29e189c29d
The core will ensure that the device is in either STANDBY or OFF bias before suspending, restoring the bias in the driver is unneeded. Some drivers doing slightly more roundabout things have been left alone for now. Tested-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
1916 lines
54 KiB
C
1916 lines
54 KiB
C
/*
|
|
* wm8903.c -- WM8903 ALSA SoC Audio driver
|
|
*
|
|
* Copyright 2008 Wolfson Microelectronics
|
|
*
|
|
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* TODO:
|
|
* - TDM mode configuration.
|
|
* - Digital microphone support.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/init.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/platform_device.h>
|
|
#include <sound/core.h>
|
|
#include <sound/jack.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/tlv.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/soc-dapm.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/wm8903.h>
|
|
|
|
#include "wm8903.h"
|
|
|
|
/* Register defaults at reset */
|
|
static u16 wm8903_reg_defaults[] = {
|
|
0x8903, /* R0 - SW Reset and ID */
|
|
0x0000, /* R1 - Revision Number */
|
|
0x0000, /* R2 */
|
|
0x0000, /* R3 */
|
|
0x0018, /* R4 - Bias Control 0 */
|
|
0x0000, /* R5 - VMID Control 0 */
|
|
0x0000, /* R6 - Mic Bias Control 0 */
|
|
0x0000, /* R7 */
|
|
0x0001, /* R8 - Analogue DAC 0 */
|
|
0x0000, /* R9 */
|
|
0x0001, /* R10 - Analogue ADC 0 */
|
|
0x0000, /* R11 */
|
|
0x0000, /* R12 - Power Management 0 */
|
|
0x0000, /* R13 - Power Management 1 */
|
|
0x0000, /* R14 - Power Management 2 */
|
|
0x0000, /* R15 - Power Management 3 */
|
|
0x0000, /* R16 - Power Management 4 */
|
|
0x0000, /* R17 - Power Management 5 */
|
|
0x0000, /* R18 - Power Management 6 */
|
|
0x0000, /* R19 */
|
|
0x0400, /* R20 - Clock Rates 0 */
|
|
0x0D07, /* R21 - Clock Rates 1 */
|
|
0x0000, /* R22 - Clock Rates 2 */
|
|
0x0000, /* R23 */
|
|
0x0050, /* R24 - Audio Interface 0 */
|
|
0x0242, /* R25 - Audio Interface 1 */
|
|
0x0008, /* R26 - Audio Interface 2 */
|
|
0x0022, /* R27 - Audio Interface 3 */
|
|
0x0000, /* R28 */
|
|
0x0000, /* R29 */
|
|
0x00C0, /* R30 - DAC Digital Volume Left */
|
|
0x00C0, /* R31 - DAC Digital Volume Right */
|
|
0x0000, /* R32 - DAC Digital 0 */
|
|
0x0000, /* R33 - DAC Digital 1 */
|
|
0x0000, /* R34 */
|
|
0x0000, /* R35 */
|
|
0x00C0, /* R36 - ADC Digital Volume Left */
|
|
0x00C0, /* R37 - ADC Digital Volume Right */
|
|
0x0000, /* R38 - ADC Digital 0 */
|
|
0x0073, /* R39 - Digital Microphone 0 */
|
|
0x09BF, /* R40 - DRC 0 */
|
|
0x3241, /* R41 - DRC 1 */
|
|
0x0020, /* R42 - DRC 2 */
|
|
0x0000, /* R43 - DRC 3 */
|
|
0x0085, /* R44 - Analogue Left Input 0 */
|
|
0x0085, /* R45 - Analogue Right Input 0 */
|
|
0x0044, /* R46 - Analogue Left Input 1 */
|
|
0x0044, /* R47 - Analogue Right Input 1 */
|
|
0x0000, /* R48 */
|
|
0x0000, /* R49 */
|
|
0x0008, /* R50 - Analogue Left Mix 0 */
|
|
0x0004, /* R51 - Analogue Right Mix 0 */
|
|
0x0000, /* R52 - Analogue Spk Mix Left 0 */
|
|
0x0000, /* R53 - Analogue Spk Mix Left 1 */
|
|
0x0000, /* R54 - Analogue Spk Mix Right 0 */
|
|
0x0000, /* R55 - Analogue Spk Mix Right 1 */
|
|
0x0000, /* R56 */
|
|
0x002D, /* R57 - Analogue OUT1 Left */
|
|
0x002D, /* R58 - Analogue OUT1 Right */
|
|
0x0039, /* R59 - Analogue OUT2 Left */
|
|
0x0039, /* R60 - Analogue OUT2 Right */
|
|
0x0100, /* R61 */
|
|
0x0139, /* R62 - Analogue OUT3 Left */
|
|
0x0139, /* R63 - Analogue OUT3 Right */
|
|
0x0000, /* R64 */
|
|
0x0000, /* R65 - Analogue SPK Output Control 0 */
|
|
0x0000, /* R66 */
|
|
0x0010, /* R67 - DC Servo 0 */
|
|
0x0100, /* R68 */
|
|
0x00A4, /* R69 - DC Servo 2 */
|
|
0x0807, /* R70 */
|
|
0x0000, /* R71 */
|
|
0x0000, /* R72 */
|
|
0x0000, /* R73 */
|
|
0x0000, /* R74 */
|
|
0x0000, /* R75 */
|
|
0x0000, /* R76 */
|
|
0x0000, /* R77 */
|
|
0x0000, /* R78 */
|
|
0x000E, /* R79 */
|
|
0x0000, /* R80 */
|
|
0x0000, /* R81 */
|
|
0x0000, /* R82 */
|
|
0x0000, /* R83 */
|
|
0x0000, /* R84 */
|
|
0x0000, /* R85 */
|
|
0x0000, /* R86 */
|
|
0x0006, /* R87 */
|
|
0x0000, /* R88 */
|
|
0x0000, /* R89 */
|
|
0x0000, /* R90 - Analogue HP 0 */
|
|
0x0060, /* R91 */
|
|
0x0000, /* R92 */
|
|
0x0000, /* R93 */
|
|
0x0000, /* R94 - Analogue Lineout 0 */
|
|
0x0060, /* R95 */
|
|
0x0000, /* R96 */
|
|
0x0000, /* R97 */
|
|
0x0000, /* R98 - Charge Pump 0 */
|
|
0x1F25, /* R99 */
|
|
0x2B19, /* R100 */
|
|
0x01C0, /* R101 */
|
|
0x01EF, /* R102 */
|
|
0x2B00, /* R103 */
|
|
0x0000, /* R104 - Class W 0 */
|
|
0x01C0, /* R105 */
|
|
0x1C10, /* R106 */
|
|
0x0000, /* R107 */
|
|
0x0000, /* R108 - Write Sequencer 0 */
|
|
0x0000, /* R109 - Write Sequencer 1 */
|
|
0x0000, /* R110 - Write Sequencer 2 */
|
|
0x0000, /* R111 - Write Sequencer 3 */
|
|
0x0000, /* R112 - Write Sequencer 4 */
|
|
0x0000, /* R113 */
|
|
0x0000, /* R114 - Control Interface */
|
|
0x0000, /* R115 */
|
|
0x00A8, /* R116 - GPIO Control 1 */
|
|
0x00A8, /* R117 - GPIO Control 2 */
|
|
0x00A8, /* R118 - GPIO Control 3 */
|
|
0x0220, /* R119 - GPIO Control 4 */
|
|
0x01A0, /* R120 - GPIO Control 5 */
|
|
0x0000, /* R121 - Interrupt Status 1 */
|
|
0xFFFF, /* R122 - Interrupt Status 1 Mask */
|
|
0x0000, /* R123 - Interrupt Polarity 1 */
|
|
0x0000, /* R124 */
|
|
0x0003, /* R125 */
|
|
0x0000, /* R126 - Interrupt Control */
|
|
0x0000, /* R127 */
|
|
0x0005, /* R128 */
|
|
0x0000, /* R129 - Control Interface Test 1 */
|
|
0x0000, /* R130 */
|
|
0x0000, /* R131 */
|
|
0x0000, /* R132 */
|
|
0x0000, /* R133 */
|
|
0x0000, /* R134 */
|
|
0x03FF, /* R135 */
|
|
0x0007, /* R136 */
|
|
0x0040, /* R137 */
|
|
0x0000, /* R138 */
|
|
0x0000, /* R139 */
|
|
0x0000, /* R140 */
|
|
0x0000, /* R141 */
|
|
0x0000, /* R142 */
|
|
0x0000, /* R143 */
|
|
0x0000, /* R144 */
|
|
0x0000, /* R145 */
|
|
0x0000, /* R146 */
|
|
0x0000, /* R147 */
|
|
0x4000, /* R148 */
|
|
0x6810, /* R149 - Charge Pump Test 1 */
|
|
0x0004, /* R150 */
|
|
0x0000, /* R151 */
|
|
0x0000, /* R152 */
|
|
0x0000, /* R153 */
|
|
0x0000, /* R154 */
|
|
0x0000, /* R155 */
|
|
0x0000, /* R156 */
|
|
0x0000, /* R157 */
|
|
0x0000, /* R158 */
|
|
0x0000, /* R159 */
|
|
0x0000, /* R160 */
|
|
0x0000, /* R161 */
|
|
0x0000, /* R162 */
|
|
0x0000, /* R163 */
|
|
0x0028, /* R164 - Clock Rate Test 4 */
|
|
0x0004, /* R165 */
|
|
0x0000, /* R166 */
|
|
0x0060, /* R167 */
|
|
0x0000, /* R168 */
|
|
0x0000, /* R169 */
|
|
0x0000, /* R170 */
|
|
0x0000, /* R171 */
|
|
0x0000, /* R172 - Analogue Output Bias 0 */
|
|
};
|
|
|
|
struct wm8903_priv {
|
|
struct snd_soc_codec codec;
|
|
u16 reg_cache[ARRAY_SIZE(wm8903_reg_defaults)];
|
|
|
|
int sysclk;
|
|
|
|
/* Reference counts */
|
|
int class_w_users;
|
|
int playback_active;
|
|
int capture_active;
|
|
|
|
struct completion wseq;
|
|
|
|
struct snd_soc_jack *mic_jack;
|
|
int mic_det;
|
|
int mic_short;
|
|
int mic_last_report;
|
|
int mic_delay;
|
|
|
|
struct snd_pcm_substream *master_substream;
|
|
struct snd_pcm_substream *slave_substream;
|
|
};
|
|
|
|
static int wm8903_volatile_register(unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case WM8903_SW_RESET_AND_ID:
|
|
case WM8903_REVISION_NUMBER:
|
|
case WM8903_INTERRUPT_STATUS_1:
|
|
case WM8903_WRITE_SEQUENCER_4:
|
|
return 1;
|
|
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static int wm8903_run_sequence(struct snd_soc_codec *codec, unsigned int start)
|
|
{
|
|
u16 reg[5];
|
|
struct i2c_client *i2c = codec->control_data;
|
|
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
|
|
|
|
BUG_ON(start > 48);
|
|
|
|
/* Enable the sequencer if it's not already on */
|
|
reg[0] = snd_soc_read(codec, WM8903_WRITE_SEQUENCER_0);
|
|
snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0,
|
|
reg[0] | WM8903_WSEQ_ENA);
|
|
|
|
dev_dbg(&i2c->dev, "Starting sequence at %d\n", start);
|
|
|
|
snd_soc_write(codec, WM8903_WRITE_SEQUENCER_3,
|
|
start | WM8903_WSEQ_START);
|
|
|
|
/* Wait for it to complete. If we have the interrupt wired up then
|
|
* that will break us out of the poll early.
