC00E64 /* DMA Channel 9 Current Address Register */
|
|
#define DMA9_IRQ_STATUS 0xFFC00E68 /* DMA Channel 9 Interrupt/Status Register */
|
|
#define DMA9_PERIPHERAL_MAP 0xFFC00E6C /* DMA Channel 9 Peripheral Map Register */
|
|
#define DMA9_CURR_X_COUNT 0xFFC00E70 /* DMA Channel 9 Current X Count Register */
|
|
#define DMA9_CURR_Y_COUNT 0xFFC00E78 /* DMA Channel 9 Current Y Count Register */
|
|
|
|
#define DMA10_NEXT_DESC_PTR 0xFFC00E80 /* DMA Channel 10 Next Descriptor Pointer Register */
|
|
#define DMA10_START_ADDR 0xFFC00E84 /* DMA Channel 10 Start Address Register */
|
|
#define DMA10_CONFIG 0xFFC00E88 /* DMA Channel 10 Configuration Register */
|
|
#define DMA10_X_COUNT 0xFFC00E90 /* DMA Channel 10 X Count Register */
|
|
#define DMA10_X_MODIFY 0xFFC00E94 /* DMA Channel 10 X Modify Register */
|
|
#define DMA10_Y_COUNT 0xFFC00E98 /* DMA Channel 10 Y Count Register */
|
|
#define DMA10_Y_MODIFY 0xFFC00E9C /* DMA Channel 10 Y Modify Register */
|
|
#define DMA10_CURR_DESC_PTR 0xFFC00EA0 /* DMA Channel 10 Current Descriptor Pointer Register */
|
|
#define DMA10_CURR_ADDR 0xFFC00EA4 /* DMA Channel 10 Current Address Register */
|
|
#define DMA10_IRQ_STATUS 0xFFC00EA8 /* DMA Channel 10 Interrupt/Status Register */
|
|
#define DMA10_PERIPHERAL_MAP 0xFFC00EAC /* DMA Channel 10 Peripheral Map Register */
|
|
#define DMA10_CURR_X_COUNT 0xFFC00EB0 /* DMA Channel 10 Current X Count Register */
|
|
#define DMA10_CURR_Y_COUNT 0xFFC00EB8 /* DMA Channel 10 Current Y Count Register */
|
|
|
|
#define DMA11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA Channel 11 Next Descriptor Pointer Register */
|
|
#define DMA11_START_ADDR 0xFFC00EC4 /* DMA Channel 11 Start Address Register */
|
|
#define DMA11_CONFIG 0xFFC00EC8 /* DMA Channel 11 Configuration Register */
|
|
#define DMA11_X_COUNT 0xFFC00ED0 /* DMA Channel 11 X Count Register */
|
|
#define DMA11_X_MODIFY 0xFFC00ED4 /* DMA Channel 11 X Modify Register */
|
|
#define DMA11_Y_COUNT 0xFFC00ED8 /* DMA Channel 11 Y Count Register */
|
|
#define DMA11_Y_MODIFY 0xFFC00EDC /* DMA Channel 11 Y Modify Register */
|
|
#define DMA11_CURR_DESC_PTR 0xFFC00EE0 /* DMA Channel 11 Current Descriptor Pointer Register */
|
|
#define DMA11_CURR_ADDR 0xFFC00EE4 /* DMA Channel 11 Current Address Register */
|
|
#define DMA11_IRQ_STATUS 0xFFC00EE8 /* DMA Channel 11 Interrupt/Status Register */
|
|
#define DMA11_PERIPHERAL_MAP 0xFFC00EEC /* DMA Channel 11 Peripheral Map Register */
|
|
#define DMA11_CURR_X_COUNT 0xFFC00EF0 /* DMA Channel 11 Current X Count Register */
|
|
#define DMA11_CURR_Y_COUNT 0xFFC00EF8 /* DMA Channel 11 Current Y Count Register */
|
|
|
|
#define MDMA_D0_NEXT_DESC_PTR 0xFFC00F00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */
|
|
#define MDMA_D0_START_ADDR 0xFFC00F04 /* MemDMA Stream 0 Destination Start Address Register */
|
|
#define MDMA_D0_CONFIG 0xFFC00F08 /* MemDMA Stream 0 Destination Configuration Register */
|
|
#define MDMA_D0_X_COUNT 0xFFC00F10 /* MemDMA Stream 0 Destination X Count Register */
|
|
#define MDMA_D0_X_MODIFY 0xFFC00F14 /* MemDMA Stream 0 Destination X Modify Register */
|
|
#define MDMA_D0_Y_COUNT 0xFFC00F18 /* MemDMA Stream 0 Destination Y Count Register */
|
|
#define MDMA_D0_Y_MODIFY 0xFFC00F1C /* MemDMA Stream 0 Destination Y Modify Register */
|
|
#define MDMA_D0_CURR_DESC_PTR 0xFFC00F20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */
|
|
#define MDMA_D0_CURR_ADDR 0xFFC00F24 /* MemDMA Stream 0 Destination Current Address Register */
|
|
#define MDMA_D0_IRQ_STATUS 0xFFC00F28 /* MemDMA Stream 0 Destination Interrupt/Status Register */
|
|
#define MDMA_D0_PERIPHERAL_MAP 0xFFC00F2C /* MemDMA Stream 0 Destination Peripheral Map Register */
|
|
#define MDMA_D0_CURR_X_COUNT 0xFFC00F30 /* MemDMA Stream 0 Destination Current X Count Register */
|
|
#define MDMA_D0_CURR_Y_COUNT 0xFFC00F38 /* MemDMA Stream 0 Destination Current Y Count Register */
|
|
|
|
#define MDMA_S0_NEXT_DESC_PTR 0xFFC00F40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */
|
|
#define MDMA_S0_START_ADDR 0xFFC00F44 /* MemDMA Stream 0 Source Start Address Register */
|
|
#define MDMA_S0_CONFIG 0xFFC00F48 /* MemDMA Stream 0 Source Configuration Register */
|
|
#define MDMA_S0_X_COUNT 0xFFC00F50 /* MemDMA Stream 0 Source X Count Register */
|
|
#define MDMA_S0_X_MODIFY 0xFFC00F54 /* MemDMA Stream 0 Source X Modify Register */
|
|
#define MDMA_S0_Y_COUNT 0xFFC00F58 /* MemDMA Stream 0 Source Y Count Register */
|
|
#define MDMA_S0_Y_MODIFY 0xFFC00F5C /* MemDMA Stream 0 Source Y Modify Register */
|
|
#define MDMA_S0_CURR_DESC_PTR 0xFFC00F60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */
|
|
#define MDMA_S0_CURR_ADDR 0xFFC00F64 /* MemDMA Stream 0 Source Current Address Register */
|
|
#define MDMA_S0_IRQ_STATUS 0xFFC00F68 /* MemDMA Stream 0 Source Interrupt/Status Register */
|
|
#define MDMA_S0_PERIPHERAL_MAP 0xFFC00F6C /* MemDMA Stream 0 Source Peripheral Map Register */
|
|
#define MDMA_S0_CURR_X_COUNT 0xFFC00F70 /* MemDMA Stream 0 Source Current X Count Register */
|
|
#define MDMA_S0_CURR_Y_COUNT 0xFFC00F78 /* MemDMA Stream 0 Source Current Y Count Register */
|
|
|
|
#define MDMA_D1_NEXT_DESC_PTR 0xFFC00F80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */
|
|
#define MDMA_D1_START_ADDR 0xFFC00F84 /* MemDMA Stream 1 Destination Start Address Register */
|
|
#define MDMA_D1_CONFIG 0xFFC00F88 /* MemDMA Stream 1 Destination Configuration Register */
|
|
#define MDMA_D1_X_COUNT 0xFFC00F90 /* MemDMA Stream 1 Destination X Count Register */
|
|
#define MDMA_D1_X_MODIFY 0xFFC00F94 /* MemDMA Stream 1 Destination X Modify Register */
|
|
#define MDMA_D1_Y_COUNT 0xFFC00F98 /* MemDMA Stream 1 Destination Y Count Register */
|
|
#define MDMA_D1_Y_MODIFY 0xFFC00F9C /* MemDMA Stream 1 Destination Y Modify Register */
|
|
#define MDMA_D1_CURR_DESC_PTR 0xFFC00FA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */
|
|
#define MDMA_D1_CURR_ADDR 0xFFC00FA4 /* MemDMA Stream 1 Destination Current Address Register */
|
|
#define MDMA_D1_IRQ_STATUS 0xFFC00FA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */
|
|
#define MDMA_D1_PERIPHERAL_MAP 0xFFC00FAC /* MemDMA Stream 1 Destination Peripheral Map Register */
|
|
#define MDMA_D1_CURR_X_COUNT 0xFFC00FB0 /* MemDMA Stream 1 Destination Current X Count Register */
|
|
#define MDMA_D1_CURR_Y_COUNT 0xFFC00FB8 /* MemDMA Stream 1 Destination Current Y Count Register */
|
|
|
|
#define MDMA_S1_NEXT_DESC_PTR 0xFFC00FC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */
|
|
#define MDMA_S1_START_ADDR 0xFFC00FC4 /* MemDMA Stream 1 Source Start Address Register */
|
|
#define MDMA_S1_CONFIG 0xFFC00FC8 /* MemDMA Stream 1 Source Configuration Register */
|
|
#define MDMA_S1_X_COUNT 0xFFC00FD0 /* MemDMA Stream 1 Source X Count Register */
|
|
#define MDMA_S1_X_MODIFY 0xFFC00FD4 /* MemDMA Stream 1 Source X Modify Register */
|
|
#define MDMA_S1_Y_COUNT 0xFFC00FD8 /* MemDMA Stream 1 Source Y Count Register */
|
|
#define MDMA_S1_Y_MODIFY 0xFFC00FDC /* MemDMA Stream 1 Source Y Modify Register */
|
|
#define MDMA_S1_CURR_DESC_PTR 0xFFC00FE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */
|
|
#define MDMA_S1_CURR_ADDR 0xFFC00FE4 /* MemDMA Stream 1 Source Current Address Register */
|
|
#define MDMA_S1_IRQ_STATUS 0xFFC00FE8 /* MemDMA Stream 1 Source Interrupt/Status Register */
|
|
#define MDMA_S1_PERIPHERAL_MAP 0xFFC00FEC /* MemDMA Stream 1 Source Peripheral Map Register */
|
|
#define MDMA_S1_CURR_X_COUNT 0xFFC00FF0 /* MemDMA Stream 1 Source Current X Count Register */
|
|
#define MDMA_S1_CURR_Y_COUNT 0xFFC00FF8 /* MemDMA Stream 1 Source Current Y Count Register */
|
|
|
|
|
|
/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */
|
|
#define PPI_CONTROL 0xFFC01000 /* PPI Control Register */
|
|
#define PPI_STATUS 0xFFC01004 /* PPI Status Register */
|
|
#define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */
|
|
#define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */
|
|
