1
linux/arch/arm/mach-omap2/powerdomain.c
Paul Walmsley 2bc4ef71c5 OMAP3 PRCM: convert OMAP3 PRCM macros to the _SHIFT/_MASK suffixes
Fix all of the remaining OMAP3 PRCM register shift/bitmask macros that
did not use the _SHIFT/_MASK suffixes to use them.  This makes the use
of these macros consistent.  It is intended to reduce error, as code
can be inspected visually by reviewers to ensure that bitshifts and
bitmasks are used in the appropriate places.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-20 12:31:05 -06:00

1049 lines
27 KiB
C

/*
* OMAP powerdomain control
*
* Copyright (C) 2007-2008 Texas Instruments, Inc.
* Copyright (C) 2007-2009 Nokia Corporation
*
* Written by Paul Walmsley
*
* Added OMAP4 specific support by Abhijit Pagare <abhijitpagare@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#undef DEBUG
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
#include <asm/atomic.h>
#include "cm.h"
#include "cm-regbits-34xx.h"
#include "cm-regbits-44xx.h"
#include "prm.h"
#include "prm-regbits-34xx.h"
#include "prm-regbits-44xx.h"
#include <plat/cpu.h>
#include <plat/powerdomain.h>
#include <plat/clockdomain.h>
#include <plat/prcm.h>
#include "pm.h"
enum {
PWRDM_STATE_NOW = 0,
PWRDM_STATE_PREV,
};
/* Variable holding value of the CPU dependent PWRSTCTRL Register Offset */
static u16 pwrstctrl_reg_offs;
/* Variable holding value of the CPU dependent PWRSTST Register Offset */
static u16 pwrstst_reg_offs;
/* OMAP3 and OMAP4 specific register bit initialisations
* Notice that the names here are not according to each power
* domain but the bit mapping used applies to all of them
*/
/* OMAP3 and OMAP4 Memory Onstate Masks (common across all power domains) */
#define OMAP_MEM0_ONSTATE_MASK OMAP3430_SHAREDL1CACHEFLATONSTATE_MASK
#define OMAP_MEM1_ONSTATE_MASK OMAP3430_L1FLATMEMONSTATE_MASK
#define OMAP_MEM2_ONSTATE_MASK OMAP3430_SHAREDL2CACHEFLATONSTATE_MASK
#define OMAP_MEM3_ONSTATE_MASK OMAP3430_L2FLATMEMONSTATE_MASK
#define OMAP_MEM4_ONSTATE_MASK OMAP4430_OCP_NRET_BANK_ONSTATE_MASK
/* OMAP3 and OMAP4 Memory Retstate Masks (common across all power domains) */
#define OMAP_MEM0_RETSTATE_MASK OMAP3430_SHAREDL1CACHEFLATRETSTATE_MASK
#define OMAP_MEM1_RETSTATE_MASK OMAP3430_L1FLATMEMRETSTATE_MASK
#define OMAP_MEM2_RETSTATE_MASK OMAP3430_SHAREDL2CACHEFLATRETSTATE_MASK
#define OMAP_MEM3_RETSTATE_MASK OMAP3430_L2FLATMEMRETSTATE_MASK
#define OMAP_MEM4_RETSTATE_MASK OMAP4430_OCP_NRET_BANK_RETSTATE_MASK
/* OMAP3 and OMAP4 Memory Status bits */
#define OMAP_MEM0_STATEST_MASK OMAP3430_SHAREDL1CACHEFLATSTATEST_MASK
#define OMAP_MEM1_STATEST_MASK OMAP3430_L1FLATMEMSTATEST_MASK
#define OMAP_MEM2_STATEST_MASK OMAP3430_SHAREDL2CACHEFLATSTATEST_MASK
#define OMAP_MEM3_STATEST_MASK OMAP3430_L2FLATMEMSTATEST_MASK
#define OMAP_MEM4_STATEST_MASK OMAP4430_OCP_NRET_BANK_STATEST_MASK
/* pwrdm_list contains all registered struct powerdomains */
static LIST_HEAD(pwrdm_list);
/* Private functions */
static struct powerdomain *_pwrdm_lookup(const char *name)
{
struct powerdomain *pwrdm, *temp_pwrdm;
pwrdm = NULL;
list_for_each_entry(temp_pwrdm, &pwrdm_list, node) {
if (!strcmp(name, temp_pwrdm->name)) {
pwrdm = temp_pwrdm;
break;
}
}
return pwrdm;
}
/**
* _pwrdm_register - register a powerdomain
* @pwrdm: struct powerdomain * to register
*
* Adds a powerdomain to the internal powerdomain list. Returns
* -EINVAL if given a null pointer, -EEXIST if a powerdomain is
* already registered by the provided name, or 0 upon success.