|
|
*/
|
|
do {
|
|
wait_for_completion_timeout(&wm8903->wseq,
|
|
msecs_to_jiffies(10));
|
|
|
|
reg[4] = snd_soc_read(codec, WM8903_WRITE_SEQUENCER_4);
|
|
} while (reg[4] & WM8903_WSEQ_BUSY);
|
|
|
|
dev_dbg(&i2c->dev, "Sequence complete\n");
|
|
|
|
/* Disable the sequencer again if we enabled it */
|
|
snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0, reg[0]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void wm8903_sync_reg_cache(struct snd_soc_codec *codec, u16 *cache)
|
|
{
|
|
int i;
|
|
|
|
/* There really ought to be something better we can do here :/ */
|
|
for (i = 0; i < ARRAY_SIZE(wm8903_reg_defaults); i++)
|
|
cache[i] = codec->hw_read(codec, i);
|
|
}
|
|
|
|
static void wm8903_reset(struct snd_soc_codec *codec)
|
|
{
|
|
snd_soc_write(codec, WM8903_SW_RESET_AND_ID, 0);
|
|
memcpy(codec->reg_cache, wm8903_reg_defaults,
|
|
sizeof(wm8903_reg_defaults));
|
|
}
|
|
|
|
#define WM8903_OUTPUT_SHORT 0x8
|
|
#define WM8903_OUTPUT_OUT 0x4
|
|
#define WM8903_OUTPUT_INT 0x2
|
|
#define WM8903_OUTPUT_IN 0x1
|
|
|
|
static int wm8903_cp_event(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kcontrol, int event)
|
|
{
|
|
WARN_ON(event != SND_SOC_DAPM_POST_PMU);
|
|
mdelay(4);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Event for headphone and line out amplifier power changes. Special
|
|
* power up/down sequences are required in order to maximise pop/click
|
|
* performance.
|
|
*/
|
|
static int wm8903_output_event(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kcontrol, int event)
|
|
{
|
|
struct snd_soc_codec *codec = w->codec;
|
|
u16 val;
|
|
u16 reg;
|
|
u16 dcs_reg;
|
|
u16 dcs_bit;
|
|
int shift;
|
|
|
|
switch (w->reg) {
|
|
case WM8903_POWER_MANAGEMENT_2:
|
|
reg = WM8903_ANALOGUE_HP_0;
|
|
dcs_bit = 0 + w->shift;
|
|
break;
|
|
case WM8903_POWER_MANAGEMENT_3:
|
|
reg = WM8903_ANALOGUE_LINEOUT_0;
|
|
dcs_bit = 2 + w->shift;
|
|
break;
|
|
default:
|
|
BUG();
|
|
return -EINVAL; /* Spurious warning from some compilers */
|
|
}
|
|
|
|
switch (w->shift) {
|
|
case 0:
|
|
shift = 0;
|
|
break;
|
|
case 1:
|
|
shift = 4;
|
|
break;
|
|
default:
|
|
BUG();
|
|
return -EINVAL; /* Spurious warning from some compilers */
|
|
}
|
|
|
|
if (event & SND_SOC_DAPM_PRE_PMU) {
|
|
val = snd_soc_read(codec, reg);
|
|
|
|
/* Short the output */
|
|
val &= ~(WM8903_OUTPUT_SHORT << shift);
|
|
snd_soc_write(codec, reg, val);
|
|
}
|
|
|
|
if (event & SND_SOC_DAPM_POST_PMU) {
|
|
val = snd_soc_read(codec, reg);
|
|
|
|
val |= (WM8903_OUTPUT_IN << shift);
|
|
snd_soc_write(codec, reg, val);
|
|
|
|
val |= (WM8903_OUTPUT_INT << shift);
|
|
snd_soc_write(codec, reg, val);
|
|
|
|
/* Turn on the output ENA_OUTP */
|
|
val |= (WM8903_OUTPUT_OUT << shift);
|
|
snd_soc_write(codec, reg, val);
|
|
|
|
/* Enable the DC servo */
|
|
dcs_reg = snd_soc_read(codec, WM8903_DC_SERVO_0);
|
|
dcs_reg |= dcs_bit;
|
|
snd_soc_write(codec, WM8903_DC_SERVO_0, dcs_reg);
|
|
|
|
/* Remove the short */
|
|
val |= (WM8903_OUTPUT_SHORT << shift);
|
|
snd_soc_write(codec, reg, val);
|
|
}
|
|
|
|
if (event & SND_SOC_DAPM_PRE_PMD) {
|
|
val = snd_soc_read(codec, reg);
|
|
|
|
/* Short the output */
|
|
val &= ~(WM8903_OUTPUT_SHORT << shift);
|
|
snd_soc_write(codec, reg, val);
|
|
|
|
/* Disable the DC servo */
|
|
dcs_reg = snd_soc_read(codec, WM8903_DC_SERVO_0);
|
|
dcs_reg &= ~dcs_bit;
|
|
snd_soc_write(codec, WM8903_DC_SERVO_0, dcs_reg);
|
|
|
|
/* Then disable the intermediate and output stages */
|
|
val &= ~((WM8903_OUTPUT_OUT | WM8903_OUTPUT_INT |
|
|
WM8903_OUTPUT_IN) << shift);
|
|
snd_soc_write(codec, reg, val);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* When used with DAC outputs only the WM8903 charge pump supports
|
|
* operation in class W mode, providing very low power consumption
|
|
* when used with digital sources. Enable and disable this mode
|
|
* automatically depending on the mixer configuration.
|
|
*
|
|
* All the relevant controls are simple switches.
|
|
*/
|
|
static int wm8903_class_w_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
|
|
struct snd_soc_codec *codec = widget->codec;
|
|
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
|
|
struct i2c_client *i2c = codec->control_data;
|
|
u16 reg;
|
|
int ret;
|
|
|
|
reg = snd_soc_read(codec, WM8903_CLASS_W_0);
|
|
|
|
/* Turn it off if we're about to enable bypass */
|
|
if (ucontrol->value.integer.value[0]) {
|
|
if (wm8903->class_w_users == 0) {
|
|
dev_dbg(&i2c->dev, "Disabling Class W\n");
|
|
snd_soc_write(codec, WM8903_CLASS_W_0, reg &
|
|
~(WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V));
|
|
}
|
|
wm8903->class_w_users++;
|
|
}
|
|
|
|
/* Implement the change */
|
|
ret = snd_soc_dapm_put_volsw(kcontrol, ucontrol);
|
|
|
|
/* If we've just disabled the last bypass path turn Class W on */
|
|
if (!ucontrol->value.integer.value[0]) {
|
|
if (wm8903->class_w_users == 1) {
|
|
dev_dbg(&i2c->dev, "Enabling Class W\n");
|
|
snd_soc_write(codec, WM8903_CLASS_W_0, reg |
|
|
WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V);
|
|
}
|
|
wm8903->class_w_users--;
|
|
}
|
|
|
|
dev_dbg(&i2c->dev, "Bypass use count now %d\n",
|
|
wm8903->class_w_users);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#define SOC_DAPM_SINGLE_W(xname, reg, shift, max, invert) \
|
|
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
|
|
.info = snd_soc_info_volsw, \
|
|
.get = snd_soc_dapm_get_volsw, .put = wm8903_class_w_put, \
|
|
.private_value = SOC_SINGLE_VALUE(reg, shift, max, invert) }
|
|
|
|
|
|
/* ALSA can only do steps of .01dB */
|
|
static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1);
|
|
|
|
static const DECLARE_TLV_DB_SCALE(digital_sidetone_tlv, -3600, 300, 0);
|
|
static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0);
|
|
|
|
static const DECLARE_TLV_DB_SCALE(drc_tlv_thresh, 0, 75, 0);
|
|
static const DECLARE_TLV_DB_SCALE(drc_tlv_amp, -2250, 75, 0);
|
|
static const DECLARE_TLV_DB_SCALE(drc_tlv_min, 0, 600, 0);
|
|
static const DECLARE_TLV_DB_SCALE(drc_tlv_max, 1200, 600, 0);
|
|
static const DECLARE_TLV_DB_SCALE(drc_tlv_startup, -300, 50, 0);
|
|
|
|
static const char *drc_slope_text[] = {
|
|
"1", "1/2", "1/4", "1/8", "1/16", "0"
|
|
};
|
|
|
|
static const struct soc_enum drc_slope_r0 =
|
|
SOC_ENUM_SINGLE(WM8903_DRC_2, 3, 6, drc_slope_text);
|
|
|
|
static const struct soc_enum drc_slope_r1 =
|
|
SOC_ENUM_SINGLE(WM8903_DRC_2, 0, 6, drc_slope_text);
|
|
|
|
static const char *drc_attack_text[] = {
|
|
"instantaneous",
|
|
"363us", "762us", "1.45ms", "2.9ms", "5.8ms", "11.6ms", "23.2ms",
|
|
"46.4ms", "92.8ms", "185.6ms"
|
|
};
|
|
|
|
static const struct soc_enum drc_attack =
|
|
SOC_ENUM_SINGLE(WM8903_DRC_1, 12, 11, drc_attack_text);
|
|
|
|
static const char *drc_decay_text[] = {
|
|
"186ms", "372ms", "743ms", "1.49s", "2.97s", "5.94s", "11.89s",
|
|
"23.87s", "47.56s"
|
|
};
|
|
|
|
static const struct soc_enum drc_decay =
|
|
SOC_ENUM_SINGLE(WM8903_DRC_1, 8, 9, drc_decay_text);
|
|
|
|
static const char *drc_ff_delay_text[] = {
|
|
"5 samples", "9 samples"
|
|
};
|
|
|
|
static const struct soc_enum drc_ff_delay =
|
|
SOC_ENUM_SINGLE(WM8903_DRC_0, 5, 2, drc_ff_delay_text);
|
|
|
|
static const char *drc_qr_decay_text[] = {
|
|
"0.725ms", "1.45ms", "5.8ms"
|
|
};
|
|
|
|
static const struct soc_enum drc_qr_decay =
|
|
SOC_ENUM_SINGLE(WM8903_DRC_1, 4, 3, drc_qr_decay_text);
|
|
|
|
