984b203a72
Use resource_size(). Signed-off-by: Chris Ball <cjb@laptop.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2470 lines
60 KiB
C
2470 lines
60 KiB
C
/*
|
|
* drivers/mmc/host/omap_hsmmc.c
|
|
*
|
|
* Driver for OMAP2430/3430 MMC controller.
|
|
*
|
|
* Copyright (C) 2007 Texas Instruments.
|
|
*
|
|
* Authors:
|
|
* Syed Mohammed Khasim <x0khasim@ti.com>
|
|
* Madhusudhan <madhu.cr@ti.com>
|
|
* Mohit Jalori <mjalori@ti.com>
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
* kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/core.h>
|
|
#include <linux/mmc/mmc.h>
|
|
#include <linux/io.h>
|
|
#include <linux/semaphore.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <plat/dma.h>
|
|
#include <mach/hardware.h>
|
|
#include <plat/board.h>
|
|
#include <plat/mmc.h>
|
|
#include <plat/cpu.h>
|
|
|
|
/* OMAP HSMMC Host Controller Registers */
|
|
#define OMAP_HSMMC_SYSCONFIG 0x0010
|
|
#define OMAP_HSMMC_SYSSTATUS 0x0014
|
|
#define OMAP_HSMMC_CON 0x002C
|
|
#define OMAP_HSMMC_BLK 0x0104
|
|
#define OMAP_HSMMC_ARG 0x0108
|
|
#define OMAP_HSMMC_CMD 0x010C
|
|
#define OMAP_HSMMC_RSP10 0x0110
|
|
#define OMAP_HSMMC_RSP32 0x0114
|
|
#define OMAP_HSMMC_RSP54 0x0118
|
|
#define OMAP_HSMMC_RSP76 0x011C
|
|
#define OMAP_HSMMC_DATA 0x0120
|
|
#define OMAP_HSMMC_HCTL 0x0128
|
|
#define OMAP_HSMMC_SYSCTL 0x012C
|
|
#define OMAP_HSMMC_STAT 0x0130
|
|
#define OMAP_HSMMC_IE 0x0134
|
|
#define OMAP_HSMMC_ISE 0x0138
|
|
#define OMAP_HSMMC_CAPA 0x0140
|
|
|
|
#define VS18 (1 << 26)
|
|
#define VS30 (1 << 25)
|
|
#define SDVS18 (0x5 << 9)
|
|
#define SDVS30 (0x6 << 9)
|
|
#define SDVS33 (0x7 << 9)
|
|
#define SDVS_MASK 0x00000E00
|
|
#define SDVSCLR 0xFFFFF1FF
|
|
#define SDVSDET 0x00000400
|
|
#define AUTOIDLE 0x1
|
|
#define SDBP (1 << 8)
|
|
#define DTO 0xe
|
|
#define ICE 0x1
|
|
#define ICS 0x2
|
|
#define CEN (1 << 2)
|
|
#define CLKD_MASK 0x0000FFC0
|
|
#define CLKD_SHIFT 6
|
|
#define DTO_MASK 0x000F0000
|
|
#define DTO_SHIFT 16
|
|
#define INT_EN_MASK 0x307F0033
|
|
#define BWR_ENABLE (1 << 4)
|
|
#define BRR_ENABLE (1 << 5)
|
|
#define DTO_ENABLE (1 << 20)
|
|
#define INIT_STREAM (1 << 1)
|
|
#define DP_SELECT (1 << 21)
|
|
#define DDIR (1 << 4)
|
|
#define DMA_EN 0x1
|
|
#define MSBS (1 << 5)
|
|
#define BCE (1 << 1)
|
|
#define FOUR_BIT (1 << 1)
|
|
#define DW8 (1 << 5)
|
|
#define CC 0x1
|
|
#define TC 0x02
|
|
#define OD 0x1
|
|
#define ERR (1 << 15)
|
|
#define CMD_TIMEOUT (1 << 16)
|
|
#define DATA_TIMEOUT (1 << 20)
|
|
#define CMD_CRC (1 << 17)
|
|
#define DATA_CRC (1 << 21)
|
|
#define CARD_ERR (1 << 28)
|
|
#define STAT_CLEAR 0xFFFFFFFF
|
|
#define INIT_STREAM_CMD 0x00000000
|
|
#define DUAL_VOLT_OCR_BIT 7
|
|
#define SRC (1 << 25)
|
|
#define SRD (1 << 26)
|
|
#define SOFTRESET (1 << 1)
|
|
#define RESETDONE (1 << 0)
|
|
|
|
/*
|
|
* FIXME: Most likely all the data using these _DEVID defines should come
|
|
* from the platform_data, or implemented in controller and slot specific
|
|
* functions.
|
|
*/
|
|
#define OMAP_MMC1_DEVID 0
|
|
#define OMAP_MMC2_DEVID 1
|
|
#define OMAP_MMC3_DEVID 2
|
|
#define OMAP_MMC4_DEVID 3
|
|
#define OMAP_MMC5_DEVID 4
|
|
|
|
#define MMC_TIMEOUT_MS 20
|
|
#define OMAP_MMC_MASTER_CLOCK 96000000
|
|
#define DRIVER_NAME "omap_hsmmc"
|
|
|
|
/* Timeouts for entering power saving states on inactivity, msec */
|
|
#define OMAP_MMC_DISABLED_TIMEOUT 100
|
|
#define OMAP_MMC_SLEEP_TIMEOUT 1000
|
|
#define OMAP_MMC_OFF_TIMEOUT 8000
|
|
|
|
/*
|
|
* One controller can have multiple slots, like on some omap boards using
|
|
* omap.c controller driver. Luckily this is not currently done on any known
|
|
* omap_hsmmc.c device.
|
|
*/
|
|
#define mmc_slot(host) (host->pdata->slots[host->slot_id])
|
|
|
|
/*
|
|
* MMC Host controller read/write API's
|
|
*/
|
|
#define OMAP_HSMMC_READ(base, reg) \
|
|
__raw_readl((base) + OMAP_HSMMC_##reg)
|
|
|
|
#define OMAP_HSMMC_WRITE(base, reg, val) \
|
|
__raw_writel((val), (base) + OMAP_HSMMC_##reg)
|
|
|
|
struct omap_hsmmc_host {
|
|
struct device *dev;
|
|
struct mmc_host *mmc;
|
|
struct mmc_request *mrq;
|
|
struct mmc_command *cmd;
|
|
struct mmc_data *data;
|
|
struct clk *fclk;
|
|
struct clk *iclk;
|
|
struct clk *dbclk;
|
|
/*
|
|
* vcc == configured supply
|
|
* vcc_aux == optional
|
|
* - MMC1, supply for DAT4..DAT7
|
|
* - MMC2/MMC2, external level shifter voltage supply, for
|
|
* chip (SDIO, eMMC, etc) or transceiver (MMC2 only)
|
|
*/
|
|
struct regulator *vcc;
|
|
struct regulator *vcc_aux;
|
|
struct work_struct mmc_carddetect_work;
|
|
void __iomem *base;
|
|
resource_size_t mapbase;
|
|
spinlock_t irq_lock; /* Prevent races with irq handler */
|
|
unsigned int id;
|
|
unsigned int dma_len;
|
|
unsigned int dma_sg_idx;
|
|
unsigned char bus_mode;
|
|
unsigned char power_mode;
|
|
u32 *buffer;
|
|
u32 bytesleft;
|
|
int suspended;
|
|
int irq;
|
|
int use_dma, dma_ch;
|
|
int dma_line_tx, dma_line_rx;
|
|
int slot_id;
|
|
int got_dbclk;
|
|
int response_busy;
|
|
int context_loss;
|
|
int dpm_state;
|
|
int vdd;
|
|
int protect_card;
|
|
int reqs_blocked;
|
|
int use_reg;
|
|
int req_in_progress;
|
|
|
|
struct omap_mmc_platform_data *pdata;
|
|
};
|
|
|
|
static int omap_hsmmc_card_detect(struct device *dev, int slot)
|
|
{
|
|
struct omap_mmc_platform_data *mmc = dev->platform_data;
|
|
|
|
/* NOTE: assumes card detect signal is active-low */
|
|
return !gpio_get_value_cansleep(mmc->slots[0].switch_pin);
|
|
}
|
|
|
|
static int omap_hsmmc_get_wp(struct device *dev, int slot)
|
|
{
|
|
struct omap_mmc_platform_data *mmc = dev->platform_data;
|
|
|
|
/* NOTE: assumes write protect signal is active-high */
|
|
return gpio_get_value_cansleep(mmc->slots[0].gpio_wp);
|
|
}
|
|
|
|
static int omap_hsmmc_get_cover_state(struct device *dev, int slot)
|
|
{
|
|
struct omap_mmc_platform_data *mmc = dev->platform_data;
|
|
|
|
/* NOTE: assumes card detect signal is active-low */
|
|
return !gpio_get_value_cansleep(mmc->slots[0].switch_pin);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int omap_hsmmc_suspend_cdirq(struct device *dev, int slot)
|
|
{
|
|
struct omap_mmc_platform_data *mmc = dev->platform_data;
|
|
|
|
disable_irq(mmc->slots[0].card_detect_irq);
|
|
return 0;
|
|
}
|
|
|
|
static int omap_hsmmc_resume_cdirq(struct device *dev, int slot)
|
|
{
|
|
struct omap_mmc_platform_data *mmc = dev->platform_data;
|
|
|
|
enable_irq(mmc->slots[0].card_detect_irq);
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
|
|
#define omap_hsmmc_suspend_cdirq NULL
|
|
#define omap_hsmmc_resume_cdirq NULL
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_REGULATOR
|
|
|
|
static int omap_hsmmc_1_set_power(struct device *dev, int slot, int power_on,
|
|
int vdd)
|
|
{
|
|
struct omap_hsmmc_host *host =
|
|
platform_get_drvdata(to_platform_device(dev));
|
|
int ret;
|
|
|
|
if (mmc_slot(host).before_set_reg)
|
|
mmc_slot(host).before_set_reg(dev, slot, power_on, vdd);
|
|
|
|
if (power_on)
|
|
ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd);
|
|
else
|
|
ret = mmc_regulator_set_ocr(host->mmc, host->vcc, 0);
|
|
|
|
if (mmc_slot(host).after_set_reg)
|
|
mmc_slot(host).after_set_reg(dev, slot, power_on, vdd);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int omap_hsmmc_235_set_power(struct device *dev, int slot, int power_on,
|
|
int vdd)
|
|
{
|
|
struct omap_hsmmc_host *host =
|
|
platform_get_drvdata(to_platform_device(dev));
|
|
int ret = 0;
|
|
|
|
/*
|
|
* If we don't see a Vcc regulator, assume it's a fixed
|
|
* voltage always-on regulator.
|
|
*/
|
|
if (!host->vcc)
|
|
return 0;
|
|
|
|
if (mmc_slot(host).before_set_reg)
|
|
mmc_slot(host).before_set_reg(dev, slot, power_on, vdd);
|
|
|
|
/*
|
|
* Assume Vcc regulator is used only to power the card ... OMAP
|
|
* VDDS is used to power the pins, optionally with a transceiver to
|
|
* support cards using voltages other than VDDS (1.8V nominal). When a
|
|
* transceiver is used, DAT3..7 are muxed as transceiver control pins.
|
|
*
|
|
* In some cases this regulator won't support enable/disable;
|
|
* e.g. it's a fixed rail for a WLAN chip.
|
|
*
|
|
* In other cases vcc_aux switches interface power. Example, for
|
|
* eMMC cards it represents VccQ. Sometimes transceivers or SDIO
|
|
* chips/cards need an interface voltage rail too.