#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */
|
|
|
|
|
|
/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */
|
|
#define TWI0_REGBASE 0xFFC01400
|
|
#define TWI0_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */
|
|
#define TWI0_CONTROL 0xFFC01404 /* TWI Control Register */
|
|
#define TWI0_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */
|
|
#define TWI0_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */
|
|
#define TWI0_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */
|
|
#define TWI0_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */
|
|
#define TWI0_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */
|
|
#define TWI0_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */
|
|
#define TWI0_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */
|
|
#define TWI0_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */
|
|
#define TWI0_FIFO_CTL 0xFFC01428 /* FIFO Control Register */
|
|
#define TWI0_FIFO_STAT 0xFFC0142C /* FIFO Status Register */
|
|
#define TWI0_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */
|
|
#define TWI0_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */
|
|
#define TWI0_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */
|
|
#define TWI0_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */
|
|
|
|
|
|
/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */
|
|
#define PORTGIO 0xFFC01500 /* Port G I/O Pin State Specify Register */
|
|
#define PORTGIO_CLEAR 0xFFC01504 /* Port G I/O Peripheral Interrupt Clear Register */
|
|
#define PORTGIO_SET 0xFFC01508 /* Port G I/O Peripheral Interrupt Set Register */
|
|
#define PORTGIO_TOGGLE 0xFFC0150C /* Port G I/O Pin State Toggle Register */
|
|
#define PORTGIO_MASKA 0xFFC01510 /* Port G I/O Mask State Specify Interrupt A Register */
|
|
#define PORTGIO_MASKA_CLEAR 0xFFC01514 /* Port G I/O Mask Disable Interrupt A Register */
|
|
#define PORTGIO_MASKA_SET 0xFFC01518 /* Port G I/O Mask Enable Interrupt A Register */
|
|
#define PORTGIO_MASKA_TOGGLE 0xFFC0151C /* Port G I/O Mask Toggle Enable Interrupt A Register */
|
|
#define PORTGIO_MASKB 0xFFC01520 /* Port G I/O Mask State Specify Interrupt B Register */
|
|
#define PORTGIO_MASKB_CLEAR 0xFFC01524 /* Port G I/O Mask Disable Interrupt B Register */
|
|
#define PORTGIO_MASKB_SET 0xFFC01528 /* Port G I/O Mask Enable Interrupt B Register */
|
|
#define PORTGIO_MASKB_TOGGLE 0xFFC0152C /* Port G I/O Mask Toggle Enable Interrupt B Register */
|
|
#define PORTGIO_DIR 0xFFC01530 /* Port G I/O Direction Register */
|
|
#define PORTGIO_POLAR 0xFFC01534 /* Port G I/O Source Polarity Register */
|
|
#define PORTGIO_EDGE 0xFFC01538 /* Port G I/O Source Sensitivity Register */
|
|
#define PORTGIO_BOTH 0xFFC0153C /* Port G I/O Set on BOTH Edges Register */
|
|
#define PORTGIO_INEN 0xFFC01540 /* Port G I/O Input Enable Register */
|
|
|
|
|
|
/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF) */
|
|
#define PORTHIO 0xFFC01700 /* Port H I/O Pin State Specify Register */
|
|
#define PORTHIO_CLEAR 0xFFC01704 /* Port H I/O Peripheral Interrupt Clear Register */
|
|
#define PORTHIO_SET 0xFFC01708 /* Port H I/O Peripheral Interrupt Set Register */
|
|
#define PORTHIO_TOGGLE 0xFFC0170C /* Port H I/O Pin State Toggle Register */
|
|
#define PORTHIO_MASKA 0xFFC01710 /* Port H I/O Mask State Specify Interrupt A Register */
|
|
#define PORTHIO_MASKA_CLEAR 0xFFC01714 /* Port H I/O Mask Disable Interrupt A Register */
|
|
#define PORTHIO_MASKA_SET 0xFFC01718 /* Port H I/O Mask Enable Interrupt A Register */
|
|
#define PORTHIO_MASKA_TOGGLE 0xFFC0171C /* Port H I/O Mask Toggle Enable Interrupt A Register */
|
|
#define PORTHIO_MASKB 0xFFC01720 /* Port H I/O Mask State Specify Interrupt B Register */
|
|
#define PORTHIO_MASKB_CLEAR 0xFFC01724 /* Port H I/O Mask Disable Interrupt B Register */
|
|
#define PORTHIO_MASKB_SET 0xFFC01728 /* Port H I/O Mask Enable Interrupt B Register */
|
|
#define PORTHIO_MASKB_TOGGLE 0xFFC0172C /* Port H I/O Mask Toggle Enable Interrupt B Register */
|
|
#define PORTHIO_DIR 0xFFC01730 /* Port H I/O Direction Register */
|
|
#define PORTHIO_POLAR 0xFFC01734 /* Port H I/O Source Polarity Register */
|
|
#define PORTHIO_EDGE 0xFFC01738 /* Port H I/O Source Sensitivity Register */
|
|
#define PORTHIO_BOTH 0xFFC0173C /* Port H I/O Set on BOTH Edges Register */
|
|
#define PORTHIO_INEN 0xFFC01740 /* Port H I/O Input Enable Register */
|
|
|
|
|
|
/* UART1 Controller (0xFFC02000 - 0xFFC020FF) */
|
|
#define UART1_THR 0xFFC02000 /* Transmit Holding register */
|
|
#define UART1_RBR 0xFFC02000 /* Receive Buffer register */
|
|
#define UART1_DLL 0xFFC02000 /* Divisor Latch (Low-Byte) */
|
|
#define UART1_IER 0xFFC02004 /* Interrupt Enable Register */
|
|
#define UART1_DLH 0xFFC02004 /* Divisor Latch (High-Byte) */
|
|
#define UART1_IIR 0xFFC02008 /* Interrupt Identification Register */
|
|
#define UART1_LCR 0xFFC0200C /* Line Control Register */
|
|
#define UART1_MCR 0xFFC02010 /* Modem Control Register */
|
|
#define UART1_LSR 0xFFC02014 /* Line Status Register */
|
|
#define UART1_MSR 0xFFC02018 /* Modem Status Register */
|
|
#define UART1_SCR 0xFFC0201C /* SCR Scratch Register */
|
|
#define UART1_GCTL 0xFFC02024 /* Global Control Register */
|
|
|
|
|
|
/* Omit CAN register sets from the defBF534.h (CAN is not in the ADSP-BF52x processor) */
|
|
|
|
/* Pin Control Registers (0xFFC03200 - 0xFFC032FF) */
|
|
#define PORTF_FER 0xFFC03200 /* Port F Function Enable Register (Alternate/Flag*) */
|
|
#define PORTG_FER 0xFFC03204 /* Port G Function Enable Register (Alternate/Flag*) */
|
|
#define PORTH_FER 0xFFC03208 /* Port H Function Enable Register (Alternate/Flag*) */
|
|
#define BFIN_PORT_MUX 0xFFC0320C /* Port Multiplexer Control Register */
|
|
|
|
|
|
/* Handshake MDMA Registers (0xFFC03300 - 0xFFC033FF) */
|
|
#define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */
|
|
#define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */
|
|
#define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */
|
|
#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshold Register */
|
|
#define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */
|
|
#define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */
|
|
#define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */
|
|
|
|
#define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */
|
|
#define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */
|
|
#define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */
|
|
#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshold Register */
|
|
#define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */
|
|
#define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */
|
|
#define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */
|
|
|
|
/* GPIO PIN mux (0xFFC03210 - OxFFC03288) */
|
|
#define PORTF_MUX 0xFFC03210 /* Port F mux control */
|
|
#define PORTG_MUX 0xFFC03214 /* Port G mux control */
|
|
#define PORTH_MUX 0xFFC03218 /* Port H mux control */
|
|
#define PORTF_DRIVE 0xFFC03220 /* Port F drive strength control */
|
|
#define PORTG_DRIVE 0xFFC03224 /* Port G drive strength control */
|
|
#define PORTH_DRIVE 0xFFC03228 /* Port H drive strength control */
|
|
#define PORTF_SLEW 0xFFC03230 /* Port F slew control */
|
|
#define PORTG_SLEW 0xFFC03234 /* Port G slew control */
|
|
#define PORTH_SLEW 0xFFC03238 /* Port H slew control */
|
|
#define PORTF_HYSTERISIS 0xFFC03240 /* Port F Schmitt trigger control */
|
|
#define PORTG_HYSTERISIS 0xFFC03244 /* Port G Schmitt trigger control */
|
|
#define PORTH_HYSTERISIS 0xFFC03248 /* Port H Schmitt trigger control */
|
|
#define MISCPORT_DRIVE 0xFFC03280 /* Misc Port drive strength control */
|
|
#define MISCPORT_SLEW 0xFFC03284 /* Misc Port slew control */
|
|
#define MISCPORT_HYSTERISIS 0xFFC03288 /* Misc Port Schmitt trigger control */
|
|
|
|
|
|
/***********************************************************************************