static const char *drc_smoothing_text[] = {
|
|
"Low", "Medium", "High"
|
|
};
|
|
|
|
static const struct soc_enum drc_smoothing =
|
|
SOC_ENUM_SINGLE(WM8903_DRC_0, 11, 3, drc_smoothing_text);
|
|
|
|
static const char *soft_mute_text[] = {
|
|
"Fast (fs/2)", "Slow (fs/32)"
|
|
};
|
|
|
|
static const struct soc_enum soft_mute =
|
|
SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_1, 10, 2, soft_mute_text);
|
|
|
|
static const char *mute_mode_text[] = {
|
|
"Hard", "Soft"
|
|
};
|
|
|
|
static const struct soc_enum mute_mode =
|
|
SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_1, 9, 2, mute_mode_text);
|
|
|
|
static const char *dac_deemphasis_text[] = {
|
|
"Disabled", "32kHz", "44.1kHz", "48kHz"
|
|
};
|
|
|
|
static const struct soc_enum dac_deemphasis =
|
|
SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_1, 1, 4, dac_deemphasis_text);
|
|
|
|
static const char *companding_text[] = {
|
|
"ulaw", "alaw"
|
|
};
|
|
|
|
static const struct soc_enum dac_companding =
|
|
SOC_ENUM_SINGLE(WM8903_AUDIO_INTERFACE_0, 0, 2, companding_text);
|
|
|
|
static const struct soc_enum adc_companding =
|
|
SOC_ENUM_SINGLE(WM8903_AUDIO_INTERFACE_0, 2, 2, companding_text);
|
|
|
|
static const char *input_mode_text[] = {
|
|
"Single-Ended", "Differential Line", "Differential Mic"
|
|
};
|
|
|
|
static const struct soc_enum linput_mode_enum =
|
|
SOC_ENUM_SINGLE(WM8903_ANALOGUE_LEFT_INPUT_1, 0, 3, input_mode_text);
|
|
|
|
static const struct soc_enum rinput_mode_enum =
|
|
SOC_ENUM_SINGLE(WM8903_ANALOGUE_RIGHT_INPUT_1, 0, 3, input_mode_text);
|
|
|
|
static const char *linput_mux_text[] = {
|
|
"IN1L", "IN2L", "IN3L"
|
|
};
|
|
|
|
static const struct soc_enum linput_enum =
|
|
SOC_ENUM_SINGLE(WM8903_ANALOGUE_LEFT_INPUT_1, 2, 3, linput_mux_text);
|
|
|
|
static const struct soc_enum linput_inv_enum =
|
|
SOC_ENUM_SINGLE(WM8903_ANALOGUE_LEFT_INPUT_1, 4, 3, linput_mux_text);
|
|
|
|
static const char *rinput_mux_text[] = {
|
|
"IN1R", "IN2R", "IN3R"
|
|
};
|
|
|
|
static const struct soc_enum rinput_enum =
|
|
SOC_ENUM_SINGLE(WM8903_ANALOGUE_RIGHT_INPUT_1, 2, 3, rinput_mux_text);
|
|
|
|
static const struct soc_enum rinput_inv_enum =
|
|
SOC_ENUM_SINGLE(WM8903_ANALOGUE_RIGHT_INPUT_1, 4, 3, rinput_mux_text);
|
|
|
|
|
|
static const char *sidetone_text[] = {
|
|
"None", "Left", "Right"
|
|
};
|
|
|
|
static const struct soc_enum lsidetone_enum =
|
|
SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_0, 2, 3, sidetone_text);
|
|
|
|
static const struct soc_enum rsidetone_enum =
|
|
SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_0, 0, 3, sidetone_text);
|
|
|
|
static const struct snd_kcontrol_new wm8903_snd_controls[] = {
|
|
|
|
/* Input PGAs - No TLV since the scale depends on PGA mode */
|
|
SOC_SINGLE("Left Input PGA Switch", WM8903_ANALOGUE_LEFT_INPUT_0,
|
|
7, 1, 1),
|
|
SOC_SINGLE("Left Input PGA Volume", WM8903_ANALOGUE_LEFT_INPUT_0,
|
|
0, 31, 0),
|
|
SOC_SINGLE("Left Input PGA Common Mode Switch", WM8903_ANALOGUE_LEFT_INPUT_1,
|
|
6, 1, 0),
|
|
|
|
SOC_SINGLE("Right Input PGA Switch", WM8903_ANALOGUE_RIGHT_INPUT_0,
|
|
7, 1, 1),
|
|
SOC_SINGLE("Right Input PGA Volume", WM8903_ANALOGUE_RIGHT_INPUT_0,
|
|
0, 31, 0),
|
|
SOC_SINGLE("Right Input PGA Common Mode Switch", WM8903_ANALOGUE_RIGHT_INPUT_1,
|
|
6, 1, 0),
|
|
|
|
/* ADCs */
|
|
SOC_SINGLE("DRC Switch", WM8903_DRC_0, 15, 1, 0),
|
|
SOC_ENUM("DRC Compressor Slope R0", drc_slope_r0),
|
|
SOC_ENUM("DRC Compressor Slope R1", drc_slope_r1),
|
|
SOC_SINGLE_TLV("DRC Compressor Threshold Volume", WM8903_DRC_3, 5, 124, 1,
|
|
drc_tlv_thresh),
|
|
SOC_SINGLE_TLV("DRC Volume", WM8903_DRC_3, 0, 30, 1, drc_tlv_amp),
|
|
SOC_SINGLE_TLV("DRC Minimum Gain Volume", WM8903_DRC_1, 2, 3, 1, drc_tlv_min),
|
|
SOC_SINGLE_TLV("DRC Maximum Gain Volume", WM8903_DRC_1, 0, 3, 0, drc_tlv_max),
|
|
SOC_ENUM("DRC Attack Rate", drc_attack),
|
|
SOC_ENUM("DRC Decay Rate", drc_decay),
|
|
SOC_ENUM("DRC FF Delay", drc_ff_delay),
|
|
SOC_SINGLE("DRC Anticlip Switch", WM8903_DRC_0, 1, 1, 0),
|
|
SOC_SINGLE("DRC QR Switch", WM8903_DRC_0, 2, 1, 0),
|
|
SOC_SINGLE_TLV("DRC QR Threshold Volume", WM8903_DRC_0, 6, 3, 0, drc_tlv_max),
|
|
SOC_ENUM("DRC QR Decay Rate", drc_qr_decay),
|
|
SOC_SINGLE("DRC Smoothing Switch", WM8903_DRC_0, 3, 1, 0),
|
|
SOC_SINGLE("DRC Smoothing Hysteresis Switch", WM8903_DRC_0, 0, 1, 0),
|
|
SOC_ENUM("DRC Smoothing Threshold", drc_smoothing),
|
|
SOC_SINGLE_TLV("DRC Startup Volume", WM8903_DRC_0, 6, 18, 0, drc_tlv_startup),
|
|
|
|
SOC_DOUBLE_R_TLV("Digital Capture Volume", WM8903_ADC_DIGITAL_VOLUME_LEFT,
|
|
WM8903_ADC_DIGITAL_VOLUME_RIGHT, 1, 96, 0, digital_tlv),
|
|
SOC_ENUM("ADC Companding Mode", adc_companding),
|
|
SOC_SINGLE("ADC Companding Switch", WM8903_AUDIO_INTERFACE_0, 3, 1, 0),
|
|
|
|
SOC_DOUBLE_TLV("Digital Sidetone Volume", WM8903_DAC_DIGITAL_0, 4, 8,
|
|
12, 0, digital_sidetone_tlv),
|
|
|
|
/* DAC */
|
|
SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8903_DAC_DIGITAL_VOLUME_LEFT,
|
|
WM8903_DAC_DIGITAL_VOLUME_RIGHT, 1, 120, 0, digital_tlv),
|
|
SOC_ENUM("DAC Soft Mute Rate", soft_mute),
|
|
SOC_ENUM("DAC Mute Mode", mute_mode),
|
|
SOC_SINGLE("DAC Mono Switch", WM8903_DAC_DIGITAL_1, 12, 1, 0),
|
|
SOC_ENUM("DAC De-emphasis", dac_deemphasis),
|
|
SOC_ENUM("DAC Companding Mode", dac_companding),
|
|
SOC_SINGLE("DAC Companding Switch", WM8903_AUDIO_INTERFACE_0, 1, 1, 0),
|
|
|
|
/* Headphones */
|
|
SOC_DOUBLE_R("Headphone Switch",
|
|
WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT,
|
|
8, 1, 1),
|
|
SOC_DOUBLE_R("Headphone ZC Switch",
|
|
WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT,
|
|
6, 1, 0),
|
|
SOC_DOUBLE_R_TLV("Headphone Volume",
|
|
WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT,
|
|
0, 63, 0, out_tlv),
|
|
|
|
/* Line out */
|
|
SOC_DOUBLE_R("Line Out Switch",
|
|
WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT,
|
|
8, 1, 1),
|
|
SOC_DOUBLE_R("Line Out ZC Switch",
|
|
WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT,
|
|
6, 1, 0),
|
|
SOC_DOUBLE_R_TLV("Line Out Volume",
|
|
WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT,
|
|
0, 63, 0, out_tlv),
|
|
|
|
/* Speaker */
|
|
SOC_DOUBLE_R("Speaker Switch",
|
|
WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT, 8, 1, 1),
|
|
SOC_DOUBLE_R("Speaker ZC Switch",
|
|
WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT, 6, 1, 0),
|
|
SOC_DOUBLE_R_TLV("Speaker Volume",
|
|
WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT,
|
|
0, 63, 0, out_tlv),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new linput_mode_mux =
|
|
SOC_DAPM_ENUM("Left Input Mode Mux", linput_mode_enum);
|
|
|
|
static const struct snd_kcontrol_new rinput_mode_mux =
|
|
SOC_DAPM_ENUM("Right Input Mode Mux", rinput_mode_enum);
|
|
|
|
static const struct snd_kcontrol_new linput_mux =
|
|
SOC_DAPM_ENUM("Left Input Mux", linput_enum);
|
|
|
|
static const struct snd_kcontrol_new linput_inv_mux =
|
|
SOC_DAPM_ENUM("Left Inverting Input Mux", linput_inv_enum);
|
|
|
|
static const struct snd_kcontrol_new rinput_mux =
|
|
SOC_DAPM_ENUM("Right Input Mux", rinput_enum);
|
|
|
|
static const struct snd_kcontrol_new rinput_inv_mux =
|
|
SOC_DAPM_ENUM("Right Inverting Input Mux", rinput_inv_enum);
|
|
|
|
static const struct snd_kcontrol_new lsidetone_mux =
|
|
SOC_DAPM_ENUM("DACL Sidetone Mux", lsidetone_enum);
|
|
|
|
static const struct snd_kcontrol_new rsidetone_mux =
|
|
