1
linux/drivers/net/phy/smsc.c
Steve Glendinning fd9abb3d97 SMSC LAN911x and LAN921x vendor driver
Attached is a driver for SMSC's LAN911x and LAN921x families of embedded
ethernet controllers.

There is an existing smc911x driver in the tree; this is intended to
replace it.  Dustin McIntire (the author of the smc911x driver) has
expressed his support for switching to this driver.

This driver contains workarounds for all known hardware issues, and has
been tested on all flavours of the chip on multiple architectures.

This driver now uses phylib, so this patch also adds support for the
device's internal phy

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: Bahadir Balban <Bahadir.Balban@arm.com>
Signed-off-by: Dustin Mcintire <dustin@sensoria.com>
Signed-off-by: Bill Gatliff <bgat@billgatliff.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-06 00:58:40 -05:00

196 lines
4.9 KiB
C

/*
* drivers/net/phy/smsc.c
*
* Driver for SMSC PHYs
*
* Author: Herbert Valerio Riedel
*
* Copyright (c) 2006 Herbert Valerio Riedel <hvr@gnu.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* Support added for SMSC LAN8187 and LAN8700 by steve.glendinning@smsc.com
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
#include <linux/netdevice.h>
#define MII_LAN83C185_ISF 29 /* Interrupt Source Flags */
#define MII_LAN83C185_IM 30 /* Interrupt Mask */
#define MII_LAN83C185_ISF_INT1 (1<<1) /* Auto-Negotiation Page Received */
#define MII_LAN83C185_ISF_INT2 (1<<2) /* Parallel Detection Fault */
#define MII_LAN83C185_ISF_INT3 (1<<3) /* Auto-Negotiation LP Ack */
#define MII_LAN83C185_ISF_INT4 (1<<4) /* Link Down */
#define MII_LAN83C185_ISF_INT5 (1<<5) /* Remote Fault Detected */
#define MII_LAN83C185_ISF_INT6 (1<<6) /* Auto-Negotiation complete */
#define MII_LAN83C185_ISF_INT7 (1<<7) /* ENERGYON */
#define MII_LAN83C185_ISF_INT_ALL (0x0e)
#define MII_LAN83C185_ISF_INT_PHYLIB_EVENTS \
(MII_LAN83C185_ISF_INT6 | MII_LAN83C185_ISF_INT4)
static int smsc_phy_config_intr(struct phy_device *phydev)
{
int rc = phy_write (phydev, MII_LAN83C185_IM,
((PHY_INTERRUPT_ENABLED == phydev->interrupts)
? MII_LAN83C185_ISF_INT_PHYLIB_EVENTS
: 0));
return rc < 0 ? rc : 0;
}
static int smsc_phy_ack_interrupt(struct phy_device *phydev)
{
int rc = phy_read (phydev, MII_LAN83C185_ISF);
return rc < 0 ? rc : 0;
}
static int smsc_phy_config_init(struct phy_device *phydev)
{
return smsc_phy_ack_interrupt (phydev);
}
static struct phy_driver lan83c185_driver = {
.phy_id = 0x0007c0a0, /* OUI=0x00800f, Model#=0x0a */
.phy_id_mask = 0xfffffff0,
.name = "SMSC LAN83C185",
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
| SUPPORTED_Asym_Pause),
.flags = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
/* basic functions */
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.config_init = smsc_phy_config_init,
/* IRQ related */
.ack_interrupt = smsc_phy_ack_interrupt,
.config_intr = smsc_phy_config_intr,
.driver = { .owner = THIS_MODULE, }
};
static struct phy_driver lan8187_driver = {
.phy_id = 0x0007c0b0, /* OUI=0x00800f, Model#=0x0b */
.phy_id_mask = 0xfffffff0,
.name = "SMSC LAN8187",
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
| SUPPORTED_Asym_Pause),
.flags = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
/* basic functions */
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.config_init = smsc_phy_config_init,
/* IRQ related */
.ack_interrupt = smsc_phy_ack_interrupt,
.config_intr = smsc_phy_config_intr,
.driver = { .owner = THIS_MODULE, }
};
static struct phy_driver lan8700_driver = {
.phy_id = 0x0007c0c0, /* OUI=0x00800f, Model#=0x0c */
.phy_id_mask = 0xfffffff0,
.name = "SMSC LAN8700",
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
| SUPPORTED_Asym_Pause),
.flags = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
/* basic functions */
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.config_init = smsc_phy_config_init,
/* IRQ related */
.ack_interrupt = smsc_phy_ack_interrupt,
.config_intr = smsc_phy_config_intr,
.driver = { .owner = THIS_MODULE, }
};
static struct phy_driver lan911x_int_driver = {
.phy_id = 0x0007c0d0, /* OUI=0x00800f, Model#=0x0d */
.phy_id_mask = 0xfffffff0,
.name = "SMSC LAN911x Internal PHY",
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
| SUPPORTED_Asym_Pause),
.flags = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
/* basic functions */
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.config_init = smsc_phy_config_init,
/* IRQ related */
.ack_interrupt = smsc_phy_ack_interrupt,
.config_intr = smsc_phy_config_intr,
.driver = { .owner = THIS_MODULE, }
};
static int __init smsc_init(void)
{
int ret;
ret = phy_driver_register (&lan83c185_driver);
if (ret)
goto err1;
ret = phy_driver_register (&lan8187_driver);
if (ret)
goto err2;
ret = phy_driver_register (&lan8700_driver);
if (ret)
goto err3;
ret = phy_driver_register (&lan911x_int_driver);
if (ret)
goto err4;
return 0;
err4:
phy_driver_unregister (&lan8700_driver);
err3:
phy_driver_unregister (&lan8187_driver);
err2:
phy_driver_unregister (&lan83c185_driver);
err1:
return ret;
}
static void __exit smsc_exit(void)
{
phy_driver_unregister (&lan911x_int_driver);
phy_driver_unregister (&lan8700_driver);
phy_driver_unregister (&lan8187_driver);
phy_driver_unregister (&lan83c185_driver);
}
MODULE_DESCRIPTION("SMSC PHY driver");
MODULE_AUTHOR("Herbert Valerio Riedel");
MODULE_LICENSE("GPL");
module_init(smsc_init);
module_exit(smsc_exit);