kevin/linux
1
Fork 0
Code
2f34ce81b8
linux/arch/arm/mach-omap2
History
Thara Gopinath 2f34ce81b8 OMAP3: PM: Adding voltage driver support. 
This patch adds voltage driver support for OMAP3. The driver
allows  configuring the voltage controller and voltage
processors during init and exports APIs to enable/disable
voltage processors, scale voltage and reset voltage.
The driver maintains the global voltage table on a per
VDD basis which contains the various voltages supported by the
VDD along with per voltage dependent data like smartreflex
efuse offset, errminlimit and voltage processor errorgain.
The driver also allows the voltage parameters dependent on the
PMIC to be passed from the PMIC file through an API.
The driver allows scaling of VDD voltages either through
"vc bypass method" or through "vp forceupdate method" the
choice being configurable through the board file.

This patch contains code originally in linux omap pm branch
smartreflex driver.  Major contributors to this driver are
Lesly A M, Rajendra Nayak, Kalle Jokiniemi, Paul Walmsley,
Nishant Menon, Kevin Hilman. The separation of PMIC parameters
into a separate structure which can be populated from
the PMIC file is based on the work of Lun Chang from Motorola
in an internal tree.

Signed-off-by: Thara Gopinath <thara@ti.com>
[khilman: fixed link error for OMAP2-only defconfig]
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-22 14:31:02 -08:00
..
include/mach omap2+: Initialize omap_irq_base for entry-macro.S from platform code 2010-12-10 09:42:51 -08:00
board-2430sdp.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-3430sdp.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-3630sdp.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-4430sdp.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-am3517crane.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-am3517evm.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-apollon.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-cm-t35.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-cm-t3517.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-devkit8000.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-flash.c OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
board-flash.h OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
board-generic.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-h4.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-igep0020.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-igep0030.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-ldp.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-n8x0.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-omap3beagle.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-omap3evm.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-omap3logic.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-omap3pandora.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-omap3stalker.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-omap3touchbook.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-omap4panda.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-overo.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-rm680.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-rx51-peripherals.c omap: rx51: Switch rx51_tpa6130a2_data __initdata to__initdata_or_module 2010-12-20 18:48:16 -08:00
board-rx51-video.c Added video data to support tvout on rx51 2010-12-20 18:48:16 -08:00
board-rx51.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
board-zoom-debugboard.c OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
board-zoom-peripherals.c omap: kill all section mismatch warning for omap2plus_defconfig 2010-12-17 17:25:26 -08:00
board-zoom.c OMAP2+: io: split omap2_init_common_hw() 2010-12-21 19:55:11 -07:00
clkt2xxx_apll.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
clkt2xxx_dpllcore.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
clkt2xxx_osc.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clkt2xxx_sys.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clkt2xxx_virt_prcm_set.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
clkt34xx_dpll3m2.c
clkt_clksel.c
clkt_dpll.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clock2xxx.c
clock2xxx.h
clock3xxx_data.c OMAP: clock: fix configuration of J-Type DPLLs to work for OMAP3 and OMAP4 2010-12-21 21:31:43 -07:00
clock3xxx.c OMAP3: clock: fix incorrect rate display when switching MPU rate at boot 2010-12-21 21:08:14 -07:00
clock3xxx.h
clock34xx.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clock34xx.h
clock36xx.c
clock36xx.h
clock44xx_data.c OMAP4: clock data: Add missing fixed divisors 2010-12-22 10:12:46 -07:00
clock44xx.h
clock2420_data.c OMAP2xxx clock: fix dss2_fck recalc to use clksel 2010-12-21 21:08:14 -07:00
clock2430_data.c OMAP2xxx clock: fix dss2_fck recalc to use clksel 2010-12-21 21:08:14 -07:00
