1
linux/drivers/usb
Sergei Shtylyov 196f1b7a38 USB: musb_gadget_ep0: fix unhandled endpoint 0 IRQs, again
Commit a5073b5283 (musb_gadget: fix
unhandled endpoint 0 IRQs) somehow missed its key change:

"The gadget EP0 code routinely ignores an interrupt at end of
the data phase because of musb_g_ep0_giveback() resetting the
state machine to "idle, waiting for SETUP" phase prematurely."

So, the majority of the cases of unhandled IRQs is still unfixed...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11 11:55:25 -08:00
..
atm tree-wide: fix assorted typos all over the place 2009-12-04 15:39:55 +01:00
c67x00
class USB: Exposing second ACM channel as tty for Nokia S60 phones. 2009-12-11 11:55:20 -08:00
core USB: fix possible null deref in init_usb_class() 2009-12-11 11:55:22 -08:00
early USB: ehci-dbgp: errata for EHCI debug/host controller synchronization 2009-09-23 06:46:38 -07:00
gadget USB: g_multi: Multifunction Composite Gadget added 2009-12-11 11:55:23 -08:00
host USB: xhci: Handle errors that cause endpoint halts. 2009-12-11 11:55:23 -08:00
image USB: remove unneeded printks from microtek driver 2009-09-23 06:46:34 -07:00
misc usbtest: make module param pattern writeable 2009-12-11 11:55:22 -08:00
mon USB: add scatter-gather support to usbmon 2009-12-11 11:55:20 -08:00
musb USB: musb_gadget_ep0: fix unhandled endpoint 0 IRQs, again 2009-12-11 11:55:25 -08:00
otg USB OTG: Add generic driver for ULPI OTG transceiver 2009-12-11 11:55:16 -08:00
serial USB: remove the auto_pm flag 2009-12-11 11:55:21 -08:00
storage USB: make urb scatter-gather support more generic 2009-12-11 11:55:14 -08:00
wusbcore USB: wusb: add wusb_phy_rate sysfs file to host controllers 2009-12-11 11:55:16 -08:00
Kconfig USB: ehci: Allow EHCI to be built on OMAP3 2009-12-11 11:55:20 -08:00
Makefile USB OTG: Add generic driver for ULPI OTG transceiver 2009-12-11 11:55:16 -08:00
README
usb-skeleton.c USB: skeleton: Correct use of ! and & 2009-12-11 11:55:14 -08:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.