*/
static int _pwrdm_register(struct powerdomain *pwrdm)
{
int i;
if (!pwrdm)
return -EINVAL;
if (!omap_chip_is(pwrdm->omap_chip))
return -EINVAL;
if (_pwrdm_lookup(pwrdm->name))
return -EEXIST;
list_add(&pwrdm->node, &pwrdm_list);
/* Initialize the powerdomain's state counter */
for (i = 0; i < PWRDM_MAX_PWRSTS; i++)
pwrdm->state_counter[i] = 0;
pwrdm->ret_logic_off_counter = 0;
for (i = 0; i < pwrdm->banks; i++)
pwrdm->ret_mem_off_counter[i] = 0;
pwrdm_wait_transition(pwrdm);
pwrdm->state = pwrdm_read_pwrst(pwrdm);
pwrdm->state_counter[pwrdm->state] = 1;
pr_debug("powerdomain: registered %s\n", pwrdm->name);
return 0;
}
static void _update_logic_membank_counters(struct powerdomain *pwrdm)
{
int i;
u8 prev_logic_pwrst, prev_mem_pwrst;
prev_logic_pwrst = pwrdm_read_prev_logic_pwrst(pwrdm);
if ((pwrdm->pwrsts_logic_ret == PWRSTS_OFF_RET) &&
(prev_logic_pwrst == PWRDM_POWER_OFF))
pwrdm->ret_logic_off_counter++;
for (i = 0; i < pwrdm->banks; i++) {
prev_mem_pwrst = pwrdm_read_prev_mem_pwrst(pwrdm, i);
if ((pwrdm->pwrsts_mem_ret[i] == PWRSTS_OFF_RET) &&
(prev_mem_pwrst == PWRDM_POWER_OFF))
pwrdm->ret_mem_off_counter[i]++;
}
}
static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
{
int prev;
int state;
if (pwrdm == NULL)
return -EINVAL;
state = pwrdm_read_pwrst(pwrdm);
switch (flag) {
case PWRDM_STATE_NOW:
prev = pwrdm->state;
break;
case PWRDM_STATE_PREV:
prev = pwrdm_read_prev_pwrst(pwrdm);
if (pwrdm->state != prev)
pwrdm->state_counter[prev]++;
if (prev == PWRDM_POWER_RET)
_update_logic_membank_counters(pwrdm);
break;
default:
return -EINVAL;
}
if (state != prev)
pwrdm->state_counter[state]++;
pm_dbg_update_time(pwrdm, prev);
pwrdm->state = state;
return 0;
}
static int _pwrdm_pre_transition_cb(struct powerdomain *pwrdm, void *unused)
{
pwrdm_clear_all_prev_pwrst(pwrdm);
_pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW);
return 0;
}
static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused)
{
_pwrdm_state_switch(pwrdm, PWRDM_STATE_PREV);
return 0;
}
/* Public functions */
/**
* pwrdm_init - set up the powerdomain layer
* @pwrdm_list: array of struct powerdomain pointers to register
*
* Loop through the array of powerdomains @pwrdm_list, registering all
* that are available on the current CPU. If pwrdm_list is supplied
* and not null, all of the referenced powerdomains will be
* registered. No return value. XXX pwrdm_list is not really a
* "list"; it is an array. Rename appropriately.
