1
linux/arch/arm/common/it8152.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

347 lines
8.9 KiB
C

/*
* linux/arch/arm/common/it8152.c
*
* Copyright Compulab Ltd, 2002-2007
* Mike Rapoport <mike@compulab.co.il>
*
* The DMA bouncing part is taken from arch/arm/mach-ixp4xx/common-pci.c
* (see this file for respective copyrights)
*
* Thanks to Guennadi Liakhovetski <gl@dsa-ac.de> for IRQ enumberation
* and demux code.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/ptrace.h>
#include <linux/interrupt.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/mach/pci.h>
#include <asm/hardware/it8152.h>
#define MAX_SLOTS 21
static void it8152_mask_irq(unsigned int irq)
{
if (irq >= IT8152_LD_IRQ(0)) {
__raw_writel((__raw_readl(IT8152_INTC_LDCNIMR) |
(1 << (irq - IT8152_LD_IRQ(0)))),
IT8152_INTC_LDCNIMR);
} else if (irq >= IT8152_LP_IRQ(0)) {
__raw_writel((__raw_readl(IT8152_INTC_LPCNIMR) |
(1 << (irq - IT8152_LP_IRQ(0)))),
IT8152_INTC_LPCNIMR);
} else if (irq >= IT8152_PD_IRQ(0)) {
__raw_writel((__raw_readl(IT8152_INTC_PDCNIMR) |
(1 << (irq - IT8152_PD_IRQ(0)))),
IT8152_INTC_PDCNIMR);
}
}
static void it8152_unmask_irq(unsigned int irq)
{
if (irq >= IT8152_LD_IRQ(0)) {
__raw_writel((__raw_readl(IT8152_INTC_LDCNIMR) &
~(1 << (irq - IT8152_LD_IRQ(0)))),
IT8152_INTC_LDCNIMR);
} else if (irq >= IT8152_LP_IRQ(0)) {
__raw_writel((__raw_readl(IT8152_INTC_LPCNIMR) &
~(1 << (irq - IT8152_LP_IRQ(0)))),
IT8152_INTC_LPCNIMR);
} else if (irq >= IT8152_PD_IRQ(0)) {
__raw_writel((__raw_readl(IT8152_INTC_PDCNIMR) &
~(1 << (irq - IT8152_PD_IRQ(0)))),
IT8152_INTC_PDCNIMR);
}
}
static struct irq_chip it8152_irq_chip = {
.name = "it8152",
.ack = it8152_mask_irq,
.mask = it8152_mask_irq,
.unmask = it8152_unmask_irq,
};
void it8152_init_irq(void)
{
int irq;
__raw_writel((0xffff), IT8152_INTC_PDCNIMR);
__raw_writel((0), IT8152_INTC_PDCNIRR);
__raw_writel((0xffff), IT8152_INTC_LPCNIMR);
__raw_writel((0), IT8152_INTC_LPCNIRR);
__raw_writel((0xffff), IT8152_INTC_LDCNIMR);
__raw_writel((0), IT8152_INTC_LDCNIRR);
for (irq = IT8152_IRQ(0); irq <= IT8152_LAST_IRQ; irq++) {
set_irq_chip(irq, &it8152_irq_chip);
set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
}
void it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
{
int bits_pd, bits_lp, bits_ld;
int i;
while (1) {
/* Read all */
bits_pd = __raw_readl(IT8152_INTC_PDCNIRR);
bits_lp = __raw_readl(IT8152_INTC_LPCNIRR);
bits_ld = __raw_readl(IT8152_INTC_LDCNIRR);
/* Ack */
__raw_writel((~bits_pd), IT8152_INTC_PDCNIRR);
__raw_writel((~bits_lp), IT8152_INTC_LPCNIRR);
__raw_writel((~bits_ld), IT8152_INTC_LDCNIRR);
if (!(bits_ld | bits_lp | bits_pd)) {
/* Re-read to guarantee, that there was a moment of
time, when they all three were 0. */
bits_pd = __raw_readl(IT8152_INTC_PDCNIRR);
bits_lp = __raw_readl(IT8152_INTC_LPCNIRR);
bits_ld = __raw_readl(IT8152_INTC_LDCNIRR);
if (!(bits_ld | bits_lp | bits_pd))
return;
}
bits_pd &= ((1 << IT8152_PD_IRQ_COUNT) - 1);
while (bits_pd) {
i = __ffs(bits_pd);
generic_handle_irq(IT8152_PD_IRQ(i));
bits_pd &= ~(1 << i);
}
bits_lp &= ((1 << IT8152_LP_IRQ_COUNT) - 1);
while (bits_lp) {
i = __ffs(bits_lp);
generic_handle_irq(IT8152_LP_IRQ(i));
bits_lp &= ~(1 << i);
}
bits_ld &= ((1 << IT8152_LD_IRQ_COUNT) - 1);
while (bits_ld) {
i = __ffs(bits_ld);
generic_handle_irq(IT8152_LD_IRQ(i));
bits_ld &= ~(1 << i);
}
}
}
/* mapping for on-chip devices */
int __init it8152_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
if ((dev->vendor == PCI_VENDOR_ID_ITE) &&
(dev->device == PCI_DEVICE_ID_ITE_8152)) {
if ((dev->class >> 8) == PCI_CLASS_MULTIMEDIA_AUDIO)
return IT8152_AUDIO_INT;
if ((dev->class >> 8) == PCI_CLASS_SERIAL_USB)
return IT8152_USB_INT;
if ((dev->class >> 8) == PCI_CLASS_SYSTEM_DMA)
return IT8152_CDMA_INT;
}
return 0;
}
static unsigned long it8152_pci_dev_base_address(struct pci_bus *bus,
unsigned int devfn)
{
unsigned long addr = 0;
if (bus->number == 0) {
if (devfn < PCI_DEVFN(MAX_SLOTS, 0))
addr = (devfn << 8);
} else
addr = (bus->number << 16) | (devfn << 8);
return addr;
