1
linux/arch/x86/kernel/acpi/cstate.c
Zhao Yakui 13b40a1a06 ACPI: Avoid array address overflow when _CST MWAIT hint bits are set
The Cx Register address obtained from the _CST object is used as the MWAIT
hints if the register type is FFixedHW. And it is used to check whether
the Cx type is supported or not.

On some boxes the following Cx state package is obtained from _CST object:
    >{
                ResourceTemplate ()
                {
                    Register (FFixedHW,
                        0x01,               // Bit Width
                        0x02,               // Bit Offset
                        0x0000000000889759, // Address
                        0x03,               // Access Size
                        )
                },

                0x03,
                0xF5,
                0x015E }

   In such case we should use the bit[7:4] of Cx address to check whether
the Cx type is supported or not.

mask the MWAIT hint to avoid array address overflow

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by:Venki Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-01-09 01:28:01 -05:00

167 lines
4.4 KiB
C

/*
* Copyright (C) 2005 Intel Corporation
* Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
* - Added _PDC for SMP C-states on Intel CPUs
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/acpi.h>
#include <linux/cpu.h>
#include <linux/sched.h>
#include <acpi/processor.h>
#include <asm/acpi.h>
/*
* Initialize bm_flags based on the CPU cache properties
* On SMP it depends on cache configuration
* - When cache is not shared among all CPUs, we flush cache
* before entering C3.
* - When cache is shared among all CPUs, we use bm_check
* mechanism as in UP case
*
* This routine is called only after all the CPUs are online
*/
void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags,
unsigned int cpu)
{
struct cpuinfo_x86 *c = &cpu_data(cpu);
flags->bm_check = 0;
if (num_online_cpus() == 1)
flags->bm_check = 1;
else if (c->x86_vendor == X86_VENDOR_INTEL) {
/*
* Today all CPUs that support C3 share cache.
* TBD: This needs to look at cache shared map, once
* multi-core detection patch makes to the base.
*/
flags->bm_check = 1;
}
}
EXPORT_SYMBOL(acpi_processor_power_init_bm_check);
/* The code below handles cstate entry with monitor-mwait pair on Intel*/
struct cstate_entry {
struct {
unsigned int eax;
unsigned int ecx;
} states[ACPI_PROCESSOR_MAX_POWER];
};
static struct cstate_entry *cpu_cstate_entry; /* per CPU ptr */
static short mwait_supported[ACPI_PROCESSOR_MAX_POWER];
#define MWAIT_SUBSTATE_MASK (0xf)
#define MWAIT_CSTATE_MASK (0xf)
#define MWAIT_SUBSTATE_SIZE (4)
#define CPUID_MWAIT_LEAF (5)
#define CPUID5_ECX_EXTENSIONS_SUPPORTED (0x1)
#define CPUID5_ECX_INTERRUPT_BREAK (0x2)
#define MWAIT_ECX_INTERRUPT_BREAK (0x1)
#define NATIVE_CSTATE_BEYOND_HALT (2)
int acpi_processor_ffh_cstate_probe(unsigned int cpu,
struct acpi_processor_cx *cx, struct acpi_power_register *reg)
{
struct cstate_entry *percpu_entry;
struct cpuinfo_x86 *c = &cpu_data(cpu);
cpumask_t saved_mask;
int retval;
unsigned int eax, ebx, ecx, edx;
unsigned int edx_part;
unsigned int cstate_type; /* C-state type and not ACPI C-state type */
unsigned int num_cstate_subtype;
if (!cpu_cstate_entry || c->cpuid_level < CPUID_MWAIT_LEAF )
return -1;
if (reg->bit_offset != NATIVE_CSTATE_BEYOND_HALT)
return -1;
percpu_entry = per_cpu_ptr(cpu_cstate_entry, cpu);
percpu_entry->states[cx->index].eax = 0;
percpu_entry->states[cx->index].ecx = 0;
/* Make sure we are running on right CPU */
saved_mask = current->cpus_allowed;
retval = set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
if (retval)
return -1;
cpuid(CPUID_MWAIT_LEAF, &eax, &ebx, &ecx, &edx);
/* Check whether this particular cx_type (in CST) is supported or not */
cstate_type = ((cx->address >> MWAIT_SUBSTATE_SIZE) &
MWAIT_CSTATE_MASK) + 1;
edx_part = edx >> (cstate_type * MWAIT_SUBSTATE_SIZE);
num_cstate_subtype = edx_part & MWAIT_SUBSTATE_MASK;
retval = 0;
if (num_cstate_subtype < (cx->address & MWAIT_SUBSTATE_MASK)) {
retval = -1;
goto out;
}
/* mwait ecx extensions INTERRUPT_BREAK should be supported for C2/C3 */
if (!(ecx & CPUID5_ECX_EXTENSIONS_SUPPORTED) ||
!(ecx & CPUID5_ECX_INTERRUPT_BREAK)) {
retval = -1;
goto out;
}
percpu_entry->states[cx->index].ecx = MWAIT_ECX_INTERRUPT_BREAK;
/* Use the hint in CST */
percpu_entry->states[cx->index].eax = cx->address;
if (!mwait_supported[cstate_type]) {
mwait_supported[cstate_type] = 1;
printk(KERN_DEBUG "Monitor-Mwait will be used to enter C-%d "
"state\n", cx->type);
}
snprintf(cx->desc, ACPI_CX_DESC_LEN, "ACPI FFH INTEL MWAIT 0x%x",
cx->address);
out:
set_cpus_allowed_ptr(current, &saved_mask);
return retval;
}
EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_probe);
void acpi_processor_ffh_cstate_enter(struct acpi_processor_cx *cx)
{
unsigned int cpu = smp_processor_id();
struct cstate_entry *percpu_entry;
percpu_entry = per_cpu_ptr(cpu_cstate_entry, cpu);
mwait_idle_with_hints(percpu_entry->states[cx->index].eax,
percpu_entry->states[cx->index].ecx);
}
EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_enter);
static int __init ffh_cstate_init(void)
{
struct cpuinfo_x86 *c = &boot_cpu_data;
if (c->x86_vendor != X86_VENDOR_INTEL)
return -1;
cpu_cstate_entry = alloc_percpu(struct cstate_entry);
return 0;
}
static void __exit ffh_cstate_exit(void)
{
free_percpu(cpu_cstate_entry);
cpu_cstate_entry = NULL;
}
arch_initcall(ffh_cstate_init);
__exitcall(ffh_cstate_exit);