1
linux/arch/arm/mach-omap2/omap-wakeupgen.c
Santosh Shilimkar 0f3cf2ec81 ARM: OMAP4: PM: Add WakeupGen and secure GIC low power support
Add WakeupGen and secure GIC low power support to save and restore
it's registers. WakeupGen Registers are saved to pre-defined SAR RAM layout
and the restore is automatically done by hardware(ROM code) while coming
out of MPUSS OSWR or Device off state. Secure GIC is saved using secure
API and restored by hardware like WakeupGen.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Vishwanath BS <vishwanath.bs@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-12-08 11:29:01 -08:00

390 lines
9.6 KiB
C

/*
* OMAP WakeupGen Source file
*
* OMAP WakeupGen is the interrupt controller extension used along
* with ARM GIC to wake the CPU out from low power states on
* external interrupts. It is responsible for generating wakeup
* event from the incoming interrupts and enable bits. It is
* implemented in MPU always ON power domain. During normal operation,
* WakeupGen delivers external interrupts directly to the GIC.
*
* Copyright (C) 2011 Texas Instruments, Inc.
* Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/cpu.h>
#include <linux/notifier.h>
#include <linux/cpu_pm.h>
#include <asm/hardware/gic.h>
#include <mach/omap-wakeupgen.h>
#include <mach/omap-secure.h>
#include "omap4-sar-layout.h"
#include "common.h"
#define NR_REG_BANKS 4
#define MAX_IRQS 128
#define WKG_MASK_ALL 0x00000000
#define WKG_UNMASK_ALL 0xffffffff
#define CPU_ENA_OFFSET 0x400
#define CPU0_ID 0x0
#define CPU1_ID 0x1
static void __iomem *wakeupgen_base;
static void __iomem *sar_base;
static DEFINE_PER_CPU(u32 [NR_REG_BANKS], irqmasks);
static DEFINE_SPINLOCK(wakeupgen_lock);
static unsigned int irq_target_cpu[NR_IRQS];
/*
* Static helper functions.
*/
static inline u32 wakeupgen_readl(u8 idx, u32 cpu)
{
return __raw_readl(wakeupgen_base + OMAP_WKG_ENB_A_0 +
(cpu * CPU_ENA_OFFSET) + (idx * 4));
}
static inline void wakeupgen_writel(u32 val, u8 idx, u32 cpu)
{
__raw_writel(val, wakeupgen_base + OMAP_WKG_ENB_A_0 +
(cpu * CPU_ENA_OFFSET) + (idx * 4));
}
static inline void sar_writel(u32 val, u32 offset, u8 idx)
{
__raw_writel(val, sar_base + offset + (idx * 4));
}
static void _wakeupgen_set_all(unsigned int cpu, unsigned int reg)
{
u8 i;
for (i = 0; i < NR_REG_BANKS; i++)
wakeupgen_writel(reg, i, cpu);
}
static inline int _wakeupgen_get_irq_info(u32 irq, u32 *bit_posn, u8 *reg_index)
{
unsigned int spi_irq;
/*
* PPIs and SGIs are not supported.
*/
if (irq < OMAP44XX_IRQ_GIC_START)
return -EINVAL;
/*
* Subtract the GIC offset.
*/
spi_irq = irq - OMAP44XX_IRQ_GIC_START;
if (spi_irq > MAX_IRQS) {
pr_err("omap wakeupGen: Invalid IRQ%d\n", irq);
return -EINVAL;
}
/*
* Each WakeupGen register controls 32 interrupt.