|
|
** System MMR Register Bits And Macros
|
|
**
|
|
** Disclaimer: All macros are intended to make C and Assembly code more readable.
|
|
** Use these macros carefully, as any that do left shifts for field
|
|
** depositing will result in the lower order bits being destroyed. Any
|
|
** macro that shifts left to properly position the bit-field should be
|
|
** used as part of an OR to initialize a register and NOT as a dynamic
|
|
** modifier UNLESS the lower order bits are saved and ORed back in when
|
|
** the macro is used.
|
|
*************************************************************************************/
|
|
|
|
/* CHIPID Masks */
|
|
#define CHIPID_VERSION 0xF0000000
|
|
#define CHIPID_FAMILY 0x0FFFF000
|
|
#define CHIPID_MANUFACTURE 0x00000FFE
|
|
|
|
/* SWRST Masks */
|
|
#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */
|
|
#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */
|
|
#define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */
|
|
#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */
|
|
#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */
|
|
|
|
/* SYSCR Masks */
|
|
#define BMODE 0x0007 /* Boot Mode - Latched During HW Reset From Mode Pins */
|
|
#define NOBOOT 0x0010 /* Execute From L1 or ASYNC Bank 0 When BMODE = 0 */
|
|
|
|
|
|
/* ************* SYSTEM INTERRUPT CONTROLLER MASKS *************************************/
|
|
/* Peripheral Masks For SIC_ISR, SIC_IWR, SIC_IMASK */
|
|
|
|
#if 0
|
|
#define IRQ_PLL_WAKEUP 0x00000001 /* PLL Wakeup Interrupt */
|
|
|
|
#define IRQ_ERROR1 0x00000002 /* Error Interrupt (DMA, DMARx Block, DMARx Overflow) */
|
|
#define IRQ_ERROR2 0x00000004 /* Error Interrupt (CAN, Ethernet, SPORTx, PPI, SPI, UARTx) */
|
|
#define IRQ_RTC 0x00000008 /* Real Time Clock Interrupt */
|
|
#define IRQ_DMA0 0x00000010 /* DMA Channel 0 (PPI) Interrupt */
|
|
#define IRQ_DMA3 0x00000020 /* DMA Channel 3 (SPORT0 RX) Interrupt */
|
|
#define IRQ_DMA4 0x00000040 /* DMA Channel 4 (SPORT0 TX) Interrupt */
|
|
#define IRQ_DMA5 0x00000080 /* DMA Channel 5 (SPORT1 RX) Interrupt */
|
|
|
|
#define IRQ_DMA6 0x00000100 /* DMA Channel 6 (SPORT1 TX) Interrupt */
|
|
#define IRQ_TWI 0x00000200 /* TWI Interrupt */
|
|
#define IRQ_DMA7 0x00000400 /* DMA Channel 7 (SPI) Interrupt */
|
|
#define IRQ_DMA8 0x00000800 /* DMA Channel 8 (UART0 RX) Interrupt */
|
|
#define IRQ_DMA9 0x00001000 /* DMA Channel 9 (UART0 TX) Interrupt */
|
|
#define IRQ_DMA10 0x00002000 /* DMA Channel 10 (UART1 RX) Interrupt */
|
|
#define IRQ_DMA11 0x00004000 /* DMA Channel 11 (UART1 TX) Interrupt */
|
|
#define IRQ_CAN_RX 0x00008000 /* CAN Receive Interrupt */
|
|
|
|
#define IRQ_CAN_TX 0x00010000 /* CAN Transmit Interrupt */
|
|
#define IRQ_DMA1 0x00020000 /* DMA Channel 1 (Ethernet RX) Interrupt */
|
|
#define IRQ_PFA_PORTH 0x00020000 /* PF Port H (PF47:32) Interrupt A */
|
|
#define IRQ_DMA2 0x00040000 /* DMA Channel 2 (Ethernet TX) Interrupt */
|
|
#define IRQ_PFB_PORTH 0x00040000 /* PF Port H (PF47:32) Interrupt B */
|
|
#define IRQ_TIMER0 0x00080000 /* Timer 0 Interrupt */
|
|
#define IRQ_TIMER1 0x00100000 /* Timer 1 Interrupt */
|
|
#define IRQ_TIMER2 0x00200000 /* Timer 2 Interrupt */
|
|
#define IRQ_TIMER3 0x00400000 /* Timer 3 Interrupt */
|
|
#define IRQ_TIMER4 0x00800000 /* Timer 4 Interrupt */
|
|
|
|
#define IRQ_TIMER5 0x01000000 /* Timer 5 Interrupt */
|
|
#define IRQ_TIMER6 0x02000000 /* Timer 6 Interrupt */
|
|
#define IRQ_TIMER7 0x04000000 /* Timer 7 Interrupt */
|
|
#define IRQ_PFA_PORTFG 0x08000000 /* PF Ports F&G (PF31:0) Interrupt A */
|
|
#define IRQ_PFB_PORTF 0x80000000 /* PF Port F (PF15:0) Interrupt B */
|
|
#define IRQ_DMA12 0x20000000 /* DMA Channels 12 (MDMA1 Source) RX Interrupt */
|
|
#define IRQ_DMA13 0x20000000 /* DMA Channels 13 (MDMA1 Destination) TX Interrupt */
|
|
#define IRQ_DMA14 0x40000000 /* DMA Channels 14 (MDMA0 Source) RX Interrupt */
|
|
#define IRQ_DMA15 0x40000000 /* DMA Channels 15 (MDMA0 Destination) TX Interrupt */
|
|
#define IRQ_WDOG 0x80000000 /* Software Watchdog Timer Interrupt */
|
|
#define IRQ_PFB_PORTG 0x10000000 /* PF Port G (PF31:16) Interrupt B */
|
|
#endif
|
|
|
|
/* SIC_IAR0 Macros */
|
|
#define P0_IVG(x) (((x)&0xF)-7) /* Peripheral #0 assigned IVG #x */
|
|
#define P1_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #1 assigned IVG #x */
|
|
#define P2_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #2 assigned IVG #x */
|
|
#define P3_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #3 assigned IVG #x */
|
|
#define P4_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #4 assigned IVG #x */
|
|
#define P5_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #5 assigned IVG #x */
|
|
#define P6_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #6 assigned IVG #x */
|
|
#define P7_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #7 assigned IVG #x */
|
|
|
|
/* SIC_IAR1 Macros */
|
|
#define P8_IVG(x) (((x)&0xF)-7) /* Peripheral #8 assigned IVG #x */
|
|
#define P9_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #9 assigned IVG #x */
|
|
#define P10_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #10 assigned IVG #x */
|
|
#define P11_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #11 assigned IVG #x */
|
|
#define P12_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #12 assigned IVG #x */
|
|
#define P13_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #13 assigned IVG #x */
|
|
#define P14_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #14 assigned IVG #x */
|
|
#define P15_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #15 assigned IVG #x */
|
|
|
|
/* SIC_IAR2 Macros */
|
|
#define P16_IVG(x) (((x)&0xF)-7) /* Peripheral #16 assigned IVG #x */
|
|
#define P17_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #17 assigned IVG #x */
|
|
#define P18_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #18 assigned IVG #x */
|
|
#define P19_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #19 assigned IVG #x */
|
|
#define P20_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #20 assigned IVG #x */
|
|
#define P21_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #21 assigned IVG #x */
|
|
#define P22_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #22 assigned IVG #x */
|
|
#define P23_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #23 assigned IVG #x */
|
|
|
|
/* SIC_IAR3 Macros */
|
|
#define P24_IVG(x) (((x)&0xF)-7) /* Peripheral #24 assigned IVG #x */
|
|
#define P25_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #25 assigned IVG #x */
|
|
#define P26_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #26 assigned IVG #x */
|
|
#define P27_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #27 assigned IVG #x */
|
|
#define P28_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #28 assigned IVG #x */
|
|
#define P29_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #29 assigned IVG #x */
|
|
#define P30_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #30 assigned IVG #x */
|
|
#define P31_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #31 assigned IVG #x */
|
|
|
|
|
|
/* SIC_IMASK Masks */
|
|
#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */
|
|
#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */
|
|
#define SIC_MASK(x) (1 << ((x)&0x1F)) /* Mask Peripheral #x interrupt */