*/
void pwrdm_init(struct powerdomain **pwrdm_list)
{
struct powerdomain **p = NULL;
if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
pwrstctrl_reg_offs = OMAP2_PM_PWSTCTRL;
pwrstst_reg_offs = OMAP2_PM_PWSTST;
} else if (cpu_is_omap44xx()) {
pwrstctrl_reg_offs = OMAP4_PM_PWSTCTRL;
pwrstst_reg_offs = OMAP4_PM_PWSTST;
} else {
printk(KERN_ERR "Power Domain struct not supported for " \
"this CPU\n");
return;
}
if (pwrdm_list) {
for (p = pwrdm_list; *p; p++)
_pwrdm_register(*p);
}
}
/**
* pwrdm_lookup - look up a powerdomain by name, return a pointer
* @name: name of powerdomain
*
* Find a registered powerdomain by its name @name. Returns a pointer
* to the struct powerdomain if found, or NULL otherwise.
*/
struct powerdomain *pwrdm_lookup(const char *name)
{
struct powerdomain *pwrdm;
if (!name)
return NULL;
pwrdm = _pwrdm_lookup(name);
return pwrdm;
}
/**
* pwrdm_for_each - call function on each registered clockdomain
* @fn: callback function *
*
* Call the supplied function @fn for each registered powerdomain.
* The callback function @fn can return anything but 0 to bail out
* early from the iterator. Returns the last return value of the
* callback function, which should be 0 for success or anything else
* to indicate failure; or -EINVAL if the function pointer is null.
*/
int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
void *user)
{
struct powerdomain *temp_pwrdm;
int ret = 0;
if (!fn)
return -EINVAL;
list_for_each_entry(temp_pwrdm, &pwrdm_list, node) {
ret = (*fn)(temp_pwrdm, user);
if (ret)
break;
}
return ret;
}
/**
* pwrdm_add_clkdm - add a clockdomain to a powerdomain
* @pwrdm: struct powerdomain * to add the clockdomain to
* @clkdm: struct clockdomain * to associate with a powerdomain
*
* Associate the clockdomain @clkdm with a powerdomain @pwrdm. This
* enables the use of pwrdm_for_each_clkdm(). Returns -EINVAL if
* presented with invalid pointers; -ENOMEM if memory could not be allocated;
* or 0 upon success.
*/
int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm)
{
int i;
int ret = -EINVAL;
if (!pwrdm || !clkdm)
return -EINVAL;
pr_debug("powerdomain: associating clockdomain %s with powerdomain "
"%s\n", clkdm->name, pwrdm->name);
for (i = 0; i < PWRDM_MAX_CLKDMS; i++) {
if (!pwrdm->pwrdm_clkdms[i])
break;
#ifdef DEBUG
if (pwrdm->pwrdm_clkdms[i] == clkdm) {
ret = -EINVAL;
goto pac_exit;
}
#endif
}
if (i == PWRDM_MAX_CLKDMS) {
pr_debug("powerdomain: increase PWRDM_MAX_CLKDMS for "
"pwrdm %s clkdm %s\n", pwrdm->name, clkdm->name);
WARN_ON(1);
ret = -ENOMEM;
goto pac_exit;
}
pwrdm->pwrdm_clkdms[i] = clkdm;
ret = 0;
pac_exit:
return ret;
}
/**
* pwrdm_del_clkdm - remove a clockdomain from a powerdomain
* @pwrdm: struct powerdomain * to add the clockdomain to
* @clkdm: struct clockdomain * to associate with a powerdomain
*
* Dissociate the clockdomain @clkdm from the powerdomain
* @pwrdm. Returns -EINVAL if presented with invalid pointers; -ENOENT
* if @clkdm was not associated with the powerdomain, or 0 upon
* success.