* i.e. 1 bit per SPI IRQ
*/
*reg_index = spi_irq >> 5;
*bit_posn = spi_irq %= 32;
return 0;
}
static void _wakeupgen_clear(unsigned int irq, unsigned int cpu)
{
u32 val, bit_number;
u8 i;
if (_wakeupgen_get_irq_info(irq, &bit_number, &i))
return;
val = wakeupgen_readl(i, cpu);
val &= ~BIT(bit_number);
wakeupgen_writel(val, i, cpu);
}
static void _wakeupgen_set(unsigned int irq, unsigned int cpu)
{
u32 val, bit_number;
u8 i;
if (_wakeupgen_get_irq_info(irq, &bit_number, &i))
return;
val = wakeupgen_readl(i, cpu);
val |= BIT(bit_number);
wakeupgen_writel(val, i, cpu);
}
static void _wakeupgen_save_masks(unsigned int cpu)
{
u8 i;
for (i = 0; i < NR_REG_BANKS; i++)
per_cpu(irqmasks, cpu)[i] = wakeupgen_readl(i, cpu);
}
static void _wakeupgen_restore_masks(unsigned int cpu)
{
u8 i;
for (i = 0; i < NR_REG_BANKS; i++)
wakeupgen_writel(per_cpu(irqmasks, cpu)[i], i, cpu);
}
/*
* Architecture specific Mask extension
*/
static void wakeupgen_mask(struct irq_data *d)
{
unsigned long flags;
spin_lock_irqsave(&wakeupgen_lock, flags);
_wakeupgen_clear(d->irq, irq_target_cpu[d->irq]);
spin_unlock_irqrestore(&wakeupgen_lock, flags);
}
/*
* Architecture specific Unmask extension
*/
static void wakeupgen_unmask(struct irq_data *d)
{
unsigned long flags;
spin_lock_irqsave(&wakeupgen_lock, flags);
_wakeupgen_set(d->irq, irq_target_cpu[d->irq]);
spin_unlock_irqrestore(&wakeupgen_lock, flags);
}
/*
* Mask or unmask all interrupts on given CPU.
* 0 = Mask all interrupts on the 'cpu'
* 1 = Unmask all interrupts on the 'cpu'
* Ensure that the initial mask is maintained. This is faster than
* iterating through GIC registers to arrive at the correct masks.
*/
static void wakeupgen_irqmask_all(unsigned int cpu, unsigned int set)
{
unsigned long flags;
spin_lock_irqsave(&wakeupgen_lock, flags);
if (set) {
_wakeupgen_save_masks(cpu);
_wakeupgen_set_all(cpu, WKG_MASK_ALL);
} else {
_wakeupgen_set_all(cpu, WKG_UNMASK_ALL);
_wakeupgen_restore_masks(cpu);
}
spin_unlock_irqrestore(&wakeupgen_lock, flags);
}
#ifdef CONFIG_CPU_PM
/*
* Save WakeupGen interrupt context in SAR BANK3. Restore is done by
* ROM code. WakeupGen IP is integrated along with GIC to manage the
* interrupt wakeups from CPU low power states. It manages
* masking/unmasking of Shared peripheral interrupts(SPI). So the
* interrupt enable/disable control should be in sync and consistent
* at WakeupGen and GIC so that interrupts are not lost.
*/
static void irq_save_context(void)
{
u32 i, val;
if (omap_rev() == OMAP4430_REV_ES1_0)
return;
if (!sar_base)
sar_base = omap4_get_sar_ram_base();
for (i = 0; i < NR_REG_BANKS; i++) {
/* Save the CPUx interrupt mask for IRQ 0 to 127 */
val = wakeupgen_readl(i, 0);
sar_writel(val, WAKEUPGENENB_OFFSET_CPU0, i);
val = wakeupgen_readl(i, 1);
sar_writel(val, WAKEUPGENENB_OFFSET_CPU1, i);
/*
* Disable the secure interrupts for CPUx. The restore
* code blindly restores secure and non-secure interrupt
* masks from SAR RAM. Secure interrupts are not suppose
* to be enabled from HLOS. So overwrite the SAR location
* so that the secure interrupt remains disabled.
*/
sar_writel(0x0, WAKEUPGENENB_SECURE_OFFSET_CPU0, i);
sar_writel(0x0, WAKEUPGENENB_SECURE_OFFSET_CPU1, i);
}
/* Save AuxBoot* registers */
val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
__raw_writel(val, sar_base + AUXCOREBOOT0_OFFSET);
val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
__raw_writel(val, sar_base + AUXCOREBOOT1_OFFSET);
/* Save SyncReq generation logic */
val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
__raw_writel(val, sar_base + AUXCOREBOOT0_OFFSET);
val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
__raw_writel(val, sar_base + AUXCOREBOOT1_OFFSET);
/* Save SyncReq generation logic */
val = __raw_readl(wakeupgen_base + OMAP_PTMSYNCREQ_MASK);
__raw_writel(val, sar_base + PTMSYNCREQ_MASK_OFFSET);
val = __raw_readl(wakeupgen_base + OMAP_PTMSYNCREQ_EN);
__raw_writel(val, sar_base + PTMSYNCREQ_EN_OFFSET);
/* Set the Backup Bit Mask status */
val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET);
val |= SAR_BACKUP_STATUS_WAKEUPGEN;
__raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET);
}
/*
* Clear WakeupGen SAR backup status.