|
|
*/
|
|
if (power_on) {
|
|
ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd);
|
|
/* Enable interface voltage rail, if needed */
|
|
if (ret == 0 && host->vcc_aux) {
|
|
ret = regulator_enable(host->vcc_aux);
|
|
if (ret < 0)
|
|
ret = mmc_regulator_set_ocr(host->mmc,
|
|
host->vcc, 0);
|
|
}
|
|
} else {
|
|
/* Shut down the rail */
|
|
if (host->vcc_aux)
|
|
ret = regulator_disable(host->vcc_aux);
|
|
if (!ret) {
|
|
/* Then proceed to shut down the local regulator */
|
|
ret = mmc_regulator_set_ocr(host->mmc,
|
|
host->vcc, 0);
|
|
}
|
|
}
|
|
|
|
if (mmc_slot(host).after_set_reg)
|
|
mmc_slot(host).after_set_reg(dev, slot, power_on, vdd);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int omap_hsmmc_4_set_power(struct device *dev, int slot, int power_on,
|
|
int vdd)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int omap_hsmmc_1_set_sleep(struct device *dev, int slot, int sleep,
|
|
int vdd, int cardsleep)
|
|
{
|
|
struct omap_hsmmc_host *host =
|
|
platform_get_drvdata(to_platform_device(dev));
|
|
int mode = sleep ? REGULATOR_MODE_STANDBY : REGULATOR_MODE_NORMAL;
|
|
|
|
return regulator_set_mode(host->vcc, mode);
|
|
}
|
|
|
|
static int omap_hsmmc_235_set_sleep(struct device *dev, int slot, int sleep,
|
|
int vdd, int cardsleep)
|
|
{
|
|
struct omap_hsmmc_host *host =
|
|
platform_get_drvdata(to_platform_device(dev));
|
|
int err, mode;
|
|
|
|
/*
|
|
* If we don't see a Vcc regulator, assume it's a fixed
|
|
* voltage always-on regulator.
|
|
*/
|
|
if (!host->vcc)
|
|
return 0;
|
|
|
|
mode = sleep ? REGULATOR_MODE_STANDBY : REGULATOR_MODE_NORMAL;
|
|
|
|
if (!host->vcc_aux)
|
|
return regulator_set_mode(host->vcc, mode);
|
|
|
|
if (cardsleep) {
|
|
/* VCC can be turned off if card is asleep */
|
|
if (sleep)
|
|
err = mmc_regulator_set_ocr(host->mmc, host->vcc, 0);
|
|
else
|
|
err = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd);
|
|
} else
|
|
err = regulator_set_mode(host->vcc, mode);
|
|
if (err)
|
|
return err;
|
|
|
|
if (!mmc_slot(host).vcc_aux_disable_is_sleep)
|
|
return regulator_set_mode(host->vcc_aux, mode);
|
|
|
|
if (sleep)
|
|
return regulator_disable(host->vcc_aux);
|
|
else
|
|
return regulator_enable(host->vcc_aux);
|
|
}
|
|
|
|
static int omap_hsmmc_4_set_sleep(struct device *dev, int slot, int sleep,
|
|
int vdd, int cardsleep)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
|
|
{
|
|
struct regulator *reg;
|
|
int ret = 0;
|
|
int ocr_value = 0;
|
|
|
|
switch (host->id) {
|
|
case OMAP_MMC1_DEVID:
|
|
/* On-chip level shifting via PBIAS0/PBIAS1 */
|
|
mmc_slot(host).set_power = omap_hsmmc_1_set_power;
|
|
mmc_slot(host).set_sleep = omap_hsmmc_1_set_sleep;
|
|
break;
|
|
case OMAP_MMC2_DEVID:
|
|
case OMAP_MMC3_DEVID:
|
|
case OMAP_MMC5_DEVID:
|
|
/* Off-chip level shifting, or none */
|
|
mmc_slot(host).set_power = omap_hsmmc_235_set_power;
|
|
mmc_slot(host).set_sleep = omap_hsmmc_235_set_sleep;
|
|
break;
|
|
case OMAP_MMC4_DEVID:
|
|
mmc_slot(host).set_power = omap_hsmmc_4_set_power;
|
|
mmc_slot(host).set_sleep = omap_hsmmc_4_set_sleep;
|
|
default:
|
|
pr_err("MMC%d configuration not supported!\n", host->id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
reg = regulator_get(host->dev, "vmmc");
|
|
if (IS_ERR(reg)) {
|
|
dev_dbg(host->dev, "vmmc regulator missing\n");
|
|
/*
|
|
* HACK: until fixed.c regulator is usable,
|
|
* we don't require a main regulator
|
|
* for MMC2 or MMC3
|
|
*/
|
|
if (host->id == OMAP_MMC1_DEVID) {
|
|
ret = PTR_ERR(reg);
|
|
goto err;
|
|
}
|
|
} else {
|
|
host->vcc = reg;
|
|
ocr_value = mmc_regulator_get_ocrmask(reg);
|
|
if (!mmc_slot(host).ocr_mask) {
|
|
mmc_slot(host).ocr_mask = ocr_value;
|
|
} else {
|
|
if (!(mmc_slot(host).ocr_mask & ocr_value)) {
|
|
pr_err("MMC%d ocrmask %x is not supported\n",
|
|
host->id, mmc_slot(host).ocr_mask);
|
|
mmc_slot(host).ocr_mask = 0;
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
mmc_slot(host).ocr_mask = mmc_regulator_get_ocrmask(reg);
|
|
|
|
/* Allow an aux regulator */
|
|
reg = regulator_get(host->dev, "vmmc_aux");
|
|
host->vcc_aux = IS_ERR(reg) ? NULL : reg;
|
|
|
|
/*
|
|
* UGLY HACK: workaround regulator framework bugs.
|
|
* When the bootloader leaves a supply active, it's
|
|
* initialized with zero usecount ... and we can't
|
|
* disable it without first enabling it. Until the
|
|
* framework is fixed, we need a workaround like this
|
|
* (which is safe for MMC, but not in general).
|
|
*/
|
|
if (regulator_is_enabled(host->vcc) > 0) {
|
|
regulator_enable(host->vcc);
|
|
regulator_disable(host->vcc);
|
|
}
|
|
if (host->vcc_aux) {
|
|
if (regulator_is_enabled(reg) > 0) {
|
|
regulator_enable(reg);
|
|
regulator_disable(reg);
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
mmc_slot(host).set_power = NULL;
|
|
mmc_slot(host).set_sleep = NULL;
|
|
return ret;
|
|
}
|
|
|
|
static void omap_hsmmc_reg_put(struct omap_hsmmc_host *host)
|
|
{
|
|
regulator_put(host->vcc);
|
|
regulator_put(host->vcc_aux);
|
|
mmc_slot(host).set_power = NULL;
|
|
mmc_slot(host).set_sleep = NULL;
|
|
}
|
|
|
|
static inline int omap_hsmmc_have_reg(void)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
#else
|
|
|
|
static inline int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
|
|
{
|
|
return -EINVAL;
|
|
}
|
|
|
|
static inline void omap_hsmmc_reg_put(struct omap_hsmmc_host *host)
|
|
{
|
|
}
|
|
|
|
static inline int omap_hsmmc_have_reg(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
#endif
|
|
|
|
static int omap_hsmmc_gpio_init(struct omap_mmc_platform_data *pdata)
|
|
{
|
|
int ret;
|
|
|
|
if (gpio_is_valid(pdata->slots[0].switch_pin)) {
|
|
if (pdata->slots[0].cover)
|
|
pdata->slots[0].get_cover_state =
|
|
omap_hsmmc_get_cover_state;
|
|
else
|
|
pdata->slots[0].card_detect = omap_hsmmc_card_detect;
|
|
pdata->slots[0].card_detect_irq =
|
|
gpio_to_irq(pdata->slots[0].switch_pin);
|
|
ret = gpio_request(pdata->slots[0].switch_pin, "mmc_cd");
|
|
if (ret)
|
|
return ret;
|
|
ret = gpio_direction_input(pdata->slots[0].switch_pin);
|
|
if (ret)
|
|
goto err_free_sp;
|
|
} else
|
|
pdata->slots[0].switch_pin = -EINVAL;
|
|
|
|
if (gpio_is_valid(pdata->slots[0].gpio_wp)) {
|
|
pdata->slots[0].get_ro = omap_hsmmc_get_wp;
|
|
ret = gpio_request(pdata->slots[0].gpio_wp, "mmc_wp");
|
|
if (ret)
|
|
goto err_free_cd;
|
|
ret = gpio_direction_input(pdata->slots[0].gpio_wp);
|
|
if (ret)
|
|
goto err_free_wp;
|
|
} else
|
|
pdata->slots[0].gpio_wp = -EINVAL;
|
|
|
|
return 0;
|
|
|
|
err_free_wp:
|
|
gpio_free(pdata->slots[0].gpio_wp);
|
|
err_free_cd:
|
|
if (gpio_is_valid(pdata->slots[0].switch_pin))
|
|
err_free_sp:
|
|
gpio_free(pdata->slots[0].switch_pin);
|
|
return ret;
|
|
}
|
|
|
|
static void omap_hsmmc_gpio_free(struct omap_mmc_platform_data *pdata)
|
|
{
|
|
if (gpio_is_valid(pdata->slots[0].gpio_wp))
|
|
gpio_free(pdata->slots[0].gpio_wp);
|
|
if (gpio_is_valid(pdata->slots[0].switch_pin))
|
|
gpio_free(pdata->slots[0].switch_pin);
|
|
}
|
|
|
|
/*
|
|
* Stop clock to the card
|
|
*/
|
|
static void omap_hsmmc_stop_clock(struct omap_hsmmc_host *host)
|
|
{
|
|
OMAP_HSMMC_WRITE(host->base, SYSCTL,
|
|
OMAP_HSMMC_READ(host->base, SYSCTL) & ~CEN);
|
|
if ((OMAP_HSMMC_READ(host->base, SYSCTL) & CEN) != 0x0)
|
|
dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stoped\n");
|
|
}
|
|
|
|
static void omap_hsmmc_enable_irq(struct omap_hsmmc_host *host,
|
|
struct mmc_command *cmd)
|
|
{
|
|
unsigned int irq_mask;
|
|
|
|
if (host->use_dma)
|
|
irq_mask = INT_EN_MASK & ~(BRR_ENABLE | BWR_ENABLE);
|
|
else
|
|
irq_mask = INT_EN_MASK;
|
|
|
|
/* Disable timeout for erases */
|
|
if (cmd->opcode == MMC_ERASE)
|
|
irq_mask &= ~DTO_ENABLE;
|
|
|
|
OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
|
|
OMAP_HSMMC_WRITE(host->base, ISE, irq_mask);
|
|
OMAP_HSMMC_WRITE(host->base, IE, irq_mask);
|
|
}
|
|
|
|
static void omap_hsmmc_disable_irq(struct omap_hsmmc_host *host)
|
|
{
|
|
OMAP_HSMMC_WRITE(host->base, ISE, 0);
|
|
OMAP_HSMMC_WRITE(host->base, IE, 0);
|
|
OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
/*
|
|
* Restore the MMC host context, if it was lost as result of a
|
|
* power state change.