*/
int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm)
{
int ret = -EINVAL;
int i;
if (!pwrdm || !clkdm)
return -EINVAL;
pr_debug("powerdomain: dissociating clockdomain %s from powerdomain "
"%s\n", clkdm->name, pwrdm->name);
for (i = 0; i < PWRDM_MAX_CLKDMS; i++)
if (pwrdm->pwrdm_clkdms[i] == clkdm)
break;
if (i == PWRDM_MAX_CLKDMS) {
pr_debug("powerdomain: clkdm %s not associated with pwrdm "
"%s ?!\n", clkdm->name, pwrdm->name);
ret = -ENOENT;
goto pdc_exit;
}
pwrdm->pwrdm_clkdms[i] = NULL;
ret = 0;
pdc_exit:
return ret;
}
/**
* pwrdm_for_each_clkdm - call function on each clkdm in a pwrdm
* @pwrdm: struct powerdomain * to iterate over
* @fn: callback function *
*
* Call the supplied function @fn for each clockdomain in the powerdomain
* @pwrdm. The callback function can return anything but 0 to bail
* out early from the iterator. Returns -EINVAL if presented with
* invalid pointers; or passes along the last return value of the
* callback function, which should be 0 for success or anything else
* to indicate failure.
*/
int pwrdm_for_each_clkdm(struct powerdomain *pwrdm,
int (*fn)(struct powerdomain *pwrdm,
struct clockdomain *clkdm))
{
int ret = 0;
int i;
if (!fn)
return -EINVAL;
for (i = 0; i < PWRDM_MAX_CLKDMS && !ret; i++)
ret = (*fn)(pwrdm, pwrdm->pwrdm_clkdms[i]);
return ret;
}
/**
* pwrdm_get_mem_bank_count - get number of memory banks in this powerdomain
* @pwrdm: struct powerdomain *
*
* Return the number of controllable memory banks in powerdomain @pwrdm,
* starting with 1. Returns -EINVAL if the powerdomain pointer is null.
*/
int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm)
{
if (!pwrdm)
return -EINVAL;
return pwrdm->banks;
}
/**
* pwrdm_set_next_pwrst - set next powerdomain power state
* @pwrdm: struct powerdomain * to set
* @pwrst: one of the PWRDM_POWER_* macros
*
* Set the powerdomain @pwrdm's next power state to @pwrst. The powerdomain
* may not enter this state immediately if the preconditions for this state
* have not been satisfied. Returns -EINVAL if the powerdomain pointer is
* null or if the power state is invalid for the powerdomin, or returns 0
* upon success.
*/
int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
{
if (!pwrdm)
return -EINVAL;
if (!(pwrdm->pwrsts & (1 << pwrst)))
return -EINVAL;
pr_debug("powerdomain: setting next powerstate for %s to %0x\n",
pwrdm->name, pwrst);
prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
(pwrst << OMAP_POWERSTATE_SHIFT),
pwrdm->prcm_offs, pwrstctrl_reg_offs);
return 0;
}
/**
* pwrdm_read_next_pwrst - get next powerdomain power state
* @pwrdm: struct powerdomain * to get power state
*
* Return the powerdomain @pwrdm's next power state. Returns -EINVAL
* if the powerdomain pointer is null or returns the next power state
* upon success.
*/
int pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
{
if (!pwrdm)
return -EINVAL;
return prm_read_mod_bits_shift(pwrdm->prcm_offs,
pwrstctrl_reg_offs, OMAP_POWERSTATE_MASK);
}
/**
* pwrdm_read_pwrst - get current powerdomain power state
* @pwrdm: struct powerdomain * to get power state
*
* Return the powerdomain @pwrdm's current power state. Returns -EINVAL
* if the powerdomain pointer is null or returns the current power state
* upon success.
*/
int pwrdm_read_pwrst(struct powerdomain *pwrdm)
{
if (!pwrdm)
return -EINVAL;
return prm_read_mod_bits_shift(pwrdm->prcm_offs,
pwrstst_reg_offs, OMAP_POWERSTATEST_MASK);
}
/**
* pwrdm_read_prev_pwrst - get previous powerdomain power state
* @pwrdm: struct powerdomain * to get previous power state
*
* Return the powerdomain @pwrdm's previous power state. Returns -EINVAL
* if the powerdomain pointer is null or returns the previous power state
* upon success.