*/
void irq_sar_clear(void)
{
u32 val;
val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET);
val &= ~SAR_BACKUP_STATUS_WAKEUPGEN;
__raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET);
}
/*
* Save GIC and Wakeupgen interrupt context using secure API
* for HS/EMU devices.
*/
static void irq_save_secure_context(void)
{
u32 ret;
ret = omap_secure_dispatcher(OMAP4_HAL_SAVEGIC_INDEX,
FLAG_START_CRITICAL,
0, 0, 0, 0, 0);
if (ret != API_HAL_RET_VALUE_OK)
pr_err("GIC and Wakeupgen context save failed\n");
}
#endif
#ifdef CONFIG_HOTPLUG_CPU
static int __cpuinit irq_cpu_hotplug_notify(struct notifier_block *self,
unsigned long action, void *hcpu)
{
unsigned int cpu = (unsigned int)hcpu;
switch (action) {
case CPU_ONLINE:
wakeupgen_irqmask_all(cpu, 0);
break;
case CPU_DEAD:
wakeupgen_irqmask_all(cpu, 1);
break;
}
return NOTIFY_OK;
}
static struct notifier_block __refdata irq_hotplug_notifier = {
.notifier_call = irq_cpu_hotplug_notify,
};
static void __init irq_hotplug_init(void)
{
register_hotcpu_notifier(&irq_hotplug_notifier);
}
#else
static void __init irq_hotplug_init(void)
{}
#endif
#ifdef CONFIG_CPU_PM
static int irq_notifier(struct notifier_block *self, unsigned long cmd, void *v)
{
switch (cmd) {
case CPU_CLUSTER_PM_ENTER:
if (omap_type() == OMAP2_DEVICE_TYPE_GP)
irq_save_context();
else
irq_save_secure_context();
break;
case CPU_CLUSTER_PM_EXIT:
if (omap_type() == OMAP2_DEVICE_TYPE_GP)
irq_sar_clear();
break;
}
return NOTIFY_OK;
}
static struct notifier_block irq_notifier_block = {
.notifier_call = irq_notifier,
};
static void __init irq_pm_init(void)
{
cpu_pm_register_notifier(&irq_notifier_block);
}
#else
static void __init irq_pm_init(void)
{}
#endif
/*
* Initialise the wakeupgen module.
*/
int __init omap_wakeupgen_init(void)
{
int i;
unsigned int boot_cpu = smp_processor_id();
/* Not supported on OMAP4 ES1.0 silicon */
if (omap_rev() == OMAP4430_REV_ES1_0) {
WARN(1, "WakeupGen: Not supported on OMAP4430 ES1.0\n");
return -EPERM;
}
/* Static mapping, never released */
wakeupgen_base = ioremap(OMAP44XX_WKUPGEN_BASE, SZ_4K);
if (WARN_ON(!wakeupgen_base))
return -ENOMEM;
/* Clear all IRQ bitmasks at wakeupGen level */
for (i = 0; i < NR_REG_BANKS; i++) {
wakeupgen_writel(0, i, CPU0_ID);
wakeupgen_writel(0, i, CPU1_ID);
}
/*
* Override GIC architecture specific functions to add
* OMAP WakeupGen interrupt controller along with GIC
*/
gic_arch_extn.irq_mask = wakeupgen_mask;
gic_arch_extn.irq_unmask = wakeupgen_unmask;
gic_arch_extn.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE;
/*
* FIXME: Add support to set_smp_affinity() once the core
* GIC code has necessary hooks in place.
*/
/* Associate all the IRQs to boot CPU like GIC init does. */
for (i = 0; i < NR_IRQS; i++)
irq_target_cpu[i] = boot_cpu;
irq_hotplug_init();
irq_pm_init();
return 0;
}