kevin/linux
1
Fork 0
Code
1da177e4c3
linux/arch/s390/kernel/entry64.S
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2 
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

882 lines
28 KiB
ArmAsm
Raw Blame History

/*
* arch/s390/kernel/entry.S
* S390 low-level entry points.
*
* S390 version
* Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
* Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
* Hartmut Penner (hp@de.ibm.com),
* Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
*/
#include <linux/sys.h>
#include <linux/linkage.h>
#include <linux/config.h>
#include <asm/cache.h>
#include <asm/lowcore.h>
#include <asm/errno.h>
#include <asm/ptrace.h>
#include <asm/thread_info.h>
#include <asm/offsets.h>
#include <asm/unistd.h>
#include <asm/page.h>
/*
* Stack layout for the system_call stack entry.
* The first few entries are identical to the user_regs_struct.
*/
SP_PTREGS = STACK_FRAME_OVERHEAD
SP_ARGS = STACK_FRAME_OVERHEAD + __PT_ARGS
SP_PSW = STACK_FRAME_OVERHEAD + __PT_PSW
SP_R0 = STACK_FRAME_OVERHEAD + __PT_GPRS
SP_R1 = STACK_FRAME_OVERHEAD + __PT_GPRS + 8
SP_R2 = STACK_FRAME_OVERHEAD + __PT_GPRS + 16
SP_R3 = STACK_FRAME_OVERHEAD + __PT_GPRS + 24
SP_R4 = STACK_FRAME_OVERHEAD + __PT_GPRS + 32
SP_R5 = STACK_FRAME_OVERHEAD + __PT_GPRS + 40
SP_R6 = STACK_FRAME_OVERHEAD + __PT_GPRS + 48
SP_R7 = STACK_FRAME_OVERHEAD + __PT_GPRS + 56
SP_R8 = STACK_FRAME_OVERHEAD + __PT_GPRS + 64
SP_R9 = STACK_FRAME_OVERHEAD + __PT_GPRS + 72
SP_R10 = STACK_FRAME_OVERHEAD + __PT_GPRS + 80
SP_R11 = STACK_FRAME_OVERHEAD + __PT_GPRS + 88
SP_R12 = STACK_FRAME_OVERHEAD + __PT_GPRS + 96
SP_R13 = STACK_FRAME_OVERHEAD + __PT_GPRS + 104
SP_R14 = STACK_FRAME_OVERHEAD + __PT_GPRS + 112
SP_R15 = STACK_FRAME_OVERHEAD + __PT_GPRS + 120
SP_ORIG_R2 = STACK_FRAME_OVERHEAD + __PT_ORIG_GPR2
SP_ILC = STACK_FRAME_OVERHEAD + __PT_ILC
SP_TRAP = STACK_FRAME_OVERHEAD + __PT_TRAP
SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE
STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER
STACK_SIZE = 1 << STACK_SHIFT
_TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
_TIF_RESTART_SVC | _TIF_SINGLE_STEP )
_TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NEED_RESCHED)
#define BASED(name) name-system_call(%r13)
.macro STORE_TIMER lc_offset
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
stpt \lc_offset
#endif
.endm
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
.macro UPDATE_VTIME lc_from,lc_to,lc_sum
lg %r10,\lc_from
slg %r10,\lc_to
alg %r10,\lc_sum
stg %r10,\lc_sum
.endm
#endif
/*
* Register usage in interrupt handlers:
* R9 - pointer to current task structure
* R13 - pointer to literal pool
* R14 - return register for function calls
* R15 - kernel stack pointer
*/
.macro SAVE_ALL_BASE savearea
stmg %r12,%r15,\savearea
larl %r13,system_call
.endm
.macro SAVE_ALL psworg,savearea,sync
la %r12,\psworg
.if \sync
tm \psworg+1,0x01 # test problem state bit
jz 2f # skip stack setup save
lg %r15,__LC_KERNEL_STACK # problem state -> load ksp
.else
tm \psworg+1,0x01 # test problem state bit
jnz 1f # from user -> load kernel stack
clc \psworg+8(8),BASED(.Lcritical_end)
jhe 0f
clc \psworg+8(8),BASED(.Lcritical_start)
jl 0f
brasl %r14,cleanup_critical
tm 0(%r12),0x01 # retest problem state after cleanup
jnz 1f
0: lg %r14,__LC_ASYNC_STACK # are we already on the async. stack ?
