0e73a47f09
Improved values for some registers after Xorg Trident driver. The main problem was that values set by BIOS have been ignored. This patch completely remove random pixels ("snow") on the TGUI 9680 and 9440 (not supported yet by the driver). It does not help with the "snow" on 3DImage and Blade3D cards. There is also small improvement in timing calculations (hblank start and vblank start) Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1509 lines
35 KiB
C
1509 lines
35 KiB
C
/*
|
|
* Frame buffer driver for Trident Blade and Image series
|
|
*
|
|
* Copyright 2001, 2002 - Jani Monoses <jani@iv.ro>
|
|
*
|
|
*
|
|
* CREDITS:(in order of appearance)
|
|
* skeletonfb.c by Geert Uytterhoeven and other fb code in drivers/video
|
|
* Special thanks ;) to Mattia Crivellini <tia@mclink.it>
|
|
* much inspired by the XFree86 4.x Trident driver sources
|
|
* by Alan Hourihane the FreeVGA project
|
|
* Francesco Salvestrini <salvestrini@users.sf.net> XP support,
|
|
* code, suggestions
|
|
* TODO:
|
|
* timing value tweaking so it looks good on every monitor in every mode
|
|
* TGUI acceleration
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
|
|
#include <linux/delay.h>
|
|
#include <video/vga.h>
|
|
#include <video/trident.h>
|
|
|
|
#define VERSION "0.7.9-NEWAPI"
|
|
|
|
struct tridentfb_par {
|
|
void __iomem *io_virt; /* iospace virtual memory address */
|
|
u32 pseudo_pal[16];
|
|
int chip_id;
|
|
int flatpanel;
|
|
void (*init_accel) (struct tridentfb_par *, int, int);
|
|
void (*wait_engine) (struct tridentfb_par *);
|
|
void (*fill_rect)
|
|
(struct tridentfb_par *par, u32, u32, u32, u32, u32, u32);
|
|
void (*copy_rect)
|
|
(struct tridentfb_par *par, u32, u32, u32, u32, u32, u32);
|
|
};
|
|
|
|
static unsigned char eng_oper; /* engine operation... */
|
|
static struct fb_ops tridentfb_ops;
|
|
|
|
static struct fb_fix_screeninfo tridentfb_fix = {
|
|
.id = "Trident",
|
|
.type = FB_TYPE_PACKED_PIXELS,
|
|
.ypanstep = 1,
|
|
.visual = FB_VISUAL_PSEUDOCOLOR,
|
|
.accel = FB_ACCEL_NONE,
|
|
};
|
|
|
|
/* defaults which are normally overriden by user values */
|
|
|
|
/* video mode */
|
|
static char *mode_option __devinitdata = "640x480";
|
|
static int bpp __devinitdata = 8;
|
|
|
|
static int noaccel __devinitdata;
|
|
|
|
static int center;
|
|
static int stretch;
|
|
|
|
static int fp __devinitdata;
|
|
static int crt __devinitdata;
|
|
|
|
static int memsize __devinitdata;
|
|
static int memdiff __devinitdata;
|
|
static int nativex;
|
|
|
|
module_param(mode_option, charp, 0);
|
|
MODULE_PARM_DESC(mode_option, "Initial video mode e.g. '648x480-8@60'");
|
|
module_param_named(mode, mode_option, charp, 0);
|
|
MODULE_PARM_DESC(mode, "Initial video mode e.g. '648x480-8@60' (deprecated)");
|
|
module_param(bpp, int, 0);
|
|
module_param(center, int, 0);
|
|
module_param(stretch, int, 0);
|
|
module_param(noaccel, int, 0);
|
|
module_param(memsize, int, 0);
|
|
module_param(memdiff, int, 0);
|
|
module_param(nativex, int, 0);
|
|
module_param(fp, int, 0);
|
|
MODULE_PARM_DESC(fp, "Define if flatpanel is connected");
|
|
module_param(crt, int, 0);
|
|
MODULE_PARM_DESC(crt, "Define if CRT is connected");
|
|
|
|
static int is_oldclock(int id)
|
|
{
|
|
return (id == TGUI9660) ||
|
|
(id == CYBER9320);
|
|
}
|
|
|
|
static int is_oldprotect(int id)
|
|
{
|
|
return (id == TGUI9660) ||
|
|
(id == PROVIDIA9685) ||
|
|
(id == CYBER9320) ||
|
|
(id == CYBER9382) ||
|
|
(id == CYBER9385);
|
|
}
|
|
|
|
static int is_blade(int id)
|
|
{
|
|
return (id == BLADE3D) ||
|
|
(id == CYBERBLADEE4) ||
|
|
(id == CYBERBLADEi7) ||
|
|
(id == CYBERBLADEi7D) ||
|
|
(id == CYBERBLADEi1) ||
|
|
(id == CYBERBLADEi1D) ||
|
|
(id == CYBERBLADEAi1) ||
|
|
(id == CYBERBLADEAi1D);
|
|
}
|
|
|
|
static int is_xp(int id)
|
|
{
|
|
return (id == CYBERBLADEXPAi1) ||
|
|
(id == CYBERBLADEXPm8) ||
|
|
(id == CYBERBLADEXPm16);
|
|
}
|
|
|
|
static int is3Dchip(int id)
|
|
{
|
|
return ((id == BLADE3D) || (id == CYBERBLADEE4) ||
|
|
(id == CYBERBLADEi7) || (id == CYBERBLADEi7D) ||
|
|
(id == CYBER9397) || (id == CYBER9397DVD) ||
|
|
(id == CYBER9520) || (id == CYBER9525DVD) ||
|
|
(id == IMAGE975) || (id == IMAGE985) ||
|
|
(id == CYBERBLADEi1) || (id == CYBERBLADEi1D) ||
|
|
(id == CYBERBLADEAi1) || (id == CYBERBLADEAi1D) ||
|
|
(id == CYBERBLADEXPm8) || (id == CYBERBLADEXPm16) ||
|
|
(id == CYBERBLADEXPAi1));
|
|
}
|
|
|
|
static int iscyber(int id)
|
|
{
|
|
switch (id) {
|
|
case CYBER9388:
|
|
case CYBER9382:
|
|
case CYBER9385:
|
|
case CYBER9397:
|
|
case CYBER9397DVD:
|
|
case CYBER9520:
|
|
case CYBER9525DVD:
|
|
case CYBERBLADEE4:
|
|
case CYBERBLADEi7D:
|
|
case CYBERBLADEi1:
|
|
case CYBERBLADEi1D:
|
|
case CYBERBLADEAi1:
|
|
case CYBERBLADEAi1D:
|
|
case CYBERBLADEXPAi1:
|
|
return 1;
|
|
|
|
case CYBER9320:
|
|
case TGUI9660:
|
|
case PROVIDIA9685:
|
|
case IMAGE975:
|
|
case IMAGE985:
|
|
case BLADE3D:
|
|
case CYBERBLADEi7: /* VIA MPV4 integrated version */
|
|
|
|
default:
|
|
/* case CYBERBLDAEXPm8: Strange */
|
|
/* case CYBERBLDAEXPm16: Strange */
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static inline void t_outb(struct tridentfb_par *p, u8 val, u16 reg)
|
|
{
|
|
fb_writeb(val, p->io_virt + reg);
|
|
}
|
|
|
|
static inline u8 t_inb(struct tridentfb_par *p, u16 reg)
|
|
{
|
|
return fb_readb(p->io_virt + reg);
|
|
}
|
|
|
|
static inline void writemmr(struct tridentfb_par *par, u16 r, u32 v)
|
|
{
|
|
fb_writel(v, par->io_virt + r);
|
|
}
|
|
|
|
static inline u32 readmmr(struct tridentfb_par *par, u16 r)
|
|
{
|
|
return fb_readl(par->io_virt + r);
|
|
}
|
|
|
|
/*
|
|
* Blade specific acceleration.