|
|
#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Unmask Peripheral #x interrupt */
|
|
|
|
/* SIC_IWR Masks */
|
|
#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */
|
|
#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */
|
|
#define IWR_ENABLE(x) (1 << ((x)&0x1F)) /* Wakeup Enable Peripheral #x */
|
|
#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Wakeup Disable Peripheral #x */
|
|
|
|
/* **************** GENERAL PURPOSE TIMER MASKS **********************/
|
|
/* TIMER_ENABLE Masks */
|
|
#define TIMEN0 0x0001 /* Enable Timer 0 */
|
|
#define TIMEN1 0x0002 /* Enable Timer 1 */
|
|
#define TIMEN2 0x0004 /* Enable Timer 2 */
|
|
#define TIMEN3 0x0008 /* Enable Timer 3 */
|
|
#define TIMEN4 0x0010 /* Enable Timer 4 */
|
|
#define TIMEN5 0x0020 /* Enable Timer 5 */
|
|
#define TIMEN6 0x0040 /* Enable Timer 6 */
|
|
#define TIMEN7 0x0080 /* Enable Timer 7 */
|
|
|
|
/* TIMER_DISABLE Masks */
|
|
#define TIMDIS0 TIMEN0 /* Disable Timer 0 */
|
|
#define TIMDIS1 TIMEN1 /* Disable Timer 1 */
|
|
#define TIMDIS2 TIMEN2 /* Disable Timer 2 */
|
|
#define TIMDIS3 TIMEN3 /* Disable Timer 3 */
|
|
#define TIMDIS4 TIMEN4 /* Disable Timer 4 */
|
|
#define TIMDIS5 TIMEN5 /* Disable Timer 5 */
|
|
#define TIMDIS6 TIMEN6 /* Disable Timer 6 */
|
|
#define TIMDIS7 TIMEN7 /* Disable Timer 7 */
|
|
|
|
/* TIMER_STATUS Masks */
|
|
#define TIMIL0 0x00000001 /* Timer 0 Interrupt */
|
|
#define TIMIL1 0x00000002 /* Timer 1 Interrupt */
|
|
#define TIMIL2 0x00000004 /* Timer 2 Interrupt */
|
|
#define TIMIL3 0x00000008 /* Timer 3 Interrupt */
|
|
#define TOVF_ERR0 0x00000010 /* Timer 0 Counter Overflow */
|
|
#define TOVF_ERR1 0x00000020 /* Timer 1 Counter Overflow */
|
|
#define TOVF_ERR2 0x00000040 /* Timer 2 Counter Overflow */
|
|
#define TOVF_ERR3 0x00000080 /* Timer 3 Counter Overflow */
|
|
#define TRUN0 0x00001000 /* Timer 0 Slave Enable Status */
|
|
#define TRUN1 0x00002000 /* Timer 1 Slave Enable Status */
|
|
#define TRUN2 0x00004000 /* Timer 2 Slave Enable Status */
|
|
#define TRUN3 0x00008000 /* Timer 3 Slave Enable Status */
|
|
#define TIMIL4 0x00010000 /* Timer 4 Interrupt */
|
|
#define TIMIL5 0x00020000 /* Timer 5 Interrupt */
|
|
#define TIMIL6 0x00040000 /* Timer 6 Interrupt */
|
|
#define TIMIL7 0x00080000 /* Timer 7 Interrupt */
|
|
#define TOVF_ERR4 0x00100000 /* Timer 4 Counter Overflow */
|
|
#define TOVF_ERR5 0x00200000 /* Timer 5 Counter Overflow */
|
|
#define TOVF_ERR6 0x00400000 /* Timer 6 Counter Overflow */
|
|
#define TOVF_ERR7 0x00800000 /* Timer 7 Counter Overflow */
|
|
#define TRUN4 0x10000000 /* Timer 4 Slave Enable Status */
|
|
#define TRUN5 0x20000000 /* Timer 5 Slave Enable Status */
|
|
#define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */
|
|
#define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */
|
|
|
|
/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
|
|
#define TOVL_ERR0 TOVF_ERR0
|
|
#define TOVL_ERR1 TOVF_ERR1
|
|
#define TOVL_ERR2 TOVF_ERR2
|
|
#define TOVL_ERR3 TOVF_ERR3
|
|
#define TOVL_ERR4 TOVF_ERR4
|
|
#define TOVL_ERR5 TOVF_ERR5
|
|
#define TOVL_ERR6 TOVF_ERR6
|
|
#define TOVL_ERR7 TOVF_ERR7
|
|
|
|
/* TIMERx_CONFIG Masks */
|
|
#define PWM_OUT 0x0001 /* Pulse-Width Modulation Output Mode */
|
|
#define WDTH_CAP 0x0002 /* Width Capture Input Mode */
|
|
#define EXT_CLK 0x0003 /* External Clock Mode */
|
|
#define PULSE_HI 0x0004 /* Action Pulse (Positive/Negative*) */
|
|
#define PERIOD_CNT 0x0008 /* Period Count */
|
|
#define IRQ_ENA 0x0010 /* Interrupt Request Enable */
|
|
#define TIN_SEL 0x0020 /* Timer Input Select */
|
|
#define OUT_DIS 0x0040 /* Output Pad Disable */
|
|
#define CLK_SEL 0x0080 /* Timer Clock Select */
|
|
#define TOGGLE_HI 0x0100 /* PWM_OUT PULSE_HI Toggle Mode */
|
|
#define EMU_RUN 0x0200 /* Emulation Behavior Select */
|
|
#define ERR_TYP 0xC000 /* Error Type */
|
|
|
|
/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS *************************/
|
|
/* EBIU_AMGCTL Masks */
|
|
#define AMCKEN 0x0001 /* Enable CLKOUT */
|
|
#define AMBEN_NONE 0x0000 /* All Banks Disabled */
|
|
#define AMBEN_B0 0x0002 /* Enable Async Memory Bank 0 only */
|
|
#define AMBEN_B0_B1 0x0004 /* Enable Async Memory Banks 0 & 1 only */
|
|
#define AMBEN_B0_B1_B2 0x0006 /* Enable Async Memory Banks 0, 1, and 2 */
|
|
#define AMBEN_ALL 0x0008 /* Enable Async Memory Banks (all) 0, 1, 2, and 3 */
|
|
|
|
/* EBIU_AMBCTL0 Masks */
|
|
#define B0RDYEN 0x00000001 /* Bank 0 (B0) RDY Enable */
|
|
#define B0RDYPOL 0x00000002 /* B0 RDY Active High */
|
|
#define B0TT_1 0x00000004 /* B0 Transition Time (Read to Write) = 1 cycle */
|
|
#define B0TT_2 0x00000008 /* B0 Transition Time (Read to Write) = 2 cycles */
|
|
#define B0TT_3 0x0000000C /* B0 Transition Time (Read to Write) = 3 cycles */
|
|
#define B0TT_4 0x00000000 /* B0 Transition Time (Read to Write) = 4 cycles */
|
|
#define B0ST_1 0x00000010 /* B0 Setup Time (AOE to Read/Write) = 1 cycle */
|
|
#define B0ST_2 0x00000020 /* B0 Setup Time (AOE to Read/Write) = 2 cycles */
|
|
#define B0ST_3 0x00000030 /* B0 Setup Time (AOE to Read/Write) = 3 cycles */
|
|
#define B0ST_4 0x00000000 /* B0 Setup Time (AOE to Read/Write) = 4 cycles */
|
|
#define B0HT_1 0x00000040 /* B0 Hold Time (~Read/Write to ~AOE) = 1 cycle */
|
|
#define B0HT_2 0x00000080 /* B0 Hold Time (~Read/Write to ~AOE) = 2 cycles */
|
|
#define B0HT_3 0x000000C0 /* B0 Hold Time (~Read/Write to ~AOE) = 3 cycles */
|
|
#define B0HT_0 0x00000000 /* B0 Hold Time (~Read/Write to ~AOE) = 0 cycles */
|
|
#define B0RAT_1 0x00000100 /* B0 Read Access Time = 1 cycle */
|
|
#define B0RAT_2 0x00000200 /* B0 Read Access Time = 2 cycles */
|
|
#define B0RAT_3 0x00000300 /* B0 Read Access Time = 3 cycles */
|
|
#define B0RAT_4 0x00000400 /* B0 Read Access Time = 4 cycles */
|
|
#define B0RAT_5 0x00000500 /* B0 Read Access Time = 5 cycles */
|
|
#define B0RAT_6 0x00000600 /* B0 Read Access Time = 6 cycles */
|
|
#define B0RAT_7 0x00000700 /* B0 Read Access Time = 7 cycles */
|
|
#define B0RAT_8 0x00000800 /* B0 Read Access Time = 8 cycles */
|
|
#define B0RAT_9 0x00000900 /* B0 Read Access Time = 9 cycles */
|
|
#define B0RAT_10 0x00000A00 /* B0 Read Access Time = 10 cycles */
|
|
#define B0RAT_11 0x00000B00 /* B0 Read Access Time = 11 cycles */
|
|
#define B0RAT_12 0x00000C00 /* B0 Read Access Time = 12 cycles */
|
|
#define B0RAT_13 0x00000D00 /* B0 Read Access Time = 13 cycles */
|
|
#define B0RAT_14 0x00000E00 /* B0 Read Access Time = 14 cycles */
|
|
#define B0RAT_15 0x00000F00 /* B0 Read Access Time = 15 cycles */
|
|
#define B0WAT_1 0x00001000 /* B0 Write Access Time = 1 cycle */
|
|
#define B0WAT_2 0x00002000 /* B0 Write Access Time = 2 cycles */
|
|
#define B0WAT_3 0x00003000 /* B0 Write Access Time = 3 cycles */
|
|
#define B0WAT_4 0x00004000 /* B0 Write Access Time = 4 cycles */
|
|
#define B0WAT_5 0x00005000 /* B0 Write Access Time = 5 cycles */
|
|
#define B0WAT_6 0x00006000 /* B0 Write Access Time = 6 cycles */
|
|
#define B0WAT_7 0x00007000 /* B0 Write Access Time = 7 cycles */
|
|
#define B0WAT_8 0x00008000 /* B0 Write Access Time = 8 cycles */
|
|
#define B0WAT_9 0x00009000 /* B0 Write Access Time = 9 cycles */
|
|
#define B0WAT_10 0x0000A000 /* B0 Write Access Time = 10 cycles */
|
|
#define B0WAT_11 0x0000B000 /* B0 Write Access Time = 11 cycles */
|
|
#define B0WAT_12 0x0000C000 /* B0 Write Access Time = 12 cycles */
