0df0914d41
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits) omap: zoom: host should not pull up wl1271's irq line arm: plat-omap: iommu: fix request_mem_region() error path OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430 omap4: mux: Remove duplicate mux modes omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected omap4: board-omap4panda: Initialise the serial pads omap3: board-3430sdp: Initialise the serial pads omap4: board-4430sdp: Initialise the serial pads omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init omap2+: mux: Remove the use of IDLE flag omap2+: Add separate list for dynamic pads to mux perf: add OMAP support for the new power events OMAP4: Add IVA OPP enteries. OMAP4: Update Voltage Rail Values for MPU, IVA and CORE OMAP4: Enable 800 MHz and 1 GHz MPU-OPP OMAP3+: OPP: Replace voltage values with Macros OMAP3: wdtimer: Fix CORE idle transition Watchdog: omap_wdt: add fine grain runtime-pm ... Fix up various conflicts in - arch/arm/mach-omap2/board-omap3evm.c - arch/arm/mach-omap2/clock3xxx_data.c - arch/arm/mach-omap2/usb-musb.c - arch/arm/plat-omap/include/plat/usb.h - drivers/usb/musb/musb_core.h
347 lines
11 KiB
ArmAsm
347 lines
11 KiB
ArmAsm
/*
|
|
* linux/arch/arm/mach-omap3/sram.S
|
|
*
|
|
* Omap3 specific functions that need to be run in internal SRAM
|
|
*
|
|
* Copyright (C) 2004, 2007, 2008 Texas Instruments, Inc.
|
|
* Copyright (C) 2008 Nokia Corporation
|
|
*
|
|
* Rajendra Nayak <rnayak@ti.com>
|
|
* Richard Woodruff <r-woodruff2@ti.com>
|
|
* Paul Walmsley
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
#include <linux/linkage.h>
|
|
#include <asm/assembler.h>
|
|
#include <mach/hardware.h>
|
|
|
|
#include <mach/io.h>
|
|
|
|
#include "sdrc.h"
|
|
#include "cm2xxx_3xxx.h"
|
|
|
|
/*
|
|
* This file needs be built unconditionally as ARM to interoperate correctly
|
|
* with non-Thumb-2-capable firmware.
|
|
*/
|
|
.arm
|
|
|
|
.text
|
|
|
|
/* r1 parameters */
|
|
#define SDRC_NO_UNLOCK_DLL 0x0
|
|
#define SDRC_UNLOCK_DLL 0x1
|
|
|
|
/* SDRC_DLLA_CTRL bit settings */
|
|
#define FIXEDDELAY_SHIFT 24
|
|
#define FIXEDDELAY_MASK (0xff << FIXEDDELAY_SHIFT)
|
|
#define DLLIDLE_MASK 0x4
|
|
|
|
/*
|
|
* SDRC_DLLA_CTRL default values: TI hardware team indicates that
|
|
* FIXEDDELAY should be initialized to 0xf. This apparently was
|
|
* empirically determined during process testing, so no derivation
|
|
* was provided.
|
|
*/
|
|
#define FIXEDDELAY_DEFAULT (0x0f << FIXEDDELAY_SHIFT)
|
|
|
|
/* SDRC_DLLA_STATUS bit settings */
|
|
#define LOCKSTATUS_MASK 0x4
|
|
|
|
/* SDRC_POWER bit settings */
|
|
#define SRFRONIDLEREQ_MASK 0x40
|
|
|
|
/* CM_IDLEST1_CORE bit settings */
|
|
#define ST_SDRC_MASK 0x2
|
|
|
|
/* CM_ICLKEN1_CORE bit settings */
|
|
#define EN_SDRC_MASK 0x2
|
|
|
|
/* CM_CLKSEL1_PLL bit settings */
|
|
#define CORE_DPLL_CLKOUT_DIV_SHIFT 0x1b
|
|
|
|
/*
|
|
* omap3_sram_configure_core_dpll - change DPLL3 M2 divider
|
|
*
|
|
* Params passed in registers:
|
|
* r0 = new M2 divider setting (only 1 and 2 supported right now)
|
|
* r1 = unlock SDRC DLL? (1 = yes, 0 = no). Only unlock DLL for
|
|
* SDRC rates < 83MHz
|