|
|
*/
|
|
|
|
#define point(x, y) ((y) << 16 | (x))
|
|
#define STA 0x2120
|
|
#define CMD 0x2144
|
|
#define ROP 0x2148
|
|
#define CLR 0x2160
|
|
#define SR1 0x2100
|
|
#define SR2 0x2104
|
|
#define DR1 0x2108
|
|
#define DR2 0x210C
|
|
|
|
#define ROP_S 0xCC
|
|
|
|
static void blade_init_accel(struct tridentfb_par *par, int pitch, int bpp)
|
|
{
|
|
int v1 = (pitch >> 3) << 20;
|
|
int tmp = 0, v2;
|
|
switch (bpp) {
|
|
case 8:
|
|
tmp = 0;
|
|
break;
|
|
case 15:
|
|
tmp = 5;
|
|
break;
|
|
case 16:
|
|
tmp = 1;
|
|
break;
|
|
case 24:
|
|
case 32:
|
|
tmp = 2;
|
|
break;
|
|
}
|
|
v2 = v1 | (tmp << 29);
|
|
writemmr(par, 0x21C0, v2);
|
|
writemmr(par, 0x21C4, v2);
|
|
writemmr(par, 0x21B8, v2);
|
|
writemmr(par, 0x21BC, v2);
|
|
writemmr(par, 0x21D0, v1);
|
|
writemmr(par, 0x21D4, v1);
|
|
writemmr(par, 0x21C8, v1);
|
|
writemmr(par, 0x21CC, v1);
|
|
writemmr(par, 0x216C, 0);
|
|
}
|
|
|
|
static void blade_wait_engine(struct tridentfb_par *par)
|
|
{
|
|
while (readmmr(par, STA) & 0xFA800000) ;
|
|
}
|
|
|
|
static void blade_fill_rect(struct tridentfb_par *par,
|
|
u32 x, u32 y, u32 w, u32 h, u32 c, u32 rop)
|
|
{
|
|
writemmr(par, CLR, c);
|
|
writemmr(par, ROP, rop ? 0x66 : ROP_S);
|
|
writemmr(par, CMD, 0x20000000 | 1 << 19 | 1 << 4 | 2 << 2);
|
|
|
|
writemmr(par, DR1, point(x, y));
|
|
writemmr(par, DR2, point(x + w - 1, y + h - 1));
|
|
}
|
|
|
|
static void blade_copy_rect(struct tridentfb_par *par,
|
|
u32 x1, u32 y1, u32 x2, u32 y2, u32 w, u32 h)
|
|
{
|
|
u32 s1, s2, d1, d2;
|
|
int direction = 2;
|
|
s1 = point(x1, y1);
|
|
s2 = point(x1 + w - 1, y1 + h - 1);
|
|
d1 = point(x2, y2);
|
|
d2 = point(x2 + w - 1, y2 + h - 1);
|
|
|
|
if ((y1 > y2) || ((y1 == y2) && (x1 > x2)))
|
|
direction = 0;
|
|
|
|
writemmr(par, ROP, ROP_S);
|
|
writemmr(par, CMD, 0xE0000000 | 1 << 19 | 1 << 4 | 1 << 2 | direction);
|
|
|
|
writemmr(par, SR1, direction ? s2 : s1);
|
|
writemmr(par, SR2, direction ? s1 : s2);
|
|
writemmr(par, DR1, direction ? d2 : d1);
|
|
writemmr(par, DR2, direction ? d1 : d2);
|
|
}
|
|
|
|
/*
|
|
* BladeXP specific acceleration functions
|
|
*/
|
|
|
|
#define ROP_P 0xF0
|
|
#define masked_point(x, y) ((y & 0xffff)<<16|(x & 0xffff))
|
|
|
|
static void xp_init_accel(struct tridentfb_par *par, int pitch, int bpp)
|
|
{
|
|
int tmp = 0, v1;
|
|
unsigned char x = 0;
|
|
|
|
switch (bpp) {
|
|
case 8:
|
|
x = 0;
|
|
break;
|
|
case 16:
|
|
x = 1;
|
|
break;
|
|
case 24:
|
|
x = 3;
|
|
break;
|
|
case 32:
|
|
x = 2;
|
|
break;
|
|
}
|
|
|
|
switch (pitch << (bpp >> 3)) {
|
|
case 8192:
|
|
case 512:
|
|
x |= 0x00;
|
|
break;
|
|
case 1024:
|
|
x |= 0x04;
|
|
break;
|
|
case 2048:
|
|
x |= 0x08;
|
|
break;
|
|
case 4096:
|
|
x |= 0x0C;
|
|
break;
|
|
}
|
|
|
|
t_outb(par, x, 0x2125);
|
|
|
|
eng_oper = x | 0x40;
|
|
|
|
switch (bpp) {
|
|
case 8:
|
|
tmp = 18;
|
|
break;
|
|
case 15:
|
|
case 16:
|
|
tmp = 19;
|
|
break;
|
|
case 24:
|
|
case 32:
|
|
tmp = 20;
|
|
break;
|
|
}
|
|
|
|
v1 = pitch << tmp;
|
|
|
|
writemmr(par, 0x2154, v1);
|
|
writemmr(par, 0x2150, v1);
|
|
t_outb(par, 3, 0x2126);
|
|
}
|
|
|
|
static void xp_wait_engine(struct tridentfb_par *par)
|
|
{
|
|
int busy;
|
|
int count, timeout;
|
|
|
|
count = 0;
|
|
timeout = 0;
|
|
for (;;) {
|
|
busy = t_inb(par, STA) & 0x80;
|
|
if (busy != 0x80)
|
|
return;
|
|
count++;
|
|
if (count == 10000000) {
|
|
/* Timeout */
|
|
count = 9990000;
|
|
timeout++;
|
|
if (timeout == 8) {
|
|
/* Reset engine */
|
|
t_outb(par, 0x00, 0x2120);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static void xp_fill_rect(struct tridentfb_par *par,
|
|
u32 x, u32 y, u32 w, u32 h, u32 c, u32 rop)
|
|
{
|
|
writemmr(par, 0x2127, ROP_P);
|
|
writemmr(par, 0x2158, c);
|
|
writemmr(par, 0x2128, 0x4000);
|
|
writemmr(par, 0x2140, masked_point(h, w));
|
|
writemmr(par, 0x2138, masked_point(y, x));
|
|
t_outb(par, 0x01, 0x2124);
|
|
t_outb(par, eng_oper, 0x2125);
|
|
}
|
|
|
|
static void xp_copy_rect(struct tridentfb_par *par,
|
|
u32 x1, u32 y1, u32 x2, u32 y2, u32 w, u32 h)
|
|
{
|
|
int direction;
|
|
u32 x1_tmp, x2_tmp, y1_tmp, y2_tmp;
|
|
|
|
direction = 0x0004;
|
|
|
|
if ((x1 < x2) && (y1 == y2)) {
|
|
direction |= 0x0200;
|
|
x1_tmp = x1 + w - 1;
|
|
x2_tmp = x2 + w - 1;
|
|
} else {
|
|
x1_tmp = x1;
|
|
x2_tmp = x2;
|
|
}
|
|
|
|
if (y1 < y2) {
|
|
direction |= 0x0100;
|
|
y1_tmp = y1 + h - 1;