|
|
#define B0WAT_13 0x0000D000 /* B0 Write Access Time = 13 cycles */
|
|
#define B0WAT_14 0x0000E000 /* B0 Write Access Time = 14 cycles */
|
|
#define B0WAT_15 0x0000F000 /* B0 Write Access Time = 15 cycles */
|
|
|
|
#define B1RDYEN 0x00010000 /* Bank 1 (B1) RDY Enable */
|
|
#define B1RDYPOL 0x00020000 /* B1 RDY Active High */
|
|
#define B1TT_1 0x00040000 /* B1 Transition Time (Read to Write) = 1 cycle */
|
|
#define B1TT_2 0x00080000 /* B1 Transition Time (Read to Write) = 2 cycles */
|
|
#define B1TT_3 0x000C0000 /* B1 Transition Time (Read to Write) = 3 cycles */
|
|
#define B1TT_4 0x00000000 /* B1 Transition Time (Read to Write) = 4 cycles */
|
|
#define B1ST_1 0x00100000 /* B1 Setup Time (AOE to Read/Write) = 1 cycle */
|
|
#define B1ST_2 0x00200000 /* B1 Setup Time (AOE to Read/Write) = 2 cycles */
|
|
#define B1ST_3 0x00300000 /* B1 Setup Time (AOE to Read/Write) = 3 cycles */
|
|
#define B1ST_4 0x00000000 /* B1 Setup Time (AOE to Read/Write) = 4 cycles */
|
|
#define B1HT_1 0x00400000 /* B1 Hold Time (~Read/Write to ~AOE) = 1 cycle */
|
|
#define B1HT_2 0x00800000 /* B1 Hold Time (~Read/Write to ~AOE) = 2 cycles */
|
|
#define B1HT_3 0x00C00000 /* B1 Hold Time (~Read/Write to ~AOE) = 3 cycles */
|
|
#define B1HT_0 0x00000000 /* B1 Hold Time (~Read/Write to ~AOE) = 0 cycles */
|
|
#define B1RAT_1 0x01000000 /* B1 Read Access Time = 1 cycle */
|
|
#define B1RAT_2 0x02000000 /* B1 Read Access Time = 2 cycles */
|
|
#define B1RAT_3 0x03000000 /* B1 Read Access Time = 3 cycles */
|
|
#define B1RAT_4 0x04000000 /* B1 Read Access Time = 4 cycles */
|
|
#define B1RAT_5 0x05000000 /* B1 Read Access Time = 5 cycles */
|
|
#define B1RAT_6 0x06000000 /* B1 Read Access Time = 6 cycles */
|
|
#define B1RAT_7 0x07000000 /* B1 Read Access Time = 7 cycles */
|
|
#define B1RAT_8 0x08000000 /* B1 Read Access Time = 8 cycles */
|
|
#define B1RAT_9 0x09000000 /* B1 Read Access Time = 9 cycles */
|
|
#define B1RAT_10 0x0A000000 /* B1 Read Access Time = 10 cycles */
|
|
#define B1RAT_11 0x0B000000 /* B1 Read Access Time = 11 cycles */
|
|
#define B1RAT_12 0x0C000000 /* B1 Read Access Time = 12 cycles */
|
|
#define B1RAT_13 0x0D000000 /* B1 Read Access Time = 13 cycles */
|
|
#define B1RAT_14 0x0E000000 /* B1 Read Access Time = 14 cycles */
|
|
#define B1RAT_15 0x0F000000 /* B1 Read Access Time = 15 cycles */
|
|
#define B1WAT_1 0x10000000 /* B1 Write Access Time = 1 cycle */
|
|
#define B1WAT_2 0x20000000 /* B1 Write Access Time = 2 cycles */
|
|
#define B1WAT_3 0x30000000 /* B1 Write Access Time = 3 cycles */
|
|
#define B1WAT_4 0x40000000 /* B1 Write Access Time = 4 cycles */
|
|
#define B1WAT_5 0x50000000 /* B1 Write Access Time = 5 cycles */
|
|
#define B1WAT_6 0x60000000 /* B1 Write Access Time = 6 cycles */
|
|
#define B1WAT_7 0x70000000 /* B1 Write Access Time = 7 cycles */
|
|
#define B1WAT_8 0x80000000 /* B1 Write Access Time = 8 cycles */
|
|
#define B1WAT_9 0x90000000 /* B1 Write Access Time = 9 cycles */
|
|
#define B1WAT_10 0xA0000000 /* B1 Write Access Time = 10 cycles */
|
|
#define B1WAT_11 0xB0000000 /* B1 Write Access Time = 11 cycles */
|
|
#define B1WAT_12 0xC0000000 /* B1 Write Access Time = 12 cycles */
|
|
#define B1WAT_13 0xD0000000 /* B1 Write Access Time = 13 cycles */
|
|
#define B1WAT_14 0xE0000000 /* B1 Write Access Time = 14 cycles */
|
|
#define B1WAT_15 0xF0000000 /* B1 Write Access Time = 15 cycles */
|
|
|
|
/* EBIU_AMBCTL1 Masks */
|
|
#define B2RDYEN 0x00000001 /* Bank 2 (B2) RDY Enable */
|
|
#define B2RDYPOL 0x00000002 /* B2 RDY Active High */
|
|
#define B2TT_1 0x00000004 /* B2 Transition Time (Read to Write) = 1 cycle */
|
|
#define B2TT_2 0x00000008 /* B2 Transition Time (Read to Write) = 2 cycles */
|
|
#define B2TT_3 0x0000000C /* B2 Transition Time (Read to Write) = 3 cycles */
|
|
#define B2TT_4 0x00000000 /* B2 Transition Time (Read to Write) = 4 cycles */
|
|
#define B2ST_1 0x00000010 /* B2 Setup Time (AOE to Read/Write) = 1 cycle */
|
|
#define B2ST_2 0x00000020 /* B2 Setup Time (AOE to Read/Write) = 2 cycles */
|
|
#define B2ST_3 0x00000030 /* B2 Setup Time (AOE to Read/Write) = 3 cycles */
|
|
#define B2ST_4 0x00000000 /* B2 Setup Time (AOE to Read/Write) = 4 cycles */
|
|
#define B2HT_1 0x00000040 /* B2 Hold Time (~Read/Write to ~AOE) = 1 cycle */
|
|
#define B2HT_2 0x00000080 /* B2 Hold Time (~Read/Write to ~AOE) = 2 cycles */
|
|
#define B2HT_3 0x000000C0 /* B2 Hold Time (~Read/Write to ~AOE) = 3 cycles */
|
|
#define B2HT_0 0x00000000 /* B2 Hold Time (~Read/Write to ~AOE) = 0 cycles */
|
|
#define B2RAT_1 0x00000100 /* B2 Read Access Time = 1 cycle */
|
|
#define B2RAT_2 0x00000200 /* B2 Read Access Time = 2 cycles */
|
|
#define B2RAT_3 0x00000300 /* B2 Read Access Time = 3 cycles */
|
|
#define B2RAT_4 0x00000400 /* B2 Read Access Time = 4 cycles */
|
|
#define B2RAT_5 0x00000500 /* B2 Read Access Time = 5 cycles */
|
|
#define B2RAT_6 0x00000600 /* B2 Read Access Time = 6 cycles */
|
|
#define B2RAT_7 0x00000700 /* B2 Read Access Time = 7 cycles */
|
|
#define B2RAT_8 0x00000800 /* B2 Read Access Time = 8 cycles */
|
|
#define B2RAT_9 0x00000900 /* B2 Read Access Time = 9 cycles */
|
|
#define B2RAT_10 0x00000A00 /* B2 Read Access Time = 10 cycles */
|
|
#define B2RAT_11 0x00000B00 /* B2 Read Access Time = 11 cycles */
|
|
#define B2RAT_12 0x00000C00 /* B2 Read Access Time = 12 cycles */
|
|
#define B2RAT_13 0x00000D00 /* B2 Read Access Time = 13 cycles */
|
|
#define B2RAT_14 0x00000E00 /* B2 Read Access Time = 14 cycles */
|
|
#define B2RAT_15 0x00000F00 /* B2 Read Access Time = 15 cycles */
|
|
#define B2WAT_1 0x00001000 /* B2 Write Access Time = 1 cycle */
|
|
#define B2WAT_2 0x00002000 /* B2 Write Access Time = 2 cycles */
|
|
#define B2WAT_3 0x00003000 /* B2 Write Access Time = 3 cycles */
|
|
#define B2WAT_4 0x00004000 /* B2 Write Access Time = 4 cycles */
|
|
#define B2WAT_5 0x00005000 /* B2 Write Access Time = 5 cycles */
|
|
#define B2WAT_6 0x00006000 /* B2 Write Access Time = 6 cycles */
|
|
#define B2WAT_7 0x00007000 /* B2 Write Access Time = 7 cycles */
|
|
#define B2WAT_8 0x00008000 /* B2 Write Access Time = 8 cycles */
|
|
#define B2WAT_9 0x00009000 /* B2 Write Access Time = 9 cycles */
|
|
#define B2WAT_10 0x0000A000 /* B2 Write Access Time = 10 cycles */
|
|
#define B2WAT_11 0x0000B000 /* B2 Write Access Time = 11 cycles */
|
|
#define B2WAT_12 0x0000C000 /* B2 Write Access Time = 12 cycles */
|
|
#define B2WAT_13 0x0000D000 /* B2 Write Access Time = 13 cycles */
|
|
#define B2WAT_14 0x0000E000 /* B2 Write Access Time = 14 cycles */
|
|
#define B2WAT_15 0x0000F000 /* B2 Write Access Time = 15 cycles */
|
|
|
|
#define B3RDYEN 0x00010000 /* Bank 3 (B3) RDY Enable */
|
|
#define B3RDYPOL 0x00020000 /* B3 RDY Active High */
|
|
#define B3TT_1 0x00040000 /* B3 Transition Time (Read to Write) = 1 cycle */
|
|
#define B3TT_2 0x00080000 /* B3 Transition Time (Read to Write) = 2 cycles */
|
|
#define B3TT_3 0x000C0000 /* B3 Transition Time (Read to Write) = 3 cycles */
|
|
#define B3TT_4 0x00000000 /* B3 Transition Time (Read to Write) = 4 cycles */
|
|
#define B3ST_1 0x00100000 /* B3 Setup Time (AOE to Read/Write) = 1 cycle */
|
|
#define B3ST_2 0x00200000 /* B3 Setup Time (AOE to Read/Write) = 2 cycles */
|
|
#define B3ST_3 0x00300000 /* B3 Setup Time (AOE to Read/Write) = 3 cycles */
|
|