SOC_DAPM_ENUM("DACR Sidetone Mux", rsidetone_enum);
|
|
|
|
static const struct snd_kcontrol_new left_output_mixer[] = {
|
|
SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_LEFT_MIX_0, 3, 1, 0),
|
|
SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_LEFT_MIX_0, 2, 1, 0),
|
|
SOC_DAPM_SINGLE_W("Left Bypass Switch", WM8903_ANALOGUE_LEFT_MIX_0, 1, 1, 0),
|
|
SOC_DAPM_SINGLE_W("Right Bypass Switch", WM8903_ANALOGUE_LEFT_MIX_0, 0, 1, 0),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new right_output_mixer[] = {
|
|
SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 3, 1, 0),
|
|
SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 2, 1, 0),
|
|
SOC_DAPM_SINGLE_W("Left Bypass Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 1, 1, 0),
|
|
SOC_DAPM_SINGLE_W("Right Bypass Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 0, 1, 0),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new left_speaker_mixer[] = {
|
|
SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 3, 1, 0),
|
|
SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 2, 1, 0),
|
|
SOC_DAPM_SINGLE("Left Bypass Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 1, 1, 0),
|
|
SOC_DAPM_SINGLE("Right Bypass Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0,
|
|
0, 1, 0),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new right_speaker_mixer[] = {
|
|
SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, 3, 1, 0),
|
|
SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, 2, 1, 0),
|
|
SOC_DAPM_SINGLE("Left Bypass Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0,
|
|
1, 1, 0),
|
|
SOC_DAPM_SINGLE("Right Bypass Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0,
|
|
0, 1, 0),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_widget wm8903_dapm_widgets[] = {
|
|
SND_SOC_DAPM_INPUT("IN1L"),
|
|
SND_SOC_DAPM_INPUT("IN1R"),
|
|
SND_SOC_DAPM_INPUT("IN2L"),
|
|
SND_SOC_DAPM_INPUT("IN2R"),
|
|
SND_SOC_DAPM_INPUT("IN3L"),
|
|
SND_SOC_DAPM_INPUT("IN3R"),
|
|
|
|
SND_SOC_DAPM_OUTPUT("HPOUTL"),
|
|
SND_SOC_DAPM_OUTPUT("HPOUTR"),
|
|
SND_SOC_DAPM_OUTPUT("LINEOUTL"),
|
|
SND_SOC_DAPM_OUTPUT("LINEOUTR"),
|
|
SND_SOC_DAPM_OUTPUT("LOP"),
|
|
SND_SOC_DAPM_OUTPUT("LON"),
|
|
SND_SOC_DAPM_OUTPUT("ROP"),
|
|
SND_SOC_DAPM_OUTPUT("RON"),
|
|
|
|
SND_SOC_DAPM_MICBIAS("Mic Bias", WM8903_MIC_BIAS_CONTROL_0, 0, 0),
|
|
|
|
SND_SOC_DAPM_MUX("Left Input Mux", SND_SOC_NOPM, 0, 0, &linput_mux),
|
|
SND_SOC_DAPM_MUX("Left Input Inverting Mux", SND_SOC_NOPM, 0, 0,
|
|
&linput_inv_mux),
|
|
SND_SOC_DAPM_MUX("Left Input Mode Mux", SND_SOC_NOPM, 0, 0, &linput_mode_mux),
|
|
|
|
SND_SOC_DAPM_MUX("Right Input Mux", SND_SOC_NOPM, 0, 0, &rinput_mux),
|
|
SND_SOC_DAPM_MUX("Right Input Inverting Mux", SND_SOC_NOPM, 0, 0,
|
|
&rinput_inv_mux),
|
|
SND_SOC_DAPM_MUX("Right Input Mode Mux", SND_SOC_NOPM, 0, 0, &rinput_mode_mux),
|
|
|
|
SND_SOC_DAPM_PGA("Left Input PGA", WM8903_POWER_MANAGEMENT_0, 1, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("Right Input PGA", WM8903_POWER_MANAGEMENT_0, 0, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_ADC("ADCL", "Left HiFi Capture", WM8903_POWER_MANAGEMENT_6, 1, 0),
|
|
SND_SOC_DAPM_ADC("ADCR", "Right HiFi Capture", WM8903_POWER_MANAGEMENT_6, 0, 0),
|
|
|
|
SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &lsidetone_mux),
|
|
SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &rsidetone_mux),
|
|
|
|
SND_SOC_DAPM_DAC("DACL", "Left Playback", WM8903_POWER_MANAGEMENT_6, 3, 0),
|
|
SND_SOC_DAPM_DAC("DACR", "Right Playback", WM8903_POWER_MANAGEMENT_6, 2, 0),
|
|
|
|
SND_SOC_DAPM_MIXER("Left Output Mixer", WM8903_POWER_MANAGEMENT_1, 1, 0,
|
|
left_output_mixer, ARRAY_SIZE(left_output_mixer)),
|
|
SND_SOC_DAPM_MIXER("Right Output Mixer", WM8903_POWER_MANAGEMENT_1, 0, 0,
|
|
right_output_mixer, ARRAY_SIZE(right_output_mixer)),
|
|
|
|
SND_SOC_DAPM_MIXER("Left Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 1, 0,
|
|
left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)),
|
|
SND_SOC_DAPM_MIXER("Right Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 0, 0,
|
|
right_speaker_mixer, ARRAY_SIZE(right_speaker_mixer)),
|
|
|
|
SND_SOC_DAPM_PGA_E("Left Headphone Output PGA", WM8903_POWER_MANAGEMENT_2,
|
|
1, 0, NULL, 0, wm8903_output_event,
|
|
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
|
|
SND_SOC_DAPM_PRE_PMD),
|
|
SND_SOC_DAPM_PGA_E("Right Headphone Output PGA", WM8903_POWER_MANAGEMENT_2,
|
|
0, 0, NULL, 0, wm8903_output_event,
|
|
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
|
|
SND_SOC_DAPM_PRE_PMD),
|
|
|
|
SND_SOC_DAPM_PGA_E("Left Line Output PGA", WM8903_POWER_MANAGEMENT_3, 1, 0,
|
|
NULL, 0, wm8903_output_event,
|
|
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
|
|
SND_SOC_DAPM_PRE_PMD),
|
|
SND_SOC_DAPM_PGA_E("Right Line Output PGA", WM8903_POWER_MANAGEMENT_3, 0, 0,
|
|
NULL, 0, wm8903_output_event,
|
|
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
|
|
SND_SOC_DAPM_PRE_PMD),
|
|
|
|
SND_SOC_DAPM_PGA("Left Speaker PGA", WM8903_POWER_MANAGEMENT_5, 1, 0,
|
|
NULL, 0),
|
|
SND_SOC_DAPM_PGA("Right Speaker PGA", WM8903_POWER_MANAGEMENT_5, 0, 0,
|
|
NULL, 0),
|
|
|
|
SND_SOC_DAPM_SUPPLY("Charge Pump", WM8903_CHARGE_PUMP_0, 0, 0,
|
|
wm8903_cp_event, SND_SOC_DAPM_POST_PMU),
|
|
SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8903_CLOCK_RATES_2, 1, 0, NULL, 0),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route intercon[] = {
|
|
|
|
{ "Left Input Mux", "IN1L", "IN1L" },
|
|
{ "Left Input Mux", "IN2L", "IN2L" },
|
|
{ "Left Input Mux", "IN3L", "IN3L" },
|
|
|
|
{ "Left Input Inverting Mux", "IN1L", "IN1L" },
|
|
{ "Left Input Inverting Mux", "IN2L", "IN2L" },
|
|
{ "Left Input Inverting Mux", "IN3L", "IN3L" },
|
|
|
|
{ "Right Input Mux", "IN1R", "IN1R" },
|
|
{ "Right Input Mux", "IN2R", "IN2R" },
|
|
{ "Right Input Mux", "IN3R", "IN3R" },
|
|
|
|
{ "Right Input Inverting Mux", "IN1R", "IN1R" },
|
|
{ "Right Input Inverting Mux", "IN2R", "IN2R" },
|
|
{ "Right Input Inverting Mux", "IN3R", "IN3R" },
|
|
|
|
{ "Left Input Mode Mux", "Single-Ended", "Left Input Inverting Mux" },
|
|
{ "Left Input Mode Mux", "Differential Line",
|
|
"Left Input Mux" },
|
|
{ "Left Input Mode Mux", "Differential Line",
|
|
"Left Input Inverting Mux" },
|
|
{ "Left Input Mode Mux", "Differential Mic",
|
|
"Left Input Mux" },
|
|
{ "Left Input Mode Mux", "Differential Mic",
|
|
"Left Input Inverting Mux" },
|
|
|
|
{ "Right Input Mode Mux", "Single-Ended",
|
|
"Right Input Inverting Mux" },
|
|
{ "Right Input Mode Mux", "Differential Line",
|
|
"Right Input Mux" },
|
|
{ "Right Input Mode Mux", "Differential Line",
|
|
"Right Input Inverting Mux" },
|
|
{ "Right Input Mode Mux", "Differential Mic",
|
|
"Right Input Mux" },
|
|
{ "Right Input Mode Mux", "Differential Mic",
|
|
"Right Input Inverting Mux" },
|
|
|
|
{ "Left Input PGA", NULL, "Left Input Mode Mux" },
|
|
{ "Right Input PGA", NULL, "Right Input Mode Mux" },
|
|
|
|
{ "ADCL", NULL, "Left Input PGA" },
|
|
{ "ADCL", NULL, "CLK_DSP" },
|
|
{ "ADCR", NULL, "Right Input PGA" },
|
|
{ "ADCR", NULL, "CLK_DSP" },
|
|
|
|
{ "DACL Sidetone", "Left", "ADCL" },
|
|
{ "DACL Sidetone", "Right", "ADCR" },
|
|
{ "DACR Sidetone", "Left", "ADCL" },
|
|
{ "DACR Sidetone", "Right", "ADCR" },
|
|
|
|
{ "DACL", NULL, "DACL Sidetone" },
|
|
{ "DACL", NULL, "CLK_DSP" },
|
|
{ "DACR", NULL, "DACR Sidetone" },
|
|
{ "DACR", NULL, "CLK_DSP" },
|
|
|
|