|
|
y2_tmp = y2 + h - 1;
|
|
} else {
|
|
y1_tmp = y1;
|
|
y2_tmp = y2;
|
|
}
|
|
|
|
writemmr(par, 0x2128, direction);
|
|
t_outb(par, ROP_S, 0x2127);
|
|
writemmr(par, 0x213C, masked_point(y1_tmp, x1_tmp));
|
|
writemmr(par, 0x2138, masked_point(y2_tmp, x2_tmp));
|
|
writemmr(par, 0x2140, masked_point(h, w));
|
|
t_outb(par, 0x01, 0x2124);
|
|
}
|
|
|
|
/*
|
|
* Image specific acceleration functions
|
|
*/
|
|
static void image_init_accel(struct tridentfb_par *par, int pitch, int bpp)
|
|
{
|
|
int tmp = 0;
|
|
switch (bpp) {
|
|
case 8:
|
|
tmp = 0;
|
|
break;
|
|
case 15:
|
|
tmp = 5;
|
|
break;
|
|
case 16:
|
|
tmp = 1;
|
|
break;
|
|
case 24:
|
|
case 32:
|
|
tmp = 2;
|
|
break;
|
|
}
|
|
writemmr(par, 0x2120, 0xF0000000);
|
|
writemmr(par, 0x2120, 0x40000000 | tmp);
|
|
writemmr(par, 0x2120, 0x80000000);
|
|
writemmr(par, 0x2144, 0x00000000);
|
|
writemmr(par, 0x2148, 0x00000000);
|
|
writemmr(par, 0x2150, 0x00000000);
|
|
writemmr(par, 0x2154, 0x00000000);
|
|
writemmr(par, 0x2120, 0x60000000 | (pitch << 16) | pitch);
|
|
writemmr(par, 0x216C, 0x00000000);
|
|
writemmr(par, 0x2170, 0x00000000);
|
|
writemmr(par, 0x217C, 0x00000000);
|
|
writemmr(par, 0x2120, 0x10000000);
|
|
writemmr(par, 0x2130, (2047 << 16) | 2047);
|
|
}
|
|
|
|
static void image_wait_engine(struct tridentfb_par *par)
|
|
{
|
|
while (readmmr(par, 0x2164) & 0xF0000000) ;
|
|
}
|
|
|
|
static void image_fill_rect(struct tridentfb_par *par,
|
|
u32 x, u32 y, u32 w, u32 h, u32 c, u32 rop)
|
|
{
|
|
writemmr(par, 0x2120, 0x80000000);
|
|
writemmr(par, 0x2120, 0x90000000 | ROP_S);
|
|
|
|
writemmr(par, 0x2144, c);
|
|
|
|
writemmr(par, DR1, point(x, y));
|
|
writemmr(par, DR2, point(x + w - 1, y + h - 1));
|
|
|
|
writemmr(par, 0x2124, 0x80000000 | 3 << 22 | 1 << 10 | 1 << 9);
|
|
}
|
|
|
|
static void image_copy_rect(struct tridentfb_par *par,
|
|
u32 x1, u32 y1, u32 x2, u32 y2, u32 w, u32 h)
|
|
{
|
|
u32 s1, s2, d1, d2;
|
|
int direction = 2;
|
|
s1 = point(x1, y1);
|
|
s2 = point(x1 + w - 1, y1 + h - 1);
|
|
d1 = point(x2, y2);
|
|
d2 = point(x2 + w - 1, y2 + h - 1);
|
|
|
|
if ((y1 > y2) || ((y1 == y2) && (x1 > x2)))
|
|
direction = 0;
|
|
|
|
writemmr(par, 0x2120, 0x80000000);
|
|
writemmr(par, 0x2120, 0x90000000 | ROP_S);
|
|
|
|
writemmr(par, SR1, direction ? s2 : s1);
|
|
writemmr(par, SR2, direction ? s1 : s2);
|
|
writemmr(par, DR1, direction ? d2 : d1);
|
|
writemmr(par, DR2, direction ? d1 : d2);
|
|
writemmr(par, 0x2124,
|
|
0x80000000 | 1 << 22 | 1 << 10 | 1 << 7 | direction);
|
|
}
|
|
|
|
/*
|
|
* Accel functions called by the upper layers
|
|
*/
|
|
#ifdef CONFIG_FB_TRIDENT_ACCEL
|
|
static void tridentfb_fillrect(struct fb_info *info,
|
|
const struct fb_fillrect *fr)
|
|
{
|
|
struct tridentfb_par *par = info->par;
|
|
int bpp = info->var.bits_per_pixel;
|
|
int col = 0;
|
|
|
|
switch (bpp) {
|
|
default:
|
|
case 8:
|
|
col |= fr->color;
|
|
col |= col << 8;
|
|
col |= col << 16;
|
|
break;
|
|
case 16:
|
|
col = ((u32 *)(info->pseudo_palette))[fr->color];
|
|
break;
|
|
case 32:
|
|
col = ((u32 *)(info->pseudo_palette))[fr->color];
|
|
break;
|
|
}
|
|
|
|
par->fill_rect(par, fr->dx, fr->dy, fr->width,
|
|
fr->height, col, fr->rop);
|
|
par->wait_engine(par);
|
|
}
|
|
static void tridentfb_copyarea(struct fb_info *info,
|
|
const struct fb_copyarea *ca)
|
|
{
|
|
struct tridentfb_par *par = info->par;
|
|
|
|
par->copy_rect(par, ca->sx, ca->sy, ca->dx, ca->dy,
|
|
ca->width, ca->height);
|
|
par->wait_engine(par);
|
|
}
|
|
#else /* !CONFIG_FB_TRIDENT_ACCEL */
|
|
#define tridentfb_fillrect cfb_fillrect
|
|
#define tridentfb_copyarea cfb_copyarea
|
|
#endif /* CONFIG_FB_TRIDENT_ACCEL */
|
|
|
|
|
|
/*
|
|
* Hardware access functions
|
|
*/
|
|
|
|
static inline unsigned char read3X4(struct tridentfb_par *par, int reg)
|
|
{
|
|
return vga_mm_rcrt(par->io_virt, reg);
|
|
}
|
|
|
|
static inline void write3X4(struct tridentfb_par *par, int reg,
|
|
unsigned char val)
|
|
{
|
|
vga_mm_wcrt(par->io_virt, reg, val);
|
|
}
|
|
|
|
static inline unsigned char read3CE(struct tridentfb_par *par,
|
|
unsigned char reg)
|
|
{
|
|
return vga_mm_rgfx(par->io_virt, reg);
|
|
}
|
|
|
|
static inline void writeAttr(struct tridentfb_par *par, int reg,
|
|
unsigned char val)
|
|
{
|
|
fb_readb(par->io_virt + VGA_IS1_RC); /* flip-flop to index */
|
|
vga_mm_wattr(par->io_virt, reg, val);
