2d9329f3a5
All soc-camera camera and host drivers must specify supported data signal polarity, after all drivers are fixed, we'll add a suitable test to soc_camera_bus_param_compatible(). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
589 lines
14 KiB
C
589 lines
14 KiB
C
/*
|
|
* Renesas System Solutions Asia Pte. Ltd - Migo-R
|
|
*
|
|
* Copyright (C) 2008 Magnus Damm
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
* for more details.
|
|
*/
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/input.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/smc91x.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/spi_gpio.h>
|
|
#include <video/sh_mobile_lcdc.h>
|
|
#include <media/sh_mobile_ceu.h>
|
|
#include <media/ov772x.h>
|
|
#include <media/tw9910.h>
|
|
#include <asm/clock.h>
|
|
#include <asm/machvec.h>
|
|
#include <asm/io.h>
|
|
#include <asm/sh_keysc.h>
|
|
#include <mach/migor.h>
|
|
#include <cpu/sh7722.h>
|
|
|
|
/* Address IRQ Size Bus Description
|
|
* 0x00000000 64MB 16 NOR Flash (SP29PL256N)
|
|
* 0x0c000000 64MB 64 SDRAM (2xK4M563233G)
|
|
* 0x10000000 IRQ0 16 Ethernet (SMC91C111)
|
|
* 0x14000000 IRQ4 16 USB 2.0 Host Controller (M66596)
|
|
* 0x18000000 8GB 8 NAND Flash (K9K8G08U0A)
|
|
*/
|
|
|
|
static struct smc91x_platdata smc91x_info = {
|
|
.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
|
|
};
|
|
|
|
static struct resource smc91x_eth_resources[] = {
|
|
[0] = {
|
|
.name = "SMC91C111" ,
|
|
.start = 0x10000300,
|
|
.end = 0x1000030f,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = 32, /* IRQ0 */
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
|
|
},
|
|
};
|
|
|
|
static struct platform_device smc91x_eth_device = {
|
|
.name = "smc91x",
|
|
.num_resources = ARRAY_SIZE(smc91x_eth_resources),
|
|
.resource = smc91x_eth_resources,
|
|
.dev = {
|
|
.platform_data = &smc91x_info,
|
|
},
|
|
};
|
|
|
|
static struct sh_keysc_info sh_keysc_info = {
|
|
.mode = SH_KEYSC_MODE_2, /* KEYOUT0->4, KEYIN1->5 */
|
|
.scan_timing = 3,
|
|
.delay = 5,
|
|
.keycodes = {
|
|
0, KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_ENTER,
|
|
0, KEY_F, KEY_C, KEY_D, KEY_H, KEY_1,
|
|
0, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6,
|
|
0, KEY_7, KEY_8, KEY_9, KEY_S, KEY_0,
|
|
0, KEY_P, KEY_STOP, KEY_REWIND, KEY_PLAY, KEY_FASTFORWARD,
|
|
},
|
|
};
|
|
|
|
static struct resource sh_keysc_resources[] = {
|
|
[0] = {
|
|
.start = 0x044b0000,
|
|
.end = 0x044b000f,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = 79,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device sh_keysc_device = {
|
|
.name = "sh_keysc",
|
|
