Rafael Ignacio Zurita 9dcaa7b25f ALSA: sh: add SuperH DAC audio driver for ALSA V4 ... This is a port of the sound/oss/sh_dac_audio.c driver. The driver uses an on-chip 8-bit D/A converter, which has a speaker connected to one of its channels, found in several ancient HP machines. For interrupts it uses a high-resolution timer (hrtimer). Tested on SH7709 based hp6xx (HP Jornada 680/690 and HP Palmtop 620lx/660lx). Also, since OSS Emulation works, the old OSS sound/oss/sh_dac_audio.c driver would be obsolete soon, and it could be removed. Signed-off-by: Rafael Ignacio Zurita <rizurita@yahoo.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>		2009-11-04 09:17:40 +01:00
..
mach-cayman	sh: Move out cayman-specific panic handler code to its own file.	2009-05-08 17:41:59 +09:00
mach-dreamcast	sh: add init member to pci_channel data	2009-04-16 16:00:12 +09:00
mach-ecovec24	sh: mach-ecovec24: Add active low setting for sh_eth	2009-09-24 16:21:51 +09:00
mach-edosk7705	sh: mach-edosk7705: Fix up edosk7705 so it all builds again.	2008-12-22 18:44:45 +09:00
mach-highlander	usb: m66592-udc platform data on_chip support	2009-07-23 13:04:15 +09:00
mach-hp6xx	ALSA: sh: add SuperH DAC audio driver for ALSA V4	2009-11-04 09:17:40 +01:00
mach-kfr2r09	video: sh_mobile_lcdcfb: use both register sets for display panning	2009-09-15 21:08:22 +09:00
mach-landisk
mach-lboxre2	sh: Migrate common board headers to mach-common/.	2008-10-20 13:02:48 +09:00
mach-microdev	sh: mach-microdev: Split out the fdc37c93xapm initialization code.	2008-12-22 18:44:45 +09:00
mach-migor	video: sh_mobile_lcdcfb: use both register sets for display panning	2009-09-15 21:08:22 +09:00
mach-r2d	sh: mach-r2d: add physmap-flash support for R2D+ boards.	2009-04-27 17:54:41 +09:00
mach-rsk	sh: smsc911x support for the rsk7203 board	2009-06-16 05:57:07 +09:00
mach-sdk7780	sh: Migrate common board headers to mach-common/.	2008-10-20 13:02:48 +09:00
mach-se	sh: add FSI driver support for ms7724se	2009-09-25 11:04:36 +09:00
mach-sh03	sh: mach-sh03: Give the sh03 rtc its own spinlock.	2009-05-08 16:57:35 +09:00
mach-sh7763rdp	sh: sh7763rdp: Change IRQ number for sh_eth of sh7763rdp	2009-03-17 15:20:59 +09:00
mach-snapgear	sh: pci: Kill off dead references to is_pci_ioaddr and friends.	2009-04-20 19:39:57 +09:00
mach-systemh	sh: pci: Kill off dead references to is_pci_ioaddr and friends.	2009-04-20 19:39:57 +09:00
mach-titan	sh: pci: Kill off dead references to is_pci_ioaddr and friends.	2009-04-20 19:39:57 +09:00
mach-x3proto	usb: m66592-udc platform data on_chip support	2009-07-23 13:04:15 +09:00
board-ap325rxa.c	V4L/DVB (12509): sh: prepare board-ap325rxa.c for v4l2-subdev conversion	2009-09-19 00:18:33 -03:00
board-edosk7760.c	sh: edosk7760: Correct size of bootloader flash partition.	2008-09-21 10:32:29 +09:00
board-espt.c	sh: espt-giga board support	2009-03-17 15:18:52 +09:00
board-magicpanelr2.c	sh: convert magicpanelr2 platform to use smsc911x.	2009-01-21 17:42:25 +09:00
board-polaris.c	sh: add support for SMSC Polaris platform	2009-03-21 01:26:33 +09:00
board-sh7785lcr.c	sh: Fix up build warning for SH7785LCR proto board.	2009-09-01 22:38:27 +09:00
board-shmin.c	sh: board-shmin: Convert shmin to use __set_io_port_base().	2008-12-22 18:44:45 +09:00
board-urquell.c	sh: urquell: Add system FPGA mode pin support.	2009-06-15 19:02:37 +09:00
Kconfig	sh: disable trapped I/O on SH7785LCR.	2009-09-01 22:37:10 +09:00
Makefile	sh: add support for SMSC Polaris platform	2009-03-21 01:26:33 +09:00