}
static int it8152_pci_read_config(struct pci_bus *bus,
unsigned int devfn, int where,
int size, u32 *value)
{
unsigned long addr = it8152_pci_dev_base_address(bus, devfn);
u32 v;
int shift;
shift = (where & 3);
__raw_writel((addr + where), IT8152_PCI_CFG_ADDR);
v = (__raw_readl(IT8152_PCI_CFG_DATA) >> (8 * (shift)));
*value = v;
return PCIBIOS_SUCCESSFUL;
}
static int it8152_pci_write_config(struct pci_bus *bus,
unsigned int devfn, int where,
int size, u32 value)
{
unsigned long addr = it8152_pci_dev_base_address(bus, devfn);
u32 v, vtemp, mask = 0;
int shift;
if (size == 1)
mask = 0xff;
if (size == 2)
mask = 0xffff;
shift = (where & 3);
__raw_writel((addr + where), IT8152_PCI_CFG_ADDR);
vtemp = __raw_readl(IT8152_PCI_CFG_DATA);
if (mask)
vtemp &= ~(mask << (8 * shift));
else
vtemp = 0;
v = (value << (8 * shift));
__raw_writel((addr + where), IT8152_PCI_CFG_ADDR);
__raw_writel((v | vtemp), IT8152_PCI_CFG_DATA);
return PCIBIOS_SUCCESSFUL;
}
static struct pci_ops it8152_ops = {
.read = it8152_pci_read_config,
.write = it8152_pci_write_config,
};
static struct resource it8152_io = {
.name = "IT8152 PCI I/O region",
.flags = IORESOURCE_IO,
};
static struct resource it8152_mem = {
.name = "IT8152 PCI memory region",
.start = 0x10000000,
.end = 0x13e00000,
.flags = IORESOURCE_MEM,
};
/*
* The following functions are needed for DMA bouncing.
* ITE8152 chip can addrees up to 64MByte, so all the devices
* connected to ITE8152 (PCI and USB) should have limited DMA window
*/
/*
* Setup DMA mask to 64MB on devices connected to ITE8152. Ignore all
* other devices.
*/
static int it8152_pci_platform_notify(struct device *dev)
{
if (dev->bus == &pci_bus_type) {
if (dev->dma_mask)
*dev->dma_mask = (SZ_64M - 1) | PHYS_OFFSET;
dev->coherent_dma_mask = (SZ_64M - 1) | PHYS_OFFSET;
dmabounce_register_dev(dev, 2048, 4096);
}
return 0;
}
static int it8152_pci_platform_notify_remove(struct device *dev)
{
if (dev->bus == &pci_bus_type)
dmabounce_unregister_dev(dev);
return 0;
}
int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
{
dev_dbg(dev, "%s: dma_addr %08x, size %08x\n",
__func__, dma_addr, size);
return (dev->bus == &pci_bus_type) &&
((dma_addr + size - PHYS_OFFSET) >= SZ_64M);
}
int __init it8152_pci_setup(int nr, struct pci_sys_data *sys)
{
it8152_io.start = IT8152_IO_BASE + 0x12000;
it8152_io.end = IT8152_IO_BASE + 0x12000 + 0x100000;
sys->mem_offset = 0x10000000;
sys->io_offset = IT8152_IO_BASE;
if (request_resource(&ioport_resource, &it8152_io)) {
printk(KERN_ERR "PCI: unable to allocate IO region\n");
goto err0;
}
if (request_resource(&iomem_resource, &it8152_mem)) {
printk(KERN_ERR "PCI: unable to allocate memory region\n");
goto err1;
}
sys->resource[0] = &it8152_io;
sys->resource[1] = &it8152_mem;
if (platform_notify || platform_notify_remove) {
printk(KERN_ERR "PCI: Can't use platform_notify\n");
goto err2;
}
platform_notify = it8152_pci_platform_notify;
platform_notify_remove = it8152_pci_platform_notify_remove;
return 1;
err2:
release_resource(&it8152_io);
err1:
release_resource(&it8152_mem);
err0:
return -EBUSY;
}
/*
* If we set up a device for bus mastering, we need to check the latency
* timer as we don't have even crappy BIOSes to set it properly.
* The implementation is from arch/i386/pci/i386.c
*/
unsigned int pcibios_max_latency = 255;
void pcibios_set_master(struct pci_dev *dev)
{
u8 lat;
/* no need to update on-chip OHCI controller */
if ((dev->vendor == PCI_VENDOR_ID_ITE) &&
(dev->device == PCI_DEVICE_ID_ITE_8152) &&
((dev->class >> 8) == PCI_CLASS_SERIAL_USB))
return;
pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
if (lat < 16)
lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
else if (lat > pcibios_max_latency)
lat = pcibios_max_latency;
else
return;
printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n",
pci_name(dev), lat);
pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
}
struct pci_bus * __init it8152_pci_scan_bus(int nr, struct pci_sys_data *sys)
{
return pci_scan_bus(nr, &it8152_ops, sys);
}