clock2430.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clock3517.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clock3517.h
clock_common_data.c
clock.c OMAP2+: clockdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:15 -07:00
clock.h OMAP: clock: fix configuration of J-Type DPLLs to work for OMAP3 and OMAP4 2010-12-21 21:31:43 -07:00
clockdomain.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
clockdomain.h OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
clockdomains2xxx_3xxx_data.c OMAP2+: clockdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:15 -07:00
clockdomains44xx_data.c OMAP2+: clockdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:15 -07:00
cm1_44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
cm2_44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
cm2xxx_3xxx.c OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some direct CM register accesses 2010-12-21 21:05:15 -07:00
cm2xxx_3xxx.h OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some direct CM register accesses 2010-12-21 21:05:15 -07:00
cm44xx.c OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
cm44xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
cm-regbits-24xx.h OMAP2/3: clockdomain: remove unneeded .clkstctrl_reg, remove some direct CM register accesses 2010-12-21 21:05:15 -07:00
cm-regbits-34xx.h OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support 2010-12-21 21:05:15 -07:00
cm-regbits-44xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
cm.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
cminst44xx.c OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support 2010-12-21 21:05:15 -07:00
cminst44xx.h OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support 2010-12-21 21:05:15 -07:00
common.c OMAP: control: move plat-omap/control.h to mach-omap2/control.h 2010-10-08 11:40:20 -06:00
control.c OMAP3: control/PM: move padconf save code to mach-omap2/control.c 2010-12-21 21:05:16 -07:00
control.h OMAP3: PM: Adding voltage driver support. 2010-12-22 14:31:02 -08:00
cpuidle34xx.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
devices.c OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanism 2010-12-21 19:57:40 -07:00
dma.c OMAP: DMA: Convert DMA library into platform driver 2010-12-20 18:38:31 -08:00
dpll3xxx.c OMAP: clock: fix configuration of J-Type DPLLs to work for OMAP3 and OMAP4 2010-12-21 21:31:43 -07:00
dsp.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
emu.c
gpio.c OMAP2+: GPIO: device registration 2010-12-07 16:26:57 -08:00
gpmc-nand.c omap3 nand: cleanup virtual address usages 2010-08-02 15:30:38 +03:00
gpmc-onenand.c
gpmc-smc91x.c
gpmc-smsc911x.c ARM: OMAP3LOGIC: Add generic smsc911x support when connected to GPMC 2010-09-28 11:39:18 -07:00
gpmc.c omap3 nand: cleanup virtual address usages 2010-08-02 15:30:38 +03:00
hsmmc.c OMAP: control: move plat-omap/control.h to mach-omap2/control.h 2010-10-08 11:40:20 -06:00
hsmmc.h Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2010-10-25 13:46:56 -07:00
i2c.c
id.c OMAP: control: move plat-omap/control.h to mach-omap2/control.h 2010-10-08 11:40:20 -06:00
io.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
io.h OMAP: plat-omap: Fix static function warnings 2010-10-08 10:12:38 -07:00
iommu2.c
irq.c OMAP3: add comments for erratas i540 and i478 workarounds 2010-12-17 16:48:20 -08:00
Kconfig omap4: opp: add OPP table data 2010-12-21 14:30:40 -08:00
mailbox.c OMAP: mailbox: fix detection for previously supported chips 2010-12-02 05:43:16 -06:00
Makefile OMAP3: PM: Adding voltage driver support. 2010-12-22 14:31:02 -08:00
Makefile.boot
mcbsp.c OMAP: McBSP: Remove null omap44xx ops comment 2010-10-08 11:40:21 -06:00
mux34xx.c OMAP: mux: Add __func__ macro to pr_xxx macros 2010-11-17 12:01:54 +01:00
mux34xx.h
mux44xx.c OMAP: mux: Add __func__ macro to pr_xxx macros 2010-11-17 12:01:54 +01:00
mux44xx.h OMAP4: mux: Add CBS package data for OMAP4430 ES2 2010-11-17 12:01:52 +01:00
mux2420.c OMAP: mux: Add __func__ macro to pr_xxx macros 2010-11-17 12:01:54 +01:00
mux2420.h
mux2430.c OMAP: mux: Add __func__ macro to pr_xxx macros 2010-11-17 12:01:54 +01:00
mux2430.h
mux.c OMAP: mux: Add __func__ macro to pr_xxx macros 2010-11-17 12:01:54 +01:00
mux.h arm: mach-omap2: remove NULL board_mux from board files 2010-12-02 17:03:41 -08:00
omap4-common.c omap4: l2x0: Enable early BRESP bit 2010-12-18 09:33:01 -08:00
omap44xx-smc.S omap4: Add smc API to read AuxCoreBoot0 register 2010-08-02 13:18:18 +03:00
omap_hwmod_3xxx_data.c OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanism 2010-12-21 19:57:40 -07:00
omap_hwmod_44xx_data.c OMAP4: hwmod data: Add SIDLE_SMART_WKUP modes to several IPs 2010-12-21 21:31:28 -07:00
omap_hwmod_2420_data.c OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanism 2010-12-21 19:57:40 -07:00
omap_hwmod_2430_data.c OMAP2430: hwmod data: Use common dev_attr for i2c1 and i2c2 2010-12-21 21:31:00 -07:00
omap_hwmod_common_data.c OMAP: hwmod data: add class for IVA hwmods 2010-07-26 16:34:31 -06:00
