ff4b8a57f0
This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file, and it fixes the build error in the arch/x86/kernel/microcode_core.c file, that the merge did not catch. The microcode_core.c patch was provided by Stephen Rothwell <sfr@canb.auug.org.au> who was invaluable in the merge issues involved with the large sysdev removal process in the driver-core tree. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
248 lines
7.2 KiB
C
248 lines
7.2 KiB
C
/*
|
|
* derived from linux/arch/arm/mach-versatile/core.c
|
|
* linux/arch/arm/mach-bcmring/core.c
|
|
*
|
|
* Copyright (C) 1999 - 2003 ARM Limited
|
|
* Copyright (C) 2000 Deep Blue Solutions Ltd
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
/* Portions copyright Broadcom 2008 */
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/amba/bus.h>
|
|
#include <linux/clkdev.h>
|
|
|
|
#include <mach/csp/mm_addr.h>
|
|
#include <mach/hardware.h>
|
|
#include <linux/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/hardware/arm_timer.h>
|
|
#include <asm/hardware/timer-sp.h>
|
|
#include <asm/mach-types.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/flash.h>
|
|
#include <asm/mach/irq.h>
|
|
#include <asm/mach/time.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <cfg_global.h>
|
|
|
|
#include "clock.h"
|
|
|
|
#include <csp/secHw.h>
|
|
#include <mach/csp/secHw_def.h>
|
|
#include <mach/csp/chipcHw_inline.h>
|
|
#include <mach/csp/tmrHw_reg.h>
|
|
|
|
#define AMBA_DEVICE(name, initname, base, plat, size) \
|
|
static struct amba_device name##_device = { \
|
|
.dev = { \
|
|
.coherent_dma_mask = ~0, \
|
|
.init_name = initname, \
|
|
.platform_data = plat \
|
|
}, \
|
|
.res = { \
|
|
.start = MM_ADDR_IO_##base, \
|
|
.end = MM_ADDR_IO_##base + (size) - 1, \
|
|
.flags = IORESOURCE_MEM \
|
|
}, \
|
|
.dma_mask = ~0, \
|
|
.irq = { \
|
|
IRQ_##base \
|
|
} \
|
|
}
|
|
|
|
|
|
AMBA_DEVICE(uartA, "uarta", UARTA, NULL, SZ_4K);
|
|
AMBA_DEVICE(uartB, "uartb", UARTB, NULL, SZ_4K);
|
|
|
|
static struct clk pll1_clk = {
|
|
.name = "PLL1",
|
|
.type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL1,
|
|
.rate_hz = 2000000000,
|
|
.use_cnt = 7,
|
|
};
|
|
|
|
static struct clk uart_clk = {
|
|
.name = "UART",
|
|
.type = CLK_TYPE_PROGRAMMABLE,
|
|
.csp_id = chipcHw_CLOCK_UART,
|
|
.rate_hz = HW_CFG_UART_CLK_HZ,
|
|
.parent = &pll1_clk,
|
|
};
|
|
|
|
static struct clk dummy_apb_pclk = {
|
|
.name = "BUSCLK",
|
|
.type = CLK_TYPE_PRIMARY,
|
|
.mode = CLK_MODE_XTAL,
|
|
};
|
|
|
|
/* Timer 0 - 25 MHz, Timer3 at bus clock rate, typically 150-166 MHz */
|
|
#if defined(CONFIG_ARCH_FPGA11107)
|
|
/* fpga cpu/bus are currently 30 times slower so scale frequency as well to */
|
|
/* slow down Linux's sense of time */
|
|
#define TIMER0_FREQUENCY_MHZ (tmrHw_LOW_FREQUENCY_MHZ * 30)
|
|
#define TIMER1_FREQUENCY_MHZ (tmrHw_LOW_FREQUENCY_MHZ * 30)
|
|
#define TIMER3_FREQUENCY_MHZ (tmrHw_HIGH_FREQUENCY_MHZ * 30)
|
|
#define TIMER3_FREQUENCY_KHZ (tmrHw_HIGH_FREQUENCY_HZ / 1000 * 30)
|
|
#else
|
|
#define TIMER0_FREQUENCY_MHZ tmrHw_LOW_FREQUENCY_MHZ
|
|
#define TIMER1_FREQUENCY_MHZ tmrHw_LOW_FREQUENCY_MHZ
|
|
#define TIMER3_FREQUENCY_MHZ tmrHw_HIGH_FREQUENCY_MHZ
|
|
#define TIMER3_FREQUENCY_KHZ (tmrHw_HIGH_FREQUENCY_HZ / 1000)
|
|
#endif
|
|
|
|
static struct clk sp804_timer012_clk = {
|
|
.name = "sp804-timer-0,1,2",
|
|
.type = CLK_TYPE_PRIMARY,
|
|
.mode = CLK_MODE_XTAL,
|
|
.rate_hz = TIMER1_FREQUENCY_MHZ * 1000000,
|
|
};
|
|
|
|
static struct clk sp804_timer3_clk = {
|
|
.name = "sp804-timer-3",
|
|
.type = CLK_TYPE_PRIMARY,
|
|
.mode = CLK_MODE_XTAL,
|
|
.rate_hz = TIMER3_FREQUENCY_KHZ * 1000,
|
|
};
|
|
|
|