*/
int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
{
if (!pwrdm)
return -EINVAL;
return prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST,
OMAP3430_LASTPOWERSTATEENTERED_MASK);
}
/**
* pwrdm_set_logic_retst - set powerdomain logic power state upon retention
* @pwrdm: struct powerdomain * to set
* @pwrst: one of the PWRDM_POWER_* macros
*
* Set the next power state @pwrst that the logic portion of the
* powerdomain @pwrdm will enter when the powerdomain enters retention.
* This will be either RETENTION or OFF, if supported. Returns
* -EINVAL if the powerdomain pointer is null or the target power
* state is not not supported, or returns 0 upon success.
*/
int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
{
u32 v;
if (!pwrdm)
return -EINVAL;
if (!(pwrdm->pwrsts_logic_ret & (1 << pwrst)))
return -EINVAL;
pr_debug("powerdomain: setting next logic powerstate for %s to %0x\n",
pwrdm->name, pwrst);
/*
* The register bit names below may not correspond to the
* actual names of the bits in each powerdomain's register,
* but the type of value returned is the same for each
* powerdomain.
*/
v = pwrst << __ffs(OMAP3430_LOGICL1CACHERETSTATE_MASK);
prm_rmw_mod_reg_bits(OMAP3430_LOGICL1CACHERETSTATE_MASK, v,
pwrdm->prcm_offs, pwrstctrl_reg_offs);
return 0;
}
/**
* pwrdm_set_mem_onst - set memory power state while powerdomain ON
* @pwrdm: struct powerdomain * to set
* @bank: memory bank number to set (0-3)
* @pwrst: one of the PWRDM_POWER_* macros
*
* Set the next power state @pwrst that memory bank @bank of the
* powerdomain @pwrdm will enter when the powerdomain enters the ON
* state. @bank will be a number from 0 to 3, and represents different
* types of memory, depending on the powerdomain. Returns -EINVAL if
* the powerdomain pointer is null or the target power state is not
* not supported for this memory bank, -EEXIST if the target memory
* bank does not exist or is not controllable, or returns 0 upon
* success.
*/
int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
{
u32 m;
if (!pwrdm)
return -EINVAL;
if (pwrdm->banks < (bank + 1))
return -EEXIST;
if (!(pwrdm->pwrsts_mem_on[bank] & (1 << pwrst)))
return -EINVAL;
pr_debug("powerdomain: setting next memory powerstate for domain %s "
"bank %0x while pwrdm-ON to %0x\n", pwrdm->name, bank, pwrst);
/*
* The register bit names below may not correspond to the
* actual names of the bits in each powerdomain's register,
* but the type of value returned is the same for each
* powerdomain.
*/
switch (bank) {
case 0:
m = OMAP_MEM0_ONSTATE_MASK;
break;
case 1:
m = OMAP_MEM1_ONSTATE_MASK;
break;
case 2:
m = OMAP_MEM2_ONSTATE_MASK;
break;
case 3:
m = OMAP_MEM3_ONSTATE_MASK;
break;
case 4:
m = OMAP_MEM4_ONSTATE_MASK;
break;
default:
WARN_ON(1); /* should never happen */
return -EEXIST;
}
prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)),
pwrdm->prcm_offs, pwrstctrl_reg_offs);
return 0;
}
/**
* pwrdm_set_mem_retst - set memory power state while powerdomain in RET
* @pwrdm: struct powerdomain * to set
* @bank: memory bank number to set (0-3)
* @pwrst: one of the PWRDM_POWER_* macros
*
* Set the next power state @pwrst that memory bank @bank of the
* powerdomain @pwrdm will enter when the powerdomain enters the
* RETENTION state. Bank will be a number from 0 to 3, and represents
* different types of memory, depending on the powerdomain. @pwrst
* will be either RETENTION or OFF, if supported. Returns -EINVAL if
* the powerdomain pointer is null or the target power state is not
* not supported for this memory bank, -EEXIST if the target memory
* bank does not exist or is not controllable, or returns 0 upon
* success.