|
|
}
|
|
|
|
static inline void write3CE(struct tridentfb_par *par, int reg,
|
|
unsigned char val)
|
|
{
|
|
vga_mm_wgfx(par->io_virt, reg, val);
|
|
}
|
|
|
|
static void enable_mmio(void)
|
|
{
|
|
/* Goto New Mode */
|
|
vga_io_rseq(0x0B);
|
|
|
|
/* Unprotect registers */
|
|
vga_io_wseq(NewMode1, 0x80);
|
|
|
|
/* Enable MMIO */
|
|
outb(PCIReg, 0x3D4);
|
|
outb(inb(0x3D5) | 0x01, 0x3D5);
|
|
}
|
|
|
|
static void disable_mmio(struct tridentfb_par *par)
|
|
{
|
|
/* Goto New Mode */
|
|
vga_mm_rseq(par->io_virt, 0x0B);
|
|
|
|
/* Unprotect registers */
|
|
vga_mm_wseq(par->io_virt, NewMode1, 0x80);
|
|
|
|
/* Disable MMIO */
|
|
t_outb(par, PCIReg, 0x3D4);
|
|
t_outb(par, t_inb(par, 0x3D5) & ~0x01, 0x3D5);
|
|
}
|
|
|
|
static void crtc_unlock(struct tridentfb_par *par)
|
|
{
|
|
write3X4(par, VGA_CRTC_V_SYNC_END,
|
|
read3X4(par, VGA_CRTC_V_SYNC_END) & 0x7F);
|
|
}
|
|
|
|
/* Return flat panel's maximum x resolution */
|
|
static int __devinit get_nativex(struct tridentfb_par *par)
|
|
{
|
|
int x, y, tmp;
|
|
|
|
if (nativex)
|
|
return nativex;
|
|
|
|
tmp = (read3CE(par, VertStretch) >> 4) & 3;
|
|
|
|
switch (tmp) {
|
|
case 0:
|
|
x = 1280; y = 1024;
|
|
break;
|
|
case 2:
|
|
x = 1024; y = 768;
|
|
break;
|
|
case 3:
|
|
x = 800; y = 600;
|
|
break;
|
|
case 4:
|
|
x = 1400; y = 1050;
|
|
break;
|
|
case 1:
|
|
default:
|
|
x = 640; y = 480;
|
|
break;
|
|
}
|
|
|
|
output("%dx%d flat panel found\n", x, y);
|
|
return x;
|
|
}
|
|
|
|
/* Set pitch */
|
|
static void set_lwidth(struct tridentfb_par *par, int width)
|
|
{
|
|
write3X4(par, VGA_CRTC_OFFSET, width & 0xFF);
|
|
write3X4(par, AddColReg,
|
|
(read3X4(par, AddColReg) & 0xCF) | ((width & 0x300) >> 4));
|
|
}
|
|
|
|
/* For resolutions smaller than FP resolution stretch */
|
|
static void screen_stretch(struct tridentfb_par *par)
|
|
{
|
|
if (par->chip_id != CYBERBLADEXPAi1)
|
|
write3CE(par, BiosReg, 0);
|
|
else
|
|
write3CE(par, BiosReg, 8);
|
|
write3CE(par, VertStretch, (read3CE(par, VertStretch) & 0x7C) | 1);
|
|
write3CE(par, HorStretch, (read3CE(par, HorStretch) & 0x7C) | 1);
|
|
}
|
|
|
|
/* For resolutions smaller than FP resolution center */
|
|
static void screen_center(struct tridentfb_par *par)
|
|
{
|
|
write3CE(par, VertStretch, (read3CE(par, VertStretch) & 0x7C) | 0x80);
|
|
write3CE(par, HorStretch, (read3CE(par, HorStretch) & 0x7C) | 0x80);
|
|
}
|
|
|
|
/* Address of first shown pixel in display memory */
|
|
static void set_screen_start(struct tridentfb_par *par, int base)
|
|
{
|
|
u8 tmp;
|
|
write3X4(par, VGA_CRTC_START_LO, base & 0xFF);
|
|
write3X4(par, VGA_CRTC_START_HI, (base & 0xFF00) >> 8);
|
|
tmp = read3X4(par, CRTCModuleTest) & 0xDF;
|
|
write3X4(par, CRTCModuleTest, tmp | ((base & 0x10000) >> 11));
|
|
tmp = read3X4(par, CRTHiOrd) & 0xF8;
|
|
write3X4(par, CRTHiOrd, tmp | ((base & 0xE0000) >> 17));
|
|
}
|
|
|
|
/* Set dotclock frequency */
|
|
static void set_vclk(struct tridentfb_par *par, unsigned long freq)
|
|
{
|
|
int m, n, k;
|
|
unsigned long fi, d, di;
|
|
unsigned char best_m = 0, best_n = 0, best_k = 0;
|
|
unsigned char hi, lo;
|
|
|
|
d = 20000;
|
|
for (k = 1; k >= 0; k--)
|
|
for (m = 0; m < 32; m++)
|
|
for (n = 0; n < 122; n++) {
|
|
fi = ((14318l * (n + 8)) / (m + 2)) >> k;
|
|
if ((di = abs(fi - freq)) < d) {
|
|
d = di;
|
|
best_n = n;
|
|
best_m = m;
|
|
best_k = k;
|
|
}
|
|
if (fi > freq)
|
|
break;
|
|
}
|
|
|
|
if (is_oldclock(par->chip_id)) {
|
|
lo = best_n | (best_m << 7);
|
|
hi = (best_m >> 1) | (best_k << 4);
|
|
} else {
|
|
lo = best_n;
|
|
hi = best_m | (best_k << 6);
|
|
}
|
|
|
|
if (is3Dchip(par->chip_id)) {
|
|
vga_mm_wseq(par->io_virt, ClockHigh, hi);
|
|
vga_mm_wseq(par->io_virt, ClockLow, lo);
|
|
} else {
|
|
t_outb(par, lo, 0x43C8);
|
|
t_outb(par, hi, 0x43C9);
|
|
}
|
|
debug("VCLK = %X %X\n", hi, lo);
|
|
}
|
|
|
|
/* Set number of lines for flat panels*/
|
|
static void set_number_of_lines(struct tridentfb_par *par, int lines)
|
|
{
|
|
int tmp = read3CE(par, CyberEnhance) & 0x8F;
|
|
if (lines > 1024)
|
|
tmp |= 0x50;
|
|
else if (lines > 768)
|
|
tmp |= 0x30;
|
|
else if (lines > 600)
|
|
tmp |= 0x20;
|
|
else if (lines > 480)
|
|
tmp |= 0x10;
|
|
write3CE(par, CyberEnhance, tmp);
|
|
}
|
|
|
|
/*
|
|
* If we see that FP is active we assume we have one.
|
|
* Otherwise we have a CRT display. User can override.
