0cd61b68c3
Untested, but this should fix up the bulk of the totally mechanical issues, and should make the actual detail fixing easier. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
235 lines
7.0 KiB
C
235 lines
7.0 KiB
C
/*
|
|
* linux/arch/arm/mach-omap1/time.c
|
|
*
|
|
* OMAP Timers
|
|
*
|
|
* Copyright (C) 2004 Nokia Corporation
|
|
* Partial timer rewrite and additional dynamic tick timer support by
|
|
* Tony Lindgen <tony@atomide.com> and
|
|
* Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
|
|
*
|
|
* MPU timer code based on the older MPU timer code for OMAP
|
|
* Copyright (C) 2000 RidgeRun, Inc.
|
|
* Author: Greg Lonnon <glonnon@ridgerun.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
|
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
|
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
|
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/hardware.h>
|
|
#include <asm/io.h>
|
|
#include <asm/leds.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/mach/irq.h>
|
|
#include <asm/mach/time.h>
|
|
|
|
struct sys_timer omap_timer;
|
|
|
|
/*
|
|
* ---------------------------------------------------------------------------
|
|
* MPU timer
|
|
* ---------------------------------------------------------------------------
|
|
*/
|
|
#define OMAP_MPU_TIMER_BASE OMAP_MPU_TIMER1_BASE
|
|
#define OMAP_MPU_TIMER_OFFSET 0x100
|
|
|
|
/* cycles to nsec conversions taken from arch/i386/kernel/timers/timer_tsc.c,
|
|
* converted to use kHz by Kevin Hilman */
|
|
/* convert from cycles(64bits) => nanoseconds (64bits)
|
|
* basic equation:
|
|
* ns = cycles / (freq / ns_per_sec)
|
|
* ns = cycles * (ns_per_sec / freq)
|
|
* ns = cycles * (10^9 / (cpu_khz * 10^3))
|
|
* ns = cycles * (10^6 / cpu_khz)
|
|
*
|
|
* Then we use scaling math (suggested by george at mvista.com) to get:
|
|
* ns = cycles * (10^6 * SC / cpu_khz / SC
|
|
* ns = cycles * cyc2ns_scale / SC
|
|
*
|
|
* And since SC is a constant power of two, we can convert the div
|
|
* into a shift.
|
|
* -johnstul at us.ibm.com "math is hard, lets go shopping!"
|
|
*/
|
|
static unsigned long cyc2ns_scale;
|
|
#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
|
|
|
|
static inline void set_cyc2ns_scale(unsigned long cpu_khz)
|
|
{
|
|
cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz;
|
|
}
|
|
|
|
static inline unsigned long long cycles_2_ns(unsigned long long cyc)
|
|
{
|
|
return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
|
|
}
|
|
|
|
/*
|
|
* MPU_TICKS_PER_SEC must be an even number, otherwise machinecycles_to_usecs
|
|
* will break. On P2, the timer count rate is 6.5 MHz after programming PTV
|
|
* with 0. This divides the 13MHz input by 2, and is undocumented.
|
|
*/
|
|
#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE)
|
|
/* REVISIT: This ifdef construct should be replaced by a query to clock
|
|
* framework to see if timer base frequency is 12.0, 13.0 or 19.2 MHz.
