a7640bfa10
This driver depends on I2C and uses SMBUS for communication with the host. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
386 lines
9.7 KiB
C
386 lines
9.7 KiB
C
/*
|
|
* Gas Gauge driver for TI's BQ20Z75
|
|
*
|
|
* Copyright (c) 2010, NVIDIA Corporation.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/err.h>
|
|
#include <linux/power_supply.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/slab.h>
|
|
|
|
enum {
|
|
REG_MANUFACTURER_DATA,
|
|
REG_TEMPERATURE,
|
|
REG_VOLTAGE,
|
|
REG_CURRENT,
|
|
REG_CAPACITY,
|
|
REG_TIME_TO_EMPTY,
|
|
REG_TIME_TO_FULL,
|
|
REG_STATUS,
|
|
REG_CYCLE_COUNT,
|
|
REG_SERIAL_NUMBER
|
|
};
|
|
|
|
/* manufacturer access defines */
|
|
#define MANUFACTURER_ACCESS_STATUS 0x0006
|
|
#define MANUFACTURER_ACCESS_SLEEP 0x0011
|
|
|
|
/* battery status value bits */
|
|
#define BATTERY_CHARGING 0x40
|
|
#define BATTERY_FULL_CHARGED 0x20
|
|
#define BATTERY_FULL_DISCHARGED 0x10
|
|
|
|
#define BQ20Z75_DATA(_psp, _addr, _min_value, _max_value) { \
|
|
.psp = _psp, \
|
|
.addr = _addr, \
|
|
.min_value = _min_value, \
|
|
.max_value = _max_value, \
|
|
}
|
|
|
|
static const struct bq20z75_device_data {
|
|
enum power_supply_property psp;
|
|
u8 addr;
|
|
int min_value;
|
|
int max_value;
|
|
} bq20z75_data[] = {
|
|
[REG_MANUFACTURER_DATA] =
|
|
BQ20Z75_DATA(POWER_SUPPLY_PROP_PRESENT, 0x00, 0, 65535),
|
|
[REG_TEMPERATURE] =
|
|
BQ20Z75_DATA(POWER_SUPPLY_PROP_TEMP, 0x08, 0, 65535),
|
|
[REG_VOLTAGE] =
|
|
BQ20Z75_DATA(POWER_SUPPLY_PROP_VOLTAGE_NOW, 0x09, 0, 20000),
|
|
[REG_CURRENT] =
|
|
BQ20Z75_DATA(POWER_SUPPLY_PROP_CURRENT_NOW, 0x0A, -32768,
|
|
32767),
|
|
[REG_CAPACITY] =
|
|
BQ20Z75_DATA(POWER_SUPPLY_PROP_CAPACITY, 0x0E, 0, 100),
|
|
[REG_TIME_TO_EMPTY] =
|
|
BQ20Z75_DATA(POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, 0x12, 0,
|
|
65535),
|
|
[REG_TIME_TO_FULL] =
|
|
BQ20Z75_DATA(POWER_SUPPLY_PROP_TIME_TO_FULL_AVG, 0x13, 0,
|
|
65535),
|
|
[REG_STATUS] =
|
|
BQ20Z75_DATA(POWER_SUPPLY_PROP_STATUS, 0x16, 0, 65535),
|
|
[REG_CYCLE_COUNT] =
|
|
BQ20Z75_DATA(POWER_SUPPLY_PROP_CYCLE_COUNT, 0x17, 0, 65535),
|
|
[REG_SERIAL_NUMBER] =
|
|
BQ20Z75_DATA(POWER_SUPPLY_PROP_SERIAL_NUMBER, 0x1C, 0, 65535),
|
|
};
|
|
|
|
static enum power_supply_property bq20z75_properties[] = {
|
|
POWER_SUPPLY_PROP_STATUS,
|
|
POWER_SUPPLY_PROP_HEALTH,
|
|
POWER_SUPPLY_PROP_PRESENT,
|
|
POWER_SUPPLY_PROP_TECHNOLOGY,
|
|
POWER_SUPPLY_PROP_CYCLE_COUNT,
|
|
POWER_SUPPLY_PROP_VOLTAGE_NOW,
|
|
POWER_SUPPLY_PROP_CURRENT_NOW,
|
|
POWER_SUPPLY_PROP_CAPACITY,
|
|
POWER_SUPPLY_PROP_TEMP,
|
|
POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
|
|
POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
|
|
POWER_SUPPLY_PROP_SERIAL_NUMBER,
|
|
};
|
|
|
|
struct bq20z75_info {
|
|
struct i2c_client *client;
|
|
struct power_supply power_supply;
|
|
};
|
|
|
|
static int bq20z75_get_battery_presence_and_health(
|
|
struct i2c_client *client, enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
s32 ret;
|
|
|
|
/* Write to ManufacturerAccess with
|
|
* ManufacturerAccess command and then
|
|
* read the status */
|
|
ret = i2c_smbus_write_word_data(client,
|
|
bq20z75_data[REG_MANUFACTURER_DATA].addr,
|
|
MANUFACTURER_ACCESS_STATUS);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev,
|
|
"%s: i2c write for battery presence failed\n",
|
|
__func__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = i2c_smbus_read_word_data(client,
|
|
bq20z75_data[REG_MANUFACTURER_DATA].addr);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev,