|
|
*/
|
|
static int __devinit is_flatpanel(struct tridentfb_par *par)
|
|
{
|
|
if (fp)
|
|
return 1;
|
|
if (crt || !iscyber(par->chip_id))
|
|
return 0;
|
|
return (read3CE(par, FPConfig) & 0x10) ? 1 : 0;
|
|
}
|
|
|
|
/* Try detecting the video memory size */
|
|
static unsigned int __devinit get_memsize(struct tridentfb_par *par)
|
|
{
|
|
unsigned char tmp, tmp2;
|
|
unsigned int k;
|
|
|
|
/* If memory size provided by user */
|
|
if (memsize)
|
|
k = memsize * Kb;
|
|
else
|
|
switch (par->chip_id) {
|
|
case CYBER9525DVD:
|
|
k = 2560 * Kb;
|
|
break;
|
|
default:
|
|
tmp = read3X4(par, SPR) & 0x0F;
|
|
switch (tmp) {
|
|
|
|
case 0x01:
|
|
k = 512 * Kb;
|
|
break;
|
|
case 0x02:
|
|
k = 6 * Mb; /* XP */
|
|
break;
|
|
case 0x03:
|
|
k = 1 * Mb;
|
|
break;
|
|
case 0x04:
|
|
k = 8 * Mb;
|
|
break;
|
|
case 0x06:
|
|
k = 10 * Mb; /* XP */
|
|
break;
|
|
case 0x07:
|
|
k = 2 * Mb;
|
|
break;
|
|
case 0x08:
|
|
k = 12 * Mb; /* XP */
|
|
break;
|
|
case 0x0A:
|
|
k = 14 * Mb; /* XP */
|
|
break;
|
|
case 0x0C:
|
|
k = 16 * Mb; /* XP */
|
|
break;
|
|
case 0x0E: /* XP */
|
|
|
|
tmp2 = vga_mm_rseq(par->io_virt, 0xC1);
|
|
switch (tmp2) {
|
|
case 0x00:
|
|
k = 20 * Mb;
|
|
break;
|
|
case 0x01:
|
|
k = 24 * Mb;
|
|
break;
|
|
case 0x10:
|
|
k = 28 * Mb;
|
|
break;
|
|
case 0x11:
|
|
k = 32 * Mb;
|
|
break;
|
|
default:
|
|
k = 1 * Mb;
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case 0x0F:
|
|
k = 4 * Mb;
|
|
break;
|
|
default:
|
|
k = 1 * Mb;
|
|
break;
|
|
}
|
|
}
|
|
|
|
k -= memdiff * Kb;
|
|
output("framebuffer size = %d Kb\n", k / Kb);
|
|
return k;
|
|
}
|
|
|
|
/* See if we can handle the video mode described in var */
|
|
static int tridentfb_check_var(struct fb_var_screeninfo *var,
|
|
struct fb_info *info)
|
|
{
|
|
struct tridentfb_par *par = info->par;
|
|
int bpp = var->bits_per_pixel;
|
|
debug("enter\n");
|
|
|
|
/* check color depth */
|
|
if (bpp == 24)
|
|
bpp = var->bits_per_pixel = 32;
|
|
/* check whether resolution fits on panel and in memory */
|
|
if (par->flatpanel && nativex && var->xres > nativex)
|
|
return -EINVAL;
|
|
if (var->xres * var->yres_virtual * bpp / 8 > info->fix.smem_len)
|
|
return -EINVAL;
|
|
|
|
switch (bpp) {
|
|
case 8:
|
|
var->red.offset = 0;
|
|
var->green.offset = 0;
|
|
var->blue.offset = 0;
|
|
var->red.length = 6;
|
|
var->green.length = 6;
|
|
var->blue.length = 6;
|
|
break;
|
|
case 16:
|
|
var->red.offset = 11;
|
|
var->green.offset = 5;
|
|
var->blue.offset = 0;
|
|
var->red.length = 5;
|
|
var->green.length = 6;
|
|
var->blue.length = 5;
|
|
break;
|
|
case 32:
|
|
var->red.offset = 16;
|
|
var->green.offset = 8;
|
|
var->blue.offset = 0;
|
|
var->red.length = 8;
|
|
var->green.length = 8;
|
|
var->blue.length = 8;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
debug("exit\n");
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
/* Pan the display */
|
|
static int tridentfb_pan_display(struct fb_var_screeninfo *var,
|
|
struct fb_info *info)
|
|
{
|
|
struct tridentfb_par *par = info->par;
|
|
unsigned int offset;
|
|
|
|
debug("enter\n");
|
|
offset = (var->xoffset + (var->yoffset * var->xres))
|
|
* var->bits_per_pixel / 32;
|
|
info->var.xoffset = var->xoffset;
|
|
info->var.yoffset = var->yoffset;
|
|
set_screen_start(par, offset);
|
|
debug("exit\n");
|
|
return 0;
|
|
}
|
|
|
|
static void shadowmode_on(struct tridentfb_par *par)
|
|
{
|
|
write3CE(par, CyberControl, read3CE(par, CyberControl) | 0x81);
|
|
}
|
|
|
|
static void shadowmode_off(struct tridentfb_par *par)
|
|
{
|
|
write3CE(par, CyberControl, read3CE(par, CyberControl) & 0x7E);
|
|
}
|
|
|
|
/* Set the hardware to the requested video mode */
|
|
static int tridentfb_set_par(struct fb_info *info)
|
|
{
|
|
struct tridentfb_par *par = (struct tridentfb_par *)(info->par);
|
|
u32 htotal, hdispend, hsyncstart, hsyncend, hblankstart, hblankend;
|
|
u32 vtotal, vdispend, vsyncstart, vsyncend, vblankstart, vblankend;
|
|
struct fb_var_screeninfo *var = &info->var;
|
|
int bpp = var->bits_per_pixel;
|
|
unsigned char tmp;
|
|
unsigned long vclk;
|
|
|
|
debug("enter\n");
|
|
hdispend = var->xres / 8 - 1;
|
|
hsyncstart = (var->xres + var->right_margin) / 8 - 1;
|
|
hsyncend = (var->xres + var->right_margin + var->hsync_len) / 8 - 1;
|
|
htotal = (var->xres + var->left_margin + var->right_margin +
|
|
var->hsync_len) / 8 - 5;
|
|
hblankstart = hdispend + 1;
|
|
hblankend = htotal + 3;
|
|
|
|
vdispend = var->yres - 1;
|
|
vsyncstart = var->yres + var->lower_margin;
|
|
vsyncend = vsyncstart + var->vsync_len;
|
|
vtotal = var->upper_margin + vsyncend - 2;
|
|
vblankstart = vdispend + 1;
|
|
vblankend = vtotal;
|
|
|
|
crtc_unlock(par);
|
|
write3CE(par, CyberControl, 8);
|
|
|
|
if (par->flatpanel && var->xres < nativex) {
|
|
/*
|
|
* on flat panels with native size larger
|
|
* than requested resolution decide whether
|
|
* we stretch or center
|
|
*/
|
|
t_outb(par, 0xEB, VGA_MIS_W);
|
|
|
|
shadowmode_on(par);
|
|
|
|
if (center)
|
|
screen_center(par);
|
|
else if (stretch)
|
|
screen_stretch(par);
|
|
|
|
} else {
|
|
t_outb(par, 0x2B, VGA_MIS_W);
|
|
write3CE(par, CyberControl, 8);
|
|
}
|
|
|
|
/* vertical timing values */
|
|
write3X4(par, VGA_CRTC_V_TOTAL, vtotal & 0xFF);
|
|
write3X4(par, VGA_CRTC_V_DISP_END, vdispend & 0xFF);
|
|
write3X4(par, VGA_CRTC_V_SYNC_START, vsyncstart & 0xFF);
|
|
write3X4(par, VGA_CRTC_V_SYNC_END, (vsyncend & 0x0F));
|
|
write3X4(par, VGA_CRTC_V_BLANK_START, vblankstart & 0xFF);
