kevin/linux
1
Fork 0
Code
26f91fd54d
linux/include/asm-arm/arch-s3c2410
History
Ben Dooks 26f91fd54d [ARM] 3443/1: [S3C2410] Improve IRQ entry code 
Patch from Ben Dooks

Remove the old debug from the IRQ entry code,
update the comments on the handling of the
IRQ registers.

The message "bad interrupt offset" is removed
as it is only helpful for debugging, and can
cause printk() flooding when under load.

Make the code to deal with GPIO interrupts
faster, and use the same path to deal with
unexplained results from the IRQ registers.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02 00:09:26 +01:00
..
anubis-cpld.h [ARM] 2889/1: S3C2410 - Add machine Anubis 2005-09-07 11:49:23 +01:00
anubis-irq.h [ARM] 2889/1: S3C2410 - Add machine Anubis 2005-09-07 11:49:23 +01:00
anubis-map.h [ARM] 2934/1: Anubis - fix VA offsets for CPLD registers 2005-09-25 23:04:48 +01:00
audio.h [PATCH] ARM: 2762/1: S3C24XX Audio platform data 2005-06-28 21:01:03 +01:00
bast-cpld.h
bast-irq.h
bast-map.h
bast-pmu.h
debug-macro.S [ARM] 3266/1: S3C2400 - adds macro S3C24XX 2006-01-26 15:20:50 +00:00
dma.h [ARM] Remove definition of MAX_DMA_CHANNELS to zero 2006-01-04 15:51:51 +00:00
entry-macro.S [ARM] 3443/1: [S3C2410] Improve IRQ entry code 2006-04-02 00:09:26 +01:00
fb.h [ARM] 3045/2: S3C2410 - change init for lcd platform data 2005-10-28 15:31:45 +01:00
h1940-latch.h [ARM] 3326/1: H1940 - Control latches 2006-02-10 22:40:51 +00:00
hardware.h [ARM] 3284/1: S3C2400 - adds support to GPIO 2006-02-01 21:24:23 +00:00
idle.h
iic.h
io.h [ARM] 1/4: Move include of asm/hardware.h to asm-arm/arch-*/io.h 2005-10-28 10:20:25 +01:00
irqs.h
map.h [ARM] 3266/1: S3C2400 - adds macro S3C24XX 2006-01-26 15:20:50 +00:00
memory.h [ARM] 3060/1: allow constants found in asm/memory.h to be used in asm code 2005-10-29 21:44:55 +01:00
nand.h
osiris-cpld.h [ARM] 3327/1: S3C2410 - add osiris machine support 2006-03-21 22:06:00 +00:00
osiris-map.h [ARM] 3327/1: S3C2410 - add osiris machine support 2006-03-21 22:06:00 +00:00
otom-map.h
regs-adc.h
regs-clock.h [ARM] 3028/1: S3C2410 - add DCLK mask definitions 2005-10-20 23:21:20 +01:00
regs-dsc.h
regs-gpio.h [ARM] 3333/1: S3C2XX - add dclk and clkout clock support 2006-03-21 22:06:05 +00:00
regs-gpioj.h
regs-iic.h
regs-iis.h [ARM] 3077/1: S3C2410 - regs-iis.h missing mask for IISMOD_FS 2005-11-01 19:44:30 +00:00
regs-irq.h
regs-lcd.h [PATCH] s3c2410fb: ARM S3C2410 framebuffer driver 2005-09-09 14:03:42 -07:00
regs-mem.h [PATCH] ARM: 2640/1: Adds DRAM/BANKSIZE_MASK definitions for S3C2400 2005-04-25 18:36:50 +01:00
regs-nand.h [PATCH] ARM: 2676/1: S3C2440 - NAND register additions 2005-05-12 19:27:13 +01:00
regs-rtc.h
regs-sdi.h
regs-serial.h [ARM] 3266/1: S3C2400 - adds macro S3C24XX 2006-01-26 15:20:50 +00:00
regs-spi.h [PATCH] ARM: 2641/1: Adds S3C2400_SPPIN_nCS to arch-s3c2410/regs-spi.h 2005-04-25 18:40:31 +01:00
regs-timer.h
regs-udc.h
regs-watchdog.h
system.h
timex.h
uncompress.h [ARM] Fix decompressor serial IO to give CRLF not LFCR 2006-03-28 10:24:33 +01:00
usb-control.h [PATCH] ARM: 2849/1: S3C24XX - USB host update (2848/1) 2005-08-10 16:45:14 +01:00
vmalloc.h [PATCH] ARM: cleanup vmalloc start/offset macros 2005-05-03 12:20:29 +01:00
vr1000-cpld.h
vr1000-irq.h
vr1000-map.h