|
|
*/
|
|
static int omap_hsmmc_context_restore(struct omap_hsmmc_host *host)
|
|
{
|
|
struct mmc_ios *ios = &host->mmc->ios;
|
|
struct omap_mmc_platform_data *pdata = host->pdata;
|
|
int context_loss = 0;
|
|
u32 hctl, capa, con;
|
|
u16 dsor = 0;
|
|
unsigned long timeout;
|
|
|
|
if (pdata->get_context_loss_count) {
|
|
context_loss = pdata->get_context_loss_count(host->dev);
|
|
if (context_loss < 0)
|
|
return 1;
|
|
}
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "context was %slost\n",
|
|
context_loss == host->context_loss ? "not " : "");
|
|
if (host->context_loss == context_loss)
|
|
return 1;
|
|
|
|
/* Wait for hardware reset */
|
|
timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
|
|
while ((OMAP_HSMMC_READ(host->base, SYSSTATUS) & RESETDONE) != RESETDONE
|
|
&& time_before(jiffies, timeout))
|
|
;
|
|
|
|
/* Do software reset */
|
|
OMAP_HSMMC_WRITE(host->base, SYSCONFIG, SOFTRESET);
|
|
timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
|
|
while ((OMAP_HSMMC_READ(host->base, SYSSTATUS) & RESETDONE) != RESETDONE
|
|
&& time_before(jiffies, timeout))
|
|
;
|
|
|
|
OMAP_HSMMC_WRITE(host->base, SYSCONFIG,
|
|
OMAP_HSMMC_READ(host->base, SYSCONFIG) | AUTOIDLE);
|
|
|
|
if (host->id == OMAP_MMC1_DEVID) {
|
|
if (host->power_mode != MMC_POWER_OFF &&
|
|
(1 << ios->vdd) <= MMC_VDD_23_24)
|
|
hctl = SDVS18;
|
|
else
|
|
hctl = SDVS30;
|
|
capa = VS30 | VS18;
|
|
} else {
|
|
hctl = SDVS18;
|
|
capa = VS18;
|
|
}
|
|
|
|
OMAP_HSMMC_WRITE(host->base, HCTL,
|
|
OMAP_HSMMC_READ(host->base, HCTL) | hctl);
|
|
|
|
OMAP_HSMMC_WRITE(host->base, CAPA,
|
|
OMAP_HSMMC_READ(host->base, CAPA) | capa);
|
|
|
|
OMAP_HSMMC_WRITE(host->base, HCTL,
|
|
OMAP_HSMMC_READ(host->base, HCTL) | SDBP);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
|
|
while ((OMAP_HSMMC_READ(host->base, HCTL) & SDBP) != SDBP
|
|
&& time_before(jiffies, timeout))
|
|
;
|
|
|
|
omap_hsmmc_disable_irq(host);
|
|
|
|
/* Do not initialize card-specific things if the power is off */
|
|
if (host->power_mode == MMC_POWER_OFF)
|
|
goto out;
|
|
|
|
con = OMAP_HSMMC_READ(host->base, CON);
|
|
switch (ios->bus_width) {
|
|
case MMC_BUS_WIDTH_8:
|
|
OMAP_HSMMC_WRITE(host->base, CON, con | DW8);
|
|
break;
|
|
case MMC_BUS_WIDTH_4:
|
|
OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8);
|
|
OMAP_HSMMC_WRITE(host->base, HCTL,
|
|
OMAP_HSMMC_READ(host->base, HCTL) | FOUR_BIT);
|
|
break;
|
|
case MMC_BUS_WIDTH_1:
|
|
OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8);
|
|
OMAP_HSMMC_WRITE(host->base, HCTL,
|
|
OMAP_HSMMC_READ(host->base, HCTL) & ~FOUR_BIT);
|
|
break;
|
|
}
|
|
|
|
if (ios->clock) {
|
|
dsor = OMAP_MMC_MASTER_CLOCK / ios->clock;
|
|
if (dsor < 1)
|
|
dsor = 1;
|
|
|
|
if (OMAP_MMC_MASTER_CLOCK / dsor > ios->clock)
|
|
dsor++;
|
|
|
|
if (dsor > 250)
|
|
dsor = 250;
|
|
}
|
|
|
|
OMAP_HSMMC_WRITE(host->base, SYSCTL,
|
|
OMAP_HSMMC_READ(host->base, SYSCTL) & ~CEN);
|
|
OMAP_HSMMC_WRITE(host->base, SYSCTL, (dsor << 6) | (DTO << 16));
|
|
OMAP_HSMMC_WRITE(host->base, SYSCTL,
|
|
OMAP_HSMMC_READ(host->base, SYSCTL) | ICE);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
|
|
while ((OMAP_HSMMC_READ(host->base, SYSCTL) & ICS) != ICS
|
|
&& time_before(jiffies, timeout))
|
|
;
|
|
|
|
OMAP_HSMMC_WRITE(host->base, SYSCTL,
|
|
OMAP_HSMMC_READ(host->base, SYSCTL) | CEN);
|
|
|
|
con = OMAP_HSMMC_READ(host->base, CON);
|
|
if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
|
|
OMAP_HSMMC_WRITE(host->base, CON, con | OD);
|
|
else
|
|
OMAP_HSMMC_WRITE(host->base, CON, con & ~OD);
|
|
out:
|
|
host->context_loss = context_loss;
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "context is restored\n");
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Save the MMC host context (store the number of power state changes so far).
|
|
*/
|
|
static void omap_hsmmc_context_save(struct omap_hsmmc_host *host)
|
|
{
|
|
struct omap_mmc_platform_data *pdata = host->pdata;
|
|
int context_loss;
|
|
|
|
if (pdata->get_context_loss_count) {
|
|
context_loss = pdata->get_context_loss_count(host->dev);
|
|
if (context_loss < 0)
|
|
return;
|
|
host->context_loss = context_loss;
|
|
}
|
|
}
|
|
|
|
#else
|
|
|
|
static int omap_hsmmc_context_restore(struct omap_hsmmc_host *host)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void omap_hsmmc_context_save(struct omap_hsmmc_host *host)
|
|
{
|
|
}
|
|
|
|
#endif
|
|
|
|
/*
|
|
* Send init stream sequence to card
|
|
* before sending IDLE command
|
|
*/
|
|
static void send_init_stream(struct omap_hsmmc_host *host)
|
|
{
|
|
int reg = 0;
|
|
unsigned long timeout;
|
|
|
|
if (host->protect_card)
|
|
return;
|
|
|
|
disable_irq(host->irq);
|
|
|
|
OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK);
|
|
OMAP_HSMMC_WRITE(host->base, CON,
|
|
OMAP_HSMMC_READ(host->base, CON) | INIT_STREAM);
|
|
OMAP_HSMMC_WRITE(host->base, CMD, INIT_STREAM_CMD);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
|
|
while ((reg != CC) && time_before(jiffies, timeout))
|
|
reg = OMAP_HSMMC_READ(host->base, STAT) & CC;
|
|
|
|
OMAP_HSMMC_WRITE(host->base, CON,
|
|
OMAP_HSMMC_READ(host->base, CON) & ~INIT_STREAM);
|
|
|
|
OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
|
|
OMAP_HSMMC_READ(host->base, STAT);
|
|
|
|
enable_irq(host->irq);
|
|
}
|
|
|
|
static inline
|
|
int omap_hsmmc_cover_is_closed(struct omap_hsmmc_host *host)
|
|
{
|
|
int r = 1;
|
|
|
|
if (mmc_slot(host).get_cover_state)
|
|
r = mmc_slot(host).get_cover_state(host->dev, host->slot_id);
|
|
return r;
|
|
}
|
|
|
|
static ssize_t
|
|
omap_hsmmc_show_cover_switch(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev);
|
|
struct omap_hsmmc_host *host = mmc_priv(mmc);
|
|
|
|
return sprintf(buf, "%s\n",
|
|
omap_hsmmc_cover_is_closed(host) ? "closed" : "open");
|
|
}
|
|
|
|
static DEVICE_ATTR(cover_switch, S_IRUGO, omap_hsmmc_show_cover_switch, NULL);
|
|
|
|
static ssize_t
|
|
omap_hsmmc_show_slot_name(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev);
|
|
struct omap_hsmmc_host *host = mmc_priv(mmc);
|
|
|
|
return sprintf(buf, "%s\n", mmc_slot(host).name);
|
|
}
|
|
|
|
static DEVICE_ATTR(slot_name, S_IRUGO, omap_hsmmc_show_slot_name, NULL);
|
|
|
|
/*
|
|
* Configure the response type and send the cmd.
|
|
*/
|
|
static void
|
|
omap_hsmmc_start_command(struct omap_hsmmc_host *host, struct mmc_command *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
int cmdreg = 0, resptype = 0, cmdtype = 0;
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "%s: CMD%d, argument 0x%08x\n",
|
|
mmc_hostname(host->mmc), cmd->opcode, cmd->arg);
|
|
host->cmd = cmd;
|
|
|
|
omap_hsmmc_enable_irq(host, cmd);
|
|
|
|
host->response_busy = 0;
|
|
if (cmd->flags & MMC_RSP_PRESENT) {
|
|
if (cmd->flags & MMC_RSP_136)
|
|
resptype = 1;
|
|
else if (cmd->flags & MMC_RSP_BUSY) {
|
|
resptype = 3;
|
|
host->response_busy = 1;
|
|
} else
|
|
resptype = 2;
|
|
}
|
|
|
|
/*
|
|
* Unlike OMAP1 controller, the cmdtype does not seem to be based on
|
|
* ac, bc, adtc, bcr. Only commands ending an open ended transfer need
|
|
* a val of 0x3, rest 0x0.