{ "Left Output Mixer", "Left Bypass Switch", "Left Input PGA" },
|
|
{ "Left Output Mixer", "Right Bypass Switch", "Right Input PGA" },
|
|
{ "Left Output Mixer", "DACL Switch", "DACL" },
|
|
{ "Left Output Mixer", "DACR Switch", "DACR" },
|
|
|
|
{ "Right Output Mixer", "Left Bypass Switch", "Left Input PGA" },
|
|
{ "Right Output Mixer", "Right Bypass Switch", "Right Input PGA" },
|
|
{ "Right Output Mixer", "DACL Switch", "DACL" },
|
|
{ "Right Output Mixer", "DACR Switch", "DACR" },
|
|
|
|
{ "Left Speaker Mixer", "Left Bypass Switch", "Left Input PGA" },
|
|
{ "Left Speaker Mixer", "Right Bypass Switch", "Right Input PGA" },
|
|
{ "Left Speaker Mixer", "DACL Switch", "DACL" },
|
|
{ "Left Speaker Mixer", "DACR Switch", "DACR" },
|
|
|
|
{ "Right Speaker Mixer", "Left Bypass Switch", "Left Input PGA" },
|
|
{ "Right Speaker Mixer", "Right Bypass Switch", "Right Input PGA" },
|
|
{ "Right Speaker Mixer", "DACL Switch", "DACL" },
|
|
{ "Right Speaker Mixer", "DACR Switch", "DACR" },
|
|
|
|
{ "Left Line Output PGA", NULL, "Left Output Mixer" },
|
|
{ "Right Line Output PGA", NULL, "Right Output Mixer" },
|
|
|
|
{ "Left Headphone Output PGA", NULL, "Left Output Mixer" },
|
|
{ "Right Headphone Output PGA", NULL, "Right Output Mixer" },
|
|
|
|
{ "Left Speaker PGA", NULL, "Left Speaker Mixer" },
|
|
{ "Right Speaker PGA", NULL, "Right Speaker Mixer" },
|
|
|
|
{ "HPOUTL", NULL, "Left Headphone Output PGA" },
|
|
{ "HPOUTR", NULL, "Right Headphone Output PGA" },
|
|
|
|
{ "LINEOUTL", NULL, "Left Line Output PGA" },
|
|
{ "LINEOUTR", NULL, "Right Line Output PGA" },
|
|
|
|
{ "LOP", NULL, "Left Speaker PGA" },
|
|
{ "LON", NULL, "Left Speaker PGA" },
|
|
|
|
{ "ROP", NULL, "Right Speaker PGA" },
|
|
{ "RON", NULL, "Right Speaker PGA" },
|
|
|
|
{ "Left Headphone Output PGA", NULL, "Charge Pump" },
|
|
{ "Right Headphone Output PGA", NULL, "Charge Pump" },
|
|
{ "Left Line Output PGA", NULL, "Charge Pump" },
|
|
{ "Right Line Output PGA", NULL, "Charge Pump" },
|
|
};
|
|
|
|
static int wm8903_add_widgets(struct snd_soc_codec *codec)
|
|
{
|
|
snd_soc_dapm_new_controls(codec, wm8903_dapm_widgets,
|
|
ARRAY_SIZE(wm8903_dapm_widgets));
|
|
|
|
snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8903_set_bias_level(struct snd_soc_codec *codec,
|
|
enum snd_soc_bias_level level)
|
|
{
|
|
struct i2c_client *i2c = codec->control_data;
|
|
u16 reg, reg2;
|
|
|
|
switch (level) {
|
|
case SND_SOC_BIAS_ON:
|
|
case SND_SOC_BIAS_PREPARE:
|
|
reg = snd_soc_read(codec, WM8903_VMID_CONTROL_0);
|
|
reg &= ~(WM8903_VMID_RES_MASK);
|
|
reg |= WM8903_VMID_RES_50K;
|
|
snd_soc_write(codec, WM8903_VMID_CONTROL_0, reg);
|
|
break;
|
|
|
|
case SND_SOC_BIAS_STANDBY:
|
|
if (codec->bias_level == SND_SOC_BIAS_OFF) {
|
|
snd_soc_write(codec, WM8903_CLOCK_RATES_2,
|
|
WM8903_CLK_SYS_ENA);
|
|
|
|
/* Change DC servo dither level in startup sequence */
|
|
snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0, 0x11);
|
|
snd_soc_write(codec, WM8903_WRITE_SEQUENCER_1, 0x1257);
|
|
snd_soc_write(codec, WM8903_WRITE_SEQUENCER_2, 0x2);
|
|
|
|
wm8903_run_sequence(codec, 0);
|
|
wm8903_sync_reg_cache(codec, codec->reg_cache);
|
|
|
|
/* Enable low impedence charge pump output */
|
|
reg = snd_soc_read(codec,
|
|
WM8903_CONTROL_INTERFACE_TEST_1);
|
|
snd_soc_write(codec, WM8903_CONTROL_INTERFACE_TEST_1,
|
|
reg | WM8903_TEST_KEY);
|
|
reg2 = snd_soc_read(codec, WM8903_CHARGE_PUMP_TEST_1);
|
|
snd_soc_write(codec, WM8903_CHARGE_PUMP_TEST_1,
|
|
reg2 | WM8903_CP_SW_KELVIN_MODE_MASK);
|
|
snd_soc_write(codec, WM8903_CONTROL_INTERFACE_TEST_1,
|
|
reg);
|
|
|
|
/* By default no bypass paths are enabled so
|
|
* enable Class W support.
|
|
*/
|
|
dev_dbg(&i2c->dev, "Enabling Class W\n");
|
|
snd_soc_write(codec, WM8903_CLASS_W_0, reg |
|
|
WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V);
|
|
}
|
|
|
|
reg = snd_soc_read(codec, WM8903_VMID_CONTROL_0);
|
|
reg &= ~(WM8903_VMID_RES_MASK);
|
|
reg |= WM8903_VMID_RES_250K;
|
|
snd_soc_write(codec, WM8903_VMID_CONTROL_0, reg);
|
|
break;
|
|
|
|
case SND_SOC_BIAS_OFF:
|
|
wm8903_run_sequence(codec, 32);
|
|
reg = snd_soc_read(codec, WM8903_CLOCK_RATES_2);
|
|
reg &= ~WM8903_CLK_SYS_ENA;
|
|
snd_soc_write(codec, WM8903_CLOCK_RATES_2, reg);
|
|
break;
|
|
}
|
|
|
|
codec->bias_level = level;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8903_set_dai_sysclk(struct snd_soc_dai *codec_dai,
|
|
int clk_id, unsigned int freq, int dir)
|
|
{
|
|
struct snd_soc_codec *codec = codec_dai->codec;
|
|
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
|
|
|
|
wm8903->sysclk = freq;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8903_set_dai_fmt(struct snd_soc_dai *codec_dai,
|
|
unsigned int fmt)
|
|
{
|
|
struct snd_soc_codec *codec = codec_dai->codec;
|
|
u16 aif1 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_1);
|
|
|
|
aif1 &= ~(WM8903_LRCLK_DIR | WM8903_BCLK_DIR | WM8903_AIF_FMT_MASK |
|
|
WM8903_AIF_LRCLK_INV | WM8903_AIF_BCLK_INV);
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
break;
|
|
case SND_SOC_DAIFMT_CBS_CFM:
|
|
aif1 |= WM8903_LRCLK_DIR;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
aif1 |= WM8903_LRCLK_DIR | WM8903_BCLK_DIR;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBM_CFS:
|
|
aif1 |= WM8903_BCLK_DIR;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
aif1 |= 0x3;
|
|
break;
|
|
case SND_SOC_DAIFMT_DSP_B:
|
|
aif1 |= 0x3 | WM8903_AIF_LRCLK_INV;
|
|
break;
|
|
case SND_SOC_DAIFMT_I2S:
|
|
aif1 |= 0x2;
|
|
break;
|
|
case SND_SOC_DAIFMT_RIGHT_J:
|
|
aif1 |= 0x1;
|
|
break;
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Clock inversion */
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
case SND_SOC_DAIFMT_DSP_B:
|
|
/* frame inversion not valid for DSP modes */
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
aif1 |= WM8903_AIF_BCLK_INV;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
case SND_SOC_DAIFMT_I2S:
|
|
case SND_SOC_DAIFMT_RIGHT_J:
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_IF:
|
|
aif1 |= WM8903_AIF_BCLK_INV | WM8903_AIF_LRCLK_INV;
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
aif1 |= WM8903_AIF_BCLK_INV;
|
|
break;
|
|
case SND_SOC_DAIFMT_NB_IF:
|
|
aif1 |= WM8903_AIF_LRCLK_INV;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
snd_soc_write(codec, WM8903_AUDIO_INTERFACE_1, aif1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8903_digital_mute(struct snd_soc_dai *codec_dai, int mute)
|
|
{
|
|
struct snd_soc_codec *codec = codec_dai->codec;
|
|
u16 reg;
|
|
|
|
reg = snd_soc_read(codec, WM8903_DAC_DIGITAL_1);
|
|
|
|
if (mute)
|
|
reg |= WM8903_DAC_MUTE;
|
|
else
|
|
reg &= ~WM8903_DAC_MUTE;
|
|
|
|
snd_soc_write(codec, WM8903_DAC_DIGITAL_1, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Lookup table for CLK_SYS/fs ratio. 256fs or more is recommended
|
|
* for optimal performance so we list the lower rates first and match
|
|
* on the last match we find. */
|
|
static struct {
|
|
int div;
|
|
int rate;
|
|
int mode;
|
|
int mclk_div;
|
|
} clk_sys_ratios[] = {
|
|
{ 64, 0x0, 0x0, 1 },
|
|
{ 68, 0x0, 0x1, 1 },
|
|
{ 125, 0x0, 0x2, 1 },
|
|
{ 128, 0x1, 0x0, 1 },
|
|
{ 136, 0x1, 0x1, 1 },
|
|
{ 192, 0x2, 0x0, 1 },
|
|
{ 204, 0x2, 0x1, 1 },
|
|
|
|
{ 64, 0x0, 0x0, 2 },
|
|
{ 68, 0x0, 0x1, 2 },
|
|
{ 125, 0x0, 0x2, 2 },
|
|
{ 128, 0x1, 0x0, 2 },
|
|
{ 136, 0x1, 0x1, 2 },
|
|
{ 192, 0x2, 0x0, 2 },
|
|
{ 204, 0x2, 0x1, 2 },