slgr %r14,%r15
srag %r14,%r14,STACK_SHIFT
jz 2f
1: lg %r15,__LC_ASYNC_STACK # load async stack
.endif
#ifdef CONFIG_CHECK_STACK
j 3f
2: tml %r15,STACK_SIZE - CONFIG_STACK_GUARD
jz stack_overflow
3:
#endif
2: aghi %r15,-SP_SIZE # make room for registers & psw
mvc SP_PSW(16,%r15),0(%r12) # move user PSW to stack
la %r12,\psworg
stg %r2,SP_ORIG_R2(%r15) # store original content of gpr 2
icm %r12,12,__LC_SVC_ILC
stmg %r0,%r11,SP_R0(%r15) # store gprs %r0-%r11 to kernel stack
st %r12,SP_ILC(%r15)
mvc SP_R12(32,%r15),\savearea # move %r12-%r15 to stack
la %r12,0
stg %r12,__SF_BACKCHAIN(%r15)
.endm
.macro RESTORE_ALL sync
mvc __LC_RETURN_PSW(16),SP_PSW(%r15) # move user PSW to lowcore
.if !\sync
ni __LC_RETURN_PSW+1,0xfd # clear wait state bit
.endif
lmg %r0,%r15,SP_R0(%r15) # load gprs 0-15 of user
STORE_TIMER __LC_EXIT_TIMER
lpswe __LC_RETURN_PSW # back to caller
.endm
/*
* Scheduler resume function, called by switch_to
* gpr2 = (task_struct *) prev
* gpr3 = (task_struct *) next
* Returns:
* gpr2 = prev
*/
.globl __switch_to
__switch_to:
tm __THREAD_per+4(%r3),0xe8 # is the new process using per ?
jz __switch_to_noper # if not we're fine
stctg %c9,%c11,__SF_EMPTY(%r15)# We are using per stuff
clc __THREAD_per(24,%r3),__SF_EMPTY(%r15)
je __switch_to_noper # we got away without bashing TLB's
lctlg %c9,%c11,__THREAD_per(%r3) # Nope we didn't
__switch_to_noper:
stmg %r6,%r15,__SF_GPRS(%r15)# store __switch_to registers of prev task
stg %r15,__THREAD_ksp(%r2) # store kernel stack to prev->tss.ksp
lg %r15,__THREAD_ksp(%r3) # load kernel stack from next->tss.ksp
lmg %r6,%r15,__SF_GPRS(%r15)# load __switch_to registers of next task
stg %r3,__LC_CURRENT # __LC_CURRENT = current task struct
lctl %c4,%c4,__TASK_pid(%r3) # load pid to control reg. 4
lg %r3,__THREAD_info(%r3) # load thread_info from task struct
stg %r3,__LC_THREAD_INFO
aghi %r3,STACK_SIZE
stg %r3,__LC_KERNEL_STACK # __LC_KERNEL_STACK = new kernel stack
br %r14
__critical_start:
/*
* SVC interrupt handler routine. System calls are synchronous events and
* are executed with interrupts enabled.
*/
.globl system_call
system_call:
STORE_TIMER __LC_SYNC_ENTER_TIMER
sysc_saveall:
SAVE_ALL_BASE __LC_SAVE_AREA
SAVE_ALL __LC_SVC_OLD_PSW,__LC_SAVE_AREA,1
llgh %r7,__LC_SVC_INT_CODE # get svc number from lowcore
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
sysc_vtime:
tm SP_PSW+1(%r15),0x01 # interrupting from user ?
jz sysc_do_svc
UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER
sysc_stime:
UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
sysc_update:
mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
#endif
sysc_do_svc:
lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct
slag %r7,%r7,2 # *4 and test for svc 0
jnz sysc_nr_ok
# svc 0: system call number in %r1
cl %r1,BASED(.Lnr_syscalls)
jnl sysc_nr_ok
lgfr %r7,%r1 # clear high word in r1
slag %r7,%r7,2 # svc 0: system call number in %r1
sysc_nr_ok:
mvc SP_ARGS(8,%r15),SP_R7(%r15)
sysc_do_restart:
larl %r10,sys_call_table
#ifdef CONFIG_S390_SUPPORT
tm SP_PSW+3(%r15),0x01 # are we running in 31 bit mode ?