|
|
*/
|
|
if (cmd == host->mrq->stop)
|
|
cmdtype = 0x3;
|
|
|
|
cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22);
|
|
|
|
if (data) {
|
|
cmdreg |= DP_SELECT | MSBS | BCE;
|
|
if (data->flags & MMC_DATA_READ)
|
|
cmdreg |= DDIR;
|
|
else
|
|
cmdreg &= ~(DDIR);
|
|
}
|
|
|
|
if (host->use_dma)
|
|
cmdreg |= DMA_EN;
|
|
|
|
host->req_in_progress = 1;
|
|
|
|
OMAP_HSMMC_WRITE(host->base, ARG, cmd->arg);
|
|
OMAP_HSMMC_WRITE(host->base, CMD, cmdreg);
|
|
}
|
|
|
|
static int
|
|
omap_hsmmc_get_dma_dir(struct omap_hsmmc_host *host, struct mmc_data *data)
|
|
{
|
|
if (data->flags & MMC_DATA_WRITE)
|
|
return DMA_TO_DEVICE;
|
|
else
|
|
return DMA_FROM_DEVICE;
|
|
}
|
|
|
|
static void omap_hsmmc_request_done(struct omap_hsmmc_host *host, struct mmc_request *mrq)
|
|
{
|
|
int dma_ch;
|
|
|
|
spin_lock(&host->irq_lock);
|
|
host->req_in_progress = 0;
|
|
dma_ch = host->dma_ch;
|
|
spin_unlock(&host->irq_lock);
|
|
|
|
omap_hsmmc_disable_irq(host);
|
|
/* Do not complete the request if DMA is still in progress */
|
|
if (mrq->data && host->use_dma && dma_ch != -1)
|
|
return;
|
|
host->mrq = NULL;
|
|
mmc_request_done(host->mmc, mrq);
|
|
}
|
|
|
|
/*
|
|
* Notify the transfer complete to MMC core
|
|
*/
|
|
static void
|
|
omap_hsmmc_xfer_done(struct omap_hsmmc_host *host, struct mmc_data *data)
|
|
{
|
|
if (!data) {
|
|
struct mmc_request *mrq = host->mrq;
|
|
|
|
/* TC before CC from CMD6 - don't know why, but it happens */
|
|
if (host->cmd && host->cmd->opcode == 6 &&
|
|
host->response_busy) {
|
|
host->response_busy = 0;
|
|
return;
|
|
}
|
|
|
|
omap_hsmmc_request_done(host, mrq);
|
|
return;
|
|
}
|
|
|
|
host->data = NULL;
|
|
|
|
if (!data->error)
|
|
data->bytes_xfered += data->blocks * (data->blksz);
|
|
else
|
|
data->bytes_xfered = 0;
|
|
|
|
if (!data->stop) {
|
|
omap_hsmmc_request_done(host, data->mrq);
|
|
return;
|
|
}
|
|
omap_hsmmc_start_command(host, data->stop, NULL);
|
|
}
|
|
|
|
/*
|
|
* Notify the core about command completion
|
|
*/
|
|
static void
|
|
omap_hsmmc_cmd_done(struct omap_hsmmc_host *host, struct mmc_command *cmd)
|
|
{
|
|
host->cmd = NULL;
|
|
|
|
if (cmd->flags & MMC_RSP_PRESENT) {
|
|
if (cmd->flags & MMC_RSP_136) {
|
|
/* response type 2 */
|
|
cmd->resp[3] = OMAP_HSMMC_READ(host->base, RSP10);
|
|
cmd->resp[2] = OMAP_HSMMC_READ(host->base, RSP32);
|
|
cmd->resp[1] = OMAP_HSMMC_READ(host->base, RSP54);
|
|
cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP76);
|
|
} else {
|
|
/* response types 1, 1b, 3, 4, 5, 6 */
|
|
cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP10);
|
|
}
|
|
}
|
|
if ((host->data == NULL && !host->response_busy) || cmd->error)
|
|
omap_hsmmc_request_done(host, cmd->mrq);
|
|
}
|
|
|
|
/*
|
|
* DMA clean up for command errors
|
|
*/
|
|
static void omap_hsmmc_dma_cleanup(struct omap_hsmmc_host *host, int errno)
|
|
{
|
|
int dma_ch;
|
|
|
|
host->data->error = errno;
|
|
|
|
spin_lock(&host->irq_lock);
|
|
dma_ch = host->dma_ch;
|
|
host->dma_ch = -1;
|
|
spin_unlock(&host->irq_lock);
|
|
|
|
if (host->use_dma && dma_ch != -1) {
|
|
dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, host->dma_len,
|
|
omap_hsmmc_get_dma_dir(host, host->data));
|
|
omap_free_dma(dma_ch);
|
|
}
|
|
host->data = NULL;
|
|
}
|
|
|
|
/*
|
|
* Readable error output
|
|
*/
|
|
#ifdef CONFIG_MMC_DEBUG
|
|
static void omap_hsmmc_report_irq(struct omap_hsmmc_host *host, u32 status)
|
|
{
|
|
/* --- means reserved bit without definition at documentation */
|
|
static const char *omap_hsmmc_status_bits[] = {
|
|
"CC", "TC", "BGE", "---", "BWR", "BRR", "---", "---", "CIRQ",
|
|
"OBI", "---", "---", "---", "---", "---", "ERRI", "CTO", "CCRC",
|
|
"CEB", "CIE", "DTO", "DCRC", "DEB", "---", "ACE", "---",
|
|
"---", "---", "---", "CERR", "CERR", "BADA", "---", "---", "---"
|
|
};
|
|
char res[256];
|
|
char *buf = res;
|
|
int len, i;
|
|
|
|
len = sprintf(buf, "MMC IRQ 0x%x :", status);
|
|
buf += len;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(omap_hsmmc_status_bits); i++)
|
|
if (status & (1 << i)) {
|
|
len = sprintf(buf, " %s", omap_hsmmc_status_bits[i]);
|
|
buf += len;
|
|
}
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "%s\n", res);
|
|
}
|
|
#endif /* CONFIG_MMC_DEBUG */
|
|
|
|
/*
|
|
* MMC controller internal state machines reset
|
|
*
|
|
* Used to reset command or data internal state machines, using respectively
|
|
* SRC or SRD bit of SYSCTL register
|
|
* Can be called from interrupt context
|
|
*/
|
|
static inline void omap_hsmmc_reset_controller_fsm(struct omap_hsmmc_host *host,
|
|
unsigned long bit)
|
|
{
|
|
unsigned long i = 0;
|
|
unsigned long limit = (loops_per_jiffy *
|
|
msecs_to_jiffies(MMC_TIMEOUT_MS));
|
|
|
|
OMAP_HSMMC_WRITE(host->base, SYSCTL,
|
|
OMAP_HSMMC_READ(host->base, SYSCTL) | bit);
|
|
|
|
/*
|
|
* OMAP4 ES2 and greater has an updated reset logic.
|
|
* Monitor a 0->1 transition first
|
|
*/
|
|
if (mmc_slot(host).features & HSMMC_HAS_UPDATED_RESET) {
|
|
while ((!(OMAP_HSMMC_READ(host->base, SYSCTL) & bit))
|
|
&& (i++ < limit))
|
|
cpu_relax();
|
|
}
|
|
i = 0;
|
|
|
|
while ((OMAP_HSMMC_READ(host->base, SYSCTL) & bit) &&
|
|
(i++ < limit))
|
|
cpu_relax();
|
|
|
|
if (OMAP_HSMMC_READ(host->base, SYSCTL) & bit)
|
|
dev_err(mmc_dev(host->mmc),
|
|
"Timeout waiting on controller reset in %s\n",
|
|
__func__);
|
|
}
|
|
|
|
static void omap_hsmmc_do_irq(struct omap_hsmmc_host *host, int status)
|
|
{
|
|
struct mmc_data *data;
|
|
int end_cmd = 0, end_trans = 0;
|
|
|
|
if (!host->req_in_progress) {
|
|
do {
|
|
OMAP_HSMMC_WRITE(host->base, STAT, status);
|
|
/* Flush posted write */
|
|
status = OMAP_HSMMC_READ(host->base, STAT);
|
|
} while (status & INT_EN_MASK);
|
|
return;
|
|
}
|
|
|
|
data = host->data;
|
|
dev_dbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status);
|
|
|
|
if (status & ERR) {
|
|
#ifdef CONFIG_MMC_DEBUG
|
|
omap_hsmmc_report_irq(host, status);
|
|
#endif
|
|
if ((status & CMD_TIMEOUT) ||
|
|
(status & CMD_CRC)) {
|
|
if (host->cmd) {
|
|
if (status & CMD_TIMEOUT) {
|
|
omap_hsmmc_reset_controller_fsm(host,
|
|
SRC);
|
|
host->cmd->error = -ETIMEDOUT;
|
|
} else {
|
|
host->cmd->error = -EILSEQ;
|
|
}
|
|
end_cmd = 1;
|
|
}
|
|
if (host->data || host->response_busy) {
|
|
if (host->data)
|
|
omap_hsmmc_dma_cleanup(host,
|
|
-ETIMEDOUT);
|
|
host->response_busy = 0;
|
|
omap_hsmmc_reset_controller_fsm(host, SRD);
|
|
}
|
|
}
|
|
if ((status & DATA_TIMEOUT) ||
|
|
(status & DATA_CRC)) {
|
|
if (host->data || host->response_busy) {
|
|
int err = (status & DATA_TIMEOUT) ?
|
|
-ETIMEDOUT : -EILSEQ;
|
|
|
|
if (host->data)
|
|
omap_hsmmc_dma_cleanup(host, err);
|
|
else
|
|
host->mrq->cmd->error = err;
|
|
host->response_busy = 0;
|
|
omap_hsmmc_reset_controller_fsm(host, SRD);
|
|
end_trans = 1;
|
|
}
|
|
}
|
|
if (status & CARD_ERR) {
|
|
dev_dbg(mmc_dev(host->mmc),
|
|
"Ignoring card err CMD%d\n", host->cmd->opcode);
|
|
if (host->cmd)
|
|
end_cmd = 1;
|
|
if (host->data)
|
|
end_trans = 1;
|
|
}
|
|
}
|
|
|
|
OMAP_HSMMC_WRITE(host->base, STAT, status);
|
|
|
|
if (end_cmd || ((status & CC) && host->cmd))
|
|
omap_hsmmc_cmd_done(host, host->cmd);
|
|
if ((end_trans || (status & TC)) && host->mrq)
|
|
omap_hsmmc_xfer_done(host, data);
|
|
}
|
|
|
|
/*
|
|
* MMC controller IRQ handler
|
|
*/
|
|
static irqreturn_t omap_hsmmc_irq(int irq, void *dev_id)
|
|
{
|
|
struct omap_hsmmc_host *host = dev_id;
|
|
int status;
|
|
|
|
status = OMAP_HSMMC_READ(host->base, STAT);
|
|
do {
|
|
omap_hsmmc_do_irq(host, status);
|
|
/* Flush posted write */
|
|
status = OMAP_HSMMC_READ(host->base, STAT);
|
|
} while (status & INT_EN_MASK);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void set_sd_bus_power(struct omap_hsmmc_host *host)
|
|
{
|
|
unsigned long i;
|
|
|
|
OMAP_HSMMC_WRITE(host->base, HCTL,
|
|
OMAP_HSMMC_READ(host->base, HCTL) | SDBP);
|
|
for (i = 0; i < loops_per_jiffy; i++) {
|
|
if (OMAP_HSMMC_READ(host->base, HCTL) & SDBP)
|
|
break;
|
|
cpu_relax();
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Switch MMC interface voltage ... only relevant for MMC1.
|
|
*
|
|
* MMC2 and MMC3 use fixed 1.8V levels, and maybe a transceiver.
|
|
* The MMC2 transceiver controls are used instead of DAT4..DAT7.
|
|
* Some chips, like eMMC ones, use internal transceivers.
|
|
*/
|
|
static int omap_hsmmc_switch_opcond(struct omap_hsmmc_host *host, int vdd)
|
|
{
|
|
u32 reg_val = 0;
|
|
int ret;
|
|
|
|
/* Disable the clocks */
|
|
clk_disable(host->fclk);
|
|
clk_disable(host->iclk);
|
|
if (host->got_dbclk)
|
|
clk_disable(host->dbclk);
|
|
|
|
/* Turn the power off */
|
|
ret = mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
|
|
|
|
/* Turn the power ON with given VDD 1.8 or 3.0v */
|
|
if (!ret)
|
|
ret = mmc_slot(host).set_power(host->dev, host->slot_id, 1,
|
|
vdd);
|
|
clk_enable(host->iclk);
|
|
clk_enable(host->fclk);
|
|
if (host->got_dbclk)
|
|
clk_enable(host->dbclk);
|
|
|
|
if (ret != 0)
|
|
goto err;
|
|
|
|
OMAP_HSMMC_WRITE(host->base, HCTL,
|
|
OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR);
|
|
reg_val = OMAP_HSMMC_READ(host->base, HCTL);
|
|
|
|
/*
|
|
* If a MMC dual voltage card is detected, the set_ios fn calls
|
|
* this fn with VDD bit set for 1.8V. Upon card removal from the
|
|
* slot, omap_hsmmc_set_ios sets the VDD back to 3V on MMC_POWER_OFF.
|
|
*
|
|
* Cope with a bit of slop in the range ... per data sheets:
|
|
* - "1.8V" for vdds_mmc1/vdds_mmc1a can be up to 2.45V max,
|
|
* but recommended values are 1.71V to 1.89V
|
|
* - "3.0V" for vdds_mmc1/vdds_mmc1a can be up to 3.5V max,
|
|
* but recommended values are 2.7V to 3.3V
|
|
*
|
|
* Board setup code shouldn't permit anything very out-of-range.
|
|
* TWL4030-family VMMC1 and VSIM regulators are fine (avoiding the
|
|
* middle range) but VSIM can't power DAT4..DAT7 at more than 3V.