|
* r2 = number of MPU cycles to wait for SDRC to stabilize after
|
|
* reprogramming the SDRC when switching to a slower MPU speed
|
|
* r3 = increasing SDRC rate? (1 = yes, 0 = no)
|
|
*
|
|
* Params passed via the stack. The needed params will be copied in SRAM
|
|
* before use by the code in SRAM (SDRAM is not accessible during SDRC
|
|
* reconfiguration):
|
|
* new SDRC_RFR_CTRL_0 register contents
|
|
* new SDRC_ACTIM_CTRL_A_0 register contents
|
|
* new SDRC_ACTIM_CTRL_B_0 register contents
|
|
* new SDRC_MR_0 register value
|
|
* new SDRC_RFR_CTRL_1 register contents
|
|
* new SDRC_ACTIM_CTRL_A_1 register contents
|
|
* new SDRC_ACTIM_CTRL_B_1 register contents
|
|
* new SDRC_MR_1 register value
|
|
*
|
|
* If the param SDRC_RFR_CTRL_1 is 0, the parameters are not programmed into
|
|
* the SDRC CS1 registers
|
|
*
|
|
* NOTE: This code no longer attempts to program the SDRC AC timing and MR
|
|
* registers. This is because the code currently cannot ensure that all
|
|
* L3 initiators (e.g., sDMA, IVA, DSS DISPC, etc.) are not accessing the
|
|
* SDRAM when the registers are written. If the registers are changed while
|
|
* an initiator is accessing SDRAM, memory can be corrupted and/or the SDRC
|
|
* may enter an unpredictable state. In the future, the intent is to
|
|
* re-enable this code in cases where we can ensure that no initiators are
|
|
* touching the SDRAM. Until that time, users who know that their use case
|
|
* can satisfy the above requirement can enable the CONFIG_OMAP3_SDRC_AC_TIMING
|
|
* option.
|
|
*
|
|
* Richard Woodruff notes that any changes to this code must be carefully
|
|
* audited and tested to ensure that they don't cause a TLB miss while
|
|
* the SDRAM is inaccessible. Such a situation will crash the system
|
|
* since it will cause the ARM MMU to attempt to walk the page tables.
|
|
* These crashes may be intermittent.
|
|
*/
|
|
.align 3
|
|
ENTRY(omap3_sram_configure_core_dpll)
|
|
stmfd sp!, {r1-r12, lr} @ store regs to stack
|
|
|
|
@ pull the extra args off the stack
|
|
@ and store them in SRAM
|
|
|
|
/*
|
|
* PC-relative stores are deprecated in ARMv7 and lead to undefined behaviour
|
|
* in Thumb-2: use a r7 as a base instead.
|
|
* Be careful not to clobber r7 when maintaing this file.
|
|
*/
|
|
THUMB( adr r7, omap3_sram_configure_core_dpll )
|
|
.macro strtext Rt:req, label:req
|
|
ARM( str \Rt, \label )
|
|
THUMB( str \Rt, [r7, \label - omap3_sram_configure_core_dpll] )
|
|
.endm
|
|
|
|
ldr r4, [sp, #52]
|
|
strtext r4, omap_sdrc_rfr_ctrl_0_val
|
|
ldr r4, [sp, #56]
|
|
strtext r4, omap_sdrc_actim_ctrl_a_0_val
|
|
ldr r4, [sp, #60]
|
|
strtext r4, omap_sdrc_actim_ctrl_b_0_val
|
|
ldr r4, [sp, #64]
|
|
strtext r4, omap_sdrc_mr_0_val
|
|
ldr r4, [sp, #68]
|
|
strtext r4, omap_sdrc_rfr_ctrl_1_val
|
|
cmp r4, #0 @ if SDRC_RFR_CTRL_1 is 0,
|
|
beq skip_cs1_params @ do not use cs1 params
|
|
ldr r4, [sp, #72]
|
|
strtext r4, omap_sdrc_actim_ctrl_a_1_val
|
|
ldr r4, [sp, #76]
|
|
strtext r4, omap_sdrc_actim_ctrl_b_1_val
|
|
ldr r4, [sp, #80]
|
|
strtext r4, omap_sdrc_mr_1_val
|
|
skip_cs1_params:
|
|
mrc p15, 0, r8, c1, c0, 0 @ read ctrl register