*/
int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
{
u32 m;
if (!pwrdm)
return -EINVAL;
if (pwrdm->banks < (bank + 1))
return -EEXIST;
if (!(pwrdm->pwrsts_mem_ret[bank] & (1 << pwrst)))
return -EINVAL;
pr_debug("powerdomain: setting next memory powerstate for domain %s "
"bank %0x while pwrdm-RET to %0x\n", pwrdm->name, bank, pwrst);
/*
* The register bit names below may not correspond to the
* actual names of the bits in each powerdomain's register,
* but the type of value returned is the same for each
* powerdomain.
*/
switch (bank) {
case 0:
m = OMAP_MEM0_RETSTATE_MASK;
break;
case 1:
m = OMAP_MEM1_RETSTATE_MASK;
break;
case 2:
m = OMAP_MEM2_RETSTATE_MASK;
break;
case 3:
m = OMAP_MEM3_RETSTATE_MASK;
break;
case 4:
m = OMAP_MEM4_RETSTATE_MASK;
break;
default:
WARN_ON(1); /* should never happen */
return -EEXIST;
}
prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
pwrstctrl_reg_offs);
return 0;
}
/**
* pwrdm_read_logic_pwrst - get current powerdomain logic retention power state
* @pwrdm: struct powerdomain * to get current logic retention power state
*
* Return the power state that the logic portion of powerdomain @pwrdm
* will enter when the powerdomain enters retention. Returns -EINVAL
* if the powerdomain pointer is null or returns the logic retention
* power state upon success.
*/
int pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
{
if (!pwrdm)
return -EINVAL;
return prm_read_mod_bits_shift(pwrdm->prcm_offs, pwrstst_reg_offs,
OMAP3430_LOGICSTATEST_MASK);
}
/**
* pwrdm_read_prev_logic_pwrst - get previous powerdomain logic power state
* @pwrdm: struct powerdomain * to get previous logic power state
*
* Return the powerdomain @pwrdm's previous logic power state. Returns
* -EINVAL if the powerdomain pointer is null or returns the previous
* logic power state upon success.
*/
int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
{
if (!pwrdm)
return -EINVAL;
/*
* The register bit names below may not correspond to the
* actual names of the bits in each powerdomain's register,
* but the type of value returned is the same for each
* powerdomain.
*/
return prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST,
OMAP3430_LASTLOGICSTATEENTERED_MASK);
}
/**
* pwrdm_read_logic_retst - get next powerdomain logic power state
* @pwrdm: struct powerdomain * to get next logic power state
*
* Return the powerdomain pwrdm's logic power state. Returns -EINVAL
* if the powerdomain pointer is null or returns the next logic
* power state upon success.
*/
int pwrdm_read_logic_retst(struct powerdomain *pwrdm)
{
if (!pwrdm)
return -EINVAL;
/*
* The register bit names below may not correspond to the
* actual names of the bits in each powerdomain's register,
* but the type of value returned is the same for each
* powerdomain.
*/
return prm_read_mod_bits_shift(pwrdm->prcm_offs, pwrstctrl_reg_offs,
OMAP3430_LOGICSTATEST_MASK);
}
/**
* pwrdm_read_mem_pwrst - get current memory bank power state
* @pwrdm: struct powerdomain * to get current memory bank power state
* @bank: memory bank number (0-3)
*
* Return the powerdomain @pwrdm's current memory power state for bank
* @bank. Returns -EINVAL if the powerdomain pointer is null, -EEXIST if
* the target memory bank does not exist or is not controllable, or
* returns the current memory power state upon success.
*/
int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
{
u32 m;
if (!pwrdm)
return -EINVAL;
if (pwrdm->banks < (bank + 1))
return -EEXIST;
if (pwrdm->flags & PWRDM_HAS_MPU_QUIRK)
bank = 1;
/*
* The register bit names below may not correspond to the
* actual names of the bits in each powerdomain's register,
* but the type of value returned is the same for each
* powerdomain.
