1
linux/drivers/input/keyboard/amikbd.c
Jiri Slaby 7b19ada2ed get rid of input BIT* duplicate defines
get rid of input BIT* duplicate defines

use newly global defined macros for input layer. Also remove includes of
input.h from non-input sources only for BIT macro definiton. Define the
macro temporarily in local manner, all those local definitons will be
removed further in this patchset (to not break bisecting).
BIT macro will be globally defined (1<<x)

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: <dtor@mail.ru>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Cc: <lenb@kernel.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Cc: <perex@suse.cz>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: <vernux@us.ibm.com>
Cc: <malattia@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:42 -07:00

261 lines
6.4 KiB
C

/*
* $Id: amikbd.c,v 1.13 2002/02/01 16:02:24 vojtech Exp $
*
* Copyright (c) 2000-2001 Vojtech Pavlik
*
* Based on the work of:
* Hamish Macdonald
*/
/*
* Amiga keyboard driver for Linux/m68k
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Should you need to contact me, the author, you can do so either by
* e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
* Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/keyboard.h>
#include <asm/amigaints.h>
#include <asm/amigahw.h>
#include <asm/irq.h>
MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION("Amiga keyboard driver");
MODULE_LICENSE("GPL");
static unsigned char amikbd_keycode[0x78] __initdata = {
[0] = KEY_GRAVE,
[1] = KEY_1,
[2] = KEY_2,
[3] = KEY_3,
[4] = KEY_4,
[5] = KEY_5,
[6] = KEY_6,
[7] = KEY_7,
[8] = KEY_8,
[9] = KEY_9,
[10] = KEY_0,
[11] = KEY_MINUS,
[12] = KEY_EQUAL,
[13] = KEY_BACKSLASH,
[15] = KEY_KP0,
[16] = KEY_Q,
[17] = KEY_W,
[18] = KEY_E,
[19] = KEY_R,
[20] = KEY_T,
[21] = KEY_Y,
[22] = KEY_U,
[23] = KEY_I,
[24] = KEY_O,
[25] = KEY_P,
[26] = KEY_LEFTBRACE,
[27] = KEY_RIGHTBRACE,
[29] = KEY_KP1,
[30] = KEY_KP2,
[31] = KEY_KP3,
[32] = KEY_A,
[33] = KEY_S,
[34] = KEY_D,
[35] = KEY_F,
[36] = KEY_G,
[37] = KEY_H,
[38] = KEY_J,
[39] = KEY_K,
[40] = KEY_L,
[41] = KEY_SEMICOLON,
[42] = KEY_APOSTROPHE,
[43] = KEY_BACKSLASH,
[45] = KEY_KP4,
[46] = KEY_KP5,
[47] = KEY_KP6,
[48] = KEY_102ND,
[49] = KEY_Z,
[50] = KEY_X,
[51] = KEY_C,
[52] = KEY_V,
[53] = KEY_B,
[54] = KEY_N,
[55] = KEY_M,
[56] = KEY_COMMA,
[57] = KEY_DOT,
[58] = KEY_SLASH,
[60] = KEY_KPDOT,
[61] = KEY_KP7,
[62] = KEY_KP8,
[63] = KEY_KP9,
[64] = KEY_SPACE,
[65] = KEY_BACKSPACE,
[66] = KEY_TAB,
[67] = KEY_KPENTER,
[68] = KEY_ENTER,
[69] = KEY_ESC,
[70] = KEY_DELETE,
[74] = KEY_KPMINUS,
[76] = KEY_UP,
[77] = KEY_DOWN,
[78] = KEY_RIGHT,
[79] = KEY_LEFT,
[80] = KEY_F1,
[81] = KEY_F2,
[82] = KEY_F3,
[83] = KEY_F4,
[84] = KEY_F5,
[85] = KEY_F6,
[86] = KEY_F7,
[87] = KEY_F8,
[88] = KEY_F9,
[89] = KEY_F10,
[90] = KEY_KPLEFTPAREN,
[91] = KEY_KPRIGHTPAREN,
[92] = KEY_KPSLASH,
[93] = KEY_KPASTERISK,
[94] = KEY_KPPLUS,
[95] = KEY_HELP,
[96] = KEY_LEFTSHIFT,
[97] = KEY_RIGHTSHIFT,
[98] = KEY_CAPSLOCK,
[99] = KEY_LEFTCTRL,
[100] = KEY_LEFTALT,
[101] = KEY_RIGHTALT,
[102] = KEY_LEFTMETA,