.id = 0, /* "keysc0" clock */
|
|
.num_resources = ARRAY_SIZE(sh_keysc_resources),
|
|
.resource = sh_keysc_resources,
|
|
.dev = {
|
|
.platform_data = &sh_keysc_info,
|
|
},
|
|
};
|
|
|
|
static struct mtd_partition migor_nor_flash_partitions[] =
|
|
{
|
|
{
|
|
.name = "uboot",
|
|
.offset = 0,
|
|
.size = (1 * 1024 * 1024),
|
|
.mask_flags = MTD_WRITEABLE, /* Read-only */
|
|
},
|
|
{
|
|
.name = "rootfs",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = (15 * 1024 * 1024),
|
|
},
|
|
{
|
|
.name = "other",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL,
|
|
},
|
|
};
|
|
|
|
static struct physmap_flash_data migor_nor_flash_data = {
|
|
.width = 2,
|
|
.parts = migor_nor_flash_partitions,
|
|
.nr_parts = ARRAY_SIZE(migor_nor_flash_partitions),
|
|
};
|
|
|
|
static struct resource migor_nor_flash_resources[] = {
|
|
[0] = {
|
|
.name = "NOR Flash",
|
|
.start = 0x00000000,
|
|
.end = 0x03ffffff,
|
|
.flags = IORESOURCE_MEM,
|
|
}
|
|
};
|
|
|
|
static struct platform_device migor_nor_flash_device = {
|
|
.name = "physmap-flash",
|
|
.resource = migor_nor_flash_resources,
|
|
.num_resources = ARRAY_SIZE(migor_nor_flash_resources),
|
|
.dev = {
|
|
.platform_data = &migor_nor_flash_data,
|
|
},
|
|
};
|
|
|
|
static struct mtd_partition migor_nand_flash_partitions[] = {
|
|
{
|
|
.name = "nanddata1",
|
|
.offset = 0x0,
|
|
.size = 512 * 1024 * 1024,
|
|
},
|
|
{
|
|
.name = "nanddata2",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = 512 * 1024 * 1024,
|
|
},
|
|
};
|
|
|
|
static void migor_nand_flash_cmd_ctl(struct mtd_info *mtd, int cmd,
|
|
unsigned int ctrl)
|
|
{
|
|
struct nand_chip *chip = mtd->priv;
|
|
|
|
if (cmd == NAND_CMD_NONE)
|
|
return;
|
|
|
|
if (ctrl & NAND_CLE)
|
|
writeb(cmd, chip->IO_ADDR_W + 0x00400000);
|
|
else if (ctrl & NAND_ALE)
|
|
writeb(cmd, chip->IO_ADDR_W + 0x00800000);
|
|
else
|
|
writeb(cmd, chip->IO_ADDR_W);
|
|
}
|
|
|
|
static int migor_nand_flash_ready(struct mtd_info *mtd)
|
|
{
|
|
return gpio_get_value(GPIO_PTA1); /* NAND_RBn */
|
|
}
|
|
|
|
struct platform_nand_data migor_nand_flash_data = {
|
|
.chip = {
|
|
.nr_chips = 1,
|
|
.partitions = migor_nand_flash_partitions,
|
|
.nr_partitions = ARRAY_SIZE(migor_nand_flash_partitions),
|
|
.chip_delay = 20,
|
|
.part_probe_types = (const char *[]) { "cmdlinepart", NULL },
|
|
},
|
|
.ctrl = {
|
|
.dev_ready = migor_nand_flash_ready,
|
|
.cmd_ctrl = migor_nand_flash_cmd_ctl,
|
|
},
|
|
};
|
|
|
|
static struct resource migor_nand_flash_resources[] = {
|
|
[0] = {
|
|
.name = "NAND Flash",
|
|
.start = 0x18000000,
|
|
.end = 0x18ffffff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct platform_device migor_nand_flash_device = {