*/
switch (bank) {
case 0:
m = OMAP_MEM0_STATEST_MASK;
break;
case 1:
m = OMAP_MEM1_STATEST_MASK;
break;
case 2:
m = OMAP_MEM2_STATEST_MASK;
break;
case 3:
m = OMAP_MEM3_STATEST_MASK;
break;
case 4:
m = OMAP_MEM4_STATEST_MASK;
break;
default:
WARN_ON(1); /* should never happen */
return -EEXIST;
}
return prm_read_mod_bits_shift(pwrdm->prcm_offs,
pwrstst_reg_offs, m);
}
/**
* pwrdm_read_prev_mem_pwrst - get previous memory bank power state
* @pwrdm: struct powerdomain * to get previous memory bank power state
* @bank: memory bank number (0-3)
*
* Return the powerdomain @pwrdm's previous memory power state for
* bank @bank. Returns -EINVAL if the powerdomain pointer is null,
* -EEXIST if the target memory bank does not exist or is not
* controllable, or returns the previous memory power state upon
* success.
*/
int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
{
u32 m;
if (!pwrdm)
return -EINVAL;
if (pwrdm->banks < (bank + 1))
return -EEXIST;
if (pwrdm->flags & PWRDM_HAS_MPU_QUIRK)
bank = 1;
/*
* The register bit names below may not correspond to the
* actual names of the bits in each powerdomain's register,
* but the type of value returned is the same for each
* powerdomain.
*/
switch (bank) {
case 0:
m = OMAP3430_LASTMEM1STATEENTERED_MASK;
break;
case 1:
m = OMAP3430_LASTMEM2STATEENTERED_MASK;
break;
case 2:
m = OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK;
break;
case 3:
m = OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK;
break;
default:
WARN_ON(1); /* should never happen */
return -EEXIST;
}
return prm_read_mod_bits_shift(pwrdm->prcm_offs,
OMAP3430_PM_PREPWSTST, m);
}
/**
* pwrdm_read_mem_retst - get next memory bank power state
* @pwrdm: struct powerdomain * to get mext memory bank power state
* @bank: memory bank number (0-3)
*
* Return the powerdomain pwrdm's next memory power state for bank
* x. Returns -EINVAL if the powerdomain pointer is null, -EEXIST if
* the target memory bank does not exist or is not controllable, or
* returns the next memory power state upon success.
*/
int pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
{
u32 m;
if (!pwrdm)
return -EINVAL;
if (pwrdm->banks < (bank + 1))
return -EEXIST;
/*
* The register bit names below may not correspond to the
* actual names of the bits in each powerdomain's register,
* but the type of value returned is the same for each
* powerdomain.
*/
switch (bank) {
case 0:
m = OMAP_MEM0_RETSTATE_MASK;
break;
case 1:
m = OMAP_MEM1_RETSTATE_MASK;
break;
case 2:
m = OMAP_MEM2_RETSTATE_MASK;
break;
case 3:
m = OMAP_MEM3_RETSTATE_MASK;
break;
case 4:
m = OMAP_MEM4_RETSTATE_MASK;
default:
WARN_ON(1); /* should never happen */
return -EEXIST;
}
return prm_read_mod_bits_shift(pwrdm->prcm_offs,
pwrstctrl_reg_offs, m);
}
/**
* pwrdm_clear_all_prev_pwrst - clear previous powerstate register for a pwrdm
* @pwrdm: struct powerdomain * to clear
*
* Clear the powerdomain's previous power state register @pwrdm.
* Clears the entire register, including logic and memory bank
* previous power states. Returns -EINVAL if the powerdomain pointer
* is null, or returns 0 upon success.
*/
int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
{
if (!pwrdm)
return -EINVAL;
/*
* XXX should get the powerdomain's current state here;
* warn & fail if it is not ON.
*/
pr_debug("powerdomain: clearing previous power state reg for %s\n",
pwrdm->name);
prm_write_mod_reg(0, pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST);
return 0;
}
/**
* pwrdm_enable_hdwr_sar - enable automatic hardware SAR for a pwrdm
* @pwrdm: struct powerdomain *
*
* Enable automatic context save-and-restore upon power state change
* for some devices in the powerdomain @pwrdm. Warning: this only
* affects a subset of devices in a powerdomain; check the TRM
* closely. Returns -EINVAL if the powerdomain pointer is null or if
* the powerdomain does not support automatic save-and-restore, or
* returns 0 upon success.
