15b2703e5e
The BPA-RS600 is a compact 600W AC to DC removable power supply module. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210317040231.21490-3-chris.packham@alliedtelesis.co.nz [groeck: Added bpa-rs600 to index.rst] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
75 lines
1.9 KiB
ReStructuredText
75 lines
1.9 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0
|
|
|
|
Kernel driver bpa-rs600
|
|
=======================
|
|
|
|
Supported chips:
|
|
|
|
* BPA-RS600-120
|
|
|
|
Datasheet: Publicly available at the BluTek website
|
|
http://blutekpower.com/wp-content/uploads/2019/01/BPA-RS600-120-07-19-2018.pdf
|
|
|
|
Authors:
|
|
- Chris Packham <chris.packham@alliedtelesis.co.nz>
|
|
|
|
Description
|
|
-----------
|
|
|
|
The BPA-RS600 is a compact 600W removable power supply module.
|
|
|
|
Usage Notes
|
|
-----------
|
|
|
|
This driver does not probe for PMBus devices. You will have to instantiate
|
|
devices explicitly.
|
|
|
|
Sysfs attributes
|
|
----------------
|
|
|
|
======================= ============================================
|
|
curr1_label "iin"
|
|
curr1_input Measured input current
|
|
curr1_max Maximum input current
|
|
curr1_max_alarm Input current high alarm
|
|
|
|
curr2_label "iout1"
|
|
curr2_input Measured output current
|
|
curr2_max Maximum output current
|
|
curr2_max_alarm Output current high alarm
|
|
|
|
fan1_input Measured fan speed
|
|
fan1_alarm Fan warning
|
|
fan1_fault Fan fault
|
|
|
|
in1_label "vin"
|
|
in1_input Measured input voltage
|
|
in1_max Maximum input voltage
|
|
in1_max_alarm Input voltage high alarm
|
|
in1_min Minimum input voltage
|
|
in1_min_alarm Input voltage low alarm
|
|
|
|
in2_label "vout1"
|
|
in2_input Measured output voltage
|
|
in2_max Maximum output voltage
|
|
in2_max_alarm Output voltage high alarm
|
|
in2_min Maximum output voltage
|
|
in2_min_alarm Output voltage low alarm
|
|
|
|
power1_label "pin"
|
|
power1_input Measured input power
|
|
power1_alarm Input power alarm
|
|
power1_max Maximum input power
|
|
|
|
power2_label "pout1"
|
|
power2_input Measured output power
|
|
power2_max Maximum output power
|
|
power2_max_alarm Output power high alarm
|
|
|
|
temp1_input Measured temperature around input connector
|
|
temp1_alarm Temperature alarm
|
|
|
|
temp2_input Measured temperature around output connector
|
|
temp2_alarm Temperature alarm
|
|
======================= ============================================
|