|
|
*/
|
|
if ((1 << vdd) <= MMC_VDD_23_24)
|
|
reg_val |= SDVS18;
|
|
else
|
|
reg_val |= SDVS30;
|
|
|
|
OMAP_HSMMC_WRITE(host->base, HCTL, reg_val);
|
|
set_sd_bus_power(host);
|
|
|
|
return 0;
|
|
err:
|
|
dev_dbg(mmc_dev(host->mmc), "Unable to switch operating voltage\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Protect the card while the cover is open */
|
|
static void omap_hsmmc_protect_card(struct omap_hsmmc_host *host)
|
|
{
|
|
if (!mmc_slot(host).get_cover_state)
|
|
return;
|
|
|
|
host->reqs_blocked = 0;
|
|
if (mmc_slot(host).get_cover_state(host->dev, host->slot_id)) {
|
|
if (host->protect_card) {
|
|
printk(KERN_INFO "%s: cover is closed, "
|
|
"card is now accessible\n",
|
|
mmc_hostname(host->mmc));
|
|
host->protect_card = 0;
|
|
}
|
|
} else {
|
|
if (!host->protect_card) {
|
|
printk(KERN_INFO "%s: cover is open, "
|
|
"card is now inaccessible\n",
|
|
mmc_hostname(host->mmc));
|
|
host->protect_card = 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Work Item to notify the core about card insertion/removal
|
|
*/
|
|
static void omap_hsmmc_detect(struct work_struct *work)
|
|
{
|
|
struct omap_hsmmc_host *host =
|
|
container_of(work, struct omap_hsmmc_host, mmc_carddetect_work);
|
|
struct omap_mmc_slot_data *slot = &mmc_slot(host);
|
|
int carddetect;
|
|
|
|
if (host->suspended)
|
|
return;
|
|
|
|
sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch");
|
|
|
|
if (slot->card_detect)
|
|
carddetect = slot->card_detect(host->dev, host->slot_id);
|
|
else {
|
|
omap_hsmmc_protect_card(host);
|
|
carddetect = -ENOSYS;
|
|
}
|
|
|
|
if (carddetect)
|
|
mmc_detect_change(host->mmc, (HZ * 200) / 1000);
|
|
else
|
|
mmc_detect_change(host->mmc, (HZ * 50) / 1000);
|
|
}
|
|
|
|
/*
|
|
* ISR for handling card insertion and removal
|
|
*/
|
|
static irqreturn_t omap_hsmmc_cd_handler(int irq, void *dev_id)
|
|
{
|
|
struct omap_hsmmc_host *host = (struct omap_hsmmc_host *)dev_id;
|
|
|
|
if (host->suspended)
|
|
return IRQ_HANDLED;
|
|
schedule_work(&host->mmc_carddetect_work);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int omap_hsmmc_get_dma_sync_dev(struct omap_hsmmc_host *host,
|
|
struct mmc_data *data)
|
|
{
|
|
int sync_dev;
|
|
|
|
if (data->flags & MMC_DATA_WRITE)
|
|
sync_dev = host->dma_line_tx;
|
|
else
|
|
sync_dev = host->dma_line_rx;
|
|
return sync_dev;
|
|
}
|
|
|
|
static void omap_hsmmc_config_dma_params(struct omap_hsmmc_host *host,
|
|
struct mmc_data *data,
|
|
struct scatterlist *sgl)
|
|
{
|
|
int blksz, nblk, dma_ch;
|
|
|
|
dma_ch = host->dma_ch;
|
|
if (data->flags & MMC_DATA_WRITE) {
|
|
omap_set_dma_dest_params(dma_ch, 0, OMAP_DMA_AMODE_CONSTANT,
|
|
(host->mapbase + OMAP_HSMMC_DATA), 0, 0);
|
|
omap_set_dma_src_params(dma_ch, 0, OMAP_DMA_AMODE_POST_INC,
|
|
sg_dma_address(sgl), 0, 0);
|
|
} else {
|
|
omap_set_dma_src_params(dma_ch, 0, OMAP_DMA_AMODE_CONSTANT,
|
|
(host->mapbase + OMAP_HSMMC_DATA), 0, 0);
|
|
omap_set_dma_dest_params(dma_ch, 0, OMAP_DMA_AMODE_POST_INC,
|
|
sg_dma_address(sgl), 0, 0);
|
|
}
|
|
|
|
blksz = host->data->blksz;
|
|
nblk = sg_dma_len(sgl) / blksz;
|
|
|
|
omap_set_dma_transfer_params(dma_ch, OMAP_DMA_DATA_TYPE_S32,
|
|
blksz / 4, nblk, OMAP_DMA_SYNC_FRAME,
|
|
omap_hsmmc_get_dma_sync_dev(host, data),
|
|
!(data->flags & MMC_DATA_WRITE));
|
|
|
|
omap_start_dma(dma_ch);
|
|
}
|
|
|
|
/*
|
|
* DMA call back function
|
|
*/
|
|
static void omap_hsmmc_dma_cb(int lch, u16 ch_status, void *cb_data)
|
|
{
|
|
struct omap_hsmmc_host *host = cb_data;
|
|
struct mmc_data *data = host->mrq->data;
|
|
int dma_ch, req_in_progress;
|
|
|
|
if (!(ch_status & OMAP_DMA_BLOCK_IRQ)) {
|
|
dev_warn(mmc_dev(host->mmc), "unexpected dma status %x\n",
|
|
ch_status);
|
|
return;
|
|
}
|
|
|
|
spin_lock(&host->irq_lock);
|
|
if (host->dma_ch < 0) {
|
|
spin_unlock(&host->irq_lock);
|
|
return;
|
|
}
|
|
|
|
host->dma_sg_idx++;
|
|
if (host->dma_sg_idx < host->dma_len) {
|
|
/* Fire up the next transfer. */
|
|
omap_hsmmc_config_dma_params(host, data,
|
|
data->sg + host->dma_sg_idx);
|
|
spin_unlock(&host->irq_lock);
|
|
return;
|
|
}
|
|
|
|
dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len,
|
|
omap_hsmmc_get_dma_dir(host, data));
|
|
|
|
req_in_progress = host->req_in_progress;
|
|
dma_ch = host->dma_ch;
|
|
host->dma_ch = -1;
|
|
spin_unlock(&host->irq_lock);
|
|
|
|
omap_free_dma(dma_ch);
|
|
|
|
/* If DMA has finished after TC, complete the request */
|
|
if (!req_in_progress) {
|
|
struct mmc_request *mrq = host->mrq;
|
|
|
|
host->mrq = NULL;
|
|
mmc_request_done(host->mmc, mrq);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Routine to configure and start DMA for the MMC card
|
|
*/
|
|
static int omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host,
|
|
struct mmc_request *req)
|
|
{
|
|
int dma_ch = 0, ret = 0, i;
|
|
struct mmc_data *data = req->data;
|
|
|
|
/* Sanity check: all the SG entries must be aligned by block size. */
|
|
for (i = 0; i < data->sg_len; i++) {
|
|
struct scatterlist *sgl;
|
|
|
|
sgl = data->sg + i;
|
|
if (sgl->length % data->blksz)
|
|
return -EINVAL;
|
|
}
|
|
if ((data->blksz % 4) != 0)
|
|
/* REVISIT: The MMC buffer increments only when MSB is written.
|
|
* Return error for blksz which is non multiple of four.
|
|
*/
|
|
return -EINVAL;
|
|
|
|
BUG_ON(host->dma_ch != -1);
|
|
|
|
ret = omap_request_dma(omap_hsmmc_get_dma_sync_dev(host, data),
|
|
"MMC/SD", omap_hsmmc_dma_cb, host, &dma_ch);
|
|
if (ret != 0) {
|
|
dev_err(mmc_dev(host->mmc),
|
|
"%s: omap_request_dma() failed with %d\n",
|
|
mmc_hostname(host->mmc), ret);
|
|
return ret;
|
|
}
|
|
|
|
host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg,
|
|
data->sg_len, omap_hsmmc_get_dma_dir(host, data));
|
|
host->dma_ch = dma_ch;
|
|
host->dma_sg_idx = 0;
|
|
|
|
omap_hsmmc_config_dma_params(host, data, data->sg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void set_data_timeout(struct omap_hsmmc_host *host,
|
|
unsigned int timeout_ns,
|
|
unsigned int timeout_clks)
|
|
{
|
|
unsigned int timeout, cycle_ns;
|
|
uint32_t reg, clkd, dto = 0;
|
|
|
|
reg = OMAP_HSMMC_READ(host->base, SYSCTL);
|
|
clkd = (reg & CLKD_MASK) >> CLKD_SHIFT;
|
|
if (clkd == 0)
|
|
clkd = 1;
|
|
|
|
cycle_ns = 1000000000 / (clk_get_rate(host->fclk) / clkd);
|
|
timeout = timeout_ns / cycle_ns;
|
|
timeout += timeout_clks;
|
|
if (timeout) {
|
|
while ((timeout & 0x80000000) == 0) {
|
|
dto += 1;
|
|
timeout <<= 1;
|
|
}
|
|
dto = 31 - dto;
|
|
timeout <<= 1;
|
|
if (timeout && dto)
|
|
dto += 1;
|
|
if (dto >= 13)
|
|
dto -= 13;
|
|
else
|
|
dto = 0;
|
|
if (dto > 14)
|
|
dto = 14;
|
|
}
|
|
|
|
reg &= ~DTO_MASK;
|
|
reg |= dto << DTO_SHIFT;
|
|
OMAP_HSMMC_WRITE(host->base, SYSCTL, reg);
|
|
}
|
|
|
|
/*
|
|
* Configure block length for MMC/SD cards and initiate the transfer.
|
|
*/
|
|
static int
|
|
omap_hsmmc_prepare_data(struct omap_hsmmc_host *host, struct mmc_request *req)
|
|
{
|
|
int ret;
|
|
host->data = req->data;
|
|
|
|
if (req->data == NULL) {
|
|
OMAP_HSMMC_WRITE(host->base, BLK, 0);
|
|
/*
|
|
* Set an arbitrary 100ms data timeout for commands with
|
|
* busy signal.
|
|
*/
|
|
if (req->cmd->flags & MMC_RSP_BUSY)
|
|
set_data_timeout(host, 100000000U, 0);
|
|
return 0;
|
|
}
|
|
|
|
OMAP_HSMMC_WRITE(host->base, BLK, (req->data->blksz)
|
|
| (req->data->blocks << 16));
|
|
set_data_timeout(host, req->data->timeout_ns, req->data->timeout_clks);
|
|
|
|
if (host->use_dma) {
|
|
ret = omap_hsmmc_start_dma_transfer(host, req);
|
|
if (ret != 0) {
|
|
dev_dbg(mmc_dev(host->mmc), "MMC start dma failure\n");
|
|
return ret;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Request function. for read/write operation
|
|
*/
|
|
static void omap_hsmmc_request(struct mmc_host *mmc, struct mmc_request *req)
|
|
{
|
|
struct omap_hsmmc_host *host = mmc_priv(mmc);
|
|
int err;
|
|
|
|
BUG_ON(host->req_in_progress);
|
|
BUG_ON(host->dma_ch != -1);
|
|
if (host->protect_card) {
|
|
if (host->reqs_blocked < 3) {
|
|
/*
|
|
* Ensure the controller is left in a consistent
|
|
* state by resetting the command and data state
|
|
* machines.
|
|
*/
|
|
omap_hsmmc_reset_controller_fsm(host, SRD);
|
|
omap_hsmmc_reset_controller_fsm(host, SRC);
|
|
host->reqs_blocked += 1;
|
|
}
|
|
req->cmd->error = -EBADF;
|
|
if (req->data)
|
|
req->data->error = -EBADF;
|
|
req->cmd->retries = 0;
|
|
mmc_request_done(mmc, req);
|
|
return;
|
|
} else if (host->reqs_blocked)
|
|
host->reqs_blocked = 0;
|
|
WARN_ON(host->mrq != NULL);
|
|
host->mrq = req;
|
|
err = omap_hsmmc_prepare_data(host, req);
|
|
if (err) {
|
|
req->cmd->error = err;
|
|
if (req->data)
|
|
req->data->error = err;
|
|
host->mrq = NULL;
|
|
mmc_request_done(mmc, req);
|
|
return;
|
|
}
|
|
|
|
omap_hsmmc_start_command(host, req->cmd, req->data);
|
|
}
|
|
|
|
/* Routine to configure clock values. Exposed API to core */
|
|
static void omap_hsmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
{
|
|
struct omap_hsmmc_host *host = mmc_priv(mmc);
|
|
u16 dsor = 0;
|
|
unsigned long regval;
|
|
unsigned long timeout;
|
|
u32 con;
|
|
int do_send_init_stream = 0;
|
|
|
|
mmc_host_enable(host->mmc);
|
|
|
|
if (ios->power_mode != host->power_mode) {
|
|
switch (ios->power_mode) {
|
|
case MMC_POWER_OFF:
|
|
mmc_slot(host).set_power(host->dev, host->slot_id,
|
|
0, 0);
|
|
host->vdd = 0;
|
|
break;
|
|
case MMC_POWER_UP:
|
|
mmc_slot(host).set_power(host->dev, host->slot_id,
|
|
1, ios->vdd);
|
|
host->vdd = ios->vdd;
|
|
break;
|
|
case MMC_POWER_ON:
|
|
do_send_init_stream = 1;
|
|
break;
|
|
}
|
|
host->power_mode = ios->power_mode;
|
|
}
|
|
|
|
/* FIXME: set registers based only on changes to ios */
|
|
|
|
con = OMAP_HSMMC_READ(host->base, CON);
|
|
switch (mmc->ios.bus_width) {
|
|
case MMC_BUS_WIDTH_8:
|
|
OMAP_HSMMC_WRITE(host->base, CON, con | DW8);
|
|
break;
|
|
case MMC_BUS_WIDTH_4:
|
|
OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8);
|
|
OMAP_HSMMC_WRITE(host->base, HCTL,
|
|
OMAP_HSMMC_READ(host->base, HCTL) | FOUR_BIT);
|
|
break;
|
|
case MMC_BUS_WIDTH_1:
|
|
OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8);
|
|
OMAP_HSMMC_WRITE(host->base, HCTL,
|
|
OMAP_HSMMC_READ(host->base, HCTL) & ~FOUR_BIT);
|
|
break;
|
|
}
|
|
|
|
if (host->pdata->controller_flags & OMAP_HSMMC_SUPPORTS_DUAL_VOLT) {
|
|
/* Only MMC1 can interface at 3V without some flavor
|
|
* of external transceiver; but they all handle 1.8V.
