kevin/linux
1
Fork 0
Code
2653a47b89
linux/drivers/usb/serial/option.c
Alan Cox 606d099cdd [PATCH] tty: switch to ktermios 
This is the grungy swap all the occurrences in the right places patch that
goes with the updates.  At this point we have the same functionality as
before (except that sgttyb() returns speeds not zero) and are ready to
begin turning new stuff on providing nobody reports lots of bugs

If you are a tty driver author converting an out of tree driver the only
impact should be termios->ktermios name changes for the speed/property
setting functions from your upper layers.

If you are implementing your own TCGETS function before then your driver
was broken already and its about to get a whole lot more painful for you so
please fix it 8)

Also fill in c_ispeed/ospeed on init for most devices, although the current
code will do this for you anyway but I'd like eventually to lose that extra
paranoia

[akpm@osdl.org: bluetooth fix]
[mp3@de.ibm.com: sclp fix]
[mp3@de.ibm.com: warning fix for tty3270]
[hugh@veritas.com: fix tty_ioctl powerpc build]
[jdike@addtoit.com: uml: fix ->set_termios declaration]
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Martin Peschke <mp3@de.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:57 -08:00

729 lines
19 KiB
C
Raw Blame History

/*
USB Driver for GSM modems
Copyright (C) 2005 Matthias Urlichs <smurf@smurf.noris.de>
This driver is free software; you can redistribute it and/or modify
it under the terms of Version 2 of the GNU General Public License as
published by the Free Software Foundation.
Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org>
History: see the git log.
Work sponsored by: Sigos GmbH, Germany <info@sigos.de>
This driver exists because the "normal" serial driver doesn't work too well
with GSM modems. Issues:
- data loss -- one single Receive URB is not nearly enough
- nonstandard flow (Option devices) control
- controlling the baud rate doesn't make sense
This driver is named "option" because the most common device it's
used for is a PC-Card (with an internal OHCI-USB interface, behind
which the GSM interface sits), made by Option Inc.
Some of the "one port" devices actually exhibit multiple USB instances
on the USB bus. This is not a bug, these ports are used for different
device features.
*/
#define DRIVER_VERSION "v0.7.1"
#define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
#define DRIVER_DESC "USB Driver for GSM modems"
#include <linux/kernel.h>
#include <linux/jiffies.h>
#include <linux/errno.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
/* Function prototypes */
static int option_open(struct usb_serial_port *port, struct file *filp);
static void option_close(struct usb_serial_port *port, struct file *filp);
static int option_startup(struct usb_serial *serial);
static void option_shutdown(struct usb_serial *serial);
static void option_rx_throttle(struct usb_serial_port *port);
static void option_rx_unthrottle(struct usb_serial_port *port);
static int option_write_room(struct usb_serial_port *port);
static void option_instat_callback(struct urb *urb);
static int option_write(struct usb_serial_port *port,
const unsigned char *buf, int count);
static int option_chars_in_buffer(struct usb_serial_port *port);
static int option_ioctl(struct usb_serial_port *port, struct file *file,
unsigned int cmd, unsigned long arg);
static void option_set_termios(struct usb_serial_port *port,
struct ktermios *old);
static void option_break_ctl(struct usb_serial_port *port, int break_state);
static int option_tiocmget(struct usb_serial_port *port, struct file *file);
static int option_tiocmset(struct usb_serial_port *port, struct file *file,
unsigned int set, unsigned int clear);
static int option_send_setup(struct usb_serial_port *port);
/* Vendor and product IDs */
#define OPTION_VENDOR_ID 0x0AF0
#define HUAWEI_VENDOR_ID 0x12D1
#define AUDIOVOX_VENDOR_ID 0x0F3D
#define NOVATELWIRELESS_VENDOR_ID 0x1410
#define ANYDATA_VENDOR_ID 0x16d5
#define OPTION_PRODUCT_OLD 0x5000
#define OPTION_PRODUCT_FUSION 0x6000
#define OPTION_PRODUCT_FUSION2 0x6300
#define OPTION_PRODUCT_COBRA 0x6500
#define OPTION_PRODUCT_COBRA2 0x6600
#define HUAWEI_PRODUCT_E600 0x1001
#define AUDIOVOX_PRODUCT_AIRCARD 0x0112
#define NOVATELWIRELESS_PRODUCT_U740 0x1400
#define ANYDATA_PRODUCT_ID 0x6501
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) },
{ } /* Terminating entry */
};
static struct usb_device_id option_ids1[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
static struct usb_driver option_driver = {
.name = "option",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.id_table = option_ids,
.no_dynamic_id = 1,
};
/* The card has three separate interfaces, which the serial driver
* recognizes separately, thus num_port=1.