|
|
.name = "gen_nand",
|
|
.resource = migor_nand_flash_resources,
|
|
.num_resources = ARRAY_SIZE(migor_nand_flash_resources),
|
|
.dev = {
|
|
.platform_data = &migor_nand_flash_data,
|
|
}
|
|
};
|
|
|
|
static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
|
|
#ifdef CONFIG_SH_MIGOR_RTA_WVGA
|
|
.clock_source = LCDC_CLK_BUS,
|
|
.ch[0] = {
|
|
.chan = LCDC_CHAN_MAINLCD,
|
|
.bpp = 16,
|
|
.interface_type = RGB16,
|
|
.clock_divider = 2,
|
|
.lcd_cfg = {
|
|
.name = "LB070WV1",
|
|
.xres = 800,
|
|
.yres = 480,
|
|
.left_margin = 64,
|
|
.right_margin = 16,
|
|
.hsync_len = 120,
|
|
.upper_margin = 1,
|
|
.lower_margin = 17,
|
|
.vsync_len = 2,
|
|
.sync = 0,
|
|
},
|
|
.lcd_size_cfg = { /* 7.0 inch */
|
|
.width = 152,
|
|
.height = 91,
|
|
},
|
|
}
|
|
#endif
|
|
#ifdef CONFIG_SH_MIGOR_QVGA
|
|
.clock_source = LCDC_CLK_PERIPHERAL,
|
|
.ch[0] = {
|
|
.chan = LCDC_CHAN_MAINLCD,
|
|
.bpp = 16,
|
|
.interface_type = SYS16A,
|
|
.clock_divider = 10,
|
|
.lcd_cfg = {
|
|
.name = "PH240320T",
|
|
.xres = 320,
|
|
.yres = 240,
|
|
.left_margin = 0,
|
|
.right_margin = 16,
|
|
.hsync_len = 8,
|
|
.upper_margin = 1,
|
|
.lower_margin = 17,
|
|
.vsync_len = 2,
|
|
.sync = FB_SYNC_HOR_HIGH_ACT,
|
|
},
|
|
.lcd_size_cfg = { /* 2.4 inch */
|
|
.width = 49,
|
|
.height = 37,
|
|
},
|
|
.board_cfg = {
|
|
.setup_sys = migor_lcd_qvga_setup,
|
|
},
|
|
.sys_bus_cfg = {
|
|
.ldmt2r = 0x06000a09,
|
|
.ldmt3r = 0x180e3418,
|
|
/* set 1s delay to encourage fsync() */
|
|
.deferred_io_msec = 1000,
|
|
},
|
|
}
|
|
#endif
|
|
};
|
|
|
|
static struct resource migor_lcdc_resources[] = {
|
|
[0] = {
|
|
.name = "LCDC",
|
|
.start = 0xfe940000, /* P4-only space */
|
|
.end = 0xfe941fff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = 28,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device migor_lcdc_device = {
|
|
.name = "sh_mobile_lcdc_fb",
|
|
.num_resources = ARRAY_SIZE(migor_lcdc_resources),
|
|
.resource = migor_lcdc_resources,
|
|
.dev = {
|
|
.platform_data = &sh_mobile_lcdc_info,
|
|
},
|
|
};
|
|
|
|
static struct clk *camera_clk;
|
|
static DEFINE_MUTEX(camera_lock);
|
|
|
|
static void camera_power_on(int is_tw)
|
|
{
|
|
mutex_lock(&camera_lock);
|
|
|
|
/* Use 10 MHz VIO_CKO instead of 24 MHz to work
|
|
* around signal quality issues on Panel Board V2.1.
|
|
*/
|
|
camera_clk = clk_get(NULL, "video_clk");
|
|
clk_set_rate(camera_clk, 10000000);
|
|
clk_enable(camera_clk); /* start VIO_CKO */
|
|
|
|
/* use VIO_RST to take camera out of reset */
|
|
mdelay(10);
|
|
if (is_tw) {
|
|
gpio_set_value(GPIO_PTT2, 0);
|
|
gpio_set_value(GPIO_PTT0, 0);