|
|
|
|
{ 250, 0x2, 0x2, 1 },
|
|
{ 256, 0x3, 0x0, 1 },
|
|
{ 272, 0x3, 0x1, 1 },
|
|
{ 384, 0x4, 0x0, 1 },
|
|
{ 408, 0x4, 0x1, 1 },
|
|
{ 375, 0x4, 0x2, 1 },
|
|
{ 512, 0x5, 0x0, 1 },
|
|
{ 544, 0x5, 0x1, 1 },
|
|
{ 500, 0x5, 0x2, 1 },
|
|
{ 768, 0x6, 0x0, 1 },
|
|
{ 816, 0x6, 0x1, 1 },
|
|
{ 750, 0x6, 0x2, 1 },
|
|
{ 1024, 0x7, 0x0, 1 },
|
|
{ 1088, 0x7, 0x1, 1 },
|
|
{ 1000, 0x7, 0x2, 1 },
|
|
{ 1408, 0x8, 0x0, 1 },
|
|
{ 1496, 0x8, 0x1, 1 },
|
|
{ 1536, 0x9, 0x0, 1 },
|
|
{ 1632, 0x9, 0x1, 1 },
|
|
{ 1500, 0x9, 0x2, 1 },
|
|
|
|
{ 250, 0x2, 0x2, 2 },
|
|
{ 256, 0x3, 0x0, 2 },
|
|
{ 272, 0x3, 0x1, 2 },
|
|
{ 384, 0x4, 0x0, 2 },
|
|
{ 408, 0x4, 0x1, 2 },
|
|
{ 375, 0x4, 0x2, 2 },
|
|
{ 512, 0x5, 0x0, 2 },
|
|
{ 544, 0x5, 0x1, 2 },
|
|
{ 500, 0x5, 0x2, 2 },
|
|
{ 768, 0x6, 0x0, 2 },
|
|
{ 816, 0x6, 0x1, 2 },
|
|
{ 750, 0x6, 0x2, 2 },
|
|
{ 1024, 0x7, 0x0, 2 },
|
|
{ 1088, 0x7, 0x1, 2 },
|
|
{ 1000, 0x7, 0x2, 2 },
|
|
{ 1408, 0x8, 0x0, 2 },
|
|
{ 1496, 0x8, 0x1, 2 },
|
|
{ 1536, 0x9, 0x0, 2 },
|
|
{ 1632, 0x9, 0x1, 2 },
|
|
{ 1500, 0x9, 0x2, 2 },
|
|
};
|
|
|
|
/* CLK_SYS/BCLK ratios - multiplied by 10 due to .5s */
|
|
static struct {
|
|
int ratio;
|
|
int div;
|
|
} bclk_divs[] = {
|
|
{ 10, 0 },
|
|
{ 20, 2 },
|
|
{ 30, 3 },
|
|
{ 40, 4 },
|
|
{ 50, 5 },
|
|
{ 60, 7 },
|
|
{ 80, 8 },
|
|
{ 100, 9 },
|
|
{ 120, 11 },
|
|
{ 160, 12 },
|
|
{ 200, 13 },
|
|
{ 220, 14 },
|
|
{ 240, 15 },
|
|
{ 300, 17 },
|
|
{ 320, 18 },
|
|
{ 440, 19 },
|
|
{ 480, 20 },
|
|
};
|
|
|
|
/* Sample rates for DSP */
|
|
static struct {
|
|
int rate;
|
|
int value;
|
|
} sample_rates[] = {
|
|
{ 8000, 0 },
|
|
{ 11025, 1 },
|
|
{ 12000, 2 },
|
|
{ 16000, 3 },
|
|
{ 22050, 4 },
|
|
{ 24000, 5 },
|
|
{ 32000, 6 },
|
|
{ 44100, 7 },
|
|
{ 48000, 8 },
|
|
{ 88200, 9 },
|
|
{ 96000, 10 },
|
|
{ 0, 0 },
|
|
};
|
|
|
|
static int wm8903_startup(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
|
struct snd_soc_device *socdev = rtd->socdev;
|
|
struct snd_soc_codec *codec = socdev->card->codec;
|
|
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
|
|
struct i2c_client *i2c = codec->control_data;
|
|
struct snd_pcm_runtime *master_runtime;
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
wm8903->playback_active++;
|
|
else
|
|
wm8903->capture_active++;
|
|
|
|
/* The DAI has shared clocks so if we already have a playback or
|
|
* capture going then constrain this substream to match it.
|
|
*/
|
|
if (wm8903->master_substream) {
|
|
master_runtime = wm8903->master_substream->runtime;
|
|
|
|
dev_dbg(&i2c->dev, "Constraining to %d bits\n",
|
|
master_runtime->sample_bits);
|
|
|
|
snd_pcm_hw_constraint_minmax(substream->runtime,
|
|
SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
|
|
master_runtime->sample_bits,
|
|
master_runtime->sample_bits);
|
|
|
|
wm8903->slave_substream = substream;
|
|
} else
|
|
wm8903->master_substream = substream;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void wm8903_shutdown(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
|
struct snd_soc_device *socdev = rtd->socdev;
|
|
struct snd_soc_codec *codec = socdev->card->codec;
|
|
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
wm8903->playback_active--;
|
|
else
|
|
wm8903->capture_active--;
|
|
|
|
if (wm8903->master_substream == substream)
|
|
wm8903->master_substream = wm8903->slave_substream;
|
|
|
|
wm8903->slave_substream = NULL;
|
|
}
|
|
|
|
static int wm8903_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
|
struct snd_soc_device *socdev = rtd->socdev;
|
|
struct snd_soc_codec *codec = socdev->card->codec;
|
|
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
|
|
struct i2c_client *i2c = codec->control_data;
|
|
int fs = params_rate(params);
|
|
int bclk;
|
|
int bclk_div;
|
|
int i;
|
|
int dsp_config;
|
|
int clk_config;
|
|
int best_val;
|
|
int cur_val;
|
|
int clk_sys;
|
|
|
|
u16 aif1 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_1);
|
|
u16 aif2 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_2);
|
|
u16 aif3 = snd_soc_read(codec, WM8903_AUDIO_INTERFACE_3);
|
|
u16 clock0 = snd_soc_read(codec, WM8903_CLOCK_RATES_0);
|
|
u16 clock1 = snd_soc_read(codec, WM8903_CLOCK_RATES_1);
|
|
u16 dac_digital1 = snd_soc_read(codec, WM8903_DAC_DIGITAL_1);
|
|
|
|
if (substream == wm8903->slave_substream) {
|
|
dev_dbg(&i2c->dev, "Ignoring hw_params for slave substream\n");
|
|
return 0;
|
|
}
|
|
|
|
/* Enable sloping stopband filter for low sample rates */
|
|
if (fs <= 24000)
|
|
dac_digital1 |= WM8903_DAC_SB_FILT;
|
|
else
|
|
dac_digital1 &= ~WM8903_DAC_SB_FILT;
|
|
|
|
/* Configure sample rate logic for DSP - choose nearest rate */
|
|
dsp_config = 0;
|
|
best_val = abs(sample_rates[dsp_config].rate - fs);
|
|
for (i = 1; i < ARRAY_SIZE(sample_rates); i++) {
|
|
cur_val = abs(sample_rates[i].rate - fs);
|
|
if (cur_val <= best_val) {
|
|
dsp_config = i;
|
|
best_val = cur_val;
|
|
}
|
|
}
|
|
|
|
/* Constraints should stop us hitting this but let's make sure */
|
|
if (wm8903->capture_active)
|
|
switch (sample_rates[dsp_config].rate) {
|
|
case 88200:
|
|
case 96000:
|
|
dev_err(&i2c->dev, "%dHz unsupported by ADC\n",
|
|
fs);
|
|
return -EINVAL;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
dev_dbg(&i2c->dev, "DSP fs = %dHz\n", sample_rates[dsp_config].rate);
|
|
clock1 &= ~WM8903_SAMPLE_RATE_MASK;
|
|
clock1 |= sample_rates[dsp_config].value;
|
|
|
|
aif1 &= ~WM8903_AIF_WL_MASK;
|
|
bclk = 2 * fs;
|
|
switch (params_format(params)) {
|
|
case SNDRV_PCM_FORMAT_S16_LE:
|
|
bclk *= 16;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S20_3LE:
|
|
bclk *= 20;
|
|
aif1 |= 0x4;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S24_LE:
|
|
bclk *= 24;
|
|
aif1 |= 0x8;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S32_LE:
|
|
bclk *= 32;
|
|
aif1 |= 0xc;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev_dbg(&i2c->dev, "MCLK = %dHz, target sample rate = %dHz\n",
|
|
wm8903->sysclk, fs);
|
|
|
|
/* We may not have an MCLK which allows us to generate exactly
|
|
* the clock we want, particularly with USB derived inputs, so
|
|
* approximate.
|
|
*/
|
|
clk_config = 0;
|
|
best_val = abs((wm8903->sysclk /
|
|
(clk_sys_ratios[0].mclk_div *
|
|
clk_sys_ratios[0].div)) - fs);
|
|
for (i = 1; i < ARRAY_SIZE(clk_sys_ratios); i++) {
|
|
cur_val = abs((wm8903->sysclk /
|
|
(clk_sys_ratios[i].mclk_div *
|
|
clk_sys_ratios[i].div)) - fs);
|
|
|
|
if (cur_val <= best_val) {
|
|
clk_config = i;
|
|
best_val = cur_val;
|
|
}
|
|
}
|
|
|
|
if (clk_sys_ratios[clk_config].mclk_div == 2) {
|
|
clock0 |= WM8903_MCLKDIV2;
|
|
clk_sys = wm8903->sysclk / 2;
|
|
} else {
|
|
clock0 &= ~WM8903_MCLKDIV2;
|
|
clk_sys = wm8903->sysclk;
|
|
}
|
|
|
|
clock1 &= ~(WM8903_CLK_SYS_RATE_MASK |
|
|
WM8903_CLK_SYS_MODE_MASK);
|
|
clock1 |= clk_sys_ratios[clk_config].rate << WM8903_CLK_SYS_RATE_SHIFT;
|
|
clock1 |= clk_sys_ratios[clk_config].mode << WM8903_CLK_SYS_MODE_SHIFT;
|
|
|
|
dev_dbg(&i2c->dev, "CLK_SYS_RATE=%x, CLK_SYS_MODE=%x div=%d\n",
|
|
clk_sys_ratios[clk_config].rate,
|
|
clk_sys_ratios[clk_config].mode,
|
|
clk_sys_ratios[clk_config].div);
|
|
|
|
dev_dbg(&i2c->dev, "Actual CLK_SYS = %dHz\n", clk_sys);
|
|
|
|
/* We may not get quite the right frequency if using
|
|
* approximate clocks so look for the closest match that is
|
|
* higher than the target (we need to ensure that there enough
|
|
* BCLKs to clock out the samples).