*/
static struct usb_serial_driver option_1port_device = {
.driver = {
.owner = THIS_MODULE,
.name = "option1",
},
.description = "GSM modem (1-port)",
.id_table = option_ids1,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
.num_ports = 1,
.open = option_open,
.close = option_close,
.write = option_write,
.write_room = option_write_room,
.chars_in_buffer = option_chars_in_buffer,
.throttle = option_rx_throttle,
.unthrottle = option_rx_unthrottle,
.ioctl = option_ioctl,
.set_termios = option_set_termios,
.break_ctl = option_break_ctl,
.tiocmget = option_tiocmget,
.tiocmset = option_tiocmset,
.attach = option_startup,
.shutdown = option_shutdown,
.read_int_callback = option_instat_callback,
};
#ifdef CONFIG_USB_DEBUG
static int debug;
#else
#define debug 0
#endif
/* per port private data */
#define N_IN_URB 4
#define N_OUT_URB 1
#define IN_BUFLEN 4096
#define OUT_BUFLEN 128
struct option_port_private {
/* Input endpoints and buffer for this port */
struct urb *in_urbs[N_IN_URB];
char in_buffer[N_IN_URB][IN_BUFLEN];
/* Output endpoints and buffer for this port */
struct urb *out_urbs[N_OUT_URB];
char out_buffer[N_OUT_URB][OUT_BUFLEN];
/* Settings for the port */
int rts_state; /* Handshaking pins (outputs) */
int dtr_state;
int cts_state; /* Handshaking pins (inputs) */
int dsr_state;
int dcd_state;
int ri_state;
unsigned long tx_start_time[N_OUT_URB];
};
/* Functions used by new usb-serial code. */
static int __init option_init(void)
{
int retval;
retval = usb_serial_register(&option_1port_device);
if (retval)
goto failed_1port_device_register;
retval = usb_register(&option_driver);
if (retval)
goto failed_driver_register;
info(DRIVER_DESC ": " DRIVER_VERSION);
return 0;
failed_driver_register:
usb_serial_deregister (&option_1port_device);
failed_1port_device_register:
return retval;
}
static void __exit option_exit(void)
{
usb_deregister (&option_driver);
usb_serial_deregister (&option_1port_device);
}
module_init(option_init);
module_exit(option_exit);
static void option_rx_throttle(struct usb_serial_port *port)
{
dbg("%s", __FUNCTION__);
}
static void option_rx_unthrottle(struct usb_serial_port *port)
{
dbg("%s", __FUNCTION__);
}
static void option_break_ctl(struct usb_serial_port *port, int break_state)
{
/* Unfortunately, I don't know how to send a break */
dbg("%s", __FUNCTION__);
}
static void option_set_termios(struct usb_serial_port *port,
struct ktermios *old_termios)
{
dbg("%s", __FUNCTION__);
option_send_setup(port);
}
static int option_tiocmget(struct usb_serial_port *port, struct file *file)
{
unsigned int value;
struct option_port_private *portdata;
portdata = usb_get_serial_port_data(port);
value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
((portdata->dtr_state) ? TIOCM_DTR : 0) |
((portdata->cts_state) ? TIOCM_CTS : 0) |
((portdata->dsr_state) ? TIOCM_DSR : 0) |
((portdata->dcd_state) ? TIOCM_CAR : 0) |
((portdata->ri_state) ? TIOCM_RNG : 0);
return value;
}
static int option_tiocmset(struct usb_serial_port *port, struct file *file,
unsigned int set, unsigned int clear)
{
struct option_port_private *portdata;
portdata = usb_get_serial_port_data(port);
if (set & TIOCM_RTS)
portdata->rts_state = 1;
if (set & TIOCM_DTR)
portdata->dtr_state = 1;
if (clear & TIOCM_RTS)
portdata->rts_state = 0;
if (clear & TIOCM_DTR)
