1
linux/drivers/net/wireless/ath/ath9k/ar9003_rtt.c
Luis R. Rodriguez e01ff34edc ath9k_hw: fix sparse warnings on ar9003_rtt.c
This fixes these sparse warnings:

  CHECK   drivers/net/wireless/ath/ath9k/ar9003_rtt.c
drivers/net/wireless/ath/ath9k/ar9003_rtt.c:36:6: warning: symbol 'ar9003_hw_rtt_enable' was not declared. Should it be static?
drivers/net/wireless/ath/ath9k/ar9003_rtt.c:41:6: warning: symbol 'ar9003_hw_rtt_disable' was not declared. Should it be static?
drivers/net/wireless/ath/ath9k/ar9003_rtt.c:46:6: warning: symbol 'ar9003_hw_rtt_set_mask' was not declared. Should it be static?
drivers/net/wireless/ath/ath9k/ar9003_rtt.c:52:6: warning: symbol 'ar9003_hw_rtt_force_restore' was not declared. Should it be static?
drivers/net/wireless/ath/ath9k/ar9003_rtt.c:102:6: warning: symbol 'ar9003_hw_rtt_load_hist' was not declared. Should it be static?
drivers/net/wireless/ath/ath9k/ar9003_rtt.c:135:6: warning: symbol 'ar9003_hw_rtt_fill_hist' was not declared. Should it be static?
drivers/net/wireless/ath/ath9k/ar9003_rtt.c:143:6: warning: symbol 'ar9003_hw_rtt_clear_hist' was not declared. Should it be stati

Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04 14:30:40 -05:00

155 lines
4.3 KiB
C

/*
* Copyright (c) 2010-2011 Atheros Communications Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include "hw.h"
#include "ar9003_phy.h"
#include "ar9003_rtt.h"
#define RTT_RESTORE_TIMEOUT 1000
#define RTT_ACCESS_TIMEOUT 100
#define RTT_BAD_VALUE 0x0bad0bad
/*
* RTT (Radio Retention Table) hardware implementation information
*
* There is an internal table (i.e. the rtt) for each chain (or bank).
* Each table contains 6 entries and each entry is corresponding to
* a specific calibration parameter as depicted below.
* 0~2 - DC offset DAC calibration: loop, low, high (offsetI/Q_...)
* 3 - Filter cal (filterfc)
* 4 - RX gain settings
* 5 - Peak detector offset calibration (agc_caldac)
*/
void ar9003_hw_rtt_enable(struct ath_hw *ah)
{
REG_WRITE(ah, AR_PHY_RTT_CTRL, 1);
}
void ar9003_hw_rtt_disable(struct ath_hw *ah)
{
REG_WRITE(ah, AR_PHY_RTT_CTRL, 0);
}
void ar9003_hw_rtt_set_mask(struct ath_hw *ah, u32 rtt_mask)
{
REG_RMW_FIELD(ah, AR_PHY_RTT_CTRL,
AR_PHY_RTT_CTRL_RESTORE_MASK, rtt_mask);
}
bool ar9003_hw_rtt_force_restore(struct ath_hw *ah)
{
if (!ath9k_hw_wait(ah, AR_PHY_RTT_CTRL,
AR_PHY_RTT_CTRL_FORCE_RADIO_RESTORE,
0, RTT_RESTORE_TIMEOUT))
return false;
REG_RMW_FIELD(ah, AR_PHY_RTT_CTRL,
AR_PHY_RTT_CTRL_FORCE_RADIO_RESTORE, 1);
if (!ath9k_hw_wait(ah, AR_PHY_RTT_CTRL,
AR_PHY_RTT_CTRL_FORCE_RADIO_RESTORE,
0, RTT_RESTORE_TIMEOUT))
return false;
return true;
}
static void ar9003_hw_rtt_load_hist_entry(struct ath_hw *ah, u8 chain,
u32 index, u32 data28)
{
u32 val;
val = SM(data28, AR_PHY_RTT_SW_RTT_TABLE_DATA);
REG_WRITE(ah, AR_PHY_RTT_TABLE_SW_INTF_1_B(chain), val);
val = SM(0, AR_PHY_RTT_SW_RTT_TABLE_ACCESS) |
SM(1, AR_PHY_RTT_SW_RTT_TABLE_WRITE) |
SM(index, AR_PHY_RTT_SW_RTT_TABLE_ADDR);
REG_WRITE(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain), val);
udelay(1);
val |= SM(1, AR_PHY_RTT_SW_RTT_TABLE_ACCESS);
REG_WRITE(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain), val);
udelay(1);
if (!ath9k_hw_wait(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain),
AR_PHY_RTT_SW_RTT_TABLE_ACCESS, 0,
RTT_ACCESS_TIMEOUT))
return;
val &= ~SM(1, AR_PHY_RTT_SW_RTT_TABLE_WRITE);
REG_WRITE(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain), val);
udelay(1);
ath9k_hw_wait(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain),
AR_PHY_RTT_SW_RTT_TABLE_ACCESS, 0,
RTT_ACCESS_TIMEOUT);
}
void ar9003_hw_rtt_load_hist(struct ath_hw *ah, u8 chain, u32 *table)
{
int i;
for (i = 0; i < MAX_RTT_TABLE_ENTRY; i++)
ar9003_hw_rtt_load_hist_entry(ah, chain, i, table[i]);
}
static int ar9003_hw_rtt_fill_hist_entry(struct ath_hw *ah, u8 chain, u32 index)
{
u32 val;
val = SM(0, AR_PHY_RTT_SW_RTT_TABLE_ACCESS) |
SM(0, AR_PHY_RTT_SW_RTT_TABLE_WRITE) |
SM(index, AR_PHY_RTT_SW_RTT_TABLE_ADDR);
REG_WRITE(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain), val);
udelay(1);
val |= SM(1, AR_PHY_RTT_SW_RTT_TABLE_ACCESS);
REG_WRITE(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain), val);
udelay(1);
if (!ath9k_hw_wait(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain),
AR_PHY_RTT_SW_RTT_TABLE_ACCESS, 0,
RTT_ACCESS_TIMEOUT))
return RTT_BAD_VALUE;
val = REG_READ(ah, AR_PHY_RTT_TABLE_SW_INTF_1_B(chain));
return val;
}
void ar9003_hw_rtt_fill_hist(struct ath_hw *ah, u8 chain, u32 *table)
{
int i;
for (i = 0; i < MAX_RTT_TABLE_ENTRY; i++)
table[i] = ar9003_hw_rtt_fill_hist_entry(ah, chain, i);
}
void ar9003_hw_rtt_clear_hist(struct ath_hw *ah)
{
int i, j;
for (i = 0; i < AR9300_MAX_CHAINS; i++) {
if (!(ah->rxchainmask & (1 << i)))
continue;
for (j = 0; j < MAX_RTT_TABLE_ENTRY; j++)
ar9003_hw_rtt_load_hist_entry(ah, i, j, 0);
}
}