|
|
"%s: i2c read for battery presence failed\n",
|
|
__func__);
|
|
return -EIO;
|
|
}
|
|
|
|
if (ret < bq20z75_data[REG_MANUFACTURER_DATA].min_value ||
|
|
ret > bq20z75_data[REG_MANUFACTURER_DATA].max_value) {
|
|
val->intval = 0;
|
|
return 0;
|
|
}
|
|
|
|
/* Mask the upper nibble of 2nd byte and
|
|
* lower byte of response then
|
|
* shift the result by 8 to get status*/
|
|
ret &= 0x0F00;
|
|
ret >>= 8;
|
|
if (psp == POWER_SUPPLY_PROP_PRESENT) {
|
|
if (ret == 0x0F)
|
|
/* battery removed */
|
|
val->intval = 0;
|
|
else
|
|
val->intval = 1;
|
|
} else if (psp == POWER_SUPPLY_PROP_HEALTH) {
|
|
if (ret == 0x09)
|
|
val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
|
|
else if (ret == 0x0B)
|
|
val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
|
|
else if (ret == 0x0C)
|
|
val->intval = POWER_SUPPLY_HEALTH_DEAD;
|
|
else
|
|
val->intval = POWER_SUPPLY_HEALTH_GOOD;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bq20z75_get_battery_property(struct i2c_client *client,
|
|
int reg_offset, enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
s32 ret;
|
|
|
|
ret = i2c_smbus_read_word_data(client,
|
|
bq20z75_data[reg_offset].addr);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev,
|
|
"%s: i2c read for %d failed\n", __func__, reg_offset);
|
|
return -EIO;
|
|
}
|
|
|
|
if (ret >= bq20z75_data[reg_offset].min_value &&
|
|
ret <= bq20z75_data[reg_offset].max_value) {
|
|
val->intval = ret;
|
|
if (psp == POWER_SUPPLY_PROP_STATUS) {
|
|
if (ret & BATTERY_CHARGING)
|
|
val->intval = POWER_SUPPLY_STATUS_CHARGING;
|
|
else if (ret & BATTERY_FULL_CHARGED)
|
|
val->intval = POWER_SUPPLY_STATUS_FULL;
|
|
else if (ret & BATTERY_FULL_DISCHARGED)
|
|
val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
|
|
else
|
|
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
|
|
}
|
|
/* bq20z75 provides battery tempreture in 0.1°K
|
|
* so convert it to °C */
|
|
else if (psp == POWER_SUPPLY_PROP_TEMP)
|
|
val->intval = ret - 2731;
|
|
} else {
|
|
if (psp == POWER_SUPPLY_PROP_STATUS)
|
|
val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
|
|
else
|
|
val->intval = 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bq20z75_get_battery_capacity(struct i2c_client *client,
|
|
union power_supply_propval *val)
|
|
{
|
|
s32 ret;
|
|
|
|
ret = i2c_smbus_read_byte_data(client, bq20z75_data[REG_CAPACITY].addr);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev,
|
|
"%s: i2c read for %d failed\n", __func__, REG_CAPACITY);
|
|
return -EIO;
|
|
}
|
|
|
|
/* bq20z75 spec says that this can be >100 %
|
|
* even if max value is 100 % */
|
|
val->intval = min(ret, 100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bq20z75_get_property(struct power_supply *psy,
|
|
enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
int count;
|
|
int ret;
|
|
struct bq20z75_info *bq20z75_device = container_of(psy,
|
|
struct bq20z75_info, power_supply);
|
|
struct i2c_client *client = bq20z75_device->client;
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_PRESENT:
|
|
case POWER_SUPPLY_PROP_HEALTH:
|
|
ret = bq20z75_get_battery_presence_and_health(client, psp, val);
|
|
if (ret)
|
|
return ret;
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_TECHNOLOGY:
|
|
val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_CAPACITY:
|
|
ret = bq20z75_get_battery_capacity(client, val);
|
|
if (ret)
|
|
return ret;
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_STATUS:
|
|