portdata->dtr_state = 0;
return option_send_setup(port);
}
static int option_ioctl(struct usb_serial_port *port, struct file *file,
unsigned int cmd, unsigned long arg)
{
return -ENOIOCTLCMD;
}
/* Write */
static int option_write(struct usb_serial_port *port,
const unsigned char *buf, int count)
{
struct option_port_private *portdata;
int i;
int left, todo;
struct urb *this_urb = NULL; /* spurious */
int err;
portdata = usb_get_serial_port_data(port);
dbg("%s: write (%d chars)", __FUNCTION__, count);
i = 0;
left = count;
for (i=0; left > 0 && i < N_OUT_URB; i++) {
todo = left;
if (todo > OUT_BUFLEN)
todo = OUT_BUFLEN;
this_urb = portdata->out_urbs[i];
if (this_urb->status == -EINPROGRESS) {
if (time_before(jiffies,
portdata->tx_start_time[i] + 10 * HZ))
continue;
usb_unlink_urb(this_urb);
continue;
}
if (this_urb->status != 0)
dbg("usb_write %p failed (err=%d)",
this_urb, this_urb->status);
dbg("%s: endpoint %d buf %d", __FUNCTION__,
usb_pipeendpoint(this_urb->pipe), i);
/* send the data */
memcpy (this_urb->transfer_buffer, buf, todo);
this_urb->transfer_buffer_length = todo;
this_urb->dev = port->serial->dev;
err = usb_submit_urb(this_urb, GFP_ATOMIC);
if (err) {
dbg("usb_submit_urb %p (write bulk) failed "
"(%d, has %d)", this_urb,
err, this_urb->status);
continue;
}
portdata->tx_start_time[i] = jiffies;
buf += todo;
left -= todo;
}
count -= left;
dbg("%s: wrote (did %d)", __FUNCTION__, count);
return count;
}
static void option_indat_callback(struct urb *urb)
{
int err;
int endpoint;
struct usb_serial_port *port;
struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
dbg("%s: %p", __FUNCTION__, urb);
endpoint = usb_pipeendpoint(urb->pipe);
port = (struct usb_serial_port *) urb->context;
if (urb->status) {
dbg("%s: nonzero status: %d on endpoint %02x.",
__FUNCTION__, urb->status, endpoint);
} else {
tty = port->tty;
if (urb->actual_length) {
tty_buffer_request_room(tty, urb->actual_length);
tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
} else {
dbg("%s: empty read urb received", __FUNCTION__);
}
/* Resubmit urb so we continue receiving */
if (port->open_count && urb->status != -ESHUTDOWN) {
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err)
printk(KERN_ERR "%s: resubmit read urb failed. "
"(%d)", __FUNCTION__, err);
}
}
return;
}
static void option_outdat_callback(struct urb *urb)
{
struct usb_serial_port *port;
dbg("%s", __FUNCTION__);
port = (struct usb_serial_port *) urb->context;
usb_serial_port_softint(port);
}
static void option_instat_callback(struct urb *urb)
{
int err;
struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
struct option_port_private *portdata = usb_get_serial_port_data(port);
struct usb_serial *serial = port->serial;
dbg("%s", __FUNCTION__);
dbg("%s: urb %p port %p has data %p", __FUNCTION__,urb,port,portdata);
if (urb->status == 0) {
struct usb_ctrlrequest *req_pkt =
(struct usb_ctrlrequest *)urb->transfer_buffer;
if (!req_pkt) {
dbg("%s: NULL req_pkt\n", __FUNCTION__);
return;
}
if ((req_pkt->bRequestType == 0xA1) &&
(req_pkt->bRequest == 0x20)) {
int old_dcd_state;
unsigned char signals = *((unsigned char *)
urb->transfer_buffer +
sizeof(struct usb_ctrlrequest));
dbg("%s: signal x%x", __FUNCTION__, signals);
old_dcd_state = portdata->dcd_state;
portdata->cts_state = 1;
portdata->dcd_state = ((signals & 0x01) ? 1 : 0);