jo sysc_noemu
larl %r10,sys_call_table_emu # use 31 bit emulation system calls
sysc_noemu:
#endif
tm __TI_flags+7(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
lgf %r8,0(%r7,%r10) # load address of system call routine
jnz sysc_tracesys
basr %r14,%r8 # call sys_xxxx
stg %r2,SP_R2(%r15) # store return value (change R2 on stack)
# ATTENTION: check sys_execve_glue before
# changing anything here !!
sysc_return:
tm SP_PSW+1(%r15),0x01 # returning to user ?
jno sysc_leave
tm __TI_flags+7(%r9),_TIF_WORK_SVC
jnz sysc_work # there is work to do (signals etc.)
sysc_leave:
RESTORE_ALL 1
#
# recheck if there is more work to do
#
sysc_work_loop:
tm __TI_flags+7(%r9),_TIF_WORK_SVC
jz sysc_leave # there is no work to do
#
# One of the work bits is on. Find out which one.
#
sysc_work:
tm __TI_flags+7(%r9),_TIF_NEED_RESCHED
jo sysc_reschedule
tm __TI_flags+7(%r9),_TIF_SIGPENDING
jo sysc_sigpending
tm __TI_flags+7(%r9),_TIF_RESTART_SVC
jo sysc_restart
tm __TI_flags+7(%r9),_TIF_SINGLE_STEP
jo sysc_singlestep
j sysc_leave
#
# _TIF_NEED_RESCHED is set, call schedule
#
sysc_reschedule:
larl %r14,sysc_work_loop
jg schedule # return point is sysc_return
#
# _TIF_SIGPENDING is set, call do_signal
#
sysc_sigpending:
ni __TI_flags+7(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP
la %r2,SP_PTREGS(%r15) # load pt_regs
sgr %r3,%r3 # clear *oldset
brasl %r14,do_signal # call do_signal
tm __TI_flags+7(%r9),_TIF_RESTART_SVC
jo sysc_restart
tm __TI_flags+7(%r9),_TIF_SINGLE_STEP
jo sysc_singlestep
j sysc_leave # out of here, do NOT recheck
#
# _TIF_RESTART_SVC is set, set up registers and restart svc
#
sysc_restart:
ni __TI_flags+7(%r9),255-_TIF_RESTART_SVC # clear TIF_RESTART_SVC
lg %r7,SP_R2(%r15) # load new svc number
slag %r7,%r7,2 # *4
mvc SP_R2(8,%r15),SP_ORIG_R2(%r15) # restore first argument
lmg %r2,%r6,SP_R2(%r15) # load svc arguments
j sysc_do_restart # restart svc
#
# _TIF_SINGLE_STEP is set, call do_single_step
#
sysc_singlestep:
ni __TI_flags+7(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP
lhi %r0,__LC_PGM_OLD_PSW
sth %r0,SP_TRAP(%r15) # set trap indication to pgm check
la %r2,SP_PTREGS(%r15) # address of register-save area
larl %r14,sysc_return # load adr. of system return
jg do_single_step # branch to do_sigtrap
__critical_end:
#
# call syscall_trace before and after system call
# special linkage: %r12 contains the return address for trace_svc
#
sysc_tracesys:
la %r2,SP_PTREGS(%r15) # load pt_regs
la %r3,0
srl %r7,2
stg %r7,SP_R2(%r15)
brasl %r14,syscall_trace
lghi %r0,NR_syscalls
clg %r0,SP_R2(%r15)
jnh sysc_tracenogo
lg %r7,SP_R2(%r15) # strace might have changed the
sll %r7,2 # system call
lgf %r8,0(%r7,%r10)
sysc_tracego:
lmg %r3,%r6,SP_R3(%r15)
lg %r2,SP_ORIG_R2(%r15)
basr %r14,%r8 # call sys_xxx
stg %r2,SP_R2(%r15) # store return value
sysc_tracenogo:
tm __TI_flags+7(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
jz sysc_return
la %r2,SP_PTREGS(%r15) # load pt_regs
la %r3,1
larl %r14,sysc_return # return point is sysc_return
jg syscall_trace
#
# a new process exits the kernel with ret_from_fork
#
.globl ret_from_fork
ret_from_fork:
lg %r13,__LC_SVC_NEW_PSW+8
lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct
tm SP_PSW+1(%r15),0x01 # forking a kernel thread ?