static struct clk_lookup lookups[] = {
|
|
{ /* Bus clock */
|
|
.con_id = "apb_pclk",
|
|
.clk = &dummy_apb_pclk,
|
|
}, { /* UART0 */
|
|
.dev_id = "uarta",
|
|
.clk = &uart_clk,
|
|
}, { /* UART1 */
|
|
.dev_id = "uartb",
|
|
.clk = &uart_clk,
|
|
}, { /* SP804 timer 0 */
|
|
.dev_id = "sp804",
|
|
.con_id = "timer0",
|
|
.clk = &sp804_timer012_clk,
|
|
}, { /* SP804 timer 1 */
|
|
.dev_id = "sp804",
|
|
.con_id = "timer1",
|
|
.clk = &sp804_timer012_clk,
|
|
}, { /* SP804 timer 3 */
|
|
.dev_id = "sp804",
|
|
.con_id = "timer3",
|
|
.clk = &sp804_timer3_clk,
|
|
}
|
|
};
|
|
|
|
static struct amba_device *amba_devs[] __initdata = {
|
|
&uartA_device,
|
|
&uartB_device,
|
|
};
|
|
|
|
void __init bcmring_amba_init(void)
|
|
{
|
|
int i;
|
|
u32 bus_clock;
|
|
|
|
/* Linux is run initially in non-secure mode. Secure peripherals */
|
|
/* generate FIQ, and must be handled in secure mode. Until we have */
|
|
/* a linux security monitor implementation, keep everything in */
|
|
/* non-secure mode. */
|
|
chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_SPU);
|
|
secHw_setUnsecure(secHw_BLK_MASK_CHIP_CONTROL |
|
|
secHw_BLK_MASK_KEY_SCAN |
|
|
secHw_BLK_MASK_TOUCH_SCREEN |
|
|
secHw_BLK_MASK_UART0 |
|
|
secHw_BLK_MASK_UART1 |
|
|
secHw_BLK_MASK_WATCHDOG |
|
|
secHw_BLK_MASK_SPUM |
|
|
secHw_BLK_MASK_DDR2 |
|
|
secHw_BLK_MASK_SPU |
|
|
secHw_BLK_MASK_PKA |
|
|
secHw_BLK_MASK_RNG |
|
|
secHw_BLK_MASK_RTC |
|
|
secHw_BLK_MASK_OTP |
|
|
secHw_BLK_MASK_BOOT |
|
|
secHw_BLK_MASK_MPU |
|
|
secHw_BLK_MASK_TZCTRL | secHw_BLK_MASK_INTR);
|
|
|
|
/* Only the devices attached to the AMBA bus are enabled just before the bus is */
|
|
/* scanned and the drivers are loaded. The clocks need to be on for the AMBA bus */
|
|
/* driver to access these blocks. The bus is probed, and the drivers are loaded. */
|
|
/* FIXME Need to remove enable of PIF once CLCD clock enable used properly in FPGA. */
|
|
bus_clock = chipcHw_REG_BUS_CLOCK_GE
|
|
| chipcHw_REG_BUS_CLOCK_SDIO0 | chipcHw_REG_BUS_CLOCK_SDIO1;
|
|
|
|
chipcHw_busInterfaceClockEnable(bus_clock);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
|
|
struct amba_device *d = amba_devs[i];
|
|
amba_device_register(d, &iomem_resource);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Where is the timer (VA)?
|
|
*/
|
|
#define TIMER0_VA_BASE ((void __iomem *)MM_IO_BASE_TMR)
|
|
#define TIMER1_VA_BASE ((void __iomem *)(MM_IO_BASE_TMR + 0x20))
|
|
#define TIMER2_VA_BASE ((void __iomem *)(MM_IO_BASE_TMR + 0x40))
|
|
#define TIMER3_VA_BASE ((void __iomem *)(MM_IO_BASE_TMR + 0x60))
|
|
|
|
static int __init bcmring_clocksource_init(void)
|
|
{
|
|
/* setup timer1 as free-running clocksource */
|
|
sp804_clocksource_init(TIMER1_VA_BASE, "timer1");
|
|
|
|
/* setup timer3 as free-running clocksource */
|
|
sp804_clocksource_init(TIMER3_VA_BASE, "timer3");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set up timer interrupt, and return the current time in seconds.
|
|
*/
|
|
void __init bcmring_init_timer(void)
|
|
{
|
|
printk(KERN_INFO "bcmring_init_timer\n");
|
|
/*
|
|
* Initialise to a known state (all timers off)
|
|
*/
|
|
writel(0, TIMER0_VA_BASE + TIMER_CTRL);
|
|
writel(0, TIMER1_VA_BASE + TIMER_CTRL);
|
|
writel(0, TIMER2_VA_BASE + TIMER_CTRL);
|
|
writel(0, TIMER3_VA_BASE + TIMER_CTRL);
|
|
|
|
/*
|
|
* Make irqs happen for the system timer
|
|
*/
|
|
bcmring_clocksource_init();
|
|
|
|
sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMER0, "timer0");
|
|
}
|
|
|
|
struct sys_timer bcmring_timer = {
|
|
.init = bcmring_init_timer,
|
|
};
|
|
|
|
void __init bcmring_init_early(void)
|
|
{
|
|
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
|
|
}
|