portdata->dsr_state = ((signals & 0x02) ? 1 : 0);
portdata->ri_state = ((signals & 0x08) ? 1 : 0);
if (port->tty && !C_CLOCAL(port->tty) &&
old_dcd_state && !portdata->dcd_state)
tty_hangup(port->tty);
} else {
dbg("%s: type %x req %x", __FUNCTION__,
req_pkt->bRequestType,req_pkt->bRequest);
}
} else
dbg("%s: error %d", __FUNCTION__, urb->status);
/* Resubmit urb so we continue receiving IRQ data */
if (urb->status != -ESHUTDOWN) {
urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err)
dbg("%s: resubmit intr urb failed. (%d)",
__FUNCTION__, err);
}
}
static int option_write_room(struct usb_serial_port *port)
{
struct option_port_private *portdata;
int i;
int data_len = 0;
struct urb *this_urb;
portdata = usb_get_serial_port_data(port);
for (i=0; i < N_OUT_URB; i++) {
this_urb = portdata->out_urbs[i];
if (this_urb && this_urb->status != -EINPROGRESS)
data_len += OUT_BUFLEN;
}
dbg("%s: %d", __FUNCTION__, data_len);
return data_len;
}
static int option_chars_in_buffer(struct usb_serial_port *port)
{
struct option_port_private *portdata;
int i;
int data_len = 0;
struct urb *this_urb;
portdata = usb_get_serial_port_data(port);
for (i=0; i < N_OUT_URB; i++) {
this_urb = portdata->out_urbs[i];
if (this_urb && this_urb->status == -EINPROGRESS)
data_len += this_urb->transfer_buffer_length;
}
dbg("%s: %d", __FUNCTION__, data_len);
return data_len;
}
static int option_open(struct usb_serial_port *port, struct file *filp)
{
struct option_port_private *portdata;
struct usb_serial *serial = port->serial;
int i, err;
struct urb *urb;
portdata = usb_get_serial_port_data(port);
dbg("%s", __FUNCTION__);
/* Set some sane defaults */
portdata->rts_state = 1;
portdata->dtr_state = 1;
/* Reset low level data toggle and start reading from endpoints */
for (i = 0; i < N_IN_URB; i++) {
urb = portdata->in_urbs[i];
if (! urb)
continue;
if (urb->dev != serial->dev) {
dbg("%s: dev %p != %p", __FUNCTION__,
urb->dev, serial->dev);
continue;
}
/*
* make sure endpoint data toggle is synchronized with the
* device
*/
usb_clear_halt(urb->dev, urb->pipe);
err = usb_submit_urb(urb, GFP_KERNEL);
if (err) {
dbg("%s: submit urb %d failed (%d) %d",
__FUNCTION__, i, err,
urb->transfer_buffer_length);
}
}
/* Reset low level data toggle on out endpoints */
for (i = 0; i < N_OUT_URB; i++) {
urb = portdata->out_urbs[i];
if (! urb)
continue;
urb->dev = serial->dev;
/* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
usb_pipeout(urb->pipe), 0); */
}
port->tty->low_latency = 1;
option_send_setup(port);
return (0);
}
static inline void stop_urb(struct urb *urb)
{
if (urb && urb->status == -EINPROGRESS)
usb_kill_urb(urb);
}
static void option_close(struct usb_serial_port *port, struct file *filp)
{
int i;
struct usb_serial *serial = port->serial;
struct option_port_private *portdata;
dbg("%s", __FUNCTION__);
portdata = usb_get_serial_port_data(port);
portdata->rts_state = 0;
portdata->dtr_state = 0;
if (serial->dev) {
option_send_setup(port);
/* Stop reading/writing urbs */
for (i = 0; i < N_IN_URB; i++)
stop_urb(portdata->in_urbs[i]);
for (i = 0; i < N_OUT_URB; i++)
stop_urb(portdata->out_urbs[i]);
}
port->tty = NULL;
}
/* Helper functions used by option_setup_urbs */
static struct urb *option_setup_urb(struct usb_serial *serial, int endpoint,
int dir, void *ctx, char *buf, int len,