jo 0f
stg %r15,SP_R15(%r15) # store stack pointer for new kthread
0: brasl %r14,schedule_tail
stosm 24(%r15),0x03 # reenable interrupts
j sysc_return
#
# clone, fork, vfork, exec and sigreturn need glue,
# because they all expect pt_regs as parameter,
# but are called with different parameter.
# return-address is set up above
#
sys_clone_glue:
la %r2,SP_PTREGS(%r15) # load pt_regs
jg sys_clone # branch to sys_clone
#ifdef CONFIG_S390_SUPPORT
sys32_clone_glue:
la %r2,SP_PTREGS(%r15) # load pt_regs
jg sys32_clone # branch to sys32_clone
#endif
sys_fork_glue:
la %r2,SP_PTREGS(%r15) # load pt_regs
jg sys_fork # branch to sys_fork
sys_vfork_glue:
la %r2,SP_PTREGS(%r15) # load pt_regs
jg sys_vfork # branch to sys_vfork
sys_execve_glue:
la %r2,SP_PTREGS(%r15) # load pt_regs
lgr %r12,%r14 # save return address
brasl %r14,sys_execve # call sys_execve
ltgr %r2,%r2 # check if execve failed
bnz 0(%r12) # it did fail -> store result in gpr2
b 6(%r12) # SKIP STG 2,SP_R2(15) in
# system_call/sysc_tracesys
#ifdef CONFIG_S390_SUPPORT
sys32_execve_glue:
la %r2,SP_PTREGS(%r15) # load pt_regs
lgr %r12,%r14 # save return address
brasl %r14,sys32_execve # call sys32_execve
ltgr %r2,%r2 # check if execve failed
bnz 0(%r12) # it did fail -> store result in gpr2
b 6(%r12) # SKIP STG 2,SP_R2(15) in
# system_call/sysc_tracesys
#endif
sys_sigreturn_glue:
la %r2,SP_PTREGS(%r15) # load pt_regs as parameter
jg sys_sigreturn # branch to sys_sigreturn
#ifdef CONFIG_S390_SUPPORT
sys32_sigreturn_glue:
la %r2,SP_PTREGS(%r15) # load pt_regs as parameter
jg sys32_sigreturn # branch to sys32_sigreturn
#endif
sys_rt_sigreturn_glue:
la %r2,SP_PTREGS(%r15) # load pt_regs as parameter
jg sys_rt_sigreturn # branch to sys_sigreturn
#ifdef CONFIG_S390_SUPPORT
sys32_rt_sigreturn_glue:
la %r2,SP_PTREGS(%r15) # load pt_regs as parameter
jg sys32_rt_sigreturn # branch to sys32_sigreturn
#endif
#
# sigsuspend and rt_sigsuspend need pt_regs as an additional
# parameter and they have to skip the store of %r2 into the
# user register %r2 because the return value was set in
# sigsuspend and rt_sigsuspend already and must not be overwritten!
#
sys_sigsuspend_glue:
lgr %r5,%r4 # move mask back
lgr %r4,%r3 # move history1 parameter
lgr %r3,%r2 # move history0 parameter
la %r2,SP_PTREGS(%r15) # load pt_regs as first parameter
la %r14,6(%r14) # skip store of return value
jg sys_sigsuspend # branch to sys_sigsuspend
#ifdef CONFIG_S390_SUPPORT
sys32_sigsuspend_glue:
llgfr %r4,%r4 # unsigned long
lgr %r5,%r4 # move mask back
lgfr %r3,%r3 # int
lgr %r4,%r3 # move history1 parameter
lgfr %r2,%r2 # int
lgr %r3,%r2 # move history0 parameter
la %r2,SP_PTREGS(%r15) # load pt_regs as first parameter
la %r14,6(%r14) # skip store of return value
jg sys32_sigsuspend # branch to sys32_sigsuspend
#endif
sys_rt_sigsuspend_glue:
lgr %r4,%r3 # move sigsetsize parameter
lgr %r3,%r2 # move unewset parameter
la %r2,SP_PTREGS(%r15) # load pt_regs as first parameter
la %r14,6(%r14) # skip store of return value
jg sys_rt_sigsuspend # branch to sys_rt_sigsuspend
#ifdef CONFIG_S390_SUPPORT
sys32_rt_sigsuspend_glue:
llgfr %r3,%r3 # size_t
lgr %r4,%r3 # move sigsetsize parameter
llgtr %r2,%r2 # sigset_emu31_t *
lgr %r3,%r2 # move unewset parameter
la %r2,SP_PTREGS(%r15) # load pt_regs as first parameter
la %r14,6(%r14) # skip store of return value
jg sys32_rt_sigsuspend # branch to sys32_rt_sigsuspend
#endif
sys_sigaltstack_glue:
la %r4,SP_PTREGS(%r15) # load pt_regs as parameter
jg sys_sigaltstack # branch to sys_sigreturn
#ifdef CONFIG_S390_SUPPORT
sys32_sigaltstack_glue:
la %r4,SP_PTREGS(%r15) # load pt_regs as parameter
jg sys32_sigaltstack_wrapper # branch to sys_sigreturn
#endif
/*
* Program check handler routine
*/
.globl pgm_check_handler
pgm_check_handler:
/*
* First we need to check for a special case:
* Single stepping an instruction that disables the PER event mask will
* cause a PER event AFTER the mask has been set. Example: SVC or LPSW.
* For a single stepped SVC the program check handler gets control after
* the SVC new PSW has been loaded. But we want to execute the SVC first and
* then handle the PER event. Therefore we update the SVC old PSW to point
* to the pgm_check_handler and branch to the SVC handler after we checked
* if we have to load the kernel stack register.
* For every other possible cause for PER event without the PER mask set
* we just ignore the PER event (FIXME: is there anything we have to do
* for LPSW?).
*/
STORE_TIMER __LC_SYNC_ENTER_TIMER
SAVE_ALL_BASE __LC_SAVE_AREA
tm __LC_PGM_INT_CODE+1,0x80 # check whether we got a per exception
jnz pgm_per # got per exception -> special case
SAVE_ALL __LC_PGM_OLD_PSW,__LC_SAVE_AREA,1
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
tm SP_PSW+1(%r15),0x01 # interrupting from user ?
jz pgm_no_vtime
UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER
UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
pgm_no_vtime:
#endif
lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct
lgf %r3,__LC_PGM_ILC # load program interruption code
lghi %r8,0x7f
ngr %r8,%r3
pgm_do_call:
sll %r8,3
larl %r1,pgm_check_table
lg %r1,0(%r8,%r1) # load address of handler routine
la %r2,SP_PTREGS(%r15) # address of register-save area
larl %r14,sysc_return
br %r1 # branch to interrupt-handler
#
# handle per exception
#
pgm_per:
tm __LC_PGM_OLD_PSW,0x40 # test if per event recording is on
jnz pgm_per_std # ok, normal per event from user space
# ok its one of the special cases, now we need to find out which one
clc __LC_PGM_OLD_PSW(16),__LC_SVC_NEW_PSW
je pgm_svcper
# no interesting special case, ignore PER event
lmg %r12,%r15,__LC_SAVE_AREA
lpswe __LC_PGM_OLD_PSW
#
# Normal per exception
#
pgm_per_std:
SAVE_ALL __LC_PGM_OLD_PSW,__LC_SAVE_AREA,1
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
tm SP_PSW+1(%r15),0x01 # interrupting from user ?
jz pgm_no_vtime2
UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER
UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
pgm_no_vtime2:
#endif
lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct
lg %r1,__TI_task(%r9)
mvc __THREAD_per+__PER_atmid(2,%r1),__LC_PER_ATMID
mvc __THREAD_per+__PER_address(8,%r1),__LC_PER_ADDRESS
mvc __THREAD_per+__PER_access_id(1,%r1),__LC_PER_ACCESS_ID
oi __TI_flags+7(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP
lgf %r3,__LC_PGM_ILC # load program interruption code
lghi %r8,0x7f
ngr %r8,%r3 # clear per-event-bit and ilc
je sysc_return
j pgm_do_call
#
# it was a single stepped SVC that is causing all the trouble
#
pgm_svcper:
SAVE_ALL __LC_SVC_OLD_PSW,__LC_SAVE_AREA,1
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
tm SP_PSW+1(%r15),0x01 # interrupting from user ?