[103] = KEY_RIGHTMETA
};
static const char *amikbd_messages[8] = {
[0] = KERN_ALERT "amikbd: Ctrl-Amiga-Amiga reset warning!!\n",
[1] = KERN_WARNING "amikbd: keyboard lost sync\n",
[2] = KERN_WARNING "amikbd: keyboard buffer overflow\n",
[3] = KERN_WARNING "amikbd: keyboard controller failure\n",
[4] = KERN_ERR "amikbd: keyboard selftest failure\n",
[5] = KERN_INFO "amikbd: initiate power-up key stream\n",
[6] = KERN_INFO "amikbd: terminate power-up key stream\n",
[7] = KERN_WARNING "amikbd: keyboard interrupt\n"
};
static struct input_dev *amikbd_dev;
static irqreturn_t amikbd_interrupt(int irq, void *dummy)
{
unsigned char scancode, down;
scancode = ~ciaa.sdr; /* get and invert scancode (keyboard is active low) */
ciaa.cra |= 0x40; /* switch SP pin to output for handshake */
udelay(85); /* wait until 85 us have expired */
ciaa.cra &= ~0x40; /* switch CIA serial port to input mode */
down = !(scancode & 1); /* lowest bit is release bit */
scancode >>= 1;
if (scancode < 0x78) { /* scancodes < 0x78 are keys */
if (scancode == 98) { /* CapsLock is a toggle switch key on Amiga */
input_report_key(amikbd_dev, scancode, 1);
input_report_key(amikbd_dev, scancode, 0);
} else {
input_report_key(amikbd_dev, scancode, down);
}
input_sync(amikbd_dev);
} else /* scancodes >= 0x78 are error codes */
printk(amikbd_messages[scancode - 0x78]);
return IRQ_HANDLED;
}
static int __init amikbd_init(void)
{
int i, j, err;
if (!AMIGAHW_PRESENT(AMI_KEYBOARD))
return -ENODEV;
if (!request_mem_region(CIAA_PHYSADDR-1+0xb00, 0x100, "amikeyb"))
return -EBUSY;
amikbd_dev = input_allocate_device();
if (!amikbd_dev) {
printk(KERN_ERR "amikbd: not enough memory for input device\n");
err = -ENOMEM;
goto fail1;
}
amikbd_dev->name = "Amiga Keyboard";
amikbd_dev->phys = "amikbd/input0";
amikbd_dev->id.bustype = BUS_AMIGA;
amikbd_dev->id.vendor = 0x0001;
amikbd_dev->id.product = 0x0001;
amikbd_dev->id.version = 0x0100;
amikbd_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
for (i = 0; i < 0x78; i++)
set_bit(i, amikbd_dev->keybit);
for (i = 0; i < MAX_NR_KEYMAPS; i++) {
static u_short temp_map[NR_KEYS] __initdata;
if (!key_maps[i])
continue;
memset(temp_map, 0, sizeof(temp_map));
for (j = 0; j < 0x78; j++) {
if (!amikbd_keycode[j])
continue;
temp_map[j] = key_maps[i][amikbd_keycode[j]];
}
for (j = 0; j < NR_KEYS; j++) {
if (!temp_map[j])
temp_map[j] = 0xf200;
}
memcpy(key_maps[i], temp_map, sizeof(temp_map));
}
ciaa.cra &= ~0x41; /* serial data in, turn off TA */
if (request_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt, 0, "amikbd",
amikbd_interrupt)) {
err = -EBUSY;
goto fail2;
}
err = input_register_device(amikbd_dev);
if (err)
goto fail3;
return 0;
fail3: free_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt);
fail2: input_free_device(amikbd_dev);
fail1: release_mem_region(CIAA_PHYSADDR - 1 + 0xb00, 0x100);
return err;
}
static void __exit amikbd_exit(void)
{
free_irq(IRQ_AMIGA_CIAA_SP, amikbd_interrupt);
input_unregister_device(amikbd_dev);
release_mem_region(CIAA_PHYSADDR - 1 + 0xb00, 0x100);
}
module_init(amikbd_init);
module_exit(amikbd_exit);