|
|
*/
|
|
bclk_div = 0;
|
|
best_val = ((clk_sys * 10) / bclk_divs[0].ratio) - bclk;
|
|
i = 1;
|
|
while (i < ARRAY_SIZE(bclk_divs)) {
|
|
cur_val = ((clk_sys * 10) / bclk_divs[i].ratio) - bclk;
|
|
if (cur_val < 0) /* BCLK table is sorted */
|
|
break;
|
|
bclk_div = i;
|
|
best_val = cur_val;
|
|
i++;
|
|
}
|
|
|
|
aif2 &= ~WM8903_BCLK_DIV_MASK;
|
|
aif3 &= ~WM8903_LRCLK_RATE_MASK;
|
|
|
|
dev_dbg(&i2c->dev, "BCLK ratio %d for %dHz - actual BCLK = %dHz\n",
|
|
bclk_divs[bclk_div].ratio / 10, bclk,
|
|
(clk_sys * 10) / bclk_divs[bclk_div].ratio);
|
|
|
|
aif2 |= bclk_divs[bclk_div].div;
|
|
aif3 |= bclk / fs;
|
|
|
|
snd_soc_write(codec, WM8903_CLOCK_RATES_0, clock0);
|
|
snd_soc_write(codec, WM8903_CLOCK_RATES_1, clock1);
|
|
snd_soc_write(codec, WM8903_AUDIO_INTERFACE_1, aif1);
|
|
snd_soc_write(codec, WM8903_AUDIO_INTERFACE_2, aif2);
|
|
snd_soc_write(codec, WM8903_AUDIO_INTERFACE_3, aif3);
|
|
snd_soc_write(codec, WM8903_DAC_DIGITAL_1, dac_digital1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* wm8903_mic_detect - Enable microphone detection via the WM8903 IRQ
|
|
*
|
|
* @codec: WM8903 codec
|
|
* @jack: jack to report detection events on
|
|
* @det: value to report for presence detection
|
|
* @shrt: value to report for short detection
|
|
*
|
|
* Enable microphone detection via IRQ on the WM8903. If GPIOs are
|
|
* being used to bring out signals to the processor then only platform
|
|
* data configuration is needed for WM8903 and processor GPIOs should
|
|
* be configured using snd_soc_jack_add_gpios() instead.
|
|
*
|
|
* The current threasholds for detection should be configured using
|
|
* micdet_cfg in the platform data. Using this function will force on
|
|
* the microphone bias for the device.
|
|
*/
|
|
int wm8903_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack,
|
|
int det, int shrt)
|
|
{
|
|
struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
|
|
int irq_mask = WM8903_MICDET_EINT | WM8903_MICSHRT_EINT;
|
|
|
|
dev_dbg(codec->dev, "Enabling microphone detection: %x %x\n",
|
|
det, shrt);
|
|
|
|
/* Store the configuration */
|
|
wm8903->mic_jack = jack;
|
|
wm8903->mic_det = det;
|
|
wm8903->mic_short = shrt;
|
|
|
|
/* Enable interrupts we've got a report configured for */
|
|
if (det)
|
|
irq_mask &= ~WM8903_MICDET_EINT;
|
|
if (shrt)
|
|
irq_mask &= ~WM8903_MICSHRT_EINT;
|
|
|
|
snd_soc_update_bits(codec, WM8903_INTERRUPT_STATUS_1_MASK,
|
|
WM8903_MICDET_EINT | WM8903_MICSHRT_EINT,
|
|
irq_mask);
|
|
|
|
if (det && shrt) {
|
|
/* Enable mic detection, this may not have been set through
|
|
* platform data (eg, if the defaults are OK). */
|
|
snd_soc_update_bits(codec, WM8903_WRITE_SEQUENCER_0,
|
|
WM8903_WSEQ_ENA, WM8903_WSEQ_ENA);
|
|
snd_soc_update_bits(codec, WM8903_MIC_BIAS_CONTROL_0,
|
|
WM8903_MICDET_ENA, WM8903_MICDET_ENA);
|
|
} else {
|
|
snd_soc_update_bits(codec, WM8903_MIC_BIAS_CONTROL_0,
|
|
WM8903_MICDET_ENA, 0);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(wm8903_mic_detect);
|
|
|
|
static irqreturn_t wm8903_irq(int irq, void *data)
|
|
{
|
|
struct wm8903_priv *wm8903 = data;
|
|
struct snd_soc_codec *codec = &wm8903->codec;
|
|
int mic_report;
|
|
int int_pol;
|
|
int int_val = 0;
|
|
int mask = ~snd_soc_read(codec, WM8903_INTERRUPT_STATUS_1_MASK);
|
|
|
|
int_val = snd_soc_read(codec, WM8903_INTERRUPT_STATUS_1) & mask;
|
|
|
|
if (int_val & WM8903_WSEQ_BUSY_EINT) {
|
|
dev_dbg(codec->dev, "Write sequencer done\n");
|
|
complete(&wm8903->wseq);
|
|
}
|
|
|
|
/*
|
|
* The rest is microphone jack detection. We need to manually
|
|
* invert the polarity of the interrupt after each event - to
|
|
* simplify the code keep track of the last state we reported
|
|
* and just invert the relevant bits in both the report and
|
|
* the polarity register.
|
|
*/
|
|
mic_report = wm8903->mic_last_report;
|
|
int_pol = snd_soc_read(codec, WM8903_INTERRUPT_POLARITY_1);
|
|
|
|
if (int_val & WM8903_MICSHRT_EINT) {
|
|
dev_dbg(codec->dev, "Microphone short (pol=%x)\n", int_pol);
|
|
|
|
mic_report ^= wm8903->mic_short;
|
|
int_pol ^= WM8903_MICSHRT_INV;
|
|
}
|
|
|
|
if (int_val & WM8903_MICDET_EINT) {
|
|
dev_dbg(codec->dev, "Microphone detect (pol=%x)\n", int_pol);
|
|
|
|
mic_report ^= wm8903->mic_det;
|
|
int_pol ^= WM8903_MICDET_INV;
|
|
|
|
msleep(wm8903->mic_delay);
|
|
}
|
|
|
|
snd_soc_update_bits(codec, WM8903_INTERRUPT_POLARITY_1,
|
|
WM8903_MICSHRT_INV | WM8903_MICDET_INV, int_pol);
|
|
|
|
snd_soc_jack_report(wm8903->mic_jack, mic_report,
|
|
wm8903->mic_short | wm8903->mic_det);
|
|
|
|
wm8903->mic_last_report = mic_report;
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#define WM8903_PLAYBACK_RATES (SNDRV_PCM_RATE_8000 |\
|
|
SNDRV_PCM_RATE_11025 | \
|
|
SNDRV_PCM_RATE_16000 | \
|
|
SNDRV_PCM_RATE_22050 | \
|
|
SNDRV_PCM_RATE_32000 | \
|
|
SNDRV_PCM_RATE_44100 | \
|
|
SNDRV_PCM_RATE_48000 | \
|
|
SNDRV_PCM_RATE_88200 | \
|
|
SNDRV_PCM_RATE_96000)
|
|
|
|
#define WM8903_CAPTURE_RATES (SNDRV_PCM_RATE_8000 |\
|
|
SNDRV_PCM_RATE_11025 | \
|
|
SNDRV_PCM_RATE_16000 | \
|
|
SNDRV_PCM_RATE_22050 | \
|
|
SNDRV_PCM_RATE_32000 | \
|
|
SNDRV_PCM_RATE_44100 | \
|
|
SNDRV_PCM_RATE_48000)
|
|
|
|
#define WM8903_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
|
|
SNDRV_PCM_FMTBIT_S20_3LE |\
|
|
SNDRV_PCM_FMTBIT_S24_LE)
|
|
|
|
static struct snd_soc_dai_ops wm8903_dai_ops = {
|
|
.startup = wm8903_startup,
|
|
.shutdown = wm8903_shutdown,
|
|
.hw_params = wm8903_hw_params,
|
|
.digital_mute = wm8903_digital_mute,
|
|
.set_fmt = wm8903_set_dai_fmt,
|
|
.set_sysclk = wm8903_set_dai_sysclk,
|
|
};
|
|
|
|
struct snd_soc_dai wm8903_dai = {
|
|
.name = "WM8903",
|
|
.playback = {
|
|
.stream_name = "Playback",
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = WM8903_PLAYBACK_RATES,
|
|
.formats = WM8903_FORMATS,
|
|
},
|
|
.capture = {
|
|
.stream_name = "Capture",
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = WM8903_CAPTURE_RATES,
|
|
.formats = WM8903_FORMATS,
|
|
},
|
|
.ops = &wm8903_dai_ops,
|
|
.symmetric_rates = 1,
|
|
};
|
|
EXPORT_SYMBOL_GPL(wm8903_dai);
|
|
|
|
static int wm8903_suspend(struct platform_device *pdev, pm_message_t state)
|
|
{
|
|
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
|
|
struct snd_soc_codec *codec = socdev->card->codec;
|
|
|
|
wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8903_resume(struct platform_device *pdev)
|
|
{
|
|
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
|
|
struct snd_soc_codec *codec = socdev->card->codec;
|
|
struct i2c_client *i2c = codec->control_data;
|
|
int i;
|
|
u16 *reg_cache = codec->reg_cache;
|
|
u16 *tmp_cache = kmemdup(reg_cache, sizeof(wm8903_reg_defaults),
|
|
GFP_KERNEL);
|
|
|
|
/* Bring the codec back up to standby first to minimise pop/clicks */
|
|
wm8903_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
|
|
|
|
/* Sync back everything else */
|
|
if (tmp_cache) {
|
|
for (i = 2; i < ARRAY_SIZE(wm8903_reg_defaults); i++)
|
|
if (tmp_cache[i] != reg_cache[i])
|
|
snd_soc_write(codec, i, tmp_cache[i]);
|
|
kfree(tmp_cache);
|
|
} else {
|
|
dev_err(&i2c->dev, "Failed to allocate temporary cache\n");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct snd_soc_codec *wm8903_codec;
|
|
|
|
static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct wm8903_platform_data *pdata = dev_get_platdata(&i2c->dev);
|
|