|
|
write3X4(par, VGA_CRTC_V_BLANK_END, vblankend & 0xFF);
|
|
|
|
/* horizontal timing values */
|
|
write3X4(par, VGA_CRTC_H_TOTAL, htotal & 0xFF);
|
|
write3X4(par, VGA_CRTC_H_DISP, hdispend & 0xFF);
|
|
write3X4(par, VGA_CRTC_H_SYNC_START, hsyncstart & 0xFF);
|
|
write3X4(par, VGA_CRTC_H_SYNC_END,
|
|
(hsyncend & 0x1F) | ((hblankend & 0x20) << 2));
|
|
write3X4(par, VGA_CRTC_H_BLANK_START, hblankstart & 0xFF);
|
|
write3X4(par, VGA_CRTC_H_BLANK_END, hblankend & 0x1F);
|
|
|
|
/* higher bits of vertical timing values */
|
|
tmp = 0x10;
|
|
if (vtotal & 0x100) tmp |= 0x01;
|
|
if (vdispend & 0x100) tmp |= 0x02;
|
|
if (vsyncstart & 0x100) tmp |= 0x04;
|
|
if (vblankstart & 0x100) tmp |= 0x08;
|
|
|
|
if (vtotal & 0x200) tmp |= 0x20;
|
|
if (vdispend & 0x200) tmp |= 0x40;
|
|
if (vsyncstart & 0x200) tmp |= 0x80;
|
|
write3X4(par, VGA_CRTC_OVERFLOW, tmp);
|
|
|
|
tmp = read3X4(par, CRTHiOrd) & 0x07;
|
|
tmp |= 0x08; /* line compare bit 10 */
|
|
if (vtotal & 0x400) tmp |= 0x80;
|
|
if (vblankstart & 0x400) tmp |= 0x40;
|
|
if (vsyncstart & 0x400) tmp |= 0x20;
|
|
if (vdispend & 0x400) tmp |= 0x10;
|
|
write3X4(par, CRTHiOrd, tmp);
|
|
|
|
tmp = (htotal >> 8) & 0x01;
|
|
tmp |= (hdispend >> 7) & 0x02;
|
|
tmp |= (hsyncstart >> 5) & 0x08;
|
|
tmp |= (hblankstart >> 4) & 0x10;
|
|
write3X4(par, HorizOverflow, tmp);
|
|
|
|
tmp = 0x40;
|
|
if (vblankstart & 0x200) tmp |= 0x20;
|
|
//FIXME if (info->var.vmode & FB_VMODE_DOUBLE) tmp |= 0x80; /* double scan for 200 line modes */
|
|
write3X4(par, VGA_CRTC_MAX_SCAN, tmp);
|
|
|
|
write3X4(par, VGA_CRTC_LINE_COMPARE, 0xFF);
|
|
write3X4(par, VGA_CRTC_PRESET_ROW, 0);
|
|
write3X4(par, VGA_CRTC_MODE, 0xC3);
|
|
|
|
write3X4(par, LinearAddReg, 0x20); /* enable linear addressing */
|
|
|
|
tmp = (info->var.vmode & FB_VMODE_INTERLACED) ? 0x84 : 0x80;
|
|
/* enable access extended memory */
|
|
write3X4(par, CRTCModuleTest, tmp);
|
|
|
|
/* enable GE for text acceleration */
|
|
write3X4(par, GraphEngReg, 0x80);
|
|
|
|
#ifdef CONFIG_FB_TRIDENT_ACCEL
|
|
par->init_accel(par, info->var.xres, bpp);
|
|
#endif
|
|
|
|
switch (bpp) {
|
|
case 8:
|
|
tmp = 0x00;
|
|
break;
|
|
case 16:
|
|
tmp = 0x05;
|
|
break;
|
|
case 24:
|
|
tmp = 0x29;
|
|
break;
|
|
case 32:
|
|
tmp = 0x09;
|
|
break;
|
|
}
|
|
|
|
write3X4(par, PixelBusReg, tmp);
|
|
|
|
tmp = read3X4(par, DRAMControl);
|
|
if (!is_oldprotect(par->chip_id))
|
|
tmp |= 0x10;
|
|
if (iscyber(par->chip_id))
|
|
tmp |= 0x20;
|
|
write3X4(par, DRAMControl, tmp); /* both IO, linear enable */
|
|
|
|
write3X4(par, InterfaceSel, read3X4(par, InterfaceSel) | 0x40);
|
|
if (!is_xp(par->chip_id))
|
|
write3X4(par, Performance, read3X4(par, Performance) | 0x10);
|
|
/* MMIO & PCI read and write burst enable */
|
|
write3X4(par, PCIReg, read3X4(par, PCIReg) | 0x06);
|
|
|
|
/* convert from picoseconds to kHz */
|
|
vclk = PICOS2KHZ(info->var.pixclock);
|
|
if (bpp == 32)
|
|
vclk *= 2;
|
|
set_vclk(par, vclk);
|
|
|
|
vga_mm_wseq(par->io_virt, 0, 3);
|
|
vga_mm_wseq(par->io_virt, 1, 1); /* set char clock 8 dots wide */
|
|
/* enable 4 maps because needed in chain4 mode */
|
|
vga_mm_wseq(par->io_virt, 2, 0x0F);
|
|
vga_mm_wseq(par->io_virt, 3, 0);
|
|
vga_mm_wseq(par->io_virt, 4, 0x0E); /* memory mode enable bitmaps ?? */
|
|
|
|
/* divide clock by 2 if 32bpp chain4 mode display and CPU path */
|
|
write3CE(par, MiscExtFunc, (bpp == 32) ? 0x1A : 0x12);
|
|
write3CE(par, 0x5, 0x40); /* no CGA compat, allow 256 col */
|
|
write3CE(par, 0x6, 0x05); /* graphics mode */
|
|
write3CE(par, 0x7, 0x0F); /* planes? */
|
|
|
|
if (par->chip_id == CYBERBLADEXPAi1) {
|
|
/* This fixes snow-effect in 32 bpp */
|
|
write3X4(par, VGA_CRTC_H_SYNC_START, 0x84);
|
|
}
|
|
|
|
/* graphics mode and support 256 color modes */
|
|
writeAttr(par, 0x10, 0x41);
|
|
writeAttr(par, 0x12, 0x0F); /* planes */
|
|
writeAttr(par, 0x13, 0); /* horizontal pel panning */
|
|
|
|
/* colors */
|
|
for (tmp = 0; tmp < 0x10; tmp++)
|
|
writeAttr(par, tmp, tmp);
|
|
fb_readb(par->io_virt + VGA_IS1_RC); /* flip-flop to index */
|
|
t_outb(par, 0x20, VGA_ATT_W); /* enable attr */
|
|
|
|
switch (bpp) {
|
|
case 8:
|
|
tmp = 0;
|
|
break;
|
|
case 15:
|
|
tmp = 0x10;
|
|
break;
|
|
case 16:
|
|
tmp = 0x30;
|
|
break;
|
|
case 24:
|
|
case 32:
|
|
tmp = 0xD0;
|
|
break;
|
|
}
|
|
|
|
t_inb(par, VGA_PEL_IW);
|
|
t_inb(par, VGA_PEL_MSK);
|
|
t_inb(par, VGA_PEL_MSK);
|
|
t_inb(par, VGA_PEL_MSK);
|
|
t_inb(par, VGA_PEL_MSK);
|
|
t_outb(par, tmp, VGA_PEL_MSK);
|
|
t_inb(par, VGA_PEL_IW);
|
|
|
|
if (par->flatpanel)
|
|
set_number_of_lines(par, info->var.yres);
|
|
set_lwidth(par, info->var.xres * bpp / (4 * 16));
|
|
info->fix.visual = (bpp == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
|
|
info->fix.line_length = info->var.xres * (bpp >> 3);
|
|
info->cmap.len = (bpp == 8) ? 256 : 16;
|
|
debug("exit\n");
|
|
return 0;
|
|
}
|
|
|
|
/* Set one color register */
|
|
static int tridentfb_setcolreg(unsigned regno, unsigned red, unsigned green,
|
|
unsigned blue, unsigned transp,
|
|
struct fb_info *info)
|
|
{
|
|
int bpp = info->var.bits_per_pixel;
|
|
struct tridentfb_par *par = info->par;
|
|
|
|
if (regno >= info->cmap.len)
|
|
return 1;
|
|
|
|
if (bpp == 8) {
|
|
t_outb(par, 0xFF, VGA_PEL_MSK);
|
|
t_outb(par, regno, VGA_PEL_IW);
|
|
|
|
t_outb(par, red >> 10, VGA_PEL_D);
|
|
t_outb(par, green >> 10, VGA_PEL_D);
|
|
t_outb(par, blue >> 10, VGA_PEL_D);
|
|
|
|
} else if (regno < 16) {
|
|
if (bpp == 16) { /* RGB 565 */