|
|
} else {
|
|
gpio_set_value(GPIO_PTT0, 1);
|
|
}
|
|
gpio_set_value(GPIO_PTT3, 0);
|
|
mdelay(10);
|
|
gpio_set_value(GPIO_PTT3, 1);
|
|
mdelay(10); /* wait to let chip come out of reset */
|
|
}
|
|
|
|
static void camera_power_off(void)
|
|
{
|
|
clk_disable(camera_clk); /* stop VIO_CKO */
|
|
clk_put(camera_clk);
|
|
|
|
gpio_set_value(GPIO_PTT3, 0);
|
|
mutex_unlock(&camera_lock);
|
|
}
|
|
|
|
static int ov7725_power(struct device *dev, int mode)
|
|
{
|
|
if (mode)
|
|
camera_power_on(0);
|
|
else
|
|
camera_power_off();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tw9910_power(struct device *dev, int mode)
|
|
{
|
|
if (mode)
|
|
camera_power_on(1);
|
|
else
|
|
camera_power_off();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
|
|
.flags = SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_PCLK_SAMPLE_RISING
|
|
| SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH
|
|
| SOCAM_DATA_ACTIVE_HIGH,
|
|
};
|
|
|
|
static struct resource migor_ceu_resources[] = {
|
|
[0] = {
|
|
.name = "CEU",
|
|
.start = 0xfe910000,
|
|
.end = 0xfe91009f,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = 52,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[2] = {
|
|
/* place holder for contiguous memory */
|
|
},
|
|
};
|
|
|
|
static struct platform_device migor_ceu_device = {
|
|
.name = "sh_mobile_ceu",
|
|
.id = 0, /* "ceu0" clock */
|
|
.num_resources = ARRAY_SIZE(migor_ceu_resources),
|
|
.resource = migor_ceu_resources,
|
|
.dev = {
|
|
.platform_data = &sh_mobile_ceu_info,
|
|
},
|
|
};
|
|
|
|
static struct ov772x_camera_info ov7725_info = {
|
|
.buswidth = SOCAM_DATAWIDTH_8,
|
|
.link = {
|
|
.power = ov7725_power,
|
|
},
|
|
};
|
|
|
|
static struct tw9910_video_info tw9910_info = {
|
|
.buswidth = SOCAM_DATAWIDTH_8,
|
|
.mpout = TW9910_MPO_FIELD,
|
|
.link = {
|
|
.power = tw9910_power,
|
|
}
|
|
};
|
|
|
|
struct spi_gpio_platform_data sdcard_cn9_platform_data = {
|
|
.sck = GPIO_PTD0,
|
|
.mosi = GPIO_PTD1,
|
|
.miso = GPIO_PTD2,
|
|
.num_chipselect = 1,
|
|
};
|
|
|
|
static struct platform_device sdcard_cn9_device = {
|
|
.name = "spi_gpio",
|
|
.dev = {
|
|
.platform_data = &sdcard_cn9_platform_data,
|
|
},
|
|
};
|
|
|
|
static struct platform_device *migor_devices[] __initdata = {
|
|
&smc91x_eth_device,
|
|
&sh_keysc_device,
|
|
&migor_lcdc_device,
|
|
&migor_ceu_device,
|
|
&migor_nor_flash_device,
|
|
&migor_nand_flash_device,
|
|
&sdcard_cn9_device,
|
|
};
|
|
|
|
static struct i2c_board_info migor_i2c_devices[] = {
|
|
{
|
|
I2C_BOARD_INFO("rs5c372b", 0x32),
|
|
},
|
|
{
|
|
I2C_BOARD_INFO("migor_ts", 0x51),
|
|
.irq = 38, /* IRQ6 */
|
|