jz pgm_no_vtime3
UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER
UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
pgm_no_vtime3:
#endif
llgh %r7,__LC_SVC_INT_CODE # get svc number from lowcore
lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct
lg %r1,__TI_task(%r9)
mvc __THREAD_per+__PER_atmid(2,%r1),__LC_PER_ATMID
mvc __THREAD_per+__PER_address(8,%r1),__LC_PER_ADDRESS
mvc __THREAD_per+__PER_access_id(1,%r1),__LC_PER_ACCESS_ID
oi __TI_flags+7(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP
stosm __SF_EMPTY(%r15),0x03 # reenable interrupts
j sysc_do_svc
/*
* IO interrupt handler routine
*/
.globl io_int_handler
io_int_handler:
STORE_TIMER __LC_ASYNC_ENTER_TIMER
stck __LC_INT_CLOCK
SAVE_ALL_BASE __LC_SAVE_AREA+32
SAVE_ALL __LC_IO_OLD_PSW,__LC_SAVE_AREA+32,0
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
tm SP_PSW+1(%r15),0x01 # interrupting from user ?
jz io_no_vtime
UPDATE_VTIME __LC_EXIT_TIMER,__LC_ASYNC_ENTER_TIMER,__LC_USER_TIMER
UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
mvc __LC_LAST_UPDATE_TIMER(8),__LC_ASYNC_ENTER_TIMER
io_no_vtime:
#endif
lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct
la %r2,SP_PTREGS(%r15) # address of register-save area
brasl %r14,do_IRQ # call standard irq handler
io_return:
tm SP_PSW+1(%r15),0x01 # returning to user ?
#ifdef CONFIG_PREEMPT
jno io_preempt # no -> check for preemptive scheduling
#else
jno io_leave # no-> skip resched & signal
#endif
tm __TI_flags+7(%r9),_TIF_WORK_INT
jnz io_work # there is work to do (signals etc.)
io_leave:
RESTORE_ALL 0
#ifdef CONFIG_PREEMPT
io_preempt:
icm %r0,15,__TI_precount(%r9)
jnz io_leave
# switch to kernel stack
lg %r1,SP_R15(%r15)
aghi %r1,-SP_SIZE
mvc SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15)
xc __SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1) # clear back chain
lgr %r15,%r1
io_resume_loop:
tm __TI_flags+7(%r9),_TIF_NEED_RESCHED
jno io_leave
larl %r1,.Lc_pactive
mvc __TI_precount(4,%r9),0(%r1)
stosm __SF_EMPTY(%r15),0x03 # reenable interrupts
brasl %r14,schedule # call schedule
stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts
xc __TI_precount(4,%r9),__TI_precount(%r9)
j io_resume_loop
#endif
#
# switch to kernel stack, then check TIF bits
#
io_work:
lg %r1,__LC_KERNEL_STACK
aghi %r1,-SP_SIZE
mvc SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15)
xc __SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1) # clear back chain
lgr %r15,%r1
#
# One of the work bits is on. Find out which one.
# Checked are: _TIF_SIGPENDING and _TIF_NEED_RESCHED
#
io_work_loop:
tm __TI_flags+7(%r9),_TIF_NEED_RESCHED
jo io_reschedule
tm __TI_flags+7(%r9),_TIF_SIGPENDING
jo io_sigpending
j io_leave
#
# _TIF_NEED_RESCHED is set, call schedule
#
io_reschedule:
stosm __SF_EMPTY(%r15),0x03 # reenable interrupts
brasl %r14,schedule # call scheduler
stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts
tm __TI_flags+7(%r9),_TIF_WORK_INT
jz io_leave # there is no work to do
j io_work_loop
#
# _TIF_SIGPENDING is set, call do_signal
#
io_sigpending:
stosm __SF_EMPTY(%r15),0x03 # reenable interrupts
la %r2,SP_PTREGS(%r15) # load pt_regs
slgr %r3,%r3 # clear *oldset
brasl %r14,do_signal # call do_signal
stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts
j sysc_leave # out of here, do NOT recheck
/*
* External interrupt handler routine
*/
.globl ext_int_handler
ext_int_handler:
STORE_TIMER __LC_ASYNC_ENTER_TIMER
stck __LC_INT_CLOCK
SAVE_ALL_BASE __LC_SAVE_AREA+32
SAVE_ALL __LC_EXT_OLD_PSW,__LC_SAVE_AREA+32,0
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
tm SP_PSW+1(%r15),0x01 # interrupting from user ?