#define B3ST_4 0x00000000 /* B3 Setup Time (AOE to Read/Write) = 4 cycles */
|
|
#define B3HT_1 0x00400000 /* B3 Hold Time (~Read/Write to ~AOE) = 1 cycle */
|
|
#define B3HT_2 0x00800000 /* B3 Hold Time (~Read/Write to ~AOE) = 2 cycles */
|
|
#define B3HT_3 0x00C00000 /* B3 Hold Time (~Read/Write to ~AOE) = 3 cycles */
|
|
#define B3HT_0 0x00000000 /* B3 Hold Time (~Read/Write to ~AOE) = 0 cycles */
|
|
#define B3RAT_1 0x01000000 /* B3 Read Access Time = 1 cycle */
|
|
#define B3RAT_2 0x02000000 /* B3 Read Access Time = 2 cycles */
|
|
#define B3RAT_3 0x03000000 /* B3 Read Access Time = 3 cycles */
|
|
#define B3RAT_4 0x04000000 /* B3 Read Access Time = 4 cycles */
|
|
#define B3RAT_5 0x05000000 /* B3 Read Access Time = 5 cycles */
|
|
#define B3RAT_6 0x06000000 /* B3 Read Access Time = 6 cycles */
|
|
#define B3RAT_7 0x07000000 /* B3 Read Access Time = 7 cycles */
|
|
#define B3RAT_8 0x08000000 /* B3 Read Access Time = 8 cycles */
|
|
#define B3RAT_9 0x09000000 /* B3 Read Access Time = 9 cycles */
|
|
#define B3RAT_10 0x0A000000 /* B3 Read Access Time = 10 cycles */
|
|
#define B3RAT_11 0x0B000000 /* B3 Read Access Time = 11 cycles */
|
|
#define B3RAT_12 0x0C000000 /* B3 Read Access Time = 12 cycles */
|
|
#define B3RAT_13 0x0D000000 /* B3 Read Access Time = 13 cycles */
|
|
#define B3RAT_14 0x0E000000 /* B3 Read Access Time = 14 cycles */
|
|
#define B3RAT_15 0x0F000000 /* B3 Read Access Time = 15 cycles */
|
|
#define B3WAT_1 0x10000000 /* B3 Write Access Time = 1 cycle */
|
|
#define B3WAT_2 0x20000000 /* B3 Write Access Time = 2 cycles */
|
|
#define B3WAT_3 0x30000000 /* B3 Write Access Time = 3 cycles */
|
|
#define B3WAT_4 0x40000000 /* B3 Write Access Time = 4 cycles */
|
|
#define B3WAT_5 0x50000000 /* B3 Write Access Time = 5 cycles */
|
|
#define B3WAT_6 0x60000000 /* B3 Write Access Time = 6 cycles */
|
|
#define B3WAT_7 0x70000000 /* B3 Write Access Time = 7 cycles */
|
|
#define B3WAT_8 0x80000000 /* B3 Write Access Time = 8 cycles */
|
|
#define B3WAT_9 0x90000000 /* B3 Write Access Time = 9 cycles */
|
|
#define B3WAT_10 0xA0000000 /* B3 Write Access Time = 10 cycles */
|
|
#define B3WAT_11 0xB0000000 /* B3 Write Access Time = 11 cycles */
|
|
#define B3WAT_12 0xC0000000 /* B3 Write Access Time = 12 cycles */
|
|
#define B3WAT_13 0xD0000000 /* B3 Write Access Time = 13 cycles */
|
|
#define B3WAT_14 0xE0000000 /* B3 Write Access Time = 14 cycles */
|
|
#define B3WAT_15 0xF0000000 /* B3 Write Access Time = 15 cycles */
|
|
|
|
|
|
/* ********************** SDRAM CONTROLLER MASKS **********************************************/
|
|
/* EBIU_SDGCTL Masks */
|
|
#define SCTLE 0x00000001 /* Enable SDRAM Signals */
|
|
#define CL_2 0x00000008 /* SDRAM CAS Latency = 2 cycles */
|
|
#define CL_3 0x0000000C /* SDRAM CAS Latency = 3 cycles */
|
|
#define PASR_ALL 0x00000000 /* All 4 SDRAM Banks Refreshed In Self-Refresh */
|
|
#define PASR_B0_B1 0x00000010 /* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh */
|
|
#define PASR_B0 0x00000020 /* Only SDRAM Bank 0 Is Refreshed In Self-Refresh */
|
|
#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */
|
|
#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */
|
|
#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */
|
|
#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */
|
|
#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */
|
|
#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */
|
|
#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */
|
|
#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */
|
|
#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */
|
|
#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */
|
|
#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */
|
|
#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */
|
|
#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */
|
|
#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */
|
|
#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */
|
|
#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */
|
|
#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */
|
|
#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */
|
|
#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */
|
|
#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */
|
|
#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */
|
|
#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */
|
|
#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */
|
|
#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */
|
|
#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */
|
|
#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */
|
|
#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */
|
|
#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */
|
|
#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */
|
|
#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */
|
|
#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */
|
|
#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */
|
|
#define PUPSD 0x00200000 /* Power-Up Start Delay (15 SCLK Cycles Delay) */
|
|
#define PSM 0x00400000 /* Power-Up Sequence (Mode Register Before/After* Refresh) */
|
|
#define PSS 0x00800000 /* Enable Power-Up Sequence on Next SDRAM Access */
|
|
#define SRFS 0x01000000 /* Enable SDRAM Self-Refresh Mode */
|
|
#define EBUFE 0x02000000 /* Enable External Buffering Timing */
|
|
#define FBBRW 0x04000000 /* Enable Fast Back-To-Back Read To Write */
|
|
#define EMREN 0x10000000 /* Extended Mode Register Enable */
|
|
#define TCSR 0x20000000 /* Temp-Compensated Self-Refresh Value (85/45* Deg C) */
|
|
#define CDDBG 0x40000000 /* Tristate SDRAM Controls During Bus Grant */
|
|
|
|
/* EBIU_SDBCTL Masks */
|
|
#define EBE 0x0001 /* Enable SDRAM External Bank */
|
|
#define EBSZ_16 0x0000 /* SDRAM External Bank Size = 16MB */
|
|
#define EBSZ_32 0x0002 /* SDRAM External Bank Size = 32MB */
|
|
#define EBSZ_64 0x0004 /* SDRAM External Bank Size = 64MB */
|
|
#define EBSZ_128 0x0006 /* SDRAM External Bank Size = 128MB */
|
|
#define EBSZ_256 0x0008 /* SDRAM External Bank Size = 256MB */
|
|
#define EBSZ_512 0x000A /* SDRAM External Bank Size = 512MB */
|
|
#define EBCAW_8 0x0000 /* SDRAM External Bank Column Address Width = 8 Bits */
|
|
#define EBCAW_9 0x0010 /* SDRAM External Bank Column Address Width = 9 Bits */
|
|
#define EBCAW_10 0x0020 /* SDRAM External Bank Column Address Width = 10 Bits */
|
|
#define EBCAW_11 0x0030 /* SDRAM External Bank Column Address Width = 11 Bits */
|
|
|
|
/* EBIU_SDSTAT Masks */
|
|
#define SDCI 0x0001 /* SDRAM Controller Idle */
|
|
#define SDSRA 0x0002 /* SDRAM Self-Refresh Active */
|
|
#define SDPUA 0x0004 /* SDRAM Power-Up Active */
|
|
#define SDRS 0x0008 /* SDRAM Will Power-Up On Next Access */
|
|
#define SDEASE 0x0010 /* SDRAM EAB Sticky Error Status */
|
|
#define BGSTAT 0x0020 /* Bus Grant Status */
|
|
|
|
|
|
/* ************************** DMA CONTROLLER MASKS ********************************/
|
|
|
|
/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
|
|
#define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */
|
|
#define PMAP 0xF000 /* Peripheral Mapped To This Channel */
|
|
#define PMAP_PPI 0x0000 /* PPI Port DMA */
|
|
#define PMAP_EMACRX 0x1000 /* Ethernet Receive DMA */
|
|
#define PMAP_EMACTX 0x2000 /* Ethernet Transmit DMA */