},
|
|
{
|
|
I2C_BOARD_INFO("ov772x", 0x21),
|
|
.platform_data = &ov7725_info,
|
|
},
|
|
{
|
|
I2C_BOARD_INFO("tw9910", 0x45),
|
|
.platform_data = &tw9910_info,
|
|
},
|
|
};
|
|
|
|
static struct spi_board_info migor_spi_devices[] = {
|
|
{
|
|
.modalias = "mmc_spi",
|
|
.max_speed_hz = 5000000,
|
|
.chip_select = 0,
|
|
.controller_data = (void *) GPIO_PTD5,
|
|
},
|
|
};
|
|
|
|
static int __init migor_devices_setup(void)
|
|
{
|
|
|
|
#ifdef CONFIG_PM
|
|
/* Let D11 LED show STATUS0 */
|
|
gpio_request(GPIO_FN_STATUS0, NULL);
|
|
|
|
/* Lit D12 LED show PDSTATUS */
|
|
gpio_request(GPIO_FN_PDSTATUS, NULL);
|
|
#else
|
|
/* Lit D11 LED */
|
|
gpio_request(GPIO_PTJ7, NULL);
|
|
gpio_direction_output(GPIO_PTJ7, 1);
|
|
gpio_export(GPIO_PTJ7, 0);
|
|
|
|
/* Lit D12 LED */
|
|
gpio_request(GPIO_PTJ5, NULL);
|
|
gpio_direction_output(GPIO_PTJ5, 1);
|
|
gpio_export(GPIO_PTJ5, 0);
|
|
#endif
|
|
|
|
/* SMC91C111 - Enable IRQ0, Setup CS4 for 16-bit fast access */
|
|
gpio_request(GPIO_FN_IRQ0, NULL);
|
|
ctrl_outl(0x00003400, BSC_CS4BCR);
|
|
ctrl_outl(0x00110080, BSC_CS4WCR);
|
|
|
|
/* KEYSC */
|
|
gpio_request(GPIO_FN_KEYOUT0, NULL);
|
|
gpio_request(GPIO_FN_KEYOUT1, NULL);
|
|
gpio_request(GPIO_FN_KEYOUT2, NULL);
|
|
gpio_request(GPIO_FN_KEYOUT3, NULL);
|
|
gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
|
|
gpio_request(GPIO_FN_KEYIN1, NULL);
|
|
gpio_request(GPIO_FN_KEYIN2, NULL);
|
|
gpio_request(GPIO_FN_KEYIN3, NULL);
|
|
gpio_request(GPIO_FN_KEYIN4, NULL);
|
|
gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
|
|
|
|
/* NAND Flash */
|
|
gpio_request(GPIO_FN_CS6A_CE2B, NULL);
|
|
ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x0600) | 0x0200, BSC_CS6ABCR);
|
|
gpio_request(GPIO_PTA1, NULL);
|
|
gpio_direction_input(GPIO_PTA1);
|
|
|
|
/* Touch Panel */
|
|
gpio_request(GPIO_FN_IRQ6, NULL);
|
|
|
|
/* LCD Panel */
|
|
#ifdef CONFIG_SH_MIGOR_QVGA /* LCDC - QVGA - Enable SYS Interface signals */
|
|
gpio_request(GPIO_FN_LCDD17, NULL);
|
|
gpio_request(GPIO_FN_LCDD16, NULL);
|
|
gpio_request(GPIO_FN_LCDD15, NULL);
|
|
gpio_request(GPIO_FN_LCDD14, NULL);
|
|
gpio_request(GPIO_FN_LCDD13, NULL);
|
|
gpio_request(GPIO_FN_LCDD12, NULL);
|
|
gpio_request(GPIO_FN_LCDD11, NULL);
|
|
gpio_request(GPIO_FN_LCDD10, NULL);
|
|
gpio_request(GPIO_FN_LCDD8, NULL);
|
|
gpio_request(GPIO_FN_LCDD7, NULL);
|
|
gpio_request(GPIO_FN_LCDD6, NULL);
|
|
gpio_request(GPIO_FN_LCDD5, NULL);
|
|
gpio_request(GPIO_FN_LCDD4, NULL);
|
|
gpio_request(GPIO_FN_LCDD3, NULL);
|
|
gpio_request(GPIO_FN_LCDD2, NULL);
|
|
gpio_request(GPIO_FN_LCDD1, NULL);
|
|
gpio_request(GPIO_FN_LCDRS, NULL);
|
|