jz ext_no_vtime
UPDATE_VTIME __LC_EXIT_TIMER,__LC_ASYNC_ENTER_TIMER,__LC_USER_TIMER
UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
mvc __LC_LAST_UPDATE_TIMER(8),__LC_ASYNC_ENTER_TIMER
ext_no_vtime:
#endif
lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct
la %r2,SP_PTREGS(%r15) # address of register-save area
llgh %r3,__LC_EXT_INT_CODE # get interruption code
brasl %r14,do_extint
j io_return
/*
* Machine check handler routines
*/
.globl mcck_int_handler
mcck_int_handler:
STORE_TIMER __LC_ASYNC_ENTER_TIMER
SAVE_ALL_BASE __LC_SAVE_AREA+64
SAVE_ALL __LC_MCK_OLD_PSW,__LC_SAVE_AREA+64,0
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
tm SP_PSW+1(%r15),0x01 # interrupting from user ?
jz mcck_no_vtime
UPDATE_VTIME __LC_EXIT_TIMER,__LC_ASYNC_ENTER_TIMER,__LC_USER_TIMER
UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
mvc __LC_LAST_UPDATE_TIMER(8),__LC_ASYNC_ENTER_TIMER
mcck_no_vtime:
#endif
brasl %r14,s390_do_machine_check
mcck_return:
RESTORE_ALL 0
#ifdef CONFIG_SMP
/*
* Restart interruption handler, kick starter for additional CPUs
*/
.globl restart_int_handler
restart_int_handler:
lg %r15,__LC_SAVE_AREA+120 # load ksp
lghi %r10,__LC_CREGS_SAVE_AREA
lctlg %c0,%c15,0(%r10) # get new ctl regs
lghi %r10,__LC_AREGS_SAVE_AREA
lam %a0,%a15,0(%r10)
lmg %r6,%r15,__SF_GPRS(%r15) # load registers from clone
stosm __SF_EMPTY(%r15),0x04 # now we can turn dat on
jg start_secondary
#else
/*
* If we do not run with SMP enabled, let the new CPU crash ...
*/
.globl restart_int_handler
restart_int_handler:
basr %r1,0
restart_base:
lpswe restart_crash-restart_base(%r1)
.align 8
restart_crash:
.long 0x000a0000,0x00000000,0x00000000,0x00000000
restart_go:
#endif
#ifdef CONFIG_CHECK_STACK
/*
* The synchronous or the asynchronous stack overflowed. We are dead.
* No need to properly save the registers, we are going to panic anyway.
* Setup a pt_regs so that show_trace can provide a good call trace.
*/
stack_overflow:
lg %r15,__LC_PANIC_STACK # change to panic stack
aghi %r1,-SP_SIZE
mvc SP_PSW(16,%r15),0(%r12) # move user PSW to stack
stmg %r0,%r11,SP_R0(%r15) # store gprs %r0-%r11 to kernel stack
la %r1,__LC_SAVE_AREA
chi %r12,__LC_SVC_OLD_PSW
je 0f
chi %r12,__LC_PGM_OLD_PSW
je 0f
la %r1,__LC_SAVE_AREA+16
0: mvc SP_R12(32,%r15),0(%r1) # move %r12-%r15 to stack
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) # clear back chain
la %r2,SP_PTREGS(%r15) # load pt_regs
jg kernel_stack_overflow
#endif
cleanup_table_system_call:
.quad system_call, sysc_do_svc
cleanup_table_sysc_return:
.quad sysc_return, sysc_leave
cleanup_table_sysc_leave:
.quad sysc_leave, sysc_work_loop
cleanup_table_sysc_work_loop:
.quad sysc_work_loop, sysc_reschedule
cleanup_critical:
clc 8(8,%r12),BASED(cleanup_table_system_call)
jl 0f
clc 8(8,%r12),BASED(cleanup_table_system_call+8)
jl cleanup_system_call
0:
clc 8(8,%r12),BASED(cleanup_table_sysc_return)
jl 0f
clc 8(8,%r12),BASED(cleanup_table_sysc_return+8)