|
|
bic r10, r8, #0x800 @ clear Z-bit, disable branch prediction
|
|
mcr p15, 0, r10, c1, c0, 0 @ write ctrl register
|
|
dsb @ flush buffered writes to interconnect
|
|
isb @ prevent speculative exec past here
|
|
cmp r3, #1 @ if increasing SDRC clk rate,
|
|
bleq configure_sdrc @ program the SDRC regs early (for RFR)
|
|
cmp r1, #SDRC_UNLOCK_DLL @ set the intended DLL state
|
|
bleq unlock_dll
|
|
blne lock_dll
|
|
bl sdram_in_selfrefresh @ put SDRAM in self refresh, idle SDRC
|
|
bl configure_core_dpll @ change the DPLL3 M2 divider
|
|
mov r12, r2
|
|
bl wait_clk_stable @ wait for SDRC to stabilize
|
|
bl enable_sdrc @ take SDRC out of idle
|
|
cmp r1, #SDRC_UNLOCK_DLL @ wait for DLL status to change
|
|
bleq wait_dll_unlock
|
|
blne wait_dll_lock
|
|
cmp r3, #1 @ if increasing SDRC clk rate,
|
|
beq return_to_sdram @ return to SDRAM code, otherwise,
|
|
bl configure_sdrc @ reprogram SDRC regs now
|
|
return_to_sdram:
|
|
mcr p15, 0, r8, c1, c0, 0 @ restore ctrl register
|
|
isb @ prevent speculative exec past here
|
|
mov r0, #0 @ return value
|
|
ldmfd sp!, {r1-r12, pc} @ restore regs and return
|
|
unlock_dll:
|
|
ldr r11, omap3_sdrc_dlla_ctrl
|
|
ldr r12, [r11]
|
|
bic r12, r12, #FIXEDDELAY_MASK
|
|
orr r12, r12, #FIXEDDELAY_DEFAULT
|
|
orr r12, r12, #DLLIDLE_MASK
|
|
str r12, [r11] @ (no OCP barrier needed)
|
|
bx lr
|
|
lock_dll:
|
|
ldr r11, omap3_sdrc_dlla_ctrl
|
|
ldr r12, [r11]
|
|
bic r12, r12, #DLLIDLE_MASK
|
|
str r12, [r11] @ (no OCP barrier needed)
|
|
bx lr
|
|
sdram_in_selfrefresh:
|
|
ldr r11, omap3_sdrc_power @ read the SDRC_POWER register
|
|
ldr r12, [r11] @ read the contents of SDRC_POWER
|
|
mov r9, r12 @ keep a copy of SDRC_POWER bits
|
|
orr r12, r12, #SRFRONIDLEREQ_MASK @ enable self refresh on idle
|
|
str r12, [r11] @ write back to SDRC_POWER register
|
|
ldr r12, [r11] @ posted-write barrier for SDRC
|
|
idle_sdrc:
|
|
ldr r11, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg
|
|
ldr r12, [r11]
|
|
bic r12, r12, #EN_SDRC_MASK @ disable iclk bit for SDRC
|
|
str r12, [r11]
|
|
wait_sdrc_idle:
|
|
ldr r11, omap3_cm_idlest1_core
|
|
ldr r12, [r11]
|
|
and r12, r12, #ST_SDRC_MASK @ check for SDRC idle
|
|
cmp r12, #ST_SDRC_MASK
|
|
bne wait_sdrc_idle
|
|
bx lr
|
|
configure_core_dpll:
|
|
ldr r11, omap3_cm_clksel1_pll
|
|
ldr r12, [r11]
|
|
ldr r10, core_m2_mask_val @ modify m2 for core dpll
|
|
and r12, r12, r10
|
|
orr r12, r12, r0, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT
|
|
str r12, [r11]
|
|
ldr r12, [r11] @ posted-write barrier for CM
|
|
bx lr
|
|
wait_clk_stable:
|
|
subs r12, r12, #1
|
|
bne wait_clk_stable
|
|
bx lr
|
|
enable_sdrc:
|
|
ldr r11, omap3_cm_iclken1_core
|
|
ldr r12, [r11]
|
|
orr r12, r12, #EN_SDRC_MASK @ enable iclk bit for SDRC
|
|
str r12, [r11]
|
|
wait_sdrc_idle1:
|
|
ldr r11, omap3_cm_idlest1_core
|
|
ldr r12, [r11]
|
|
and r12, r12, #ST_SDRC_MASK
|
|
cmp r12, #0
|
|
bne wait_sdrc_idle1
|
|
restore_sdrc_power_val:
|
|
ldr r11, omap3_sdrc_power
|
|
str r9, [r11] @ restore SDRC_POWER, no barrier needed
|
|
bx lr
|
|
wait_dll_lock:
|
|
ldr r11, omap3_sdrc_dlla_status
|
|
ldr r12, [r11]
|
|
and r12, r12, #LOCKSTATUS_MASK