gpio_request(GPIO_FN_LCDCS, NULL);
|
|
gpio_request(GPIO_FN_LCDRD, NULL);
|
|
gpio_request(GPIO_FN_LCDWR, NULL);
|
|
gpio_request(GPIO_PTH2, NULL); /* LCD_DON */
|
|
gpio_direction_output(GPIO_PTH2, 1);
|
|
#endif
|
|
#ifdef CONFIG_SH_MIGOR_RTA_WVGA /* LCDC - WVGA - Enable RGB Interface signals */
|
|
gpio_request(GPIO_FN_LCDD15, NULL);
|
|
gpio_request(GPIO_FN_LCDD14, NULL);
|
|
gpio_request(GPIO_FN_LCDD13, NULL);
|
|
gpio_request(GPIO_FN_LCDD12, NULL);
|
|
gpio_request(GPIO_FN_LCDD11, NULL);
|
|
gpio_request(GPIO_FN_LCDD10, NULL);
|
|
gpio_request(GPIO_FN_LCDD9, NULL);
|
|
gpio_request(GPIO_FN_LCDD8, NULL);
|
|
gpio_request(GPIO_FN_LCDD7, NULL);
|
|
gpio_request(GPIO_FN_LCDD6, NULL);
|
|
gpio_request(GPIO_FN_LCDD5, NULL);
|
|
gpio_request(GPIO_FN_LCDD4, NULL);
|
|
gpio_request(GPIO_FN_LCDD3, NULL);
|
|
gpio_request(GPIO_FN_LCDD2, NULL);
|
|
gpio_request(GPIO_FN_LCDD1, NULL);
|
|
gpio_request(GPIO_FN_LCDD0, NULL);
|
|
gpio_request(GPIO_FN_LCDLCLK, NULL);
|
|
gpio_request(GPIO_FN_LCDDCK, NULL);
|
|
gpio_request(GPIO_FN_LCDVEPWC, NULL);
|
|
gpio_request(GPIO_FN_LCDVCPWC, NULL);
|
|
gpio_request(GPIO_FN_LCDVSYN, NULL);
|
|
gpio_request(GPIO_FN_LCDHSYN, NULL);
|
|
gpio_request(GPIO_FN_LCDDISP, NULL);
|
|
gpio_request(GPIO_FN_LCDDON, NULL);
|
|
#endif
|
|
|
|
/* CEU */
|
|
gpio_request(GPIO_FN_VIO_CLK2, NULL);
|
|
gpio_request(GPIO_FN_VIO_VD2, NULL);
|
|
gpio_request(GPIO_FN_VIO_HD2, NULL);
|
|
gpio_request(GPIO_FN_VIO_FLD, NULL);
|
|
gpio_request(GPIO_FN_VIO_CKO, NULL);
|
|
gpio_request(GPIO_FN_VIO_D15, NULL);
|
|
gpio_request(GPIO_FN_VIO_D14, NULL);
|
|
gpio_request(GPIO_FN_VIO_D13, NULL);
|
|
gpio_request(GPIO_FN_VIO_D12, NULL);
|
|
gpio_request(GPIO_FN_VIO_D11, NULL);
|
|
gpio_request(GPIO_FN_VIO_D10, NULL);
|
|
gpio_request(GPIO_FN_VIO_D9, NULL);
|
|
gpio_request(GPIO_FN_VIO_D8, NULL);
|
|
|
|
gpio_request(GPIO_PTT3, NULL); /* VIO_RST */
|
|
gpio_direction_output(GPIO_PTT3, 0);
|
|
gpio_request(GPIO_PTT2, NULL); /* TV_IN_EN */
|
|
gpio_direction_output(GPIO_PTT2, 1);
|
|
gpio_request(GPIO_PTT0, NULL); /* CAM_EN */
|
|
#ifdef CONFIG_SH_MIGOR_RTA_WVGA
|
|
gpio_direction_output(GPIO_PTT0, 0);
|
|
#else
|
|
gpio_direction_output(GPIO_PTT0, 1);
|
|
#endif
|
|
ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x2000, PORT_MSELCRB); /* D15->D8 */
|
|
|
|
platform_resource_setup_memory(&migor_ceu_device, "ceu", 4 << 20);
|
|
|
|
i2c_register_board_info(0, migor_i2c_devices,
|
|
ARRAY_SIZE(migor_i2c_devices));
|
|
|
|
spi_register_board_info(migor_spi_devices,
|
|
ARRAY_SIZE(migor_spi_devices));
|
|
|
|
return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
|
|
}
|
|
__initcall(migor_devices_setup);
|