|
|
*/
|
|
#define MPU_TICKS_PER_SEC (13000000 / 2)
|
|
#else
|
|
#define MPU_TICKS_PER_SEC (12000000 / 2)
|
|
#endif
|
|
|
|
#define MPU_TIMER_TICK_PERIOD ((MPU_TICKS_PER_SEC / HZ) - 1)
|
|
|
|
typedef struct {
|
|
u32 cntl; /* CNTL_TIMER, R/W */
|
|
u32 load_tim; /* LOAD_TIM, W */
|
|
u32 read_tim; /* READ_TIM, R */
|
|
} omap_mpu_timer_regs_t;
|
|
|
|
#define omap_mpu_timer_base(n) \
|
|
((volatile omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE + \
|
|
(n)*OMAP_MPU_TIMER_OFFSET))
|
|
|
|
static inline unsigned long omap_mpu_timer_read(int nr)
|
|
{
|
|
volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
|
|
return timer->read_tim;
|
|
}
|
|
|
|
static inline void omap_mpu_timer_start(int nr, unsigned long load_val)
|
|
{
|
|
volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
|
|
|
|
timer->cntl = MPU_TIMER_CLOCK_ENABLE;
|
|
udelay(1);
|
|
timer->load_tim = load_val;
|
|
udelay(1);
|
|
timer->cntl = (MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_AR | MPU_TIMER_ST);
|
|
}
|
|
|
|
unsigned long omap_mpu_timer_ticks_to_usecs(unsigned long nr_ticks)
|
|
{
|
|
unsigned long long nsec;
|
|
|
|
nsec = cycles_2_ns((unsigned long long)nr_ticks);
|
|
return (unsigned long)nsec / 1000;
|
|
}
|
|
|
|
/*
|
|
* Last processed system timer interrupt
|
|
*/
|
|
static unsigned long omap_mpu_timer_last = 0;
|
|
|
|
/*
|
|
* Returns elapsed usecs since last system timer interrupt
|
|
*/
|
|
static unsigned long omap_mpu_timer_gettimeoffset(void)
|
|
{
|
|
unsigned long now = 0 - omap_mpu_timer_read(0);
|
|
unsigned long elapsed = now - omap_mpu_timer_last;
|
|
|
|
return omap_mpu_timer_ticks_to_usecs(elapsed);
|
|
}
|
|
|
|
/*
|
|
* Elapsed time between interrupts is calculated using timer0.
|
|
* Latency during the interrupt is calculated using timer1.
|
|
* Both timer0 and timer1 are counting at 6MHz (P2 6.5MHz).
|
|
*/
|
|
static irqreturn_t omap_mpu_timer_interrupt(int irq, void *dev_id)
|
|
{
|
|
unsigned long now, latency;
|
|
|
|
write_seqlock(&xtime_lock);
|
|
now = 0 - omap_mpu_timer_read(0);
|
|
latency = MPU_TICKS_PER_SEC / HZ - omap_mpu_timer_read(1);
|
|
omap_mpu_timer_last = now - latency;
|
|
timer_tick();
|
|
write_sequnlock(&xtime_lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct irqaction omap_mpu_timer_irq = {
|
|
.name = "mpu timer",
|
|
.flags = IRQF_DISABLED | IRQF_TIMER,
|
|
.handler = omap_mpu_timer_interrupt,
|
|
};
|
|
|
|
static unsigned long omap_mpu_timer1_overflows;
|
|
static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
|
|
{
|
|
omap_mpu_timer1_overflows++;
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct irqaction omap_mpu_timer1_irq = {
|
|
.name = "mpu timer1 overflow",
|
|
.flags = IRQF_DISABLED,
|
|
.handler = omap_mpu_timer1_interrupt,
|
|
};
|
|
|
|
static __init void omap_init_mpu_timer(void)
|
|
{
|
|
set_cyc2ns_scale(MPU_TICKS_PER_SEC / 1000);
|
|
omap_timer.offset = omap_mpu_timer_gettimeoffset;
|
|
setup_irq(INT_TIMER1, &omap_mpu_timer1_irq);
|
|
setup_irq(INT_TIMER2, &omap_mpu_timer_irq);
|
|
omap_mpu_timer_start(0, 0xffffffff);
|
|
omap_mpu_timer_start(1, MPU_TIMER_TICK_PERIOD);
|
|
}
|
|
|
|
/*
|
|
* Scheduler clock - returns current time in nanosec units.
|
|
*/
|
|
unsigned long long sched_clock(void)
|
|
{
|
|
unsigned long ticks = 0 - omap_mpu_timer_read(0);
|
|
unsigned long long ticks64;
|
|
|
|
ticks64 = omap_mpu_timer1_overflows;
|
|
ticks64 <<= 32;
|
|
ticks64 |= ticks;
|
|
|
|
return cycles_2_ns(ticks64);
|
|
}
|
|
|
|
/*
|
|
* ---------------------------------------------------------------------------
|
|
* Timer initialization
|
|
* ---------------------------------------------------------------------------
|
|
*/
|
|
static void __init omap_timer_init(void)
|
|
{
|
|
omap_init_mpu_timer();
|
|
}
|
|
|
|
struct sys_timer omap_timer = {
|
|
.init = omap_timer_init,
|
|
.offset = NULL, /* Initialized later */
|
|
};
|