|
|
u32 col;
|
|
|
|
col = (red & 0xF800) | ((green & 0xFC00) >> 5) |
|
|
((blue & 0xF800) >> 11);
|
|
col |= col << 16;
|
|
((u32 *)(info->pseudo_palette))[regno] = col;
|
|
} else if (bpp == 32) /* ARGB 8888 */
|
|
((u32*)info->pseudo_palette)[regno] =
|
|
((transp & 0xFF00) << 16) |
|
|
((red & 0xFF00) << 8) |
|
|
((green & 0xFF00)) |
|
|
((blue & 0xFF00) >> 8);
|
|
}
|
|
|
|
/* debug("exit\n"); */
|
|
return 0;
|
|
}
|
|
|
|
/* Try blanking the screen.For flat panels it does nothing */
|
|
static int tridentfb_blank(int blank_mode, struct fb_info *info)
|
|
{
|
|
unsigned char PMCont, DPMSCont;
|
|
struct tridentfb_par *par = info->par;
|
|
|
|
debug("enter\n");
|
|
if (par->flatpanel)
|
|
return 0;
|
|
t_outb(par, 0x04, 0x83C8); /* Read DPMS Control */
|
|
PMCont = t_inb(par, 0x83C6) & 0xFC;
|
|
DPMSCont = read3CE(par, PowerStatus) & 0xFC;
|
|
switch (blank_mode) {
|
|
case FB_BLANK_UNBLANK:
|
|
/* Screen: On, HSync: On, VSync: On */
|
|
case FB_BLANK_NORMAL:
|
|
/* Screen: Off, HSync: On, VSync: On */
|
|
PMCont |= 0x03;
|
|
DPMSCont |= 0x00;
|
|
break;
|
|
case FB_BLANK_HSYNC_SUSPEND:
|
|
/* Screen: Off, HSync: Off, VSync: On */
|
|
PMCont |= 0x02;
|
|
DPMSCont |= 0x01;
|
|
break;
|
|
case FB_BLANK_VSYNC_SUSPEND:
|
|
/* Screen: Off, HSync: On, VSync: Off */
|
|
PMCont |= 0x02;
|
|
DPMSCont |= 0x02;
|
|
break;
|
|
case FB_BLANK_POWERDOWN:
|
|
/* Screen: Off, HSync: Off, VSync: Off */
|
|
PMCont |= 0x00;
|
|
DPMSCont |= 0x03;
|
|
break;
|
|
}
|
|
|
|
write3CE(par, PowerStatus, DPMSCont);
|
|
t_outb(par, 4, 0x83C8);
|
|
t_outb(par, PMCont, 0x83C6);
|
|
|
|
debug("exit\n");
|
|
|
|
/* let fbcon do a softblank for us */
|
|
return (blank_mode == FB_BLANK_NORMAL) ? 1 : 0;
|
|
}
|
|
|
|
static struct fb_ops tridentfb_ops = {
|
|
.owner = THIS_MODULE,
|
|
.fb_setcolreg = tridentfb_setcolreg,
|
|
.fb_pan_display = tridentfb_pan_display,
|
|
.fb_blank = tridentfb_blank,
|
|
.fb_check_var = tridentfb_check_var,
|
|
.fb_set_par = tridentfb_set_par,
|
|
.fb_fillrect = tridentfb_fillrect,
|
|
.fb_copyarea = tridentfb_copyarea,
|
|
.fb_imageblit = cfb_imageblit,
|
|
};
|
|
|
|
static int __devinit trident_pci_probe(struct pci_dev *dev,
|
|
const struct pci_device_id *id)
|
|
{
|
|
int err;
|
|
unsigned char revision;
|
|
struct fb_info *info;
|
|
struct tridentfb_par *default_par;
|
|
int defaultaccel;
|
|
int chip3D;
|
|
int chip_id;
|
|
|
|
err = pci_enable_device(dev);
|
|
if (err)
|
|
return err;
|
|
|
|
info = framebuffer_alloc(sizeof(struct tridentfb_par), &dev->dev);
|
|
if (!info)
|
|
return -ENOMEM;
|
|
default_par = info->par;
|
|
|
|
chip_id = id->device;
|
|
|
|
if (chip_id == CYBERBLADEi1)
|
|
output("*** Please do use cyblafb, Cyberblade/i1 support "
|
|
"will soon be removed from tridentfb!\n");
|
|
|
|
|
|
/* If PCI id is 0x9660 then further detect chip type */
|
|
|
|
if (chip_id == TGUI9660) {
|
|
revision = vga_io_rseq(RevisionID);
|
|
|
|
switch (revision) {
|
|
case 0x21:
|
|
chip_id = PROVIDIA9685;
|
|
break;
|
|
case 0x22:
|
|
case 0x23:
|
|
chip_id = CYBER9397;
|
|
break;
|
|
case 0x2A:
|
|
chip_id = CYBER9397DVD;
|
|
break;
|
|
case 0x30:
|
|
case 0x33:
|
|
case 0x34:
|
|
case 0x35:
|
|
case 0x38:
|
|
case 0x3A:
|
|
case 0xB3:
|
|
chip_id = CYBER9385;
|
|
break;
|
|
case 0x40 ... 0x43:
|
|
chip_id = CYBER9382;
|
|
break;
|
|
case 0x4A:
|
|
chip_id = CYBER9388;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
chip3D = is3Dchip(chip_id);
|
|
|
|
if (is_xp(chip_id)) {
|
|
default_par->init_accel = xp_init_accel;
|
|
default_par->wait_engine = xp_wait_engine;
|
|
default_par->fill_rect = xp_fill_rect;
|
|
default_par->copy_rect = xp_copy_rect;
|
|
} else if (is_blade(chip_id)) {
|
|
default_par->init_accel = blade_init_accel;
|
|
default_par->wait_engine = blade_wait_engine;
|
|
default_par->fill_rect = blade_fill_rect;
|
|
default_par->copy_rect = blade_copy_rect;
|
|
} else {
|
|
default_par->init_accel = image_init_accel;
|
|
default_par->wait_engine = image_wait_engine;
|
|
default_par->fill_rect = image_fill_rect;
|
|
default_par->copy_rect = image_copy_rect;
|
|
}
|
|
|
|
default_par->chip_id = chip_id;
|
|
|
|
/* acceleration is on by default for 3D chips */
|
|
defaultaccel = chip3D && !noaccel;
|
|
|
|
/* setup MMIO region */
|
|
tridentfb_fix.mmio_start = pci_resource_start(dev, 1);
|
|
tridentfb_fix.mmio_len = chip3D ? 0x20000 : 0x10000;
|
|
|
|
if (!request_mem_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len, "tridentfb")) {
|
|
debug("request_region failed!\n");
|
|
framebuffer_release(info);
|
|
return -1;
|
|
}
|
|
|
|
default_par->io_virt = ioremap_nocache(tridentfb_fix.mmio_start,
|
|
tridentfb_fix.mmio_len);
|
|
|
|
if (!default_par->io_virt) {
|
|
debug("ioremap failed\n");
|
|
err = -1;
|
|
goto out_unmap1;
|
|
}
|
|
|
|
/* setup framebuffer memory */
|
|
tridentfb_fix.smem_start = pci_resource_start(dev, 0);
|
|
tridentfb_fix.smem_len = get_memsize(default_par);
|
|
|
|
if (!request_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len, "tridentfb")) {
|
|
debug("request_mem_region failed!\n");
|
|
disable_mmio(info->par);
|
|
err = -1;
|
|
goto out_unmap1;
|
|
}
|
|
|
|
enable_mmio();
|
|
|
|
info->screen_base = ioremap_nocache(tridentfb_fix.smem_start,
|
|
tridentfb_fix.smem_len);
|
|
|
|
if (!info->screen_base) {
|
|
debug("ioremap failed\n");
|
|
err = -1;
|
|
goto out_unmap2;
|
|
}
|
|
|
|
output("%s board found\n", pci_name(dev));
|
|
default_par->flatpanel = is_flatpanel(default_par);
