kevin/linux
1
Fork 0
Code
1333e19434
linux/drivers/ata
History
Robert Hancock 1333e19434 libata: add human-readable error value decoding 
This adds human-readable decoding of the ATA status and error registers
(similar to what drivers/ide does) as well as the SATA Serror register
to libata error handling output.  This prevents the need to pore
through standards documents to figure out the meaning of the bits
in these registers when looking at error reports.  Some bits that
drivers/ide decoded are not decoded here, since the bits are either
command-dependent or obsolete, and properly parsing them would add
too much complexity.

Signed-off-by: Robert Hancock <hancockr@shaw.ca>

[edited slightly to make output a bit more symmetric]
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12 14:55:45 -04:00
..
ahci.c ahci: implement AHCI_HFLAG_NO_PMP 2007-10-12 14:55:44 -04:00
ata_generic.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
ata_piix.c [libata] ata_piix: add HP compaq laptop to short cable list 2007-10-12 14:55:43 -04:00
Kconfig pata_ns87415: Initial cut at 87415/87560 IDE support 2007-10-12 14:55:43 -04:00
libata-acpi.c libata-pmp: extend ACPI support to cover PMP 2007-10-12 14:55:44 -04:00
libata-core.c libata-pmp: implement qc_defer for command switching PMP support 2007-10-12 14:55:44 -04:00
libata-eh.c libata: add human-readable error value decoding 2007-10-12 14:55:45 -04:00
libata-pmp.c libata-pmp: implement qc_defer for command switching PMP support 2007-10-12 14:55:44 -04:00
libata-scsi.c libata-pmp-prep: implement sata_async_notification() 2007-10-12 14:55:42 -04:00
libata-sff.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
libata.h libata-pmp: extend ACPI support to cover PMP 2007-10-12 14:55:44 -04:00
Makefile libata-pmp: implement Port Multiplier support 2007-10-12 14:55:44 -04:00
pata_ali.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_amd.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_artop.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_at32.c AVR32 PATA driver 2007-10-12 14:55:37 -04:00
pata_atiixp.c pata_atiixp: Audit notes on locking 2007-10-12 14:55:42 -04:00
pata_bf54x.c libata driver for bf548 on chip ATAPI controller. 2007-10-12 14:55:37 -04:00
pata_cmd64x.c [libata] Remove ->port_disable() hook 2007-10-12 14:55:35 -04:00
pata_cmd640.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_cs5520.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
pata_cs5530.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_cs5535.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_cypress.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_efar.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_hpt3x2n.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_hpt3x3.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
pata_hpt37x.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_hpt366.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_icside.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
pata_isapnp.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
pata_it821x.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_it8213.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_ixp4xx_cf.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
pata_jmicron.c [libata] Remove ->port_disable() hook 2007-10-12 14:55:35 -04:00
pata_legacy.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
pata_marvell.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_mpc52xx.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
pata_mpiix.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
pata_netcell.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_ns87410.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_ns87415.c pata_ns87415: Initial cut at 87415/87560 IDE support 2007-10-12 14:55:43 -04:00
pata_oldpiix.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_opti.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_optidma.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_pcmcia.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
pata_pdc202xx_old.c pata_pdc202xx_old MWDMA fixes, and notes 2007-10-12 14:55:42 -04:00
pata_pdc2027x.c pdc2027x: Switch properly to ioread/iowrite 2007-10-12 14:55:38 -04:00
pata_platform.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
pata_qdi.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
pata_radisys.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_rz1000.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_sc1200.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_scc.c libata: Fix build failure on ppc64 drivers/ata/pata_scc.c 2007-10-12 14:55:42 -04:00
pata_serverworks.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_sil680.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_sis.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_sl82c105.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_triflex.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_via.c libata: Switch most of the remaining SFF drivers to ata_sff_port_start 2007-10-12 14:55:36 -04:00
pata_winbond.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
pdc_adma.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
sata_inic162x.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
sata_mv.c libata: update ata_dev_try_classify() arguments 2007-10-12 14:55:39 -04:00
sata_nv.c libata-pmp-prep: implement ops->qc_defer() 2007-10-12 14:55:41 -04:00
sata_promise.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
sata_promise.h
sata_qstor.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
sata_sil24.c sata_sil24: implement PORT_RST 2007-10-12 14:55:44 -04:00
sata_sil.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
sata_sis.c [libata] Remove ->port_disable() hook 2007-10-12 14:55:35 -04:00
sata_svw.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
sata_sx4.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
sata_uli.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
sata_via.c sata_via: kill SATA_PATA_SHARING register handling 2007-10-12 14:55:42 -04:00
sata_vsc.c libata: implement and use ata_port_desc() to report port configuration 2007-10-12 14:55:37 -04:00
sis.h libata: PATA-mode fixes for sis_sata 2007-07-02 10:17:42 -04:00