omap_hwmod_common_data.h OMAP: hwmod data: add class for IVA hwmods 2010-07-26 16:34:31 -06:00
omap_hwmod.c OMAP: PM: implement context loss count APIs 2010-12-21 21:31:55 -07:00
omap_opp_data.h omap: opp: add OMAP3 OPP table data and common init 2010-12-21 14:30:40 -08:00
omap-headsmp.S omap4: Add smc API to read AuxCoreBoot0 register 2010-08-02 13:18:18 +03:00
omap-hotplug.c omap4: hotplug: Add basic CPU hotplug support 2010-08-02 13:18:19 +03:00
omap-iommu.c OMAP: iommu: make iva2 iommu selectable 2010-12-15 11:33:31 -06:00
omap-smp.c omap: Fix sev instruction usage for multi-omap 2010-08-16 09:22:04 +03:00
opp2xxx.h
opp3xxx_data.c omap: opp: add OMAP3 OPP table data and common init 2010-12-21 14:30:40 -08:00
opp4xxx_data.c omap4: opp: add OPP table data 2010-12-21 14:30:40 -08:00
opp2420_data.c
opp2430_data.c
opp.c omap: opp: add OMAP3 OPP table data and common init 2010-12-21 14:30:40 -08:00
pm24xx.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
pm34xx.c OMAP3: control/PM: move padconf save code to mach-omap2/control.c 2010-12-21 21:05:16 -07:00
pm44xx.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
pm_bus.c OMAP2+: PM: initial runtime PM core support 2010-09-21 11:51:23 -07:00
pm-debug.c OMAP: PM noop: implement context loss count for non-omap_devices 2010-12-21 21:31:55 -07:00
pm.c OMAP3: PM: Adding voltage driver support. 2010-12-22 14:31:02 -08:00
pm.h OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomain2xxx_3xxx.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomain44xx.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomain-common.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomain.c OMAP2+: powerdomain: add API to get context loss count 2010-12-21 21:31:55 -07:00
powerdomain.h OMAP2+: powerdomain: add API to get context loss count 2010-12-21 21:31:55 -07:00
powerdomains2xxx_3xxx_data.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomains2xxx_3xxx_data.h OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomains2xxx_data.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomains3xxx_data.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomains44xx_data.c OMAP4: powerdomain: Remove L3INIT_PD OFF state 2010-12-21 22:37:28 -07:00
prcm44xx.h OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
prcm_mpu44xx.c OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
prcm_mpu44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
prcm-common.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prcm.c OMAP3: SDRC: Add comments on Errata i520 for Global SW reset 2010-12-22 09:53:26 -07:00
prm2xxx_3xxx.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
prm2xxx_3xxx.h OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
prm44xx.c OMAP4: PRCM: move global reset function for OMAP4 to an OMAP4-specific file 2010-12-21 21:05:14 -07:00
prm44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
prm-regbits-24xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prm-regbits-34xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prm-regbits-44xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prm.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prminst44xx.c OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
prminst44xx.h OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
scrm44xx.h OMAP4: PRCM: Add SCRM header file 2010-12-21 20:01:54 -07:00
sdram-hynix-h8mbx00u0mer-0em.h
sdram-micron-mt46h32m32lf-6.h
sdram-nokia.c arm: omap: sdram-nokia: add 97.6/195.2 MHz timing data 2010-12-17 15:13:46 -08:00
sdram-nokia.h arm: omap: add sdram-nokia.h 2010-12-17 15:13:44 -08:00
sdram-numonyx-m65kxxxxam.h
sdram-qimonda-hyb18m512160af-6.h
sdrc2xxx.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
sdrc.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
sdrc.h OMAP2+: use global values for the SRAM PA addresses 2010-12-21 14:45:56 -08:00
serial.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
sleep24xx.S
sleep34xx.S OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
sram34xx.S OMAP2/3: SRAM: add comment about crashes during a TLB miss 2010-12-21 21:08:14 -07:00
sram242x.S OMAP2/3: SRAM: add comment about crashes during a TLB miss 2010-12-21 21:08:14 -07:00
sram243x.S OMAP2/3: SRAM: add comment about crashes during a TLB miss 2010-12-21 21:08:14 -07:00
timer-gp.c arm: omap2: timer-gp: delete unused variable 2010-11-24 16:49:42 -08:00
timer-gp.h OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
timer-mpu.c
usb-ehci.c
usb-fs.c OMAP: control: move plat-omap/control.h to mach-omap2/control.h 2010-10-08 11:40:20 -06:00
usb-musb.c USB: AM35x: Add musb support 2010-10-22 10:22:16 -07:00
usb-tusb6010.c
voltage.c OMAP3: PM: Adding voltage driver support. 2010-12-22 14:31:02 -08:00
wd_timer.c OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanism 2010-12-21 19:57:40 -07:00
wd_timer.h OMAP2+: wd_timer: separate watchdog disable code from the rest of mach-omap2/devices.c 2010-12-21 19:56:17 -07:00