|
|
#define PMAP_SPORT0RX 0x3000 /* SPORT0 Receive DMA */
|
|
#define PMAP_SPORT0TX 0x4000 /* SPORT0 Transmit DMA */
|
|
#define PMAP_SPORT1RX 0x5000 /* SPORT1 Receive DMA */
|
|
#define PMAP_SPORT1TX 0x6000 /* SPORT1 Transmit DMA */
|
|
#define PMAP_SPI 0x7000 /* SPI Port DMA */
|
|
#define PMAP_UART0RX 0x8000 /* UART0 Port Receive DMA */
|
|
#define PMAP_UART0TX 0x9000 /* UART0 Port Transmit DMA */
|
|
#define PMAP_UART1RX 0xA000 /* UART1 Port Receive DMA */
|
|
#define PMAP_UART1TX 0xB000 /* UART1 Port Transmit DMA */
|
|
|
|
/* ************ PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/
|
|
/* PPI_CONTROL Masks */
|
|
#define PORT_EN 0x0001 /* PPI Port Enable */
|
|
#define PORT_DIR 0x0002 /* PPI Port Direction */
|
|
#define XFR_TYPE 0x000C /* PPI Transfer Type */
|
|
#define PORT_CFG 0x0030 /* PPI Port Configuration */
|
|
#define FLD_SEL 0x0040 /* PPI Active Field Select */
|
|
#define PACK_EN 0x0080 /* PPI Packing Mode */
|
|
#define DMA32 0x0100 /* PPI 32-bit DMA Enable */
|
|
#define SKIP_EN 0x0200 /* PPI Skip Element Enable */
|
|
#define SKIP_EO 0x0400 /* PPI Skip Even/Odd Elements */
|
|
#define DLEN_8 0x0000 /* Data Length = 8 Bits */
|
|
#define DLEN_10 0x0800 /* Data Length = 10 Bits */
|
|
#define DLEN_11 0x1000 /* Data Length = 11 Bits */
|
|
#define DLEN_12 0x1800 /* Data Length = 12 Bits */
|
|
#define DLEN_13 0x2000 /* Data Length = 13 Bits */
|
|
#define DLEN_14 0x2800 /* Data Length = 14 Bits */
|
|
#define DLEN_15 0x3000 /* Data Length = 15 Bits */
|
|
#define DLEN_16 0x3800 /* Data Length = 16 Bits */
|
|
#define DLENGTH 0x3800 /* PPI Data Length */
|
|
#define POLC 0x4000 /* PPI Clock Polarity */
|
|
#define POLS 0x8000 /* PPI Frame Sync Polarity */
|
|
|
|
/* PPI_STATUS Masks */
|
|
#define FLD 0x0400 /* Field Indicator */
|
|
#define FT_ERR 0x0800 /* Frame Track Error */
|
|
#define OVR 0x1000 /* FIFO Overflow Error */
|
|
#define UNDR 0x2000 /* FIFO Underrun Error */
|
|
#define ERR_DET 0x4000 /* Error Detected Indicator */
|
|
#define ERR_NCOR 0x8000 /* Error Not Corrected Indicator */
|
|
|
|
|
|
/* ******************** TWO-WIRE INTERFACE (TWI) MASKS ***********************/
|
|
/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */
|
|
#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */
|
|
#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */
|
|
|
|
/* TWI_PRESCALE Masks */
|
|
#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */
|
|
#define TWI_ENA 0x0080 /* TWI Enable */
|
|
#define SCCB 0x0200 /* SCCB Compatibility Enable */
|
|
|
|
/* TWI_SLAVE_CTL Masks */
|
|
#define SEN 0x0001 /* Slave Enable */
|
|
#define SADD_LEN 0x0002 /* Slave Address Length */
|
|
#define STDVAL 0x0004 /* Slave Transmit Data Valid */
|
|
#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
|
|
#define GEN 0x0010 /* General Call Adrress Matching Enabled */
|
|
|
|
/* TWI_SLAVE_STAT Masks */
|
|
#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */
|
|
#define GCALL 0x0002 /* General Call Indicator */
|
|
|
|
/* TWI_MASTER_CTL Masks */
|
|
#define MEN 0x0001 /* Master Mode Enable */
|
|
#define MADD_LEN 0x0002 /* Master Address Length */
|
|
#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */
|
|
#define FAST 0x0008 /* Use Fast Mode Timing Specs */
|
|
#define STOP 0x0010 /* Issue Stop Condition */
|
|
#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */
|
|
#define DCNT 0x3FC0 /* Data Bytes To Transfer */
|
|
#define SDAOVR 0x4000 /* Serial Data Override */
|
|
#define SCLOVR 0x8000 /* Serial Clock Override */
|
|
|
|
/* TWI_MASTER_STAT Masks */
|
|
#define MPROG 0x0001 /* Master Transfer In Progress */
|
|
#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */
|
|
#define ANAK 0x0004 /* Address Not Acknowledged */
|
|
#define DNAK 0x0008 /* Data Not Acknowledged */
|
|
#define BUFRDERR 0x0010 /* Buffer Read Error */
|
|
#define BUFWRERR 0x0020 /* Buffer Write Error */
|
|
#define SDASEN 0x0040 /* Serial Data Sense */
|
|
#define SCLSEN 0x0080 /* Serial Clock Sense */
|
|
#define BUSBUSY 0x0100 /* Bus Busy Indicator */
|
|
|
|
/* TWI_INT_SRC and TWI_INT_ENABLE Masks */
|
|
#define SINIT 0x0001 /* Slave Transfer Initiated */
|
|
#define SCOMP 0x0002 /* Slave Transfer Complete */
|
|
#define SERR 0x0004 /* Slave Transfer Error */
|
|
#define SOVF 0x0008 /* Slave Overflow */
|
|
#define MCOMP 0x0010 /* Master Transfer Complete */
|
|
#define MERR 0x0020 /* Master Transfer Error */
|
|
#define XMTSERV 0x0040 /* Transmit FIFO Service */
|
|
#define RCVSERV 0x0080 /* Receive FIFO Service */
|
|
|
|
/* TWI_FIFO_CTRL Masks */
|
|
#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */
|
|
#define RCVFLUSH 0x0002 /* Receive Buffer Flush */
|
|
#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */
|
|
#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */
|
|
|
|
/* TWI_FIFO_STAT Masks */
|
|
#define XMTSTAT 0x0003 /* Transmit FIFO Status */
|
|
#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */
|
|
#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */
|
|
#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */
|
|
|
|
#define RCVSTAT 0x000C /* Receive FIFO Status */
|
|
#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */
|
|
#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */
|
|
#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */
|
|
|
|
|
|
/* Omit CAN masks from defBF534.h */
|
|
|
|
/* ******************* PIN CONTROL REGISTER MASKS ************************/
|
|
/* PORT_MUX Masks */
|
|
#define PJSE 0x0001 /* Port J SPI/SPORT Enable */
|
|
#define PJSE_SPORT 0x0000 /* Enable TFS0/DT0PRI */
|
|
#define PJSE_SPI 0x0001 /* Enable SPI_SSEL3:2 */
|
|
|
|
#define PJCE(x) (((x)&0x3)<<1) /* Port J CAN/SPI/SPORT Enable */
|
|
#define PJCE_SPORT 0x0000 /* Enable DR0SEC/DT0SEC */
|
|
#define PJCE_CAN 0x0002 /* Enable CAN RX/TX */
|
|
#define PJCE_SPI 0x0004 /* Enable SPI_SSEL7 */
|
|
|
|
#define PFDE 0x0008 /* Port F DMA Request Enable */
|
|
#define PFDE_UART 0x0000 /* Enable UART0 RX/TX */
|
|
#define PFDE_DMA 0x0008 /* Enable DMAR1:0 */
|
|
|
|
#define PFTE 0x0010 /* Port F Timer Enable */
|
|
#define PFTE_UART 0x0000 /* Enable UART1 RX/TX */
|
|
#define PFTE_TIMER 0x0010 /* Enable TMR7:6 */
|
|
|
|
#define PFS6E 0x0020 /* Port F SPI SSEL 6 Enable */
|
|
#define PFS6E_TIMER 0x0000 /* Enable TMR5 */
|
|
#define PFS6E_SPI 0x0020 /* Enable SPI_SSEL6 */
|
|
|
|
#define PFS5E 0x0040 /* Port F SPI SSEL 5 Enable */
|
|
#define PFS5E_TIMER 0x0000 /* Enable TMR4 */
|
|
#define PFS5E_SPI 0x0040 /* Enable SPI_SSEL5 */
|
|
|
|
#define PFS4E 0x0080 /* Port F SPI SSEL 4 Enable */
|
|
#define PFS4E_TIMER 0x0000 /* Enable TMR3 */
|
|
#define PFS4E_SPI 0x0080 /* Enable SPI_SSEL4 */
|
|
|
|
#define PFFE 0x0100 /* Port F PPI Frame Sync Enable */
|
|
#define PFFE_TIMER 0x0000 /* Enable TMR2 */
|
|
#define PFFE_PPI 0x0100 /* Enable PPI FS3 */
|
|
|
|
#define PGSE 0x0200 /* Port G SPORT1 Secondary Enable */
|
|
#define PGSE_PPI 0x0000 /* Enable PPI D9:8 */
|
|
#define PGSE_SPORT 0x0200 /* Enable DR1SEC/DT1SEC */
|
|
|
|
#define PGRE 0x0400 /* Port G SPORT1 Receive Enable */
|
|
#define PGRE_PPI 0x0000 /* Enable PPI D12:10 */
|
|
#define PGRE_SPORT 0x0400 /* Enable DR1PRI/RFS1/RSCLK1 */
|
|
|
|
#define PGTE 0x0800 /* Port G SPORT1 Transmit Enable */
|
|
#define PGTE_PPI 0x0000 /* Enable PPI D15:13 */
|
|
#define PGTE_SPORT 0x0800 /* Enable DT1PRI/TFS1/TSCLK1 */