|
|
*/
|
|
if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) &&
|
|
(ios->vdd == DUAL_VOLT_OCR_BIT)) {
|
|
/*
|
|
* The mmc_select_voltage fn of the core does
|
|
* not seem to set the power_mode to
|
|
* MMC_POWER_UP upon recalculating the voltage.
|
|
* vdd 1.8v.
|
|
*/
|
|
if (omap_hsmmc_switch_opcond(host, ios->vdd) != 0)
|
|
dev_dbg(mmc_dev(host->mmc),
|
|
"Switch operation failed\n");
|
|
}
|
|
}
|
|
|
|
if (ios->clock) {
|
|
dsor = OMAP_MMC_MASTER_CLOCK / ios->clock;
|
|
if (dsor < 1)
|
|
dsor = 1;
|
|
|
|
if (OMAP_MMC_MASTER_CLOCK / dsor > ios->clock)
|
|
dsor++;
|
|
|
|
if (dsor > 250)
|
|
dsor = 250;
|
|
}
|
|
omap_hsmmc_stop_clock(host);
|
|
regval = OMAP_HSMMC_READ(host->base, SYSCTL);
|
|
regval = regval & ~(CLKD_MASK);
|
|
regval = regval | (dsor << 6) | (DTO << 16);
|
|
OMAP_HSMMC_WRITE(host->base, SYSCTL, regval);
|
|
OMAP_HSMMC_WRITE(host->base, SYSCTL,
|
|
OMAP_HSMMC_READ(host->base, SYSCTL) | ICE);
|
|
|
|
/* Wait till the ICS bit is set */
|
|
timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
|
|
while ((OMAP_HSMMC_READ(host->base, SYSCTL) & ICS) != ICS
|
|
&& time_before(jiffies, timeout))
|
|
msleep(1);
|
|
|
|
OMAP_HSMMC_WRITE(host->base, SYSCTL,
|
|
OMAP_HSMMC_READ(host->base, SYSCTL) | CEN);
|
|
|
|
if (do_send_init_stream)
|
|
send_init_stream(host);
|
|
|
|
con = OMAP_HSMMC_READ(host->base, CON);
|
|
if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
|
|
OMAP_HSMMC_WRITE(host->base, CON, con | OD);
|
|
else
|
|
OMAP_HSMMC_WRITE(host->base, CON, con & ~OD);
|
|
|
|
if (host->power_mode == MMC_POWER_OFF)
|
|
mmc_host_disable(host->mmc);
|
|
else
|
|
mmc_host_lazy_disable(host->mmc);
|
|
}
|
|
|
|
static int omap_hsmmc_get_cd(struct mmc_host *mmc)
|
|
{
|
|
struct omap_hsmmc_host *host = mmc_priv(mmc);
|
|
|
|
if (!mmc_slot(host).card_detect)
|
|
return -ENOSYS;
|
|
return mmc_slot(host).card_detect(host->dev, host->slot_id);
|
|
}
|
|
|
|
static int omap_hsmmc_get_ro(struct mmc_host *mmc)
|
|
{
|
|
struct omap_hsmmc_host *host = mmc_priv(mmc);
|
|
|
|
if (!mmc_slot(host).get_ro)
|
|
return -ENOSYS;
|
|
return mmc_slot(host).get_ro(host->dev, 0);
|
|
}
|
|
|
|
static void omap_hsmmc_init_card(struct mmc_host *mmc, struct mmc_card *card)
|
|
{
|
|
struct omap_hsmmc_host *host = mmc_priv(mmc);
|
|
|
|
if (mmc_slot(host).init_card)
|
|
mmc_slot(host).init_card(card);
|
|
}
|
|
|
|
static void omap_hsmmc_conf_bus_power(struct omap_hsmmc_host *host)
|
|
{
|
|
u32 hctl, capa, value;
|
|
|
|
/* Only MMC1 supports 3.0V */
|
|
if (host->pdata->controller_flags & OMAP_HSMMC_SUPPORTS_DUAL_VOLT) {
|
|
hctl = SDVS30;
|
|
capa = VS30 | VS18;
|
|
} else {
|
|
hctl = SDVS18;
|
|
capa = VS18;
|
|
}
|
|
|
|
value = OMAP_HSMMC_READ(host->base, HCTL) & ~SDVS_MASK;
|
|
OMAP_HSMMC_WRITE(host->base, HCTL, value | hctl);
|
|
|
|
value = OMAP_HSMMC_READ(host->base, CAPA);
|
|
OMAP_HSMMC_WRITE(host->base, CAPA, value | capa);
|
|
|
|
/* Set the controller to AUTO IDLE mode */
|
|
value = OMAP_HSMMC_READ(host->base, SYSCONFIG);
|
|
OMAP_HSMMC_WRITE(host->base, SYSCONFIG, value | AUTOIDLE);
|
|
|
|
/* Set SD bus power bit */
|
|
set_sd_bus_power(host);
|
|
}
|
|
|
|
/*
|
|
* Dynamic power saving handling, FSM:
|
|
* ENABLED -> DISABLED -> CARDSLEEP / REGSLEEP -> OFF
|
|
* ^___________| | |
|
|
* |______________________|______________________|
|
|
*
|
|
* ENABLED: mmc host is fully functional
|
|
* DISABLED: fclk is off
|
|
* CARDSLEEP: fclk is off, card is asleep, voltage regulator is asleep
|
|
* REGSLEEP: fclk is off, voltage regulator is asleep
|
|
* OFF: fclk is off, voltage regulator is off
|
|
*
|
|
* Transition handlers return the timeout for the next state transition
|
|
* or negative error.
|
|
*/
|
|
|
|
enum {ENABLED = 0, DISABLED, CARDSLEEP, REGSLEEP, OFF};
|
|
|
|
/* Handler for [ENABLED -> DISABLED] transition */
|
|
static int omap_hsmmc_enabled_to_disabled(struct omap_hsmmc_host *host)
|
|
{
|
|
omap_hsmmc_context_save(host);
|
|
clk_disable(host->fclk);
|
|
host->dpm_state = DISABLED;
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "ENABLED -> DISABLED\n");
|
|
|
|
if (host->power_mode == MMC_POWER_OFF)
|
|
return 0;
|
|
|
|
return OMAP_MMC_SLEEP_TIMEOUT;
|
|
}
|
|
|
|
/* Handler for [DISABLED -> REGSLEEP / CARDSLEEP] transition */
|
|
static int omap_hsmmc_disabled_to_sleep(struct omap_hsmmc_host *host)
|
|
{
|
|
int err, new_state;
|
|
|
|
if (!mmc_try_claim_host(host->mmc))
|
|
return 0;
|
|
|
|
clk_enable(host->fclk);
|
|
omap_hsmmc_context_restore(host);
|
|
if (mmc_card_can_sleep(host->mmc)) {
|
|
err = mmc_card_sleep(host->mmc);
|
|
if (err < 0) {
|
|
clk_disable(host->fclk);
|
|
mmc_release_host(host->mmc);
|
|
return err;
|
|
}
|
|
new_state = CARDSLEEP;
|
|
} else {
|
|
new_state = REGSLEEP;
|
|
}
|
|
if (mmc_slot(host).set_sleep)
|
|
mmc_slot(host).set_sleep(host->dev, host->slot_id, 1, 0,
|
|
new_state == CARDSLEEP);
|
|
/* FIXME: turn off bus power and perhaps interrupts too */
|
|
clk_disable(host->fclk);
|
|
host->dpm_state = new_state;
|
|
|
|
mmc_release_host(host->mmc);
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "DISABLED -> %s\n",
|
|
host->dpm_state == CARDSLEEP ? "CARDSLEEP" : "REGSLEEP");
|
|
|
|
if (mmc_slot(host).no_off)
|
|
return 0;
|
|
|
|
if ((host->mmc->caps & MMC_CAP_NONREMOVABLE) ||
|
|
mmc_slot(host).card_detect ||
|
|
(mmc_slot(host).get_cover_state &&
|
|
mmc_slot(host).get_cover_state(host->dev, host->slot_id)))
|
|
return OMAP_MMC_OFF_TIMEOUT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Handler for [REGSLEEP / CARDSLEEP -> OFF] transition */
|
|
static int omap_hsmmc_sleep_to_off(struct omap_hsmmc_host *host)
|
|
{
|
|
if (!mmc_try_claim_host(host->mmc))
|
|
return 0;
|
|
|
|
if (mmc_slot(host).no_off)
|
|
return 0;
|
|
|
|
if (!((host->mmc->caps & MMC_CAP_NONREMOVABLE) ||
|
|
mmc_slot(host).card_detect ||
|
|
(mmc_slot(host).get_cover_state &&
|
|
mmc_slot(host).get_cover_state(host->dev, host->slot_id)))) {
|
|
mmc_release_host(host->mmc);
|
|
return 0;
|
|
}
|
|
|
|
mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
|
|
host->vdd = 0;
|
|
host->power_mode = MMC_POWER_OFF;
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "%s -> OFF\n",
|
|
host->dpm_state == CARDSLEEP ? "CARDSLEEP" : "REGSLEEP");
|
|
|
|
host->dpm_state = OFF;
|
|
|
|
mmc_release_host(host->mmc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Handler for [DISABLED -> ENABLED] transition */
|
|
static int omap_hsmmc_disabled_to_enabled(struct omap_hsmmc_host *host)
|
|
{
|
|
int err;
|
|
|
|
err = clk_enable(host->fclk);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
omap_hsmmc_context_restore(host);
|
|
host->dpm_state = ENABLED;
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "DISABLED -> ENABLED\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Handler for [SLEEP -> ENABLED] transition */
|
|
static int omap_hsmmc_sleep_to_enabled(struct omap_hsmmc_host *host)
|
|
{
|
|
if (!mmc_try_claim_host(host->mmc))
|
|
return 0;
|
|
|
|
clk_enable(host->fclk);
|
|
omap_hsmmc_context_restore(host);
|
|
if (mmc_slot(host).set_sleep)
|
|
mmc_slot(host).set_sleep(host->dev, host->slot_id, 0,
|
|
host->vdd, host->dpm_state == CARDSLEEP);
|
|
if (mmc_card_can_sleep(host->mmc))
|
|
mmc_card_awake(host->mmc);
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "%s -> ENABLED\n",
|
|
host->dpm_state == CARDSLEEP ? "CARDSLEEP" : "REGSLEEP");
|
|
|
|
host->dpm_state = ENABLED;
|
|
|
|
mmc_release_host(host->mmc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Handler for [OFF -> ENABLED] transition */
|
|
static int omap_hsmmc_off_to_enabled(struct omap_hsmmc_host *host)
|
|
{
|
|
clk_enable(host->fclk);
|
|
|
|
omap_hsmmc_context_restore(host);
|
|
omap_hsmmc_conf_bus_power(host);
|
|
mmc_power_restore_host(host->mmc);
|
|
|
|
host->dpm_state = ENABLED;
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "OFF -> ENABLED\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Bring MMC host to ENABLED from any other PM state.