|
|
|
|
if (default_par->flatpanel)
|
|
nativex = get_nativex(default_par);
|
|
|
|
info->fix = tridentfb_fix;
|
|
info->fbops = &tridentfb_ops;
|
|
|
|
|
|
info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
|
|
#ifdef CONFIG_FB_TRIDENT_ACCEL
|
|
info->flags |= FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT;
|
|
#endif
|
|
if (!fb_find_mode(&info->var, info,
|
|
mode_option, NULL, 0, NULL, bpp)) {
|
|
err = -EINVAL;
|
|
goto out_unmap2;
|
|
}
|
|
err = fb_alloc_cmap(&info->cmap, 256, 0);
|
|
if (err < 0)
|
|
goto out_unmap2;
|
|
|
|
if (defaultaccel && default_par->init_accel)
|
|
info->var.accel_flags |= FB_ACCELF_TEXT;
|
|
else
|
|
info->var.accel_flags &= ~FB_ACCELF_TEXT;
|
|
info->var.activate |= FB_ACTIVATE_NOW;
|
|
info->device = &dev->dev;
|
|
if (register_framebuffer(info) < 0) {
|
|
printk(KERN_ERR "tridentfb: could not register Trident framebuffer\n");
|
|
fb_dealloc_cmap(&info->cmap);
|
|
err = -EINVAL;
|
|
goto out_unmap2;
|
|
}
|
|
output("fb%d: %s frame buffer device %dx%d-%dbpp\n",
|
|
info->node, info->fix.id, info->var.xres,
|
|
info->var.yres, info->var.bits_per_pixel);
|
|
|
|
pci_set_drvdata(dev, info);
|
|
return 0;
|
|
|
|
out_unmap2:
|
|
if (info->screen_base)
|
|
iounmap(info->screen_base);
|
|
release_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len);
|
|
disable_mmio(info->par);
|
|
out_unmap1:
|
|
if (default_par->io_virt)
|
|
iounmap(default_par->io_virt);
|
|
release_mem_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len);
|
|
framebuffer_release(info);
|
|
return err;
|
|
}
|
|
|
|
static void __devexit trident_pci_remove(struct pci_dev *dev)
|
|
{
|
|
struct fb_info *info = pci_get_drvdata(dev);
|
|
struct tridentfb_par *par = info->par;
|
|
|
|
unregister_framebuffer(info);
|
|
iounmap(par->io_virt);
|
|
iounmap(info->screen_base);
|
|
release_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len);
|
|
release_mem_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len);
|
|
pci_set_drvdata(dev, NULL);
|
|
framebuffer_release(info);
|
|
}
|
|
|
|
/* List of boards that we are trying to support */
|
|
static struct pci_device_id trident_devices[] = {
|
|
{PCI_VENDOR_ID_TRIDENT, BLADE3D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBERBLADEi7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBERBLADEi7D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBERBLADEi1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBERBLADEi1D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBERBLADEAi1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBERBLADEAi1D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBERBLADEE4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, TGUI9660, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, IMAGE975, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, IMAGE985, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBER9320, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBER9388, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBER9520, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBER9525DVD, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBER9397, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBER9397DVD, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBERBLADEXPAi1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBERBLADEXPm8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{PCI_VENDOR_ID_TRIDENT, CYBERBLADEXPm16, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{0,}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, trident_devices);
|
|
|
|
static struct pci_driver tridentfb_pci_driver = {
|
|
.name = "tridentfb",
|
|
.id_table = trident_devices,
|
|
.probe = trident_pci_probe,
|
|
.remove = __devexit_p(trident_pci_remove)
|
|
};
|
|
|
|
/*
|
|
* Parse user specified options (`video=trident:')
|
|
* example:
|
|
* video=trident:800x600,bpp=16,noaccel
|
|
*/
|
|
#ifndef MODULE
|
|
static int __init tridentfb_setup(char *options)
|
|
{
|
|
char *opt;
|
|
if (!options || !*options)
|
|
return 0;
|
|
while ((opt = strsep(&options, ",")) != NULL) {
|
|
if (!*opt)
|
|
continue;
|
|
if (!strncmp(opt, "noaccel", 7))
|
|
noaccel = 1;
|
|
else if (!strncmp(opt, "fp", 2))
|
|
fp = 1;
|
|
else if (!strncmp(opt, "crt", 3))
|
|
fp = 0;
|
|
else if (!strncmp(opt, "bpp=", 4))
|
|
bpp = simple_strtoul(opt + 4, NULL, 0);
|
|
else if (!strncmp(opt, "center", 6))
|
|
center = 1;
|
|
else if (!strncmp(opt, "stretch", 7))
|
|
stretch = 1;
|
|
else if (!strncmp(opt, "memsize=", 8))
|
|
memsize = simple_strtoul(opt + 8, NULL, 0);
|
|
else if (!strncmp(opt, "memdiff=", 8))
|
|
memdiff = simple_strtoul(opt + 8, NULL, 0);
|
|
else if (!strncmp(opt, "nativex=", 8))
|
|
nativex = simple_strtoul(opt + 8, NULL, 0);
|
|
else
|
|
mode_option = opt;
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int __init tridentfb_init(void)
|
|
{
|
|
#ifndef MODULE
|
|
char *option = NULL;
|
|
|
|
if (fb_get_options("tridentfb", &option))
|
|
return -ENODEV;
|
|
tridentfb_setup(option);
|
|
#endif
|
|
output("Trident framebuffer %s initializing\n", VERSION);
|
|
return pci_register_driver(&tridentfb_pci_driver);
|
|
}
|
|
|
|
static void __exit tridentfb_exit(void)
|
|
{
|
|
pci_unregister_driver(&tridentfb_pci_driver);
|
|
}
|
|
|
|
module_init(tridentfb_init);
|
|
module_exit(tridentfb_exit);
|
|
|
|
MODULE_AUTHOR("Jani Monoses <jani@iv.ro>");
|
|
MODULE_DESCRIPTION("Framebuffer driver for Trident cards");
|
|
MODULE_LICENSE("GPL");
|
|
|