|
|
cmp r12, #LOCKSTATUS_MASK
|
|
bne wait_dll_lock
|
|
bx lr
|
|
wait_dll_unlock:
|
|
ldr r11, omap3_sdrc_dlla_status
|
|
ldr r12, [r11]
|
|
and r12, r12, #LOCKSTATUS_MASK
|
|
cmp r12, #0x0
|
|
bne wait_dll_unlock
|
|
bx lr
|
|
configure_sdrc:
|
|
ldr r12, omap_sdrc_rfr_ctrl_0_val @ fetch value from SRAM
|
|
ldr r11, omap3_sdrc_rfr_ctrl_0 @ fetch addr from SRAM
|
|
str r12, [r11] @ store
|
|
#ifdef CONFIG_OMAP3_SDRC_AC_TIMING
|
|
ldr r12, omap_sdrc_actim_ctrl_a_0_val
|
|
ldr r11, omap3_sdrc_actim_ctrl_a_0
|
|
str r12, [r11]
|
|
ldr r12, omap_sdrc_actim_ctrl_b_0_val
|
|
ldr r11, omap3_sdrc_actim_ctrl_b_0
|
|
str r12, [r11]
|
|
ldr r12, omap_sdrc_mr_0_val
|
|
ldr r11, omap3_sdrc_mr_0
|
|
str r12, [r11]
|
|
#endif
|
|
ldr r12, omap_sdrc_rfr_ctrl_1_val
|
|
cmp r12, #0 @ if SDRC_RFR_CTRL_1 is 0,
|
|
beq skip_cs1_prog @ do not program cs1 params
|
|
ldr r11, omap3_sdrc_rfr_ctrl_1
|
|
str r12, [r11]
|
|
#ifdef CONFIG_OMAP3_SDRC_AC_TIMING
|
|
ldr r12, omap_sdrc_actim_ctrl_a_1_val
|
|
ldr r11, omap3_sdrc_actim_ctrl_a_1
|
|
str r12, [r11]
|
|
ldr r12, omap_sdrc_actim_ctrl_b_1_val
|
|
ldr r11, omap3_sdrc_actim_ctrl_b_1
|
|
str r12, [r11]
|
|
ldr r12, omap_sdrc_mr_1_val
|
|
ldr r11, omap3_sdrc_mr_1
|
|
str r12, [r11]
|
|
#endif
|
|
skip_cs1_prog:
|
|
ldr r12, [r11] @ posted-write barrier for SDRC
|
|
bx lr
|
|
|
|
.align
|
|
omap3_sdrc_power:
|
|
.word OMAP34XX_SDRC_REGADDR(SDRC_POWER)
|
|
omap3_cm_clksel1_pll:
|
|
.word OMAP34XX_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
|
|
omap3_cm_idlest1_core:
|
|
.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST)
|
|
omap3_cm_iclken1_core:
|
|
.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1)
|
|
|
|
omap3_sdrc_rfr_ctrl_0:
|
|
.word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0)
|
|
omap3_sdrc_rfr_ctrl_1:
|
|
.word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_1)
|
|
omap3_sdrc_actim_ctrl_a_0:
|
|
.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0)
|
|
omap3_sdrc_actim_ctrl_a_1:
|
|
.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_1)
|
|
omap3_sdrc_actim_ctrl_b_0:
|
|
.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0)
|
|
omap3_sdrc_actim_ctrl_b_1:
|
|
.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_1)
|
|
omap3_sdrc_mr_0:
|
|
.word OMAP34XX_SDRC_REGADDR(SDRC_MR_0)
|
|
omap3_sdrc_mr_1:
|
|
.word OMAP34XX_SDRC_REGADDR(SDRC_MR_1)
|
|
omap_sdrc_rfr_ctrl_0_val:
|
|
.word 0xDEADBEEF
|
|
omap_sdrc_rfr_ctrl_1_val:
|
|
.word 0xDEADBEEF
|
|
omap_sdrc_actim_ctrl_a_0_val:
|
|
.word 0xDEADBEEF
|
|
omap_sdrc_actim_ctrl_a_1_val:
|
|
.word 0xDEADBEEF
|
|
omap_sdrc_actim_ctrl_b_0_val:
|
|
.word 0xDEADBEEF
|
|
omap_sdrc_actim_ctrl_b_1_val:
|
|
.word 0xDEADBEEF
|
|
omap_sdrc_mr_0_val:
|
|
.word 0xDEADBEEF
|
|
omap_sdrc_mr_1_val:
|
|
.word 0xDEADBEEF
|
|
|
|
omap3_sdrc_dlla_status:
|
|
.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
|
|
omap3_sdrc_dlla_ctrl:
|
|
.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
|
|
core_m2_mask_val:
|
|
.word 0x07FFFFFF
|
|
ENDPROC(omap3_sram_configure_core_dpll)
|
|
|
|
ENTRY(omap3_sram_configure_core_dpll_sz)
|
|
.word . - omap3_sram_configure_core_dpll
|
|
|