jl cleanup_sysc_return
0:
clc 8(8,%r12),BASED(cleanup_table_sysc_leave)
jl 0f
clc 8(8,%r12),BASED(cleanup_table_sysc_leave+8)
jl cleanup_sysc_leave
0:
clc 8(8,%r12),BASED(cleanup_table_sysc_work_loop)
jl 0f
clc 8(8,%r12),BASED(cleanup_table_sysc_work_loop+8)
jl cleanup_sysc_leave
0:
br %r14
cleanup_system_call:
mvc __LC_RETURN_PSW(16),0(%r12)
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
clc __LC_RETURN_PSW+8(8),BASED(cleanup_system_call_insn+8)
jh 0f
mvc __LC_SYNC_ENTER_TIMER(8),__LC_ASYNC_ENTER_TIMER
0: clc __LC_RETURN_PSW+8(8),BASED(cleanup_system_call_insn+16)
jhe cleanup_vtime
#endif
clc __LC_RETURN_PSW+8(8),BASED(cleanup_system_call_insn)
jh 0f
mvc __LC_SAVE_AREA(32),__LC_SAVE_AREA+32
0: stg %r13,__LC_SAVE_AREA+40
SAVE_ALL __LC_SVC_OLD_PSW,__LC_SAVE_AREA,1
stg %r15,__LC_SAVE_AREA+56
llgh %r7,__LC_SVC_INT_CODE
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
cleanup_vtime:
clc __LC_RETURN_PSW+8(8),BASED(cleanup_system_call_insn+24)
jhe cleanup_stime
tm SP_PSW+1(%r15),0x01 # interrupting from user ?
jz cleanup_novtime
UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER
cleanup_stime:
clc __LC_RETURN_PSW+8(8),BASED(cleanup_system_call_insn+32)
jh cleanup_update
UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
cleanup_update:
mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
cleanup_novtime:
#endif
mvc __LC_RETURN_PSW+8(8),BASED(cleanup_table_system_call+8)
la %r12,__LC_RETURN_PSW
br %r14
cleanup_system_call_insn:
.quad sysc_saveall
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
.quad system_call
.quad sysc_vtime
.quad sysc_stime
.quad sysc_update
#endif
cleanup_sysc_return:
mvc __LC_RETURN_PSW(8),0(%r12)
mvc __LC_RETURN_PSW+8(8),BASED(cleanup_table_sysc_return)
la %r12,__LC_RETURN_PSW
br %r14
cleanup_sysc_leave:
clc 8(8,%r12),BASED(cleanup_sysc_leave_insn)
je 0f
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
mvc __LC_EXIT_TIMER(8),__LC_ASYNC_ENTER_TIMER
clc 8(8,%r12),BASED(cleanup_sysc_leave_insn+8)
je 0f
#endif
mvc __LC_RETURN_PSW(16),SP_PSW(%r15)
mvc __LC_SAVE_AREA+32(32),SP_R12(%r15)
lmg %r0,%r11,SP_R0(%r15)
lg %r15,SP_R15(%r15)
0: la %r12,__LC_RETURN_PSW
br %r14
cleanup_sysc_leave_insn:
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
.quad sysc_leave + 16
#endif
.quad sysc_leave + 12
/*
* Integer constants
*/
.align 4
.Lconst:
.Lc_pactive: .long PREEMPT_ACTIVE
.Lnr_syscalls: .long NR_syscalls
.L0x0130: .short 0x130
.L0x0140: .short 0x140
.L0x0150: .short 0x150
.L0x0160: .short 0x160
.L0x0170: .short 0x170
.Lcritical_start:
.quad __critical_start
.Lcritical_end:
.quad __critical_end
#define SYSCALL(esa,esame,emu) .long esame
.globl sys_call_table
sys_call_table:
#include "syscalls.S"
#undef SYSCALL
#ifdef CONFIG_S390_SUPPORT
#define SYSCALL(esa,esame,emu) .long emu
.globl sys_call_table_emu
sys_call_table_emu:
#include "syscalls.S"
#undef SYSCALL
#endif
View Git Blame Copy Permalink