|
|
*/
|
|
static int omap_hsmmc_enable(struct mmc_host *mmc)
|
|
{
|
|
struct omap_hsmmc_host *host = mmc_priv(mmc);
|
|
|
|
switch (host->dpm_state) {
|
|
case DISABLED:
|
|
return omap_hsmmc_disabled_to_enabled(host);
|
|
case CARDSLEEP:
|
|
case REGSLEEP:
|
|
return omap_hsmmc_sleep_to_enabled(host);
|
|
case OFF:
|
|
return omap_hsmmc_off_to_enabled(host);
|
|
default:
|
|
dev_dbg(mmc_dev(host->mmc), "UNKNOWN state\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Bring MMC host in PM state (one level deeper).
|
|
*/
|
|
static int omap_hsmmc_disable(struct mmc_host *mmc, int lazy)
|
|
{
|
|
struct omap_hsmmc_host *host = mmc_priv(mmc);
|
|
|
|
switch (host->dpm_state) {
|
|
case ENABLED: {
|
|
int delay;
|
|
|
|
delay = omap_hsmmc_enabled_to_disabled(host);
|
|
if (lazy || delay < 0)
|
|
return delay;
|
|
return 0;
|
|
}
|
|
case DISABLED:
|
|
return omap_hsmmc_disabled_to_sleep(host);
|
|
case CARDSLEEP:
|
|
case REGSLEEP:
|
|
return omap_hsmmc_sleep_to_off(host);
|
|
default:
|
|
dev_dbg(mmc_dev(host->mmc), "UNKNOWN state\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int omap_hsmmc_enable_fclk(struct mmc_host *mmc)
|
|
{
|
|
struct omap_hsmmc_host *host = mmc_priv(mmc);
|
|
int err;
|
|
|
|
err = clk_enable(host->fclk);
|
|
if (err)
|
|
return err;
|
|
dev_dbg(mmc_dev(host->mmc), "mmc_fclk: enabled\n");
|
|
omap_hsmmc_context_restore(host);
|
|
return 0;
|
|
}
|
|
|
|
static int omap_hsmmc_disable_fclk(struct mmc_host *mmc, int lazy)
|
|
{
|
|
struct omap_hsmmc_host *host = mmc_priv(mmc);
|
|
|
|
omap_hsmmc_context_save(host);
|
|
clk_disable(host->fclk);
|
|
dev_dbg(mmc_dev(host->mmc), "mmc_fclk: disabled\n");
|
|
return 0;
|
|
}
|
|
|
|
static const struct mmc_host_ops omap_hsmmc_ops = {
|
|
.enable = omap_hsmmc_enable_fclk,
|
|
.disable = omap_hsmmc_disable_fclk,
|
|
.request = omap_hsmmc_request,
|
|
.set_ios = omap_hsmmc_set_ios,
|
|
.get_cd = omap_hsmmc_get_cd,
|
|
.get_ro = omap_hsmmc_get_ro,
|
|
.init_card = omap_hsmmc_init_card,
|
|
/* NYET -- enable_sdio_irq */
|
|
};
|
|
|
|
static const struct mmc_host_ops omap_hsmmc_ps_ops = {
|
|
.enable = omap_hsmmc_enable,
|
|
.disable = omap_hsmmc_disable,
|
|
.request = omap_hsmmc_request,
|
|
.set_ios = omap_hsmmc_set_ios,
|
|
.get_cd = omap_hsmmc_get_cd,
|
|
.get_ro = omap_hsmmc_get_ro,
|
|
.init_card = omap_hsmmc_init_card,
|
|
/* NYET -- enable_sdio_irq */
|
|
};
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
|
|
static int omap_hsmmc_regs_show(struct seq_file *s, void *data)
|
|
{
|
|
struct mmc_host *mmc = s->private;
|
|
struct omap_hsmmc_host *host = mmc_priv(mmc);
|
|
int context_loss = 0;
|
|
|
|
if (host->pdata->get_context_loss_count)
|
|
context_loss = host->pdata->get_context_loss_count(host->dev);
|
|
|
|
seq_printf(s, "mmc%d:\n"
|
|
" enabled:\t%d\n"
|
|
" dpm_state:\t%d\n"
|
|
" nesting_cnt:\t%d\n"
|
|
" ctx_loss:\t%d:%d\n"
|
|
"\nregs:\n",
|
|
mmc->index, mmc->enabled ? 1 : 0,
|
|
host->dpm_state, mmc->nesting_cnt,
|
|
host->context_loss, context_loss);
|
|
|
|
if (host->suspended || host->dpm_state == OFF) {
|
|
seq_printf(s, "host suspended, can't read registers\n");
|
|
return 0;
|
|
}
|
|
|
|
if (clk_enable(host->fclk) != 0) {
|
|
seq_printf(s, "can't read the regs\n");
|
|
return 0;
|
|
}
|
|
|
|
seq_printf(s, "SYSCONFIG:\t0x%08x\n",
|
|
OMAP_HSMMC_READ(host->base, SYSCONFIG));
|
|
seq_printf(s, "CON:\t\t0x%08x\n",
|
|
OMAP_HSMMC_READ(host->base, CON));
|
|
seq_printf(s, "HCTL:\t\t0x%08x\n",
|
|
OMAP_HSMMC_READ(host->base, HCTL));
|
|
seq_printf(s, "SYSCTL:\t\t0x%08x\n",
|
|
OMAP_HSMMC_READ(host->base, SYSCTL));
|
|
seq_printf(s, "IE:\t\t0x%08x\n",
|
|
OMAP_HSMMC_READ(host->base, IE));
|
|
seq_printf(s, "ISE:\t\t0x%08x\n",
|
|
OMAP_HSMMC_READ(host->base, ISE));
|
|
seq_printf(s, "CAPA:\t\t0x%08x\n",
|
|
OMAP_HSMMC_READ(host->base, CAPA));
|
|
|
|
clk_disable(host->fclk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_hsmmc_regs_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, omap_hsmmc_regs_show, inode->i_private);
|
|
}
|
|
|
|
static const struct file_operations mmc_regs_fops = {
|
|
.open = omap_hsmmc_regs_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
static void omap_hsmmc_debugfs(struct mmc_host *mmc)
|
|
{
|
|
if (mmc->debugfs_root)
|
|
debugfs_create_file("regs", S_IRUSR, mmc->debugfs_root,
|
|
mmc, &mmc_regs_fops);
|
|
}
|
|
|
|
#else
|
|
|
|
static void omap_hsmmc_debugfs(struct mmc_host *mmc)
|
|
{
|
|
}
|
|
|
|
#endif
|
|
|
|
static int __init omap_hsmmc_probe(struct platform_device *pdev)
|
|
{
|
|
struct omap_mmc_platform_data *pdata = pdev->dev.platform_data;
|
|
struct mmc_host *mmc;
|
|
struct omap_hsmmc_host *host = NULL;
|
|
struct resource *res;
|
|
int ret, irq;
|
|
|
|
if (pdata == NULL) {
|
|
dev_err(&pdev->dev, "Platform Data is missing\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
if (pdata->nr_slots == 0) {
|
|
dev_err(&pdev->dev, "No Slots\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (res == NULL || irq < 0)
|
|
return -ENXIO;
|
|
|
|
res->start += pdata->reg_offset;
|
|
res->end += pdata->reg_offset;
|
|
res = request_mem_region(res->start, resource_size(res), pdev->name);
|
|
if (res == NULL)
|
|
return -EBUSY;
|
|
|
|
ret = omap_hsmmc_gpio_init(pdata);
|
|
if (ret)
|
|
goto err;
|
|
|
|
mmc = mmc_alloc_host(sizeof(struct omap_hsmmc_host), &pdev->dev);
|
|
if (!mmc) {
|
|
ret = -ENOMEM;
|
|
goto err_alloc;
|
|
}
|
|
|
|
host = mmc_priv(mmc);
|
|
host->mmc = mmc;
|
|
host->pdata = pdata;
|
|
host->dev = &pdev->dev;
|
|
host->use_dma = 1;
|
|
host->dev->dma_mask = &pdata->dma_mask;
|
|
host->dma_ch = -1;
|
|
host->irq = irq;
|
|
host->id = pdev->id;
|
|
host->slot_id = 0;
|
|
host->mapbase = res->start;
|
|
host->base = ioremap(host->mapbase, SZ_4K);
|
|
host->power_mode = MMC_POWER_OFF;
|
|
|
|
platform_set_drvdata(pdev, host);
|
|
INIT_WORK(&host->mmc_carddetect_work, omap_hsmmc_detect);
|
|
|
|
if (mmc_slot(host).power_saving)
|
|
mmc->ops = &omap_hsmmc_ps_ops;
|
|
else
|
|
mmc->ops = &omap_hsmmc_ops;
|
|
|
|
/*
|
|
* If regulator_disable can only put vcc_aux to sleep then there is
|
|
* no off state.
|
|
*/
|
|
if (mmc_slot(host).vcc_aux_disable_is_sleep)
|
|
mmc_slot(host).no_off = 1;
|
|
|
|
mmc->f_min = 400000;
|
|
mmc->f_max = 52000000;
|
|
|
|
spin_lock_init(&host->irq_lock);
|
|
|
|
host->iclk = clk_get(&pdev->dev, "ick");
|
|
if (IS_ERR(host->iclk)) {
|
|
ret = PTR_ERR(host->iclk);
|
|
host->iclk = NULL;
|
|
goto err1;
|
|
}
|
|
host->fclk = clk_get(&pdev->dev, "fck");
|
|
if (IS_ERR(host->fclk)) {
|
|
ret = PTR_ERR(host->fclk);
|
|
host->fclk = NULL;
|
|
clk_put(host->iclk);
|
|
goto err1;
|
|
}
|
|
|
|
omap_hsmmc_context_save(host);
|
|
|
|
mmc->caps |= MMC_CAP_DISABLE;
|
|
mmc_set_disable_delay(mmc, OMAP_MMC_DISABLED_TIMEOUT);
|
|
/* we start off in DISABLED state */
|
|
host->dpm_state = DISABLED;
|
|
|
|
if (clk_enable(host->iclk) != 0) {
|
|
clk_put(host->iclk);
|
|
clk_put(host->fclk);
|
|
goto err1;
|
|
}
|
|
|
|
if (mmc_host_enable(host->mmc) != 0) {
|
|
clk_disable(host->iclk);
|
|
clk_put(host->iclk);
|
|
clk_put(host->fclk);
|
|
goto err1;
|
|
}
|
|
|
|
if (cpu_is_omap2430()) {
|
|
host->dbclk = clk_get(&pdev->dev, "mmchsdb_fck");
|
|
/*
|
|
* MMC can still work without debounce clock.