|
|
|
|
/* entry addresses of the user-callable Boot ROM functions */
|
|
|
|
#define _BOOTROM_RESET 0xEF000000
|
|
#define _BOOTROM_FINAL_INIT 0xEF000002
|
|
#define _BOOTROM_DO_MEMORY_DMA 0xEF000006
|
|
#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008
|
|
#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A
|
|
#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C
|
|
#define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010
|
|
#define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012
|
|
#define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014
|
|
|
|
/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
|
|
#define PGDE_UART PFDE_UART
|
|
#define PGDE_DMA PFDE_DMA
|
|
#define CKELOW SCKELOW
|
|
|
|
/* ==== end from defBF534.h ==== */
|
|
|
|
/* HOST Port Registers */
|
|
|
|
#define HOST_CONTROL 0xffc03400 /* HOST Control Register */
|
|
#define HOST_STATUS 0xffc03404 /* HOST Status Register */
|
|
#define HOST_TIMEOUT 0xffc03408 /* HOST Acknowledge Mode Timeout Register */
|
|
|
|
/* Counter Registers */
|
|
|
|
#define CNT_CONFIG 0xffc03500 /* Configuration Register */
|
|
#define CNT_IMASK 0xffc03504 /* Interrupt Mask Register */
|
|
#define CNT_STATUS 0xffc03508 /* Status Register */
|
|
#define CNT_COMMAND 0xffc0350c /* Command Register */
|
|
#define CNT_DEBOUNCE 0xffc03510 /* Debounce Register */
|
|
#define CNT_COUNTER 0xffc03514 /* Counter Register */
|
|
#define CNT_MAX 0xffc03518 /* Maximal Count Register */
|
|
#define CNT_MIN 0xffc0351c /* Minimal Count Register */
|
|
|
|
/* OTP/FUSE Registers */
|
|
|
|
#define OTP_CONTROL 0xffc03600 /* OTP/Fuse Control Register */
|
|
#define OTP_BEN 0xffc03604 /* OTP/Fuse Byte Enable */
|
|
#define OTP_STATUS 0xffc03608 /* OTP/Fuse Status */
|
|
#define OTP_TIMING 0xffc0360c /* OTP/Fuse Access Timing */
|
|
|
|
/* Security Registers */
|
|
|
|
#define SECURE_SYSSWT 0xffc03620 /* Secure System Switches */
|
|
#define SECURE_CONTROL 0xffc03624 /* Secure Control */
|
|
#define SECURE_STATUS 0xffc03628 /* Secure Status */
|
|
|
|
/* OTP Read/Write Data Buffer Registers */
|
|
|
|
#define OTP_DATA0 0xffc03680 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
|
|
#define OTP_DATA1 0xffc03684 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
|
|
#define OTP_DATA2 0xffc03688 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
|
|
#define OTP_DATA3 0xffc0368c /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
|
|
|
|
/* NFC Registers */
|
|
|
|
#define NFC_CTL 0xffc03700 /* NAND Control Register */
|
|
#define NFC_STAT 0xffc03704 /* NAND Status Register */
|
|
#define NFC_IRQSTAT 0xffc03708 /* NAND Interrupt Status Register */
|
|
#define NFC_IRQMASK 0xffc0370c /* NAND Interrupt Mask Register */
|
|
#define NFC_ECC0 0xffc03710 /* NAND ECC Register 0 */
|
|
#define NFC_ECC1 0xffc03714 /* NAND ECC Register 1 */
|
|
#define NFC_ECC2 0xffc03718 /* NAND ECC Register 2 */
|
|
#define NFC_ECC3 0xffc0371c /* NAND ECC Register 3 */
|
|
#define NFC_COUNT 0xffc03720 /* NAND ECC Count Register */
|
|
#define NFC_RST 0xffc03724 /* NAND ECC Reset Register */
|
|
#define NFC_PGCTL 0xffc03728 /* NAND Page Control Register */
|
|
#define NFC_READ 0xffc0372c /* NAND Read Data Register */
|
|
#define NFC_ADDR 0xffc03740 /* NAND Address Register */
|
|
#define NFC_CMD 0xffc03744 /* NAND Command Register */
|
|
#define NFC_DATA_WR 0xffc03748 /* NAND Data Write Register */
|
|
#define NFC_DATA_RD 0xffc0374c /* NAND Data Read Register */
|
|
|
|
/* ********************************************************** */
|
|
/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */
|
|
/* and MULTI BIT READ MACROS */
|
|
/* ********************************************************** */
|
|
|
|
/* Bit masks for HOST_CONTROL */
|
|
|
|
#define HOST_CNTR_HOST_EN 0x1 /* Host Enable */
|
|
#define HOST_CNTR_nHOST_EN 0x0
|
|
#define HOST_CNTR_HOST_END 0x2 /* Host Endianess */
|
|
#define HOST_CNTR_nHOST_END 0x0
|
|
#define HOST_CNTR_DATA_SIZE 0x4 /* Data Size */
|
|
#define HOST_CNTR_nDATA_SIZE 0x0
|
|
#define HOST_CNTR_HOST_RST 0x8 /* Host Reset */
|
|
#define HOST_CNTR_nHOST_RST 0x0
|
|
#define HOST_CNTR_HRDY_OVR 0x20 /* Host Ready Override */
|
|
#define HOST_CNTR_nHRDY_OVR 0x0
|
|
#define HOST_CNTR_INT_MODE 0x40 /* Interrupt Mode */
|
|
#define HOST_CNTR_nINT_MODE 0x0
|
|
#define HOST_CNTR_BT_EN 0x80 /* Bus Timeout Enable */
|
|
#define HOST_CNTR_ nBT_EN 0x0
|
|
#define HOST_CNTR_EHW 0x100 /* Enable Host Write */
|
|
#define HOST_CNTR_nEHW 0x0
|
|
#define HOST_CNTR_EHR 0x200 /* Enable Host Read */
|
|
#define HOST_CNTR_nEHR 0x0
|
|
#define HOST_CNTR_BDR 0x400 /* Burst DMA Requests */
|
|
#define HOST_CNTR_nBDR 0x0
|
|
|
|
/* Bit masks for HOST_STATUS */
|
|
|
|
#define HOST_STAT_READY 0x1 /* DMA Ready */
|
|
#define HOST_STAT_nREADY 0x0
|
|
#define HOST_STAT_FIFOFULL 0x2 /* FIFO Full */
|
|
#define HOST_STAT_nFIFOFULL 0x0
|
|
#define HOST_STAT_FIFOEMPTY 0x4 /* FIFO Empty */
|
|
#define HOST_STAT_nFIFOEMPTY 0x0
|
|
#define HOST_STAT_COMPLETE 0x8 /* DMA Complete */
|
|
#define HOST_STAT_nCOMPLETE 0x0
|
|
#define HOST_STAT_HSHK 0x10 /* Host Handshake */
|
|
#define HOST_STAT_nHSHK 0x0
|
|
#define HOST_STAT_TIMEOUT 0x20 /* Host Timeout */
|
|
#define HOST_STAT_nTIMEOUT 0x0
|
|
#define HOST_STAT_HIRQ 0x40 /* Host Interrupt Request */
|
|
#define HOST_STAT_nHIRQ 0x0
|
|
#define HOST_STAT_ALLOW_CNFG 0x80 /* Allow New Configuration */
|
|
#define HOST_STAT_nALLOW_CNFG 0x0
|
|
#define HOST_STAT_DMA_DIR 0x100 /* DMA Direction */
|
|
#define HOST_STAT_nDMA_DIR 0x0
|
|
#define HOST_STAT_BTE 0x200 /* Bus Timeout Enabled */
|
|
#define HOST_STAT_nBTE 0x0
|
|
#define HOST_STAT_HOSTRD_DONE 0x8000 /* Host Read Completion Interrupt */
|
|
#define HOST_STAT_nHOSTRD_DONE 0x0
|
|
|
|
/* Bit masks for HOST_TIMEOUT */
|
|
|
|
#define HOST_COUNT_TIMEOUT 0x7ff /* Host Timeout count */
|
|
|
|
/* Bit masks for SECURE_SYSSWT */
|
|
|
|
#define EMUDABL 0x1 /* Emulation Disable. */
|
|
#define nEMUDABL 0x0
|
|
#define RSTDABL 0x2 /* Reset Disable */
|
|
#define nRSTDABL 0x0
|
|
#define L1IDABL 0x1c /* L1 Instruction Memory Disable. */
|
|
#define L1DADABL 0xe0 /* L1 Data Bank A Memory Disable. */
|
|
#define L1DBDABL 0x700 /* L1 Data Bank B Memory Disable. */
|
|
#define DMA0OVR 0x800 /* DMA0 Memory Access Override */
|
|
#define nDMA0OVR 0x0
|
|
#define DMA1OVR 0x1000 /* DMA1 Memory Access Override */
|
|
#define nDMA1OVR 0x0
|
|
#define EMUOVR 0x4000 /* Emulation Override */
|
|
#define nEMUOVR 0x0
|
|
#define OTPSEN 0x8000 /* OTP Secrets Enable. */
|
|
#define nOTPSEN 0x0
|
|
#define L2DABL 0x70000 /* L2 Memory Disable. */
|
|
|
|
/* Bit masks for SECURE_CONTROL */
|
|
|
|
#define SECURE0 0x1 /* SECURE 0 */
|
|
#define nSECURE0 0x0
|
|
#define SECURE1 0x2 /* SECURE 1 */
|
|
#define nSECURE1 0x0
|
|
#define SECURE2 0x4 /* SECURE 2 */
|
|
#define nSECURE2 0x0
|
|
#define SECURE3 0x8 /* SECURE 3 */
|
|
#define nSECURE3 0x0
|
|
|
|
/* Bit masks for SECURE_STATUS */
|
|
|
|
#define SECMODE 0x3 /* Secured Mode Control State */
|
|
#define NMI 0x4 /* Non Maskable Interrupt */
|
|
#define nNMI 0x0
|
|
#define AFVALID 0x8 /* Authentication Firmware Valid */
|
|
#define nAFVALID 0x0
|
|
#define AFEXIT 0x10 /* Authentication Firmware Exit */
|
|
#define nAFEXIT 0x0
|
|
#define SECSTAT 0xe0 /* Secure Status */
|
|
|
|
#endif /* _DEF_BF522_H */
|