void (*callback)(struct urb *))
{
struct urb *urb;
if (endpoint == -1)
return NULL; /* endpoint not needed */
urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */
if (urb == NULL) {
dbg("%s: alloc for endpoint %d failed.", __FUNCTION__, endpoint);
return NULL;
}
/* Fill URB using supplied data. */
usb_fill_bulk_urb(urb, serial->dev,
usb_sndbulkpipe(serial->dev, endpoint) | dir,
buf, len, callback, ctx);
return urb;
}
/* Setup urbs */
static void option_setup_urbs(struct usb_serial *serial)
{
int i,j;
struct usb_serial_port *port;
struct option_port_private *portdata;
dbg("%s", __FUNCTION__);
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
portdata = usb_get_serial_port_data(port);
/* Do indat endpoints first */
for (j = 0; j < N_IN_URB; ++j) {
portdata->in_urbs[j] = option_setup_urb (serial,
port->bulk_in_endpointAddress, USB_DIR_IN, port,
portdata->in_buffer[j], IN_BUFLEN, option_indat_callback);
}
/* outdat endpoints */
for (j = 0; j < N_OUT_URB; ++j) {
portdata->out_urbs[j] = option_setup_urb (serial,
port->bulk_out_endpointAddress, USB_DIR_OUT, port,
portdata->out_buffer[j], OUT_BUFLEN, option_outdat_callback);
}
}
}
static int option_send_setup(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
struct option_port_private *portdata;
dbg("%s", __FUNCTION__);
portdata = usb_get_serial_port_data(port);
if (port->tty) {
int val = 0;
if (portdata->dtr_state)
val |= 0x01;
if (portdata->rts_state)
val |= 0x02;
return usb_control_msg(serial->dev,
usb_rcvctrlpipe(serial->dev, 0),
0x22,0x21,val,0,NULL,0,USB_CTRL_SET_TIMEOUT);
}
return 0;
}
static int option_startup(struct usb_serial *serial)
{
int i, err;
struct usb_serial_port *port;
struct option_port_private *portdata;
dbg("%s", __FUNCTION__);
/* Now setup per port private data */
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
if (!portdata) {
dbg("%s: kmalloc for option_port_private (%d) failed!.",
__FUNCTION__, i);
return (1);
}
usb_set_serial_port_data(port, portdata);
if (! port->interrupt_in_urb)
continue;
err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (err)
dbg("%s: submit irq_in urb failed %d",
__FUNCTION__, err);
}
option_setup_urbs(serial);
return (0);
}
static void option_shutdown(struct usb_serial *serial)
{
int i, j;
struct usb_serial_port *port;
struct option_port_private *portdata;
dbg("%s", __FUNCTION__);
/* Stop reading/writing urbs */
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
portdata = usb_get_serial_port_data(port);
for (j = 0; j < N_IN_URB; j++)
stop_urb(portdata->in_urbs[j]);
for (j = 0; j < N_OUT_URB; j++)
stop_urb(portdata->out_urbs[j]);
}
/* Now free them */
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
portdata = usb_get_serial_port_data(port);
for (j = 0; j < N_IN_URB; j++) {
if (portdata->in_urbs[j]) {
usb_free_urb(portdata->in_urbs[j]);
portdata->in_urbs[j] = NULL;
}
}
for (j = 0; j < N_OUT_URB; j++) {
if (portdata->out_urbs[j]) {
usb_free_urb(portdata->out_urbs[j]);
portdata->out_urbs[j] = NULL;
}
}
}
/* Now free per port private data */
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
kfree(usb_get_serial_port_data(port));
}
}
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");
#ifdef CONFIG_USB_DEBUG
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug messages");
#endif
View Git Blame Copy Permalink