|
|
*/
|
|
if (IS_ERR(host->dbclk))
|
|
dev_warn(mmc_dev(host->mmc),
|
|
"Failed to get debounce clock\n");
|
|
else
|
|
host->got_dbclk = 1;
|
|
|
|
if (host->got_dbclk)
|
|
if (clk_enable(host->dbclk) != 0)
|
|
dev_dbg(mmc_dev(host->mmc), "Enabling debounce"
|
|
" clk failed\n");
|
|
}
|
|
|
|
/* Since we do only SG emulation, we can have as many segs
|
|
* as we want. */
|
|
mmc->max_segs = 1024;
|
|
|
|
mmc->max_blk_size = 512; /* Block Length at max can be 1024 */
|
|
mmc->max_blk_count = 0xFFFF; /* No. of Blocks is 16 bits */
|
|
mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
|
|
mmc->max_seg_size = mmc->max_req_size;
|
|
|
|
mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
|
|
MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_ERASE;
|
|
|
|
mmc->caps |= mmc_slot(host).caps;
|
|
if (mmc->caps & MMC_CAP_8_BIT_DATA)
|
|
mmc->caps |= MMC_CAP_4_BIT_DATA;
|
|
|
|
if (mmc_slot(host).nonremovable)
|
|
mmc->caps |= MMC_CAP_NONREMOVABLE;
|
|
|
|
omap_hsmmc_conf_bus_power(host);
|
|
|
|
/* Select DMA lines */
|
|
switch (host->id) {
|
|
case OMAP_MMC1_DEVID:
|
|
host->dma_line_tx = OMAP24XX_DMA_MMC1_TX;
|
|
host->dma_line_rx = OMAP24XX_DMA_MMC1_RX;
|
|
break;
|
|
case OMAP_MMC2_DEVID:
|
|
host->dma_line_tx = OMAP24XX_DMA_MMC2_TX;
|
|
host->dma_line_rx = OMAP24XX_DMA_MMC2_RX;
|
|
break;
|
|
case OMAP_MMC3_DEVID:
|
|
host->dma_line_tx = OMAP34XX_DMA_MMC3_TX;
|
|
host->dma_line_rx = OMAP34XX_DMA_MMC3_RX;
|
|
break;
|
|
case OMAP_MMC4_DEVID:
|
|
host->dma_line_tx = OMAP44XX_DMA_MMC4_TX;
|
|
host->dma_line_rx = OMAP44XX_DMA_MMC4_RX;
|
|
break;
|
|
case OMAP_MMC5_DEVID:
|
|
host->dma_line_tx = OMAP44XX_DMA_MMC5_TX;
|
|
host->dma_line_rx = OMAP44XX_DMA_MMC5_RX;
|
|
break;
|
|
default:
|
|
dev_err(mmc_dev(host->mmc), "Invalid MMC id\n");
|
|
goto err_irq;
|
|
}
|
|
|
|
/* Request IRQ for MMC operations */
|
|
ret = request_irq(host->irq, omap_hsmmc_irq, IRQF_DISABLED,
|
|
mmc_hostname(mmc), host);
|
|
if (ret) {
|
|
dev_dbg(mmc_dev(host->mmc), "Unable to grab HSMMC IRQ\n");
|
|
goto err_irq;
|
|
}
|
|
|
|
if (pdata->init != NULL) {
|
|
if (pdata->init(&pdev->dev) != 0) {
|
|
dev_dbg(mmc_dev(host->mmc),
|
|
"Unable to configure MMC IRQs\n");
|
|
goto err_irq_cd_init;
|
|
}
|
|
}
|
|
|
|
if (omap_hsmmc_have_reg() && !mmc_slot(host).set_power) {
|
|
ret = omap_hsmmc_reg_get(host);
|
|
if (ret)
|
|
goto err_reg;
|
|
host->use_reg = 1;
|
|
}
|
|
|
|
mmc->ocr_avail = mmc_slot(host).ocr_mask;
|
|
|
|
/* Request IRQ for card detect */
|
|
if ((mmc_slot(host).card_detect_irq)) {
|
|
ret = request_irq(mmc_slot(host).card_detect_irq,
|
|
omap_hsmmc_cd_handler,
|
|
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING
|
|
| IRQF_DISABLED,
|
|
mmc_hostname(mmc), host);
|
|
if (ret) {
|
|
dev_dbg(mmc_dev(host->mmc),
|
|
"Unable to grab MMC CD IRQ\n");
|
|
goto err_irq_cd;
|
|
}
|
|
pdata->suspend = omap_hsmmc_suspend_cdirq;
|
|
pdata->resume = omap_hsmmc_resume_cdirq;
|
|
}
|
|
|
|
omap_hsmmc_disable_irq(host);
|
|
|
|
mmc_host_lazy_disable(host->mmc);
|
|
|
|
omap_hsmmc_protect_card(host);
|
|
|
|
mmc_add_host(mmc);
|
|
|
|
if (mmc_slot(host).name != NULL) {
|
|
ret = device_create_file(&mmc->class_dev, &dev_attr_slot_name);
|
|
if (ret < 0)
|
|
goto err_slot_name;
|
|
}
|
|
if (mmc_slot(host).card_detect_irq && mmc_slot(host).get_cover_state) {
|
|
ret = device_create_file(&mmc->class_dev,
|
|
&dev_attr_cover_switch);
|
|
if (ret < 0)
|
|
goto err_slot_name;
|
|
}
|
|
|
|
omap_hsmmc_debugfs(mmc);
|
|
|
|
return 0;
|
|
|
|
err_slot_name:
|
|
mmc_remove_host(mmc);
|
|
free_irq(mmc_slot(host).card_detect_irq, host);
|
|
err_irq_cd:
|
|
if (host->use_reg)
|
|
omap_hsmmc_reg_put(host);
|
|
err_reg:
|
|
if (host->pdata->cleanup)
|
|
host->pdata->cleanup(&pdev->dev);
|
|
err_irq_cd_init:
|
|
free_irq(host->irq, host);
|
|
err_irq:
|
|
mmc_host_disable(host->mmc);
|
|
clk_disable(host->iclk);
|
|
clk_put(host->fclk);
|
|
clk_put(host->iclk);
|
|
if (host->got_dbclk) {
|
|
clk_disable(host->dbclk);
|
|
clk_put(host->dbclk);
|
|
}
|
|
err1:
|
|
iounmap(host->base);
|
|
platform_set_drvdata(pdev, NULL);
|
|
mmc_free_host(mmc);
|
|
err_alloc:
|
|
omap_hsmmc_gpio_free(pdata);
|
|
err:
|
|
release_mem_region(res->start, resource_size(res));
|
|
return ret;
|
|
}
|
|
|
|
static int omap_hsmmc_remove(struct platform_device *pdev)
|
|
{
|
|
struct omap_hsmmc_host *host = platform_get_drvdata(pdev);
|
|
struct resource *res;
|
|
|
|
if (host) {
|
|
mmc_host_enable(host->mmc);
|
|
mmc_remove_host(host->mmc);
|
|
if (host->use_reg)
|
|
omap_hsmmc_reg_put(host);
|
|
if (host->pdata->cleanup)
|
|
host->pdata->cleanup(&pdev->dev);
|
|
free_irq(host->irq, host);
|
|
if (mmc_slot(host).card_detect_irq)
|
|
free_irq(mmc_slot(host).card_detect_irq, host);
|
|
flush_work_sync(&host->mmc_carddetect_work);
|
|
|
|
mmc_host_disable(host->mmc);
|
|
clk_disable(host->iclk);
|
|
clk_put(host->fclk);
|
|
clk_put(host->iclk);
|
|
if (host->got_dbclk) {
|
|
clk_disable(host->dbclk);
|
|
clk_put(host->dbclk);
|
|
}
|
|
|
|
mmc_free_host(host->mmc);
|
|
iounmap(host->base);
|
|
omap_hsmmc_gpio_free(pdev->dev.platform_data);
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (res)
|
|
release_mem_region(res->start, resource_size(res));
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int omap_hsmmc_suspend(struct device *dev)
|
|
{
|
|
int ret = 0;
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct omap_hsmmc_host *host = platform_get_drvdata(pdev);
|
|
|
|
if (host && host->suspended)
|
|
return 0;
|
|
|
|
if (host) {
|
|
host->suspended = 1;
|
|
if (host->pdata->suspend) {
|
|
ret = host->pdata->suspend(&pdev->dev,
|
|
host->slot_id);
|
|
if (ret) {
|
|
dev_dbg(mmc_dev(host->mmc),
|
|
"Unable to handle MMC board"
|
|
" level suspend\n");
|
|
host->suspended = 0;
|
|
return ret;
|
|
}
|
|
}
|
|
cancel_work_sync(&host->mmc_carddetect_work);
|
|
ret = mmc_suspend_host(host->mmc);
|
|
mmc_host_enable(host->mmc);
|
|
if (ret == 0) {
|
|
omap_hsmmc_disable_irq(host);
|
|
OMAP_HSMMC_WRITE(host->base, HCTL,
|
|
OMAP_HSMMC_READ(host->base, HCTL) & ~SDBP);
|
|
mmc_host_disable(host->mmc);
|
|
clk_disable(host->iclk);
|
|
if (host->got_dbclk)
|
|
clk_disable(host->dbclk);
|
|
} else {
|
|
host->suspended = 0;
|
|
if (host->pdata->resume) {
|
|
ret = host->pdata->resume(&pdev->dev,
|
|
host->slot_id);
|
|
if (ret)
|
|
dev_dbg(mmc_dev(host->mmc),
|
|
"Unmask interrupt failed\n");
|
|
}
|
|
mmc_host_disable(host->mmc);
|
|
}
|
|
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/* Routine to resume the MMC device */
|
|
static int omap_hsmmc_resume(struct device *dev)
|
|
{
|
|
int ret = 0;
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct omap_hsmmc_host *host = platform_get_drvdata(pdev);
|
|
|
|
if (host && !host->suspended)
|
|
return 0;
|
|
|
|
if (host) {
|
|
ret = clk_enable(host->iclk);
|
|
if (ret)
|
|
goto clk_en_err;
|
|
|
|
if (mmc_host_enable(host->mmc) != 0) {
|
|
clk_disable(host->iclk);
|
|
goto clk_en_err;
|
|
}
|
|
|
|
if (host->got_dbclk)
|
|
clk_enable(host->dbclk);
|
|
|
|
omap_hsmmc_conf_bus_power(host);
|
|
|
|
if (host->pdata->resume) {
|
|
ret = host->pdata->resume(&pdev->dev, host->slot_id);
|
|
if (ret)
|
|
dev_dbg(mmc_dev(host->mmc),
|
|
"Unmask interrupt failed\n");
|
|
}
|
|
|
|
omap_hsmmc_protect_card(host);
|
|
|
|
/* Notify the core to resume the host */
|
|
ret = mmc_resume_host(host->mmc);
|
|
if (ret == 0)
|
|
host->suspended = 0;
|
|
|
|
mmc_host_lazy_disable(host->mmc);
|
|
}
|
|
|
|
return ret;
|
|
|
|
clk_en_err:
|
|
dev_dbg(mmc_dev(host->mmc),
|
|
"Failed to enable MMC clocks during resume\n");
|
|
return ret;
|
|
}
|
|
|
|
#else
|
|
#define omap_hsmmc_suspend NULL
|
|
#define omap_hsmmc_resume NULL
|
|
#endif
|
|
|
|
static struct dev_pm_ops omap_hsmmc_dev_pm_ops = {
|
|
.suspend = omap_hsmmc_suspend,
|
|
.resume = omap_hsmmc_resume,
|
|
};
|
|
|
|
static struct platform_driver omap_hsmmc_driver = {
|
|
.remove = omap_hsmmc_remove,
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.owner = THIS_MODULE,
|
|
.pm = &omap_hsmmc_dev_pm_ops,
|
|
},
|
|
};
|
|
|
|
static int __init omap_hsmmc_init(void)
|
|
{
|
|
/* Register the MMC driver */
|
|
return platform_driver_probe(&omap_hsmmc_driver, omap_hsmmc_probe);
|
|
}
|
|
|
|
static void __exit omap_hsmmc_cleanup(void)
|
|
{
|
|
/* Unregister MMC driver */
|
|
platform_driver_unregister(&omap_hsmmc_driver);
|
|
}
|
|
|
|
module_init(omap_hsmmc_init);
|
|
module_exit(omap_hsmmc_cleanup);
|
|
|
|
MODULE_DESCRIPTION("OMAP High Speed Multimedia Card driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:" DRIVER_NAME);
|
|
MODULE_AUTHOR("Texas Instruments Inc");
|