*/
int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm)
{
if (!pwrdm)
return -EINVAL;
if (!(pwrdm->flags & PWRDM_HAS_HDWR_SAR))
return -EINVAL;
pr_debug("powerdomain: %s: setting SAVEANDRESTORE bit\n",
pwrdm->name);
prm_rmw_mod_reg_bits(0, 1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
pwrdm->prcm_offs, pwrstctrl_reg_offs);
return 0;
}
/**
* pwrdm_disable_hdwr_sar - disable automatic hardware SAR for a pwrdm
* @pwrdm: struct powerdomain *
*
* Disable automatic context save-and-restore upon power state change
* for some devices in the powerdomain @pwrdm. Warning: this only
* affects a subset of devices in a powerdomain; check the TRM
* closely. Returns -EINVAL if the powerdomain pointer is null or if
* the powerdomain does not support automatic save-and-restore, or
* returns 0 upon success.
*/
int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
{
if (!pwrdm)
return -EINVAL;
if (!(pwrdm->flags & PWRDM_HAS_HDWR_SAR))
return -EINVAL;
pr_debug("powerdomain: %s: clearing SAVEANDRESTORE bit\n",
pwrdm->name);
prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT, 0,
pwrdm->prcm_offs, pwrstctrl_reg_offs);
return 0;
}
/**
* pwrdm_has_hdwr_sar - test whether powerdomain supports hardware SAR
* @pwrdm: struct powerdomain *
*
* Returns 1 if powerdomain @pwrdm supports hardware save-and-restore
* for some devices, or 0 if it does not.
*/
bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm)
{
return (pwrdm && pwrdm->flags & PWRDM_HAS_HDWR_SAR) ? 1 : 0;
}
/**
* pwrdm_wait_transition - wait for powerdomain power transition to finish
* @pwrdm: struct powerdomain * to wait for
*
* If the powerdomain @pwrdm is in the process of a state transition,
* spin until it completes the power transition, or until an iteration
* bailout value is reached. Returns -EINVAL if the powerdomain
* pointer is null, -EAGAIN if the bailout value was reached, or
* returns 0 upon success.
*/
int pwrdm_wait_transition(struct powerdomain *pwrdm)
{
u32 c = 0;
if (!pwrdm)
return -EINVAL;
/*
* REVISIT: pwrdm_wait_transition() may be better implemented
* via a callback and a periodic timer check -- how long do we expect
* powerdomain transitions to take?
*/
/* XXX Is this udelay() value meaningful? */
while ((prm_read_mod_reg(pwrdm->prcm_offs, pwrstst_reg_offs) &
OMAP_INTRANSITION) &&
(c++ < PWRDM_TRANSITION_BAILOUT))
udelay(1);
if (c > PWRDM_TRANSITION_BAILOUT) {
printk(KERN_ERR "powerdomain: waited too long for "
"powerdomain %s to complete transition\n", pwrdm->name);
return -EAGAIN;
}
pr_debug("powerdomain: completed transition in %d loops\n", c);
return 0;
}
int pwrdm_state_switch(struct powerdomain *pwrdm)
{
return _pwrdm_state_switch(pwrdm, PWRDM_STATE_NOW);
}
int pwrdm_clkdm_state_switch(struct clockdomain *clkdm)
{
if (clkdm != NULL && clkdm->pwrdm.ptr != NULL) {
pwrdm_wait_transition(clkdm->pwrdm.ptr);
return pwrdm_state_switch(clkdm->pwrdm.ptr);
}
return -EINVAL;
}
int pwrdm_pre_transition(void)
{
pwrdm_for_each(_pwrdm_pre_transition_cb, NULL);
return 0;
}
int pwrdm_post_transition(void)
{
pwrdm_for_each(_pwrdm_post_transition_cb, NULL);
return 0;
}