fa1d8fdd23
An "N" upper letter is not a wildcard, nor can easily be identified by script, specially since the USB sysfs define things like. bNumInterfaces. Use, instead, <N>, in order to let script/get_abi.pl to convert it into a Regex. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/42778ca4b2f9bf73fafecb9b388a8fcd0e66be26.1631782432.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
138 lines
4.4 KiB
Plaintext
138 lines
4.4 KiB
Plaintext
What: /sys/class/rc/
|
|
Date: Apr 2010
|
|
KernelVersion: 2.6.35
|
|
Contact: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Description:
|
|
The rc/ class sub-directory belongs to the Remote Controller
|
|
core and provides a sysfs interface for configuring infrared
|
|
remote controller receivers.
|
|
|
|
What: /sys/class/rc/rc<N>/
|
|
Date: Apr 2010
|
|
KernelVersion: 2.6.35
|
|
Contact: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Description:
|
|
A /sys/class/rc/rcN directory is created for each remote
|
|
control receiver device where N is the number of the receiver.
|
|
|
|
What: /sys/class/rc/rc<N>/protocols
|
|
Date: Jun 2010
|
|
KernelVersion: 2.6.36
|
|
Contact: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Description:
|
|
Reading this file returns a list of available protocols,
|
|
something like::
|
|
|
|
"rc5 [rc6] nec jvc [sony]"
|
|
|
|
Enabled protocols are shown in [] brackets.
|
|
|
|
Writing "+proto" will add a protocol to the list of enabled
|
|
protocols.
|
|
|
|
Writing "-proto" will remove a protocol from the list of enabled
|
|
protocols.
|
|
|
|
Writing "proto" will enable only "proto".
|
|
|
|
Writing "none" will disable all protocols.
|
|
|
|
Write fails with EINVAL if an invalid protocol combination or
|
|
unknown protocol name is used.
|
|
|
|
What: /sys/class/rc/rc<N>/filter
|
|
Date: Jan 2014
|
|
KernelVersion: 3.15
|
|
Contact: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Description:
|
|
Sets the scancode filter expected value.
|
|
|
|
Use in combination with /sys/class/rc/rcN/filter_mask to set the
|
|
expected value of the bits set in the filter mask.
|
|
If the hardware supports it then scancodes which do not match
|
|
the filter will be ignored. Otherwise the write will fail with
|
|
an error.
|
|
|
|
This value may be reset to 0 if the current protocol is altered.
|
|
|
|
What: /sys/class/rc/rc<N>/filter_mask
|
|
Date: Jan 2014
|
|
KernelVersion: 3.15
|
|
Contact: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Description:
|
|
Sets the scancode filter mask of bits to compare.
|
|
Use in combination with /sys/class/rc/rcN/filter to set the bits
|
|
of the scancode which should be compared against the expected
|
|
value. A value of 0 disables the filter to allow all valid
|
|
scancodes to be processed.
|
|
|
|
If the hardware supports it then scancodes which do not match
|
|
the filter will be ignored. Otherwise the write will fail with
|
|
an error.
|
|
|
|
This value may be reset to 0 if the current protocol is altered.
|
|
|
|
What: /sys/class/rc/rc<N>/wakeup_protocols
|
|
Date: Feb 2017
|
|
KernelVersion: 4.11
|
|
Contact: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Description:
|
|
Reading this file returns a list of available protocols to use
|
|
for the wakeup filter, something like::
|
|
|
|
"rc-5 nec nec-x rc-6-0 rc-6-6a-24 [rc-6-6a-32] rc-6-mce"
|
|
|
|
Note that protocol variants are listed, so "nec", "sony",
|
|
"rc-5", "rc-6" have their different bit length encodings
|
|
listed if available.
|
|
|
|
The enabled wakeup protocol is shown in [] brackets.
|
|
|
|
Only one protocol can be selected at a time.
|
|
|
|
Writing "proto" will use "proto" for wakeup events.
|
|
|
|
Writing "none" will disable wakeup.
|
|
|
|
Write fails with EINVAL if an invalid protocol combination or
|
|
unknown protocol name is used, or if wakeup is not supported by
|
|
the hardware.
|
|
|
|
What: /sys/class/rc/rc<N>/wakeup_filter
|
|
Date: Jan 2014
|
|
KernelVersion: 3.15
|
|
Contact: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Description:
|
|
Sets the scancode wakeup filter expected value.
|
|
|
|
Use in combination with /sys/class/rc/rcN/wakeup_filter_mask to
|
|
set the expected value of the bits set in the wakeup filter mask
|
|
to trigger a system wake event.
|
|
|
|
If the hardware supports it and wakeup_filter_mask is not 0 then
|
|
scancodes which match the filter will wake the system from e.g.
|
|
suspend to RAM or power off.
|
|
|
|
Otherwise the write will fail with an error.
|
|
|
|
This value may be reset to 0 if the wakeup protocol is altered.
|
|
|
|
What: /sys/class/rc/rc<N>/wakeup_filter_mask
|
|
Date: Jan 2014
|
|
KernelVersion: 3.15
|
|
Contact: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Description:
|
|
Sets the scancode wakeup filter mask of bits to compare.
|
|
|
|
Use in combination with /sys/class/rc/rcN/wakeup_filter to set
|
|
the bits of the scancode which should be compared against the
|
|
expected value to trigger a system wake event.
|
|
|
|
If the hardware supports it and wakeup_filter_mask is not 0 then
|
|
scancodes which match the filter will wake the system from e.g.
|
|
suspend to RAM or power off.
|
|
|
|
Otherwise the write will fail with an error.
|
|
|
|
This value may be reset to 0 if the wakeup protocol is altered.
|