case POWER_SUPPLY_PROP_CYCLE_COUNT:
|
|
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
|
|
case POWER_SUPPLY_PROP_CURRENT_NOW:
|
|
case POWER_SUPPLY_PROP_TEMP:
|
|
case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
|
|
case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
|
|
case POWER_SUPPLY_PROP_SERIAL_NUMBER:
|
|
for (count = 0; count < ARRAY_SIZE(bq20z75_data); count++) {
|
|
if (psp == bq20z75_data[count].psp)
|
|
break;
|
|
}
|
|
|
|
ret = bq20z75_get_battery_property(client, count, psp, val);
|
|
if (ret)
|
|
return ret;
|
|
break;
|
|
|
|
default:
|
|
dev_err(&client->dev,
|
|
"%s: INVALID property\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev_dbg(&client->dev,
|
|
"%s: property = %d, value = %d\n", __func__, psp, val->intval);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bq20z75_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct bq20z75_info *bq20z75_device;
|
|
int rc;
|
|
|
|
bq20z75_device = kzalloc(sizeof(struct bq20z75_info), GFP_KERNEL);
|
|
if (!bq20z75_device)
|
|
return -ENOMEM;
|
|
|
|
bq20z75_device->client = client;
|
|
bq20z75_device->power_supply.name = "battery";
|
|
bq20z75_device->power_supply.type = POWER_SUPPLY_TYPE_BATTERY;
|
|
bq20z75_device->power_supply.properties = bq20z75_properties;
|
|
bq20z75_device->power_supply.num_properties =
|
|
ARRAY_SIZE(bq20z75_properties);
|
|
bq20z75_device->power_supply.get_property = bq20z75_get_property;
|
|
|
|
i2c_set_clientdata(client, bq20z75_device);
|
|
|
|
rc = power_supply_register(&client->dev, &bq20z75_device->power_supply);
|
|
if (rc) {
|
|
dev_err(&client->dev,
|
|
"%s: Failed to register power supply\n", __func__);
|
|
kfree(bq20z75_device);
|
|
return rc;
|
|
}
|
|
|
|
dev_info(&client->dev,
|
|
"%s: battery gas gauge device registered\n", client->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bq20z75_remove(struct i2c_client *client)
|
|
{
|
|
struct bq20z75_info *bq20z75_device = i2c_get_clientdata(client);
|
|
|
|
power_supply_unregister(&bq20z75_device->power_supply);
|
|
kfree(bq20z75_device);
|
|
bq20z75_device = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined CONFIG_PM
|
|
static int bq20z75_suspend(struct i2c_client *client,
|
|
pm_message_t state)
|
|
{
|
|
s32 ret;
|
|
|
|
/* write to manufacturer access with sleep command */
|
|
ret = i2c_smbus_write_word_data(client,
|
|
bq20z75_data[REG_MANUFACTURER_DATA].addr,
|
|
MANUFACTURER_ACCESS_SLEEP);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev,
|
|
"%s: i2c write for %d failed\n",
|
|
__func__, MANUFACTURER_ACCESS_SLEEP);
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
#define bq20z75_suspend NULL
|
|
#endif
|
|
/* any smbus transaction will wake up bq20z75 */
|
|
#define bq20z75_resume NULL
|
|
|
|
static const struct i2c_device_id bq20z75_id[] = {
|
|
{ "bq20z75", 0 },
|
|
{}
|
|
};
|
|
|
|
static struct i2c_driver bq20z75_battery_driver = {
|
|
.probe = bq20z75_probe,
|
|
.remove = bq20z75_remove,
|
|
.suspend = bq20z75_suspend,
|
|
.resume = bq20z75_resume,
|
|
.id_table = bq20z75_id,
|
|
.driver = {
|
|
.name = "bq20z75-battery",
|
|
},
|
|
};
|
|
|
|
static int __init bq20z75_battery_init(void)
|
|
{
|
|
return i2c_add_driver(&bq20z75_battery_driver);
|
|
}
|
|
module_init(bq20z75_battery_init);
|
|
|
|
static void __exit bq20z75_battery_exit(void)
|
|
{
|
|
i2c_del_driver(&bq20z75_battery_driver);
|
|
}
|
|
module_exit(bq20z75_battery_exit);
|
|
|
|
MODULE_DESCRIPTION("BQ20z75 battery monitor driver");
|
|
MODULE_LICENSE("GPL");
|