struct wm8903_priv *wm8903;
|
|
struct snd_soc_codec *codec;
|
|
int ret, i;
|
|
int trigger, irq_pol;
|
|
u16 val;
|
|
|
|
wm8903 = kzalloc(sizeof(struct wm8903_priv), GFP_KERNEL);
|
|
if (wm8903 == NULL)
|
|
return -ENOMEM;
|
|
|
|
codec = &wm8903->codec;
|
|
|
|
mutex_init(&codec->mutex);
|
|
INIT_LIST_HEAD(&codec->dapm_widgets);
|
|
INIT_LIST_HEAD(&codec->dapm_paths);
|
|
|
|
codec->dev = &i2c->dev;
|
|
codec->name = "WM8903";
|
|
codec->owner = THIS_MODULE;
|
|
codec->bias_level = SND_SOC_BIAS_OFF;
|
|
codec->set_bias_level = wm8903_set_bias_level;
|
|
codec->dai = &wm8903_dai;
|
|
codec->num_dai = 1;
|
|
codec->reg_cache_size = ARRAY_SIZE(wm8903->reg_cache);
|
|
codec->reg_cache = &wm8903->reg_cache[0];
|
|
snd_soc_codec_set_drvdata(codec, wm8903);
|
|
codec->volatile_register = wm8903_volatile_register;
|
|
init_completion(&wm8903->wseq);
|
|
|
|
i2c_set_clientdata(i2c, codec);
|
|
codec->control_data = i2c;
|
|
|
|
ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
|
|
if (ret != 0) {
|
|
dev_err(&i2c->dev, "Failed to set cache I/O: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
val = snd_soc_read(codec, WM8903_SW_RESET_AND_ID);
|
|
if (val != wm8903_reg_defaults[WM8903_SW_RESET_AND_ID]) {
|
|
dev_err(&i2c->dev,
|
|
"Device with ID register %x is not a WM8903\n", val);
|
|
return -ENODEV;
|
|
}
|
|
|
|
val = snd_soc_read(codec, WM8903_REVISION_NUMBER);
|
|
dev_info(&i2c->dev, "WM8903 revision %d\n",
|
|
val & WM8903_CHIP_REV_MASK);
|
|
|
|
wm8903_reset(codec);
|
|
|
|
/* Set up GPIOs and microphone detection */
|
|
if (pdata) {
|
|
for (i = 0; i < ARRAY_SIZE(pdata->gpio_cfg); i++) {
|
|
if (!pdata->gpio_cfg[i])
|
|
continue;
|
|
|
|
snd_soc_write(codec, WM8903_GPIO_CONTROL_1 + i,
|
|
pdata->gpio_cfg[i] & 0xffff);
|
|
}
|
|
|
|
snd_soc_write(codec, WM8903_MIC_BIAS_CONTROL_0,
|
|
pdata->micdet_cfg);
|
|
|
|
/* Microphone detection needs the WSEQ clock */
|
|
if (pdata->micdet_cfg)
|
|
snd_soc_update_bits(codec, WM8903_WRITE_SEQUENCER_0,
|
|
WM8903_WSEQ_ENA, WM8903_WSEQ_ENA);
|
|
|
|
wm8903->mic_delay = pdata->micdet_delay;
|
|
}
|
|
|
|
if (i2c->irq) {
|
|
if (pdata && pdata->irq_active_low) {
|
|
trigger = IRQF_TRIGGER_LOW;
|
|
irq_pol = WM8903_IRQ_POL;
|
|
} else {
|
|
trigger = IRQF_TRIGGER_HIGH;
|
|
irq_pol = 0;
|
|
}
|
|
|
|
snd_soc_update_bits(codec, WM8903_INTERRUPT_CONTROL,
|
|
WM8903_IRQ_POL, irq_pol);
|
|
|
|
ret = request_threaded_irq(i2c->irq, NULL, wm8903_irq,
|
|
trigger | IRQF_ONESHOT,
|
|
"wm8903", wm8903);
|
|
if (ret != 0) {
|
|
dev_err(&i2c->dev, "Failed to request IRQ: %d\n",
|
|
ret);
|
|
goto err;
|
|
}
|
|
|
|
/* Enable write sequencer interrupts */
|
|
snd_soc_update_bits(codec, WM8903_INTERRUPT_STATUS_1_MASK,
|
|
WM8903_IM_WSEQ_BUSY_EINT, 0);
|
|
}
|
|
|
|
/* power on device */
|
|
wm8903_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
|
|
|
|
/* Latch volume update bits */
|
|
val = snd_soc_read(codec, WM8903_ADC_DIGITAL_VOLUME_LEFT);
|
|
val |= WM8903_ADCVU;
|
|
snd_soc_write(codec, WM8903_ADC_DIGITAL_VOLUME_LEFT, val);
|
|
snd_soc_write(codec, WM8903_ADC_DIGITAL_VOLUME_RIGHT, val);
|
|
|
|
val = snd_soc_read(codec, WM8903_DAC_DIGITAL_VOLUME_LEFT);
|
|
val |= WM8903_DACVU;
|
|
snd_soc_write(codec, WM8903_DAC_DIGITAL_VOLUME_LEFT, val);
|
|
snd_soc_write(codec, WM8903_DAC_DIGITAL_VOLUME_RIGHT, val);
|
|
|
|
val = snd_soc_read(codec, WM8903_ANALOGUE_OUT1_LEFT);
|
|
val |= WM8903_HPOUTVU;
|
|
snd_soc_write(codec, WM8903_ANALOGUE_OUT1_LEFT, val);
|
|
snd_soc_write(codec, WM8903_ANALOGUE_OUT1_RIGHT, val);
|
|
|
|
val = snd_soc_read(codec, WM8903_ANALOGUE_OUT2_LEFT);
|
|
val |= WM8903_LINEOUTVU;
|
|
snd_soc_write(codec, WM8903_ANALOGUE_OUT2_LEFT, val);
|
|
snd_soc_write(codec, WM8903_ANALOGUE_OUT2_RIGHT, val);
|
|
|
|
val = snd_soc_read(codec, WM8903_ANALOGUE_OUT3_LEFT);
|
|
val |= WM8903_SPKVU;
|
|
snd_soc_write(codec, WM8903_ANALOGUE_OUT3_LEFT, val);
|
|
snd_soc_write(codec, WM8903_ANALOGUE_OUT3_RIGHT, val);
|
|
|
|
/* Enable DAC soft mute by default */
|
|
val = snd_soc_read(codec, WM8903_DAC_DIGITAL_1);
|
|
val |= WM8903_DAC_MUTEMODE;
|
|
snd_soc_write(codec, WM8903_DAC_DIGITAL_1, val);
|
|
|
|
wm8903_dai.dev = &i2c->dev;
|
|
wm8903_codec = codec;
|
|
|
|
ret = snd_soc_register_codec(codec);
|
|
if (ret != 0) {
|
|
dev_err(&i2c->dev, "Failed to register codec: %d\n", ret);
|
|
goto err_irq;
|
|
}
|
|
|
|
ret = snd_soc_register_dai(&wm8903_dai);
|
|
if (ret != 0) {
|
|
dev_err(&i2c->dev, "Failed to register DAI: %d\n", ret);
|
|
goto err_codec;
|
|
}
|
|
|
|
return ret;
|
|
|
|
err_codec:
|
|
snd_soc_unregister_codec(codec);
|
|
err_irq:
|
|
if (i2c->irq)
|
|
free_irq(i2c->irq, wm8903);
|
|
err:
|
|
wm8903_codec = NULL;
|
|
kfree(wm8903);
|
|
return ret;
|
|
}
|
|
|
|
static __devexit int wm8903_i2c_remove(struct i2c_client *client)
|
|
{
|
|
struct snd_soc_codec *codec = i2c_get_clientdata(client);
|
|
struct wm8903_priv *priv = snd_soc_codec_get_drvdata(codec);
|
|
|
|
snd_soc_unregister_dai(&wm8903_dai);
|
|
snd_soc_unregister_codec(codec);
|
|
|
|
wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF);
|
|
|
|
if (client->irq)
|
|
free_irq(client->irq, priv);
|
|
|
|
kfree(priv);
|
|
|
|
wm8903_codec = NULL;
|
|
wm8903_dai.dev = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* i2c codec control layer */
|
|
static const struct i2c_device_id wm8903_i2c_id[] = {
|
|
{ "wm8903", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, wm8903_i2c_id);
|
|
|
|
static struct i2c_driver wm8903_i2c_driver = {
|
|
.driver = {
|
|
.name = "WM8903",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = wm8903_i2c_probe,
|
|
.remove = __devexit_p(wm8903_i2c_remove),
|
|
.id_table = wm8903_i2c_id,
|
|
};
|
|
|
|
static int wm8903_probe(struct platform_device *pdev)
|
|
{
|
|
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
|
|
int ret = 0;
|
|
|
|
if (!wm8903_codec) {
|
|
dev_err(&pdev->dev, "I2C device not yet probed\n");
|
|
goto err;
|
|
}
|
|
|
|
socdev->card->codec = wm8903_codec;
|
|
|
|
/* register pcms */
|
|
ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed to create pcms\n");
|
|
goto err;
|
|
}
|
|
|
|
snd_soc_add_controls(socdev->card->codec, wm8903_snd_controls,
|
|
ARRAY_SIZE(wm8903_snd_controls));
|
|
wm8903_add_widgets(socdev->card->codec);
|
|
|
|
return ret;
|
|
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
/* power down chip */
|
|
static int wm8903_remove(struct platform_device *pdev)
|
|
{
|
|
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
|
|
struct snd_soc_codec *codec = socdev->card->codec;
|
|
|
|
if (codec->control_data)
|
|
wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF);
|
|
|
|
snd_soc_free_pcms(socdev);
|
|
snd_soc_dapm_free(socdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct snd_soc_codec_device soc_codec_dev_wm8903 = {
|
|
.probe = wm8903_probe,
|
|
.remove = wm8903_remove,
|
|
.suspend = wm8903_suspend,
|
|
.resume = wm8903_resume,
|
|
};
|
|
EXPORT_SYMBOL_GPL(soc_codec_dev_wm8903);
|
|
|
|
static int __init wm8903_modinit(void)
|
|
{
|
|
return i2c_add_driver(&wm8903_i2c_driver);
|
|
}
|
|
module_init(wm8903_modinit);
|
|
|
|
static void __exit wm8903_exit(void)
|
|
{
|
|
i2c_del_driver(&wm8903_i2c_driver);
|
|
}
|
|
module_exit(wm8903_exit);
|
|
|
|
MODULE_DESCRIPTION("ASoC WM8903 driver");
|
|
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.cm>");
|